** NOTE TO SPECIFIER ** Delete items below not required for project. Asphalt shingles and accessories for structures with attic spaces. MANUFACTURERS Acceptable Manufacturer: IKO
1. Technical inquiries for Canada 1-888-766-2468 or https://www.iko.com/na/residential-product-concerns-and-technical-inquiries-canada/
2. Technical inquiries for USA 1-888-456-7663 or https://www.iko.com/na/residential-product-concerns-us/
3. Web: www.iko.com. ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions. Substitutions: Not permitted. Requests for substitutions will be considered in accordance with provisions of Section . ** NOTE TO SPECIFIER ** Delete material not required. SHINGLES ** NOTE TO SPECIFIER ** Delete shingle not required. Delete shingle provisions not required. Shingles: Crowne Slate as manufactured by IKO. Type: Architectural Slate or Tile. Exposure: 10 inches (254 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 110 mph (177 kph). High Wind warranty upgrade to 130 mph (209 kph) available. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: ArmourShake as manufactured by IKO. Type: Dimensional. Exposure: 5-1/2 inches (140 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 110 mph (177 kph). High Wind warranty upgrade to 130 mph (209 kph) available. ICC ER - 3532 Listed. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Royal Estate as manufactured by IKO. Type: Architectural Exposure: 5-5/8 inches (143 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 110 mph (177 kph). High Wind warranty upgrade to 130 mph (209 kph) available. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Cambridge as manufactured by IKO. Type: Architectural Exposure: 5-7/8 inches (152 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 110 mph (177 kph). High Wind warranty upgrade to 130 mph (209 kph) available. ICC ER - 3532 Listed. (Sumas only) Energy Star Rating: Super White Cambridge. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Cambridge Cool Colors as manufactured by IKO. Type: Architectural Exposure: 5-7/8 inches (152 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 110 mph (177 kph). High Wind warranty upgrade to 130 mph (209 kph) available. Blue-Green Algae Resistant; Dual Grey Only. CRRC-1 SRI: 16 or greater. CRRC-1 SRI: 20 or greater. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Dynasty as manufactured by IKO. Type: Architectural. Exposure: 5-7/8 inches (152 mm). IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. Limited wind warranty coverage up to: 130 mph (209 kph). Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Marathon Plus AR as manufactured by IKO. Type: 3-tab. Exposure: 5-5/8 inches (143 mm). IKO Iron Clad Protection Period: 5 years. Limited 5-Year Algae Resistant Warranty. (AR only). Limited wind warranty coverage up to: 60 mph (97 kph). ICC ER - 3532 Listed.(Sumas only) Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles: Nordic as manufactured by IKO. Type: Architectural Polymer - Modified Asphalt Exposure: 5-7/8 inches (152 mm). FM Class No. 4473, Class 4. IKO Iron Clad Protection Period: 15 years. Limited 10-Year Algae Resistant Warranty. High Wind warranty up to 130 mph (209 kph) available. Color: As selected by Architect from manufacturer's color range available in the location of the Project. Shingles shall comply with the following performance standards and ratings. Complies with ASTM D3462. Complies with ASTM D3018. Complies with ASTM D3161 (Wind); Class F. Complies with ASTM D7158 (Wind); Class H. Complies with Fire Resistance Rating ASTM E108 (Fire) - Class A. Complies with CSA A123.5. Complies with IRC Wind Code Requirements. Color: As selected by Architect from manufacturer's color range available in the location of the Project. ** NOTE TO SPECIFIER ** Dynasty shingles do not require additional nails for the warranty. Delete paragraph if not required. To ensure coverage under the High Wind Application Limited Wind Resistance Warranty; the shingles shall be installed with additional nails, the shingles shall have an opportunity to seal or be manually sealed and starter strip shingles shall be used at all eaves and rakes. HIP AND RIDGE SHINGLES ** NOTE TO SPECIFIER ** Choose One. Delete product not required. Product: Hip and Ridge 12 Ridge Cap Shingles: A high profile self-sealing hip and ridge cap shingle matching the color of selected roof shingle. Each bundle covers approximately 33 lineal feet (10 linear meters). Product: Hip and Ridge Plus: IKO Hip and Ridge Plus Shingles are precut and include pre-tapered headlaps. Each Bundle covers 29.5 linear ft (9 linear meters). Meets ASTM D3161 Class F, ASTM D3462, ASTM E108, and CSA A123.5. Product: Ultra HP™ High Profile Ridge Cap Shingles: A high profile self-sealing hip and ridge cap shingle matching the color of selected roof shingle. Each bundle covers approximately 20 lineal feet (6.1 linear meters). Product: Ultra HP IR High Profile Ridge Cap Shingles: A high profile self-sealing hip and ridge cap shingle matching the color of selected roof shingle. Each bundle covers approximately 20 lineal feet (6.1 linear meters). Meets UL 2218 Class 4 impact resistance. Product: Marathon Series 3Tab: For use as a field fabricated ridge cap shingle and is to be from shingles matching the color of the selected roof shingle. Each bundle covers approximately 29.5 linear feet (9 linear meters). ICE AND WATER PROTECTOR ** NOTE TO SPECIFIER ** Choose One. Delete product not required. Product: GoldShield: Self-adhering, self-sealing, bituminous sheet with advanced flexibility, slip resistant surface meeting ASTM D1970. Each roll contains approx. 