Tumbled Klassic Granite 8" Drywall.
The tumbling process softens the ends and lightens the colors of red, black, blue, grey, pink, peppered with large and tight grained configuration.
sawn height 6" (+/- ½")
6" to 24"+ random lengths, split-face, sawn and split ends
covers 14-16 sq ft per ton
Please note: Sawn Height 3 ½" and 7 ½" (+/- ½") and 3cm and 2 ¼" (+/- ¼")
This material is packaged on pallets that are random weights approximately 4,000 (3,500-4,500) pounds each.
Architectural Stone
The Aqua Grantique™ Sawn-6 Sides is a dusty blue color with areas of white quartz, olive green and rust veining.
Our Aqua Grantique™ Sawn 6-Sides is a very unique, high-end, exclusive stone. Please plan ample time for production as lead times can be extensive. The thin veneer version does not vary much in depth and will not have the variation to protrude like the full veneer can. Commonly these heights are used together: 3cm, 2 ¼“, & 3 ½", or 2 ¼“, 3 ½", & 6¼", or 3 ½" & 7 ½", or 3 ½", 7 ½", and 11 ½". Also, a dark mortar looks best.
Random Ashlars that we produce are irregular rectangular strips of stone in sizes varying from 3" to 8" heights, 6" to 30"+ lengths, and 3" to 5" depths.
100% Split-Face. Light to significant horizontal veining consisting of creamy buff, crimson and vermilion colorations.
An Approximate Blend of 40% Sandy Creek,™ 40% Highland Brown,™ & 20% Chestnut™ Ashlar.
An Approximate 60/40 blend of Highland Brown™ and Chestnut ™ Ashlar.
Chestnut™ Ashlar is split into random strips from Chestnut boulders. The coloring of this product is medium to dark brown chocolate and coffee tones. With the Chestnut Ashlar full veneer the areas where the stone is split into an ashlar is the Sandy Creek color. Make sure the mason installs the correct dark Chestnut face out in the full veneer.
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring. The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
Glacier Bay™ is tumbled Sandy Creek™ and Highland Brown.™
The tumbled texture softens the edges and give the stone an antique look. The coloring is variations of cream and tan/brown tones.
100% Naturally Weathered-Edge - Seam Face in Variations of Tan and Brown Tones. One of our most popular products!
In the Highland Brown™ product line we also have Highland Brown™ Kings Blend, Highland Brown™ Jumpers, and Highland Brown™ Bed Face available.
Sandy Creek is a Quartzite Sandstone, 100% Split-faced, a Creamy, Light Beige color which may contain little to strong Rose Gold veining. One of our most popular and economical products.
Sandy Creek™ is also available in Sandy Creek™ Jumpers and Sandy Creek™ Kings Blend. Scroll down for more information on these two products.
An approximate 60/40 blend of Highland Brown™ and Chestnut Boulder.
Please note: This blend pairs very well with timber homes.
An Approximate blend of 85% Sandy Creek™ and 15% Chestnut™ Ashlar.
An Approximate blend of 40% Highland Brown™, 40% Sandy Creek,™ & 20% Chestnut Boulder.
50% Chestnut Ashlar and 50% Chestnut Boulder
Chestnut Ashlar is split into random strips from boulders. Chestnut Boulder is a natural fieldstone boulder that is irregular in shape and size. The coloration of both products is medium to dark brown chocolate coffee tones.
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
An approximate blend of 50% Sandy Creek™ and 50% Apple Creek.™
An approximate blend of 50% Highland Brown™ and 50% Sandy Creek.™
An approximate blend of 50% Apple Creek™ and 50% Highland Brown™ Bed-Face.
An approximate blend of 60% Sandy Creek™, 25% Highland Brown™ Bed-Face, and 15% Chestnut Ashlar.
An approximate blend of 50% Highland Brown™ Webwall and 50% Chestnut Boulders.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
A rustic, irregular blend of Sandy Creek™ and some Highland Brown™
Rustic, non-uniform, more irregularity, some wedges
An approximate blend of 50% Chestnut Cobbles and 50% Glacier Bay™ Fieldstone.
