The T. Clear/FinPan Green / LEED contributing building products - Click on the product details below to view data that can contribute LEED credits to a building project's LEED certification.

T. Clear/FinPan
CONTENT
LightGUARD® Protected Membrane Roof (PMR) Insulation Panels image

LightGUARD® Protected Membrane Roof (PMR) Insulation Panels

LIGHTGUARD® PMR roof panels provide both insulation and lightweight ballast for Protected Membrane Roof Systems. Panels are composed of Dow Styrofoam with a 3/8-inch latex-modified concrete topping on a 2'x4' tongue-and-groove panel, weighing 4.5 lb. per square foot per panel.For Technical Information Click Here
Rated 5 based on 1 product reviews
HeavyGUARD® Protected Membrane Roof (PMR) Insulation Panels image

HeavyGUARD® Protected Membrane Roof (PMR) Insulation Panels

HEAVYGUARD® PMR panels provide both insulation and heavyweight ballast for Protected Membrane Roof Systems. Panels are composed of Dow Styrofoam with a 15/16-inch latex-modified concrete topping on a 2'x4' tongue-and-groove panel, weighing 11 lb. per square foot per panel.For Technical Information Click Here
Rated 5 based on 1 product reviews
ProGUARD® Concrete Insulated Sheathing Panels image

ProGUARD® Concrete Insulated Sheathing Panels

ProGUARD® wall panels consist of a lightweight, impact-resistant concrete sheet laminated to a continuous layer of rigid insulation  providing a wall system that installs faster than conventional building techniques. ProGUARD® Insulated Sheathing Panels also provide superior thermal protection with shiplapped edges that eliminate thermal breaks. All joints are sealed with acrylic waterproofing and fiberglass mesh, providing an airtight seal.For Technical Information Click Here
Rated 5 based on 1 product reviews
WallGUARD® Concrete Faced Insulated Perimeter Wall Panels image

WallGUARD® Concrete Faced Insulated Perimeter Wall Panels

WallGuard® is manufactured using Dow Styrofoam extruded polystyrene insulation, with a factory-applied 5/16-inch latex-modified concrete coating. Panels are 2'x4' with tongue-and-groove edges on the 4' length.For Technical Information Click Here
Rated 5 based on 1 product reviews
ThermaDRY® Insulating Drainage Panels image

ThermaDRY® Insulating Drainage Panels

T. Clear insulating drainage panels are manufactured with a series of closely spaced vertical and horizontal channels that help direct ground water flow to the drain. Adhered to the channeled surface is a spunbonded geotextile filtration fabric preventing soil from entering and clogging the channels. Mineral wool and glass fiber drainage products deform when compressive load is applied. THERMADRY® Insulating Drainage Panels withstand compressive loads limits with deformation to less than 1.5% over a 20-year time frame. As a result, high drainage rates and insulation values are maintained.For Technical Information Click Here
Rated 5 based on 1 product reviews
ProTEC® Concrete Backer Board image

ProTEC® Concrete Backer Board

The T. Clear ProTEC® Concrete Backer Board provides a well-engineered alternative to conventional lumber framing systems for residential and light commercial structures.
Rated 5 based on 1 product reviews