IFC building model
Schema: "IFC2X3"
Description: "ViewDefinition [CoordinationView]"
Description: "ExchangeRequirement []"
Time stamp: "2025-01-13T14:09:15"
Preprocessor: "ODA IFC SDK 22.8"
Originating system: "22.1.30.34 - Exporter 22.5.0.0 - Default UI"
Application: "Autodesk Revit 2022 (ENU)" version "2022" identifier "Revit" by Organization "Autodesk Revit 2022 (ENU)"

People and organizations
  Person "billatarcat9MS5L" of Organization (no name given)
  Owner history of Person "billatarcat9MS5L" of Organization (no name given) | application "Autodesk Revit 2022 (ENU)" version "2022" identifier "Revit" by Organization "Autodesk Revit 2022 (ENU)" | change NOCHANGE | created 1674049610 (2023-01-18T13:46:50Z)

Units
  LENGTHUNIT: FOOT (conversion based)
  AREAUNIT: SQUARE FOOT (conversion based)
  VOLUMEUNIT: CUBIC FOOT (conversion based)
  PLANEANGLEUNIT: DEGREE (conversion based)
  MASSUNIT: KILO GRAM
  MASSDENSITYUNIT: derived
  MOMENTOFINERTIAUNIT: derived
  TIMEUNIT: SECOND
  FREQUENCYUNIT: HERTZ
  THERMODYNAMICTEMPERATUREUNIT: DEGREE_CELSIUS
  THERMALTRANSMITTANCEUNIT: derived
  VOLUMETRICFLOWRATEUNIT: derived
  MASSFLOWRATEUNIT: derived
  ROTATIONALFREQUENCYUNIT: derived
  ELECTRICCURRENTUNIT: AMPERE
  ELECTRICVOLTAGEUNIT: VOLT
  POWERUNIT: WATT
  FORCEUNIT: NEWTON
  ILLUMINANCEUNIT: LUX
  LUMINOUSFLUXUNIT: LUMEN
  LUMINOUSINTENSITYUNIT: CANDELA
  USERDEFINED: derived "Luminous Efficacy"
  SOUNDPOWERUNIT: derived
  LINEARVELOCITYUNIT: derived
  PRESSUREUNIT: PASCAL
  USERDEFINED: derived "Friction Loss"
  LINEARFORCEUNIT: derived
  PLANARFORCEUNIT: derived

Spatial structure
IFCPROJECT
  IFCSITE "Default" | latitude 42° 24′ 53.508911″ | longitude -71° 15′ 29.058837″ | elevation above sea level 0.
    IFCBUILDING | postal address (none given)
      IFCBUILDINGSTOREY "Level 1" | long name "Level 1" | object type "Level:Level 1" | elevation 0.
        contains 1 element
          1 x IFCFURNISHINGELEMENT | type IFCFURNITURETYPE "Chair-Hussey-Quattro-Soft_Side-3D:Chair-Hussey-Quattro-Soft_Side-3D" | object type "Chair-Hussey-Quattro-Soft_Side-3D:Chair-Hussey-Quattro-Soft_Side-3D" | names: "Chair-Hussey-Quattro-Soft_Side-3D:Chair-Hussey-Quattro-Soft_Side-3D:580456" | material: materials ("<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "Hussey - Seat Pad - Generic", "Hussey - Seat Pad - Generic") | property sets: Pset_ManufacturerTypeInformation, Pset_ProductRequirements, Pset_QuantityTakeOff, Pset_FurnitureTypeCommon, Constraints, Dimensions

Types
  IFCFURNITURETYPE "Chair-Hussey-Quattro-Soft_Side-3D:Chair-Hussey-Quattro-Soft_Side-3D" | 1 occurrence | material: materials ("<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "<Unnamed>", "Hussey - Seat Pad - Generic", "Hussey - Seat Pad - Generic") | property sets: Constraints, Dimensions, Identity Data, Materials and Finishes, Model Properties, Other

Property sets
  Pset_ProductRequirements | properties | on 2 objects (1 IFCBUILDING, 1 IFCSITE)
    Category = "Project Information" (IFCLABEL)