200 sq ft (36 inches x 66.7 feet) (18.6 sq m) (914 mm x 20.3 m). Each roll is backed by a silicone treated release film for easier installation. Product: ArmourGard: Self-adhering, self-sealing, bituminous sheet with advanced flexibility and a slip-resistant surface meeting ASTM D1970. Each roll contains approx. 195 sq ft (36 inches x 65 feet) (18.2 sq m) (914 mm x 19.8 meters). Each roll is backed by a silicone treated release film for easier installation. Product: StormShield: Self-adhering, self-sealing, bituminous sheet surfaced with a sand-fines surface. Each roll contains approx. 195 sq ft (36 inches x 65 feet) (18.1 sq m) (914 mm x 19.8 m). Each roll is backed by a silicone treated release film for easier installation. SHINGLE UNDERLAYMENT Product: IKO Stormtite Synthetic Underlayment. Product: RoofGard-Cool Grey Synthetic Underlayment. ** NOTE TO SPECIFIER ** SBS DeckBase 44 is an economical eave protection membrane beneath asphalt shingles. Delete if not required. Product: IKO SBS DeckBase 44. Inorganic, reinforcing mat made of, non-woven glass fibers, heavily coated and impregnated with SBS modified asphalt. Standards Compliance: CAN/CSA-A123.16 Asphalt coated base sheet. Type 1. ASTM D4601, Type 1 specification in all respects IBC Clause 9.26.5.2.(c). ** NOTE TO SPECIFIER ** See IKO Residential Information Bulletin R-24. Generic. Delete if not required. Product: Water repellent, breather type cellulose fiber building paper meeting or exceeding the requirements of ASTM D 226 Type I / CSA 123.3-M, No. 15 Roofing Underlayment. ** NOTE TO SPECIFIER ** Generic. Delete if not required. Product: Water repellent breather type sheathing cellulose fiber building paper meeting or exceeding the requirements of ASTM D226 Type II and/or CAN 2-51.32 No. 30 Roofing Underlayment. ** NOTE TO SPECIFIER ** Generic. Delete if not required. Product: Type I-No. 8 Underlayment: Water repellent breather type cellulose fiber building paper meeting or exceeding the requirements of ASTM D4869 Type I. ** NOTE TO SPECIFIER ** See IKO Residential Information Bulletin R-32. Generic. Delete if not required. Product: Type II-No. 13 Underlayment: Water repellent breather type cellulose fiber building paper meeting or exceeding the requirements of ASTM D4869 Type II. Underlayment Accessories: Product: EdgeSeal. Double-sided, extra-tacky adhesive creates a super strong bond to seal the drip-edge below to the shingle above to ensure the roof perimeter is securely fastened down. Standards Compliance: ASTM D1970 Size: 1 Roll: 67.3 ft (20.5 m) x 8.75 inch (222 mm) wide. Product: GoldSeam. The IKO GoldSeam tape can be applied over plywood or OSB seams as well as to cover gaps near fascia - near the eave. Standards Compliance: D1970, CSA A123.22-08 Size: 1 Roll: 67.7 ft (20.6 m) x 4.25 inch (108 mm) wide. ROOFING CEMENT Product: Asphalt Plastic Roofing Cement meeting the requirements of ASTM D 4586, Type I or II or CAN/CGSB-37.5. Product: Lap Cement meeting the requirements of ASTM D3019, Non-Asbestos-Fibered, Type III or CAN/CGSB-37.4. Product: ASTM D2822, Standard Specification for Asphalt Roof Cement. ATTIC VENTILATION ** NOTE TO SPECIFIER ** Choose One - Ridge vent shall have intake from soffits or passive ventilation. Delete vent system not indicated or required. Ridge ventilator designed to allow the passage of air out of attics. For use in conjunction with eave/ soffit intake ventilation products. Roof ventilation shall be installed as to meet building codes and as instructed from the architectural drawings. Passive Ventilation (roof louvers or equal), shall be used only as additional exhaust ventilation, or when ridge vents cannot be installed due to architecture. Install in accordance with local building codes. When local codes and application instructions are in conflict, the more stringent requirements shall take precedence. Power Ventilation (power ventilation fans or equal), shall be used only when ridge vents cannot be installed due to architecture. Install in accordance with local building codes. When local codes and application instructions are in conflict, the more stringent requirements shall take precedence. NAILS/FASTENERS Product: Standard round wire, zinc-coated steel or aluminum complying with CSB B 111 and meeting local building codes. Product: ASTM F1667 Specification for Driven Fasteners, Nails, Spikes and Staples and meeting local building codes. METAL FLASHING ** NOTE TO SPECIFIER ** Choose One. Delete product not required. Product: Hot-dip galvanized steel sheet, complying with ASTM A653/A653M and meeting local building codes. Product: Copper sheet, complying with ASTM B370 and meeting local building codes Product: Aluminum sheet, complying with ASTM B209 and meeting local building codes.