commercial HVAC systems

CONTACT INFO

215 Metropolitan Dr.
West Columbia, SC 29170
Toll Free: 800-448-5872
Request information
Schedule a meeting with local rep
Request a catalog

CONTENT

cad details CAD DETAILS
bim - revitBIM FILES
csi specsSPECIFICATIONS
catalogs / brochuresCATALOGS

WARRANTY

Click Here for Warranty Information

PRODUCTS RELATED TO YOUR SEARCH

COMPANY OVERVIEW

Located in South Carolina and Arkansas, Allied Commercial builds technologically advanced, solid commercial heating and cooling equipment. Our solutions continue to offer best of everything including:

Components and parts that are well designed and laboratory tested for strength and endurance, so every piece of equipment that comes off of our assembly lines upholds our high standards.

Easy installation and service, with features like compatibility with most popular curb sizes and convenient utility line locations.

Lasting performance and consistent energy efficiency, season after season, even in extreme heat or cold. Our efforts have produced impressive advancements in the industry, such as the Eco-Last™ Coil System and Single-Zone Variable Air Volume (VAV) technology.

ALL PRODUCTS

{{this.show}} {{this.hide}} Packaged Rooftop Units

E-Series™ Rooftop Units image

E-Series™ Rooftop Units

The E-Series™
  • Efficiency ratings of up to 15 EER, 22 IEER, and 23.5 SEER.
  • 3- to 50-ton gas/electric and electric/electric models
  • Up to 81% AFUE

Why the E-Series stands out
  • ENERGY STAR™ qualified
  • Exceeds ASHRAE 90.1-2013 minimum standards by more than 38%
  • Single-Zone VAV (Variable Air Volume) supply fan technology*
      o Up to 61% power savings over comparable units
      o 29% better moisture removal for humidity control
  • Eco-Last™ Coil System uses up to 52% less refrigerant, is up to 59% lighter, and has up to 20% fewer brazed joints than regular rooftop coils
  • Patented dehumidification system
  • Intelli-Guide™ unit controller verifies service, operation, required setup, and configuration with precision
  • Unique WireRight™ system helps ensure the most accurate setup and the least service time
  • Helps buildings qualify for the most LEED™ points
  • 1-year limited warranty on covered components
  • 3-year limited warranty on Eco-Last Coil System
  • 3-yearyear limited warranty on Intelli-Guide unit controller
  • 5-year limited warranty on compressor
  • 10-year limited warranty on aluminized gas heat exchanger
  • 15-year limited warranty on stainless steel gas heat exchanger

*At 55% airflow when compared to full load
CAD BIM SPECS CATALOGS
K-Series™ Rooftop Units image

K-Series™ Rooftop Units

The K-Series™
  • Up to 16.5 SEER, 14.8 IEER and 13.0 EER
  • 2- to 25-ton gas/electric, electric/electric and heat pump models
  • Standard- and high-efficiency units available

Why the K-Series stands out
  • Single-Zone VAV (Variable Air Volume) supply fan technology*
      o Up to 61% power savings over comparable units
      o 29% better moisture removal for humidity control when compared to systems with conventional supply fan motors
  • Eco-Last™ Coil System uses up to 52% less refrigerant, is up to 59% lighter, and has up to 20% fewer brazed joints than regular rooftop unit coils (standard on KC and KG models)
  • Isolated compressor for quieter operation and easier service
  • Easy-to-reach gas compartment for quick, simplified diagnostics and serviceability
  • More than 100 field-selectable options ensure fast and easy installation
  • High-pressure switch guards the compressor from extreme operating conditions
  • 15-year limited warranty on stainless steel gas heat exchanger
  • 10-year limited warranty on aluminized gas heat exchanger
  • 5-year limited warranty on compressor
  • 3-year limited warranty on Eco-Last Coil System
  • 1-Year Limited Warranty on covered components

*Part load, IEER improvement at 67% airflow when compared to full load
CAD BIM SPECS CATALOGS
Z-Series™ Rooftop Units image

Z-Series™ Rooftop Units

The Z-Series™
  • Up to 14.0 SEER, 15.0 IEER and 11.7 EER
  • 3- to 12.5-ton gas/electric and electric/electric models and 3- to 10-ton heat pump models available
  • Industry standard design and footprint

Why the Z-Series stands out
  • Single-Zone VAV (Variable Air Volume) supply fan technology available with 7.5- to 12.5-ton models*
      o Up to 61% power savings over comparable units
      o 29% better moisture removal for humidity control when compared to systems with conventional supply fan motors
  • Optional BACnet compatibility on 7.5- to 12.5-ton models
  • Eco-Last™ Coil System uses up to 52% less refrigerant, is up to 59% lighter, and has up to 20% fewer brazed joints than regular rooftop unit coils (standard on ZC and ZG models)
  • 18% lighter than other like units**
  • Goes through a 200-point quality check
  • High-pressure switch guards the compressor from extreme operating conditions
  • Proven scroll compressor helps long-term operation
  • Tool-less access to filters allows for easy service
  • Common utility connection points allow for faster and easier installations
  • 10-year limited warranty on aluminized gas heat exchanger
  • 5-year limited warranty on compressor
  • 3-year limited warranty on Eco-Last Coil System
  • 1-year limited warranty on covered components