An approximate blend of 50% Highland Brown™ Bed-Face, 40% Highland Brown™ Webwall, and 10% Chestnut Boulder.
Machine-split in Specific Heights of 4", 6", 8" & 12" or 6", 8", 12" & 18" (+/- ½").
An approximate blend of 60% Highland Brown™ Palace Blend & 40% Chestnut Palace Blend.
Machine-split in Specific Heights of 4", 6", 8" & 12" or 6", 8", 12" & 18" (+/- ½").
100% bed-face snapped heights with medium to dark brown chocolate and coffee tones
Chestnut™ Random Height Palace Blend 4"-14."
100% bed-face snapped heights with medium to dark brown chocolate and coffee tones.
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring. The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
Random Heights of 4" - 14"
Tumbled Highland Brown™ Palace Blend.
Machine-split in Specific Heights of 4", 6", 8" & 12" or 6", 8", 12" & 18" (+/- ½").
100% bed-face, snapped heights in color variations of brown tones of tan, auburn and cedar
Highland Brown™ Random Height Palace Blend 4"-14"
100% bed-face, snapped heights with color variations of brown tones of tan, auburn, and cedar.
Aqua Grantique™ 3cm Ledgerock and 2 ¼" Ledgerock.
100% split-face. Dark slate and dusty blue that may contain areas of olive, white quartz, and rust.
The ends are irregular, sawn and split.
Autumn Sunburst™ 1", 2", 3" Ledgerock or 2¼" Ledgerock
An approximate blend of 60/40 Highland Brown™ and Chestnut 1", 2", 3" Ledgerock, approximate percentage of heights: 15% -1", 35%- 2" and 50%- 3".
Cambrian Cream™ Sawn Height 3cm Ledgerock or 2¼" Ledgerock
100% split-face, shades of tan & buff may contain little to strong rose gold veining.
Chestnut™ 1", 2", 3" Ledgerock and 2 ¼" Ledgerock
Weathered Edge and/or Bed-Face, Medium to Dark Brown Chocolate and Coffee Tones.
Desert Blend™ 2¼" Ledgerock
An approximate blend of 50% Sandy Creek™ and 50% Highland Brown™ ledgerock.
Highland Brown™ 1",2",3" Ledgerock and 2¼" Ledgerock
100% Bed-Face, variations of brown tones - tan, auburn and cedar.
100% Split-Face. Significant horizontal veining consisting of crimson, vermilion and buff colorations.
An approximate blend of 50% Apple Creek™ Ledgerock and 50% Sandy Creek™ Ledgerock.
Aqua Blue™ Boulder veneer is a dark slate-blue rustic, irregular shaped boulder with natural and fractured surface textures that may contain olive, white quartz and rust veining.
Please Note: This product has a natural concave/convex surface, some pieces may vary +/- the depth listed.
100% split-face, shades of cream, may contain little to strong rose gold veining.
100% a fieldstone boulder, irregular shapes and sizes. Coloring is medium to dark brown chocolate and coffee tones.
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
Please Note: This product has a natural concave/convex surface, some pieces may vary +/- the depth listed. It also has no manufacturing process. It is taken from the earth and palletized for immediate use.
100% Smaller Chestnut Boulders, approximately 3" to 8". Colors of medium to dark brown chocolate and coffee tones.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed. It also has no manufacturing process as it is taken from the earth and palletized for immediate use.
Tumbled Highland Brown Webwall in an antique, irregular, web-wall shape in shades of buff and tan.
100% bed-face with irregular contour and variations of brown tones of tan, auburn, and cedar.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
An approximate blend of 50% Highland Brown™ Webwall and 50% Chestnut Boulders.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
Natural boulder formation containing a wide range of textures and colors of light, rusty, dark browns. On the surface, this product may have moss and lichens. This material has a wide array of natural shapes.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
100% split-faced Wisconsin Granite Cobble stones, with colors of red, pink, gray, black, blue, burgundy, and peppered. Available in large and tight grained configuration. The colors are enhanced when split.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
Large format Wisconsin Granite Cobbles split in half facing the round face out. The colors include red, pink, gray, black, blue, burgundy and peppered. Random sizes 8 to 18+".
