The Cable Connection (The) - Ultra-Tec Cable Railings Green / LEED contributing building products - Click on the product details below to view data that can contribute LEED credits to a building project's LEED certification.

Cable Connection (The) - Ultra-Tec Cable Railings
CONTENT
Cable Connection (The) - Ultra-Tec Cable Railings
CONTENT
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Push-Lock® Turnbuckle Hanger Bolt

The Push-Lock® Turnbuckle Hanger Bolt is an exposed, swageless, tensioning, face-mounted fitting that is suitable for level runs only, and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Invisiware® Receiver and Stud

The Invisiware® Receiver with Invisiware® Threaded Swaging Stud combination is a concealed, swaged, tensioning, through-the-post-mounted fitting that is suitable for level or pitched runs, and is available for wood applications in 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Threaded Eye

The Adjust-A-Body® with Threaded Eye is a swaged, tensioning, face-of-the-post-mounted fitting that can be used on level or pitched runs. This fitting is available for 1/8'", 3/16'", and 1/4'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-A-Jaw®

The Adjust-A-Jaw® is a swaged, tensioning, face-of-the-post-mounted fitting that can be used on level or pitched runs. This fitting is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Invisiware® Radius Ferrule

The Invisiware® Radius Ferrule is a concealed, swaged, nontensioning, through-the-post-mounted fitting that is suitable for pitched or level runs. This fitting is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Fixed Jaw and Clip-On Fixed Jaw

The Fixed Jaw is an exposed, swaged, non-tensioning, face of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Hanger Bolt

The Adjust-A-Body® with Hanger Bolt is a swaged, tensioning, face-of-the-post-mounted fitting that is recommended for level runs only. This fitting is available for 1/8'", 3/16'", and 1/4'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Push-Lock® Turnbuckle Threaded Eye

The Push-Lock® Turnbuckle Threaded Eye is an exposed, swageless, tensioning, face-of-the-post-mounted fitting that is suitable for level or pitched runs, and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Push-Lock®

The Push-Lock® is a concealed, swageless, non-tensioning, through-the-post-mounted fitting that is suitable for use on level runs only, and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Push-Lock® Lag

New for 2016 - the Push-Lock® Lag fitting is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level runs only, and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Pull-Lock®

The Pull-Lock® is a concealed, swageless, non-tensioning, through-thepost-mounted fitting that is suitable for use on level or pitched runs, and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Push-Lock® Threaded Eye

The Push-Lock® Threaded Eye is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Fixed Jaw

Often used with our Adjust-a-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but is priced less. It can be used on level runs, stairs, and angled runs.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Extended Length Hanger Bolt

The Adjust-A-Body® with Extended Length Hanger Bolt is a swaged, tensioning, face-of-the-post-mounted fitting that is recommended for level runs only. This fitting is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Fixed Jaw

Often used with our Adjust-a-Jaw® tensioner, because it is shaped to match the clevis end on the Adjust-A-Jaw® tensioner but is priced less. It can be used on level runs, stairs, and angled runs.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Extended Length Hanger Bolt

For sleeved posts with an outside diameter of greater than 4-1/2'", use the Push-Lock® Turnbuckle with Extended Length Hanger Bolt. The extended length hanger bolt is designed to reach past sleeves and drywall to find the wood post or frame underneath.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Threaded Eye

This fitting is identical to the Push-Lock® Turnbuckle Threaded Eye for wood posts except it is used for sleeved posts with an outside diameter of greater than 4-1/2'". The extended length lag is 3'" long, designed to reach past sleeves and drywall to find the wood post or frame underneath.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Adjust-a-Body® with Threaded Eye

The mounting end on each of our Adjust-A-Body® tensioners has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-A-Jaw®

The Adjust-A-Jaw® is a swaged, tensioning, face-of-the-post-mounting fitting that can be used on level or pitched runs. This fitting is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" 1x19 stainless steel cable sizes.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Extended Length Hanger Bolt

For sleeved posts with an outside diameter of greater than 4-1/2'", use the Push-Lock® Turnbuckle with Extended Length Hanger Bolt. The extended length hanger bolt is designed to reach past sleeves and drywall to find the wood post or frame underneath.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Threaded Eye

This fitting is identical to the Push-Lock® Turnbuckle Threaded Eye for wood posts except it is used for sleeved posts with an outside diameter of greater than 4-1/2'". The extended length lag is 3'" long, designed to reach past sleeves and drywall to find the wood post or frame underneath.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Adjust-a-Body® with Threaded Eye

The mounting end on each of our Adjust-A-Body® tensioners has a male thread that mates with the female thread within the body of the tensioner. The swaging ferrule is swaged onto the cable and holds the cable inside the body. The body rotates on the cable and provides a considerable amount of take-up during tensioning with an open-end wrench. After tensioning, the lock nut locks the assembly in place.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Push-Lock® Lag

