3925XTA03 25GPM (1.6 LPS) 3" (76 mm) connection

25XT Models use Structured Foam Molding Technology providing rigidity and durability while reducing unit weight. Models incorporate cover pry points and latch recesses for no-tool access.

Industry leading separation efficiency based on testing to national standards. Comparable operational grease capacity (1080 lb.) to 1000 gallon Gravity GI (Concrete).*

*when maintained according to the 25% rule

With Pedestrian Rated Lids
40100A04M - 100GPM (6.3 L/Sec) 4"(110 mm) Connections
40100A04MT - 100GPM (6.3 L/Sec) 4"(110 mm) FPT Connections

Industry leading separation efficiency based on testing to national standards. Comparable operational grease capacity (1097 lb.) to 1000 gallon Gravity GI (Concrete).*

*when maintained according to the 25% rule

With Traffic Rated lids
40150A04 - 150GPM (9.5 L/Sec) 4"(110 mm) Connections
40150A04T - 150GPM 9.5 L/Sec) 4"(110 mm) FPT Connections

Industry leading separation efficiency based on testing to national standards. Comparable operational grease capacity (580 lb.) to 750 gallon Gravity GI (Concrete).*

*when maintained according to the 25% rule

With Pedestrian rated lids
4075A04M 75 GPM (4.74 L/Sec) 4"(110 mm) Connections
4075A04MT 75 GPM (4.74 L/Sec) 4"(110 mm) FPT Connections

Industry leading separation efficiency based on testing to national standards. Comparable operational grease capacity (580 lb.) to 750 gallon Gravity GI (Concrete).* *when maintained according to the 25% rule

With Traffic Rated lids
4075A04 75 GPM (4.74 L/Sec) 4"(110 mm) Connections
4075A04T 75 GPM (4.74 L/Sec) 4"(110 mm) FPT Connections

3950A04 50GPM (3.2 LPS) 4" (110 mm) connection

A tall version of our 35gpm model the 50gpm interceptor uses common parts incorporating all the best features of the Endura® product design in a comparatively light weight solution to that of its metal competitors.

3950A03 50GPM (3.2 LPS) 3" (76 mm) connection

A tall version of our 35gpm model the 50gpm interceptor uses common parts incorporating all the best features of the Endura® product design in a comparatively light weight solution to that of its metal competitors.

3935A04 35GPM (2.2 LPS) 4" (110 mm) connection

Patented Diffuser Baffle adds separation at increased flow rates within a compact footprint

3935A03 35GPM (2.2 LPS) 3" (76 mm) connection

Patented Diffuser Baffle adds separation at increased flow rates within a compact footprint

3925A02LO 25GPM (1.6 LPS) 2" (51 mm) connection

Endura® Lo-PRO is for tight on-floor applications where space is at a premium. Same dimensional footprint as 35gpm and 50gpm Endura models. Overall height 11 inches, still meeting requirements of ASME112.14.3. Internal components can be removed in less than 6" of additional clearance.

3920A02 20GPM (1.26 LPS) 2" (51 mm) connection

Our original tank, 20gpm units are perhaps the most commonly installed product. It suits both on-floor and in-floor applications.

3915A02 - 15GPM (0.94 LPS) 2" (51 mm) connection

Our larger 15GPM model offers users greater capacity than the compact version. Utilizing the same tank as our 20GPM interceptor, this unit can be installed above grade, semi-recessed or below-grade installations; accommodating riser extensions up to 18".

3910A02 - 10GPM (0.63 LPS) 2" (51 mm) connection

Compact models use a development of the patented Endura baffle system to enhance separation performance at low flow rates. EZ-Clean tank design - Aids exterior cleaning.

3907A02 - 7GPM (0.44 LPS) 2" (51 mm) connection

Compact models use a development of the patented Endura baffle system to enhance separation performance at low flow rates. EZ-Clean tank design - Aids exterior cleaning.

4" or 6" connection options

Designed for installation as an effluent sampling point downstream from the grease interceptor. Comes with a choice of 6 outlets allows for 90 degrees directional changes from inlet. Along with, 8" displacement between upper and lower connections for new installations. Compatible with XL rlser system.

4" or 6" connection options

Designed for installation as an effluent sampling point downstream from the grease interceptor. Comes with a choice of 6 outlets allows for 90 degrees directional changes from inlet. Along with, 8" displacement between upper and lower connections for new installations. Compatible with XL riser system.

4" or 6" connection options

Designed for installation as an effluent sampling point downstream from the grease interceptor. Comes with a choice of 6 outlets allows for 90 degrees directional changes from inlet. Along with, 8" displacement between upper and lower connections for new installations. Compatible with 15" SDR 35 pipe as a riser.