  Pset_ProductRequirements | properties | on 1 object (1 IFCFURNISHINGELEMENT) | on 1 type object
    Category = "Furniture" (IFCLABEL)
  Pset_ProductRequirements | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Category = "Levels" (IFCLABEL)
    Name = "Level 1" (IFCLABEL)
  Other | properties | on 2 objects (1 IFCBUILDING, 1 IFCSITE)
    Category = "Project Information" (IFCLABEL)
  Other | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Category = "Furniture" (IFCLABEL)
    Family = "Chair-Hussey-Quattro-Soft_Side-3D" (IFCLABEL)
    Family and Type = "Chair-Hussey-Quattro-Soft_Side-3D: Chair-Hussey-Quattro-Soft_Side-3D" (IFCLABEL)
    Type = "Chair-Hussey-Quattro-Soft_Side-3D" (IFCLABEL)
    Type Id = "580441" (IFCLABEL)
    Width Adjustment Constraint = 0.1875 (IFCLENGTHMEASURE) [FOOT (conversion based)]
  Other | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Category = "Levels" (IFCLABEL)
    Family = "Level" (IFCLABEL)
    Family and Type = "Level: Level 1" (IFCLABEL)
    Type = "Level 1" (IFCLABEL)
    Type Id = "1582" (IFCLABEL)
  Other | properties | on 1 type object
    Category = "Furniture" (IFCLABEL)
    Family Name = "Chair-Hussey-Quattro-Soft_Side-3D" (IFCTEXT)
  Pset_ManufacturerTypeInformation | properties | on 1 object (1 IFCFURNISHINGELEMENT) | on 1 type object
    Manufacturer = "Hussey Seating Company" (IFCLABEL)
  Pset_QuantityTakeOff | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Reference = "Chair-Hussey-Quattro-Soft_Side-3D" (IFCIDENTIFIER)
  Pset_FurnitureTypeCommon | properties | on 1 object (1 IFCFURNISHINGELEMENT) | on 1 type object
    Description = "Quattro Collection" (IFCTEXT)
  Constraints | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Elevation from Level = 0. (IFCLENGTHMEASURE) [FOOT (conversion based)]
    Host = "None" (IFCTEXT)
    Moves With Nearby Elements = FALSE (IFCBOOLEAN)
    Offset from Host = 0. (IFCLENGTHMEASURE) [FOOT (conversion based)]
  Constraints | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Elevation = 0. (IFCLENGTHMEASURE) [FOOT (conversion based)]
  Constraints | properties | on 1 type object
    Default Elevation = 0. (IFCLENGTHMEASURE) [FOOT (conversion based)]
  Dimensions | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Area = 40.792973594609485 (IFCAREAMEASURE) [SQUARE FOOT (conversion based)]
    Back Height = 3. (IFCLENGTHMEASURE) [FOOT (conversion based)]
    Closed Envelope Dimension = 1.7500000000000002 (IFCLENGTHMEASURE) [FOOT (conversion based)]
    Seat Width = 1.7500000000000002 (IFCLENGTHMEASURE) [FOOT (conversion based)]
    Volume = 1.6385364839689944 (IFCVOLUMEMEASURE) [CUBIC FOOT (conversion based)]
  Dimensions | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Computation Height = 0. (IFCLENGTHMEASURE) [FOOT (conversion based)]
  Dimensions | properties | on 1 type object
    Floor Slope Angle = 0. (IFCPLANEANGLEMEASURE) [DEGREE (conversion based)]
    Seat Back Angle = 21. (IFCPLANEANGLEMEASURE) [DEGREE (conversion based)]
    Seat Back Angle Note = "15°, 18° or 21°" (IFCTEXT)
    Seat Width Note = "19'', 20'', 21'', 22'', 23'', or 24''" (IFCTEXT)