The Push-Lock® Lag fitting is an exposed, swageless, non-tensioning, face-of-the-post-mounting fitting that is suitable for use on level runs only, and is available for 1/8'" and 3/16'" 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Non-Tensioning Fittings image

Swageless Non-Tensioning Fittings - Push-Lock® Threaded Eye

They can be used with any tensioning device on the other end, and our inside-mount swageless fittings are the most economical inside solution we offer.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Concrete Anchor Bolt

The Adjust-A-Body® with Concrete Anchor Bolt is an exposed, swaged, tensioning, face-of-the -surface-mounted fitting that is recommended for level runs terminating at a concrete surface only. This fitting is available for 1/8'", 3/16'", and 1/4'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle with Anchor Bolt

The Push-Lock® Turnbuckle with Anchor Bolt is an exposed, swageless, tensioning, face-of-the-surface-mounted fitting that is suitable for level runs terminating at a concrete surface only. This fitting is available for 1/8'" and 3/16'" 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Invisiware® Radius Ferrule

The Invisiware® Radius Ferrule is a concealed, swaged, non-tensioning, through-the-post-mounted fitting that is suitable for pitched or level runs. This fitting is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Threaded Bolt

The Adjust-A-Body® with Threaded Bolt is an exposed, swaged, tensioning, face-of-the- post-mounted fitting that is recommended for level runs only. This fitting is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-a-Body® with Threaded Eye

The Adjust-A-Body® with Threaded Eye fitting is an exposed, swaged, tensioning, face-of-the-post-mounted fitting that can be used on level or pitched runs. This fitting is available for 1/8'", 3/16'", and 1/4" diameter 1x19 stainless steel cable.sizes.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Adjust-A-Jaw®

The Adjust-A-Jaw® is an exposed, swaged, tensioning, face-of-the-post-mounted fitting that can be used on level or pitched runs. This fitting is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Tensioning Fittings image

Swaged Tensioning Fittings - Invisiware® Receiver and Stud

The Invisiware® Receiver with Invisiware® Threaded Swaging Stud combination is a concealed, swaged, tensioning, through-the-post-mounted fitting that is suitable for level runs, and is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable. 1/8'" and 3/16'" sizes are also suitable for pitched applications.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Fixed Jaw and Clip-On Fixed Jaw

The Fixed Jaw is an exposed, swaged, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swaged Non-Tensioning Fittings image

Swaged Non-Tensioning Fittings - Swaging Stud

The Invisiware® Stud is a concealed, swaged, non-tensioning, inside-the-post-mounting fitting that is suitable for use on level or pitched runs and is available for 1/8'", 3/16'", 1/4'", 5/16'", and 3/8'" 1x19 stainless steel cable
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Invisiware® Receiver with Push-Lock® Stud

The Invisiware Receiver® with Push-Lock® Stud is an exposed, swageless, tensioning, through-the-post-mounted fitting that is suitable for level runs only, and is available for 1/8'" and 3/16'" 1x19 S/S cable sizes.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Threaded Bolt

The Push-Lock® fitting is a concealed, swageless, non-tensioning, through-the-post-mounted fitting that is suitable for use on level runs only, and is available for 1/8'" and 3/16'" 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
Swageless Tensioning Fittings image

Swageless Tensioning Fittings - Push-Lock® Turnbuckle Threaded Eye

The Push-Lock® Threaded Eye is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for use on level or pitched runs and is available for 1/8'" and 3/16'" diameter 1x19 stainless steel cable.
Rated 5 based on 1 product reviews
From 5' TO 60' Lengths For Wood Or Metal Posts image

From 5' TO 60' Lengths For Wood Or Metal Posts

All cable railing kits come with stainless steel cable railing hardware fittings for both ends of your cable run, all washers and fasteners necessary, choice of 1/8" or 3/16" diameter 1x19 Type 316 stainless steel cable, and installation instructions. Our Stainless Steel Cable Railing Kits are formatted specifically for common dimensioned wood and metal end posts without the need for any field swaging tools or equipment. Order the DIY cable railing kits in cable length increments of 5' to 60' lengths. You will cut the cables to their proper lengths on site. Each kit contains one cable and all associated hardware. Accessories, such as mounting tabs, cable cutters, and other installation aids and equipment are ordered separately. For coastal applications in a salt water environment, it is strongly recommended that E-Z Clean is purchased along with any kits. While Type 316 stainless steel, the most corrosion and rust-resistant stainless steel available, is used almost exclusively in our hardware, it is stain-less steel, not stain-proof. If you'"re near the ocean, some maintenance will be required.
Rated 5 based on 1 product reviews