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
Our Wisconsin Granite Cobbles are predominantly pink, red, gray, black, blue, burgundy and peppered in both large and tight grained configuration.
Please Note: This product has a natural concave/convex surface and some pieces may vary +/- the depth listed.
100% split-face. Dark slate and dusty blue that may contain areas of olive, white quartz, and rust.
The ends are irregular, sawn and split.
This product is typically a 50/50 blend of Aqua Grantique™ 3½" and 7½" Sawn Heights. If taller jumper heights are desired usually 10% of the 11½" is blended in. The ends of these stones are naturally broken and/or sawn at an irregular angle. We can provide all square ( +/-) sawn ends- this cost is double and the pieces are then much shorter. There would be an extended lead time. The taller 11 ½" material has much irregularity on the face, it becomes very concave/convex after splitting and may exceed 5" in depth. The Aqua Grantique is a metamorphic stone and very unforgiving in production. The Aqua Grantique is a very dense stone and piece can be heavier than 15 pounds per SF in TV form, additional support may be needed. A dark mortar enriches the end result.
100% split-face Aqua Grantique Tumbled 3½" and/or 7½"(+/- ½") sawn height. Tumbling softens the sharp ends and provides an antiqued look. Dark slate and dusty blue that may contain areas of olive, white quartz and rust. The ends are irregular, sawn and split.
This product is typically blended 50/50 with Aqua Grantique™ 3½" and/or 7½" Sawn Heights material.
100% split-face of shades of buff and tan which may contain little to strong rusty or crimson veining.
This product was previously named Sandy Creek™ 3½" and/or 7½" Sawn Heights material.
An Approximate Blend of 50% Highland Brown™ & 50% Sandy Creek™
This product is typically a blend of Desert Blend™ 3½" and/or 7½" Sawn Heights material.
Glacier Bay™ sawn heights is tumbled Sandy Creek™ that may contain tumbled Highland Brown.™
This product is typically a blend of Glacier Bay™ 3½" and/or 7½" Sawn Heights material.
100% bed-face with color variations of brown tones of tan, auburn and cedar.
This product is typically a blend of Highland Brown™ 3½" and/or 7½" Sawn Heights material.
100% split face, sawn and split ends from Wisconsin granite boulders.
Full color range of red, pink, gray, black, blue, burgundy, tan, pale green and peppered in both large and tight grained configuration.
Please note: Sawn Height 3 ½" and 7 ½" (+/- ½") and 3cm and 2 ¼" (+/- ¼")
00% split-face, sawn and split ends from Wisconsin granite boulders with tumbled texture.
Full Color Range include red, pink, gray, black, blue, burgundy, tan, pale green and peppered with either large or tight grained configuration.
Please note: Sawn Height 3 ½" and 7 ½" (+/- ½") and 3cm and 2 ¼" (+/- ¼")
Standard thickness available is 2¼, but we also offer, when material is available, 3cm or 3½" thicknesses.
Available surface textures include: shot-blast, brushed, honed, and polished.
Edge profile styles available are:
1/8" eased top/bottom with tapestry (sand-blast) finish over edge, bush-hammered, square edge, brushed, honed, polished, and/or sawn-smooth.
Please Note: We cannot thermal, rock-face, or split the surface or edge of the Aqua Grantique™ material.
The maximum length of the Aqua Grantique custom pieces are 8 ft. Plan on 3-8 week+ lead time on custom sawn pieces. Our products are not gauged; there is a (+/- ¼) in the thickness.
Packaging is additional.
Thickness available 2¼"
We also offer, when material is available, 3cm (1-13/16") or 3½" thicknesses
Surface textures available are thermal, shot-blast, polished, brushed, and honed.