  General | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    1 Round Upholstered Outer = TRUE (IFCBOOLEAN)
    1 Soft Square Upholstered Outer = FALSE (IFCBOOLEAN)
    2 Horizontal Pleat = FALSE (IFCBOOLEAN)
    2 Quilting Style 1 = FALSE (IFCBOOLEAN)
    2 Quilting Style 2 = FALSE (IFCBOOLEAN)
    2 Quilting Style 3 = FALSE (IFCBOOLEAN)
    2 Quilting Style 4 = FALSE (IFCBOOLEAN)
    2 Waterfall = FALSE (IFCBOOLEAN)
    3 Contoured Foam = FALSE (IFCBOOLEAN)
    3 Standard Cut 2'' = FALSE (IFCBOOLEAN)
    3 Standard Cut 3'' = FALSE (IFCBOOLEAN)
    4 High = TRUE (IFCBOOLEAN)
    4 Low = FALSE (IFCBOOLEAN)
    5 Fully Enveloped Seat = FALSE (IFCBOOLEAN)
    5 Standard Seat = TRUE (IFCBOOLEAN)
    5a Quilting Style 1 = FALSE (IFCBOOLEAN)
    5a Quilting Style 2 = FALSE (IFCBOOLEAN)
    5a Quilting Style 3 = FALSE (IFCBOOLEAN)
    5a Quilting Style 4 = FALSE (IFCBOOLEAN)
    5a Waterfall = FALSE (IFCBOOLEAN)
    5b Plush Seat Foam = FALSE (IFCBOOLEAN)
    5b Standard Seat Foam = FALSE (IFCBOOLEAN)
    5b Ultra Plush Seat Foam = FALSE (IFCBOOLEAN)
    6 Nostalgia = FALSE (IFCBOOLEAN)
    6 Precision Cast Aluminum = FALSE (IFCBOOLEAN)
    6 Steel = FALSE (IFCBOOLEAN)
    6a Floor Mounted = TRUE (IFCBOOLEAN)
    6a High Rise = FALSE (IFCBOOLEAN)
    6a Low Rise = FALSE (IFCBOOLEAN)
    7 Nostalgia Scrolled Wood Arm = FALSE (IFCBOOLEAN)
    7 Polymer Armrest = FALSE (IFCBOOLEAN)
    7 Upholstered Armrest = FALSE (IFCBOOLEAN)
    7 Wood Armrest = FALSE (IFCBOOLEAN)
    7a Front Mount Cup Holder = TRUE (IFCBOOLEAN)
    7a No Cup Holder = FALSE (IFCBOOLEAN)
    7a Rear Mount Cup Holder = FALSE (IFCBOOLEAN)
  Graphics | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Show Armrest Left = TRUE (IFCBOOLEAN)
    Show Armrest Right = FALSE (IFCBOOLEAN)
    Show Axis Point Left = TRUE (IFCBOOLEAN)
    Show Axis Point Right = FALSE (IFCBOOLEAN)
    Show Cup Holder Front Left = TRUE (IFCBOOLEAN)
    Show Cup Holder Front Right = FALSE (IFCBOOLEAN)
  Model Properties | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    1 Series = "R6" (IFCTEXT)
    2 Back Tailoring = "A" (IFCTEXT)
    3 Back Foam = "S2" (IFCTEXT)
    4 Back Height = "H" (IFCTEXT)
    5 Seat = "3" (IFCTEXT)
    5a Seat Tailoring = "A" (IFCTEXT)
    5b Seat Foam = "S" (IFCTEXT)
    6 Standard = "A" (IFCTEXT)
    6a Slope = "F0" (IFCTEXT)
    7 Armrest = "P" (IFCTEXT)
    7a Cup Holder = "FC" (IFCTEXT)
  Model Properties | properties | on 1 type object
    Series = "Soft Side" (IFCTEXT)
  Phasing | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Phase Created = "New Construction" (IFCLABEL)
  Visibility | properties | on 1 object (1 IFCFURNISHINGELEMENT)
    Not Show Cup Holder Front Left = FALSE (IFCBOOLEAN)
    Not Show Cup Holder Front Right = TRUE (IFCBOOLEAN)
    Round High = TRUE (IFCBOOLEAN)
    Round Low = FALSE (IFCBOOLEAN)
    Square High = FALSE (IFCBOOLEAN)
    Square Low = FALSE (IFCBOOLEAN)
  Pset_AirSideSystemInformation | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Name = "Level 1" (IFCLABEL)