*Part load, IEER improvement at 67% airflow when compared to full load.
**Comparison is based on 5-ton gas/electric model versus other 5-ton gas/electric models.
CAD BIM SPECS CATALOGS

{{this.show}} {{this.hide}} Split Systems

T-Series™ image

T-Series™

The T-Series™
  • Up to 11.7 EER
  • Largest Allied Commercial™ split system available, ranging from 6 to 20 tons
  • Power savings with the optional Single-Zone VAV supply fan

Why the T-Series stands out
  • Proven scroll compressors for smooth operation
  • Easy-access panels for convenient maintenance and service
  • Dual refrigeration circuits (in 10-20 ton capacity units)
  • Single-Zone VAV (Variable Air Volume) supply fan technology available on 7.5- to 20-ton models*
      o Up to 61% power savings over comparable units
      o 29% better moisture removal for humidity control when compared to systems with conventional supply fan motors
  • 5-year limited warranty on compressor
  • 1-year limited warranty on covered components

*Part load, IEER improvement at 67% airflow when compared to full load
CAD BIM SPECS CATALOGS
Small Split image

Small Split

The Small Split
  • Up to 11.0 EER, 7.7 HSPF
  • 3- to 5-ton units available

Why the Small Split stands out
  • A variety of accessories like compressor sound covers and TXV kits
  • All serviceable brass fittings
  • Lanced fins and rifled tubing provide exceptional heat transfer and low air resistance for high-efficiency operation
  • Quiet Shift™ Technology allows the heat pump to enter defrost mode without the excessive noise
  • Proven scroll compressor helps long-term operation
  • High-pressure switch prevents operation of cooling section in the event that refrigerant pressures exceed safe levels, protecting the compressor
  • Low-Pressure Switch extends the life of the compressor by safeguarding against loss of charge
  • Corner mounted service ports make brazing easier
  • Two-screw panel removal for quicker access and cleaning
  • 5-year limited warranty on compressor
  • 1-year limited warranty on covered components and units
SPECS CATALOGS

{{this.show}} {{this.hide}} Unit Heaters

LF24 Unit Heater image

LF24 Unit Heater

The LF24 Unit Heater
  • Up to 81% AFUE
  • Heat capacity from 30,000-390,000 Btuh
  • Compact and standard models available

Why the LF24 Unit Heater stands out
  • Compact units have an efficiency rating of 81% AFUE
  • Standard units have an efficiency rating of 80.5% AFUE
  • Tubular heat exchanger is designed for high thermal efficiency with low wear over time
      o Curved design exposes the heating surface, resulting in excellent heat transfer
      o Rounded surfaces reduce air resistance, creating more even heating and reduced metallic stress
  • Easily cleaned in-shot burner assembly
  • Permanently lubricated blower motor offers solid performance with no maintenance
  • Units may be vented horizontally or vertically for application flexibility
  • Fully factory run-tested
  • 15-year limited warranty on stainless steel heat exchanger
  • 10-year limited warranty on aluminized heat exchanger
  • 1-year limited warranty on covered components
SPECS CATALOGS

{{this.show}} {{this.hide}} Industrial Furnaces

LG14 Industrial Furnace image

LG14 Industrial Furnace

The LG14 Industrial Furnace
  • Up to 81% AFUE
  • Upflow or downflow operation
  • Heating capacities of 225,000 to 445,000 BTU/hour

Why the LG14 Industrial Furnace stands out
  • Units can be installed vertically or horizontally for site application flexibility
  • Stainless Steel heat exchanger for maximum durability
  • Removable panels allow easy access to the motor for service and clean-out
  • Twin blowers are mounted on rails for service from either side
  • Internal overload protection for the motor, primary and secondary fan and limit controls
  • 1 year limited parts warranty
  • 5 year limited heat exchanger warranty
SPECS CATALOGS

{{this.show}} {{this.hide}} LEEDŽ Points

LEED® Points

Allied Commercial means energy-efficient options.
Heating and cooling equipment designed to make a difference.
Short for Leadership in Energy and Environmental Design, LEED is a third-party independent certification program created to guide the construction, design and daily operation of environmentally conscious buildings.

LEED-certified buildings are designed to:
  • Lower operating costs and increase asset value
  • Reduce waste sent to landfills
  • Conserve energy and water
  • Be healthier and safer for occupants
  • Reduce harmful greenhouse gas emissions
  • Qualify for tax rebates, zoning allowances and other incentives in hundreds of cities

LEED certification is based on 100 points distributed across five categories: Sustainable Sites, Water Efficiency, Energy and Atmosphere, Materials and Resources and Indoor Environmental Quality. HVAC is one of the best areas in which to gather LEED points, with a number of available credit opportunities to achieve the highest LEED level of designation.

Buildings that are LEED certified will use energy more efficiently than standard buildings, and as a result often enjoy tax savings or other incentives for their smart energy use. Typically, the higher their LEED certification, the more incentives they receive.

The U.S. Green Building Council remains your primary source for LEED building education, including workshops, online training, reference guides and other tools to help you achieve success. To learn more about LEED and the U.S. Green Building Council new.usgbc.org/leed
SPECS CATALOGS


password:  
Last Update: 2018-05-15