Edge Profiles available:
1/8" eased top/bottom with tapestry (sand-blast) finish over edge, split-faced*, hand rock-faced, bush-hammered, sawn-smooth, modified-square brushed, honed, or polish.
*The Split faced profile in 3 cm is available up to 3'-0" lengths and in the 2 1/4" or 3 1/2" up to 5'-0" lengths.
The thermal surface texture can pull a crimson-rose hue from the minerals within the stone this is unavoidable.
Our Highland Brown custom pieces are a Natural Top, Bottom and Face.
The front-rise of the stone is a natural seam face-our weathered-edge.
The sides and back are split, sawn or rock-faced, natural ends are not available.
Guillotine Split Ends Are Available up to 5'. Pieces over 5' Must Be Sawn Then Hand Rock-Faced.
All natural hearths or mantels will vary as the stone is a natural quarried stone material. A requested thickness of 3" may result in a piece of stone can vary between 2½" - 3½", the thicker the piece the more the variance a 6" thickness would vary 5-7". One end may be thinner or thicker than the other, the surface color and texture will vary. Consecutive pieces will not match each other there will be variance. The lead time may be longer as we need to locate these pieces in the quarry for fabrication into your custom piece, plan on 4-8 weeks+.
The only difference between a Sandy Creek and Highland Brown piece is the front edge. They start out as the same stone. In Sandy Creek the pieces are split or hand rock-faced, in Highland Brown the front face is natural, the ends and back are sawn or split.
There is an additional fee for packaging custom pieces.
Natural Top and Bottom, Split, or Sawn and Hand Rock-faced on ends.
Guillotine Split Ends Are Available up to 5'. Pieces over 5' Must Be Sawn Then Hand Rock-Faced.
All natural hearths or mantels will vary as the stone is a natural quarried stone material. A requested thickness of 3" may result in a piece of stone can vary between 2½" - 3½", the thicker the piece the more the variance a 6" thickness would vary 5-7". One end may be thinner or thicker than the other, the surface color and texture will vary. Consecutive pieces will not match each other there will be variance. The lead time may be longer as we need to locate these pieces in the quarry for fabrication into your custom piece, plan on 4-8 weeks+.
The only difference between a Sandy Creek and Highland Brown piece is the front edge. They start out as the same stone. In Sandy Creek the pieces are split or hand rock-faced, in Highland Brown the front face is natural, the ends and back are sawn or split.
There is an additional fee for packaging custom pieces.
At Krukowski Stone Company, our thin veneers are packaged in 3 convenient styles:
Handy Packs (5 SF Flats and 10 or 8 LF Corner) , 100 SF/LF Crates, or Full Pallets of Flats random 252 - 300+ SF pallets.
Landscape Stone
Large Chestnut fieldstone boulders, weathered edge with medium to dark brown chocolate and coffee tones.
6" to 12"+ thick, the back is machine split 18" deep (14-20"), 18" to 5' lengths
Covers 8-10 sq ft per ton
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rich coloring The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can cross-over into the Highland Brown color and vice-versa.
Weathered seam-face in variations of brown tones of light tan to cedar.
8" - 12" or 12" - 16" thick, machine split back 18" (14" to 20") deep, 18" - 5'+ lengths
Covers 8-10 sq ft per ton
The installer needs to make sure to face the Highland Brown weathered edge face out as the back (split side) is the Sandy Creek face. The only difference between a Sandy Creek and Highland Brown piece is the front edge. They start out as the same stone. In Sandy Creek the pieces are split on the front and back and in Highland Brown the front face is natural and the back is split.
Natural Top and Bottom that is 100% split-face.
Shades of buff, cream, and light tan may contain little to strong tan or crimson veining.
8" - 12" or 12" - 16" thick, machine split back 18" (14" to 20") deep, 18" - 5'+ lengths
Covers 8-10 sq ft per ton
Aqua Blue Boulders™ sawn into 7 ½" (+/- ½") thick random slabs for outcropping retaining walls.