  Pset_BuildingStoreyCommon | properties | on 1 object (1 IFCBUILDINGSTOREY)
    AboveGround = UNKNOWN (IFCLOGICAL)
  Identity Data | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Building Story = TRUE (IFCBOOLEAN)
    Name = "Level 1" (IFCTEXT)
    Structural = FALSE (IFCBOOLEAN)
  Identity Data | properties | on 1 type object
    Assembly Code = "E2010500" (IFCTEXT)
    Assembly Description = "" (IFCTEXT)
    BIM Version = "v3.1" (IFCTEXT)
    BIM Version Available (Earliest) = "2017" (IFCTEXT)
    CSI MasterFormat = "12 61 00" (IFCTEXT)
    Code Name = "" (IFCTEXT)
    Copyright Notice = "© Hussey Seating Co. All Rights Reserved." (IFCTEXT)
    Created By = "Revitus" (IFCTEXT)
    Creator URL = "http://www.revituspro.com/" (IFCTEXT)
    Description = "Quattro Collection" (IFCTEXT)
    Manufacturer = "Hussey Seating Company" (IFCTEXT)
    Manufacturer Address 1 = "38 Dyer Street Extension" (IFCTEXT)
    Manufacturer Address 2 = "North Berwick, Maine 03906" (IFCTEXT)
    Manufacturer Email Contact = "mailto:revit@husseyseating.com?Subject=Revit Inquiry" (IFCTEXT)
    Manufacturer Phone Number = "1.800.341.0401" (IFCTEXT)
    OmniClass Number = "23.40.50.11.11.11" (IFCTEXT)
    OmniClass Title = "Fixed Audience Seating" (IFCTEXT)
    Product Brochure PDF = "http://www.hscedocs.com/quattro/index.html" (IFCTEXT)
    Product Page URL = "http://www.husseyseating.com/quattro-collection-auditorium/" (IFCTEXT)
    Quattro Literature Downloads = "http://www.husseyseating.com/quattro-literature/" (IFCTEXT)
    Type Name = "Chair-Hussey-Quattro-Soft_Side-3D" (IFCTEXT)
    URL = "http://www.husseyseating.com/" (IFCTEXT)
  Pset_BuildingCommon | properties | on 1 object (1 IFCBUILDING)
    IsLandmarked = UNKNOWN (IFCLOGICAL)
    NumberOfStoreys = 1 (IFCINTEGER)
  Constraints(Type) | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Elevation Base = "Project Base Point" (IFCIDENTIFIER)
  Graphics(Type) | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Color = 0 (IFCINTEGER)
    Line Pattern = "Solid" (IFCLABEL)
    Line Weight = "1" (IFCIDENTIFIER)
    Symbol at End 1 Default = FALSE (IFCBOOLEAN)
    Symbol at End 2 Default = TRUE (IFCBOOLEAN)
  Identity Data(Type) | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Type Name = "Level 1" (IFCTEXT)
  Other(Type) | properties | on 1 object (1 IFCBUILDINGSTOREY)
    Category = "Levels" (IFCLABEL)
    Family Name = "Level" (IFCTEXT)
  Materials and Finishes | properties | on 1 type object
    Seat Back Finish = "Hussey - Seat Pad - Generic" (IFCLABEL)
    Seat Back Outer Finish = "Hussey - Seat Pad - Generic" (IFCLABEL)
    Seat Pad Finish = "Hussey - Seat Pad - Generic" (IFCLABEL)
  Text | properties | on 1 type object
    Designer Guide = "Refer to Product Selector Worksheet for all Options" (IFCTEXT)
    Finish Options Website Link = "http://204.239.146.105/SurfaceMaterialSelector/default.aspx?product=Quattro" (IFCTEXT)
    Product Selector Worksheet Link = "http://www.husseyseating.com/storage/literature/quattro/Quattro%20Pro%20Sel%20Web.pdf" (IFCTEXT)