Now in 2 sizes 12 to 30" and 30" to 60"+
This product has natural ends that follow the random contour of the boulder as well as sawn and irregular broken ends.
Random range of shapes and sizes.
Large Chestnut fieldstone boulders, weathered edge with medium to dark brown chocolate and coffee tones.
4"- 8" or 8"-16" Thick, 18" - 40" Deep, 2' - 5' Lengths
Covers 4-6 Sq Ft Per Ton
The Chestnut material is a fieldstone boulder located in the topsoil where it pulls its rick coloring from. The Chestnut was tumbled and turned with the glacier giving them a smooth exterior texture. Some of the coloring in the Chestnut can crossover into the Highland Brown™ color and vice-versa.
Limited quantities. Sizes vary greatly.
Quarry Split-Face & Seam-Face Material.
Color variations of buff, cream, brown tones, tan, auburn, and cedar.
Desert Blend is a combination of Sandy Creek and Highland Brown
Random Thickness Available:
5" - 8"
8" - 12"
10" - 16"
14" - 24"
Various Shapes & Sizes random depth 16 to 36"+, random lenghts 18" to 72"+
Covers approx. 4-6 SF per ton
Weathered seam-face in variations of brown tones of light tan to cedar.
Random slabs of stone that have a natural seam face rustic front edge. Pieces may have random broken ends.
Thicknesses available:
5"-8"
8"-12"
10"-16"
14"-24"
Various Shapes & Sizes random depth 16 to 36"+, random lenghts 18" to 72"+
Covers approx. 4-6 SF per ton
Smaller than outcropping, irregular slabs of Sandy Creek and Highland Brown.
Variations of brown tones, light tan, auburn, and cedar to dark brown.
All of our Outcropping products can be delivered loose/dumped within our shipping area on our semi trucks- 24 ton minimum order or palletized on approximately 3,500-4,500 pound pallets.
1-2 Man
3-10" Thick, Various Shapes & Sizes 12" - 48"
Covers: 10-15+ Sq. Ft. Per Ton
2-3 Man
5-14"+ Thick, Various Shapes & Sizes 12" - 48"
Covers: 8-12+ Sq. Ft. Per Ton
Apple Creek™ 8" Drywall is 100% split-face and the coloring of this product is light to significant horizontal veining consisting of buff, mauve, and crimson colorations.
2"- 4" thick
12" - 24"+ lengths
Covers 24 sq ft per ton
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Dark charcoal, slate blue color that may contain rust coloring, white quartz, or green veining.
Available in 3½" or 7½" (+/-½") sawn heights
Random split, sawn, broken, irregular ends, 10-30" lengths
Covers 14-16 sq ft per ton
Also available in tumbled finish
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Tumbled Aqua Grantique, ends are softened and are a light slate blue color that may contain rust, white quartz, or green veining.
Pieces may contain split, broken, or sawn ends.
3½" or 7½" (+/-½") sawn heights
Tumbled Texture-face, random lengths
Covers 14-16 sq ft per ton
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Weathered seam-face that may have natural or split top and bottoms.
Coloring variations are light to dark brown tones, tan, auburn, and tawny.
Thicknesses sorted are:
2-3"
3-4"
4-5"
5-6"
6-8"
machine split 8" front to back
covers 22-24 sq ft per ton
The installer needs to make sure to face the Highland Brown weathered edge face out as the back (split side) is the Sandy Creek face. The only difference between a Sandy Creek and Highland Brown piece is the front edge. They start out as the same stone. In Sandy Creek the pieces are split on the front and back and in Highland Brown the front face is natural and the back is split.
Additional depths up to 12" are available; an additional fee would apply.
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Chestnut™ 8" Drywall that has a weathered edge face and is machine split.
Coloring is medium to dark brown chocolate and coffee tones.
8" Depth
Random Lengths
3"- 6" Thick
Covers 22-24 Sq Ft Per Ton
This material is packaged on pallets that are random weights approximately 4,000 (3,500-4,500) pounds each.
We also have Chestnut™ Random Drywall Available.
Antique tumbled texture with shades of buff, tan, and variations of brown.
4-6" or 6-8" thick
covers 22-24 sq ft per ton
Glacier Bay™ is tumbled Sandy Creek™ and/or Highland Brown™
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Tumbled Klassic Granite 8" Drywall.
The tumbling process softens the ends and lightens the colors of red, black, blue, grey, pink, peppered with large and tight grained configuration.
sawn height 6" (+/- ½")
6" to 24"+ random lengths, split-face, sawn and split ends
covers 14-16 sq ft per ton
Please note: Sawn Height 3 ½" and 7 ½" (+/- ½") and 3cm and 2 ¼" (+/- ¼")
This material is packaged on pallets that are random weights approximately 4,000 (3,500-4,500) pounds each.
Bold vibrant granite colors range of red, black, blue, grey, pink, peppered with large and tight grained configuration.
sawn height 6" (+/- ½")
6" to 24"+ random lengths split-face, sawn & split ends
covers 14-16 sq ft per ton
Please note: Sawn Height 3 ½" and 7 ½" (+/- ½") and 3cm and 2 ¼" (+/- ¼")
This material is packaged on pallets that are random weights of approximately 4,000 (3,500-4,500) pounds each.
Coloring for this product is shades of buff, cream, and light tan. The Drywall pieces may contain little to strong tan or crimson veining.
Thicknesses:
2-3"
3-4"
4-5"
5-6"
6-8"
random lengths, machine split 8" front to back
Covers 22-24 sq ft per ton
Also Available in SANDY CREEK™ 6" DRYWALL (Not Shown).
2"-3" or 3"-5" thicknesses, random lengths or machine Split 6"
Covers 36 Sq. Ft. Per Ton.
Additional depths up to 12" are available; an additional fee would apply.
Aqua blue crushed stone, size ¼" fines. Aqua Path Sand covers 120-130 SF per ton, 2" lightly compacted. Covers 100 SF per ton firmly compacted. No Binder.
Please note: All of our materials are products of nature and therefore colors, sizing, and shapes will vary from stone to stone.
Chips: Aqua Blue crushed stone chips. Sizes available are: ¼" to ¾" and ¾" to 1 ½". Coverage is approximately 120-125 SF per ton when applied 2" deep.
Chips: Aqua Blue crushed stone chips. Sizes available are: ¼" to ¾" and ¾" to 1 ½". Coverage is approximately 120-125 SF per ton when applied 2" deep.
Sandstorm™ is our newest landscaping chip quarried by Krukowski Stone crushed from our Sandy Creek™ material.
This product covers 125 sf/ton when applied at a 2" depth.
Coloring is dark blue and charcoal that may contain rust, white quartz, or olive veining. This product has a shot-blast texture applied to the surface which aids in slip resistance and enhances the color.
8"- 18"+ diameters (usually long, narrow pieces)
3cm (1-3/16") thick
covers 90-95 sq ft per ton
irregular or broken contour
due to the nature of this product, some of the stepper pieces can be small narrow pieces.
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed.
Aqua Grantique™ Shot-Blast Flagstone has coloring of dark blue slate that may contain rust, white quartz, or olive veining. This product has a shot-blast texture applied to the surface which aids in slip resistance and enhances the color.
18" - 36"+ diameters
3cm (1 3/16") thick
covers 90-95 sq ft per ton
irregular or broken contour.
Due to the nature of this product, some of the flagstone pieces may be long narrow pieces.
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed.
Rare Extra-Large Slabs
Aqua Grantique™ XL, embellished with a shot-blast texture to aid in slip resistance. Usually palletized one piece per layer.
3cm thick (+/- 1/8") 24" to 60" plus
Covers 90-95 sq ft per ton, Due to the nature of this product, some of the flagstone pieces may be long narrow pieces.
Chestnut Steppers are a natural stepper; 1- 2 ½" thick, small dinner plate sizes of 8"- 12" in diameters, and covers 90-100 SF per ton
Colors of blue, green, lilac with a natural surface texture
1" - 3" thick
18" - 36"+ diameters
covers 95-105 sq per ton
This product has no manufacturing process. It is taken from the earth and palletized for immediate use.
Coloring is light buff, but may contain crimson and/or gray veining. This product has a thermal texture applied to the surface which aids in slip resistance and enhances the color. The thermal process pulls a crimson hue from the magnesium mineral in the stone.
8" - 36"+ diameters
3cm (13/16") (+/- ¼") thick
covers 100 sq ft per ton
Coloring is light buff, but may contain crimson and/or gray veining. This product has a thermal texture applied to the surface which aids in slip resistance and enhances the color. The thermal process pulls a crimson hue from the magnesium mineral in the stone.
8" - 18"+ diameters
3cm (13/16") (+/- ¼") thick
Covers 105 to 115 SF per ton
Coloring is light buff and may contain crimson and/or gray veining. This product has a thermal texture applied to the surface which aids in slip resistants and enhances the color.
24" - 48"+ Diameters
covers 105-115 sq ft per ton
Coloring is Reddish - Brown colors.
This has a slightly rough surface to aid in slip resistance.
2" - 3" thick
18" - 36"+ diameters
covers 60-70 sq ft per ton
This product has no manufacturing process. It's taken from the earth and palletized for immediate use.
Colors are Red, black, blue, grey, pink and peppered with large and tight grained configuration.
New, Summer 2023 Shot-Blast Surface Texture. This product has a shot-blast texture applied to the surface which aids in slip resistance and enhances the color.
sawn 3cm Thick (1 3/16") (+/- ¼")
12" - 36"+ diameters
broken and natural boulder contour
Colors are rich buff, tan and dark brown tones with a Pimply surface.
1" - 2" thick
8" - 18" diameters
covers 95 - 100 sq ft per ton
Coloring: Rich Buff, Tan, Dark Brown Tones. Pimply surface.
This material is packaged on pallets that are random weights
approximately 4,000 (3,500-4,500) pounds each.1" - 2" Thick, 18" - 36"+ Diameters
Covers 95 - 100 SF per Ton
Our natural bed-faced texture is yielded from the natural seams or layers of stone as they are pealed apart from the solid quarry walls. Stratified layers of hard, dense, quartz-cemented sandstone, where no two pieces are alike. Color variations of light to dark brown, natural texture and unique undulation.
Thicknesses 1"- 2" or 2" - 3"+
16"- 36"+ diameters
1" to 2" covers 80-90 sq ft per ton
2" to 3"+ covers 60-70 sq ft per ton
This product has no manufacturing process. It's taken from the earth and palletized for immediate use.
Sandy Creek Flagstone match both the Sandy Creek and Highland Brown products.
Very rare, extra-large slabs of stone. This natural bed-faced texture is yielded from the natural seams or layers of stone as they are pealed apart from the solid quarry walls. Stratified layers of hard, dense, quartz-cemented sandstone, where no two pieces are alike. Color variations of light to dark brown, natural texture and unique undulation, in shades of buff, tan and cedar brown tones.
1" to 2"+ or 2" to 3"+ thickness
24"- 60"+ diameters
1 to 2" covers approximately 65 to 75 sf & 2" to 3"+ covers 50-60 sq ft per ton
This product has no manufacturing process. It's taken from the earth and palletized for immediate use. Sandy Creek XL Flagstone match both the Sandy Creek and Highland Brown products.
Our Sandy Creek Steppers originate from the natural seams or layers of stone as they are pealed apart from the solid quarry walls. Stratified layers of hard, dense, quartz-cemented sandstone, where no two pieces are alike, natural surface texture and unique undulation, shades tan and browns. Sandy Creek Steppers match the Sandy Creek and Highland Brown products.
1" - 2" thick
8" - 18" diameters
covers 100-110 sq ft per ton
At times this product may have extended lead time.
This product has no manufacturing process. It's taken from the earth and palletized for immediate use.
Coloring: Dark charcoal, pewter, may contain rust coloring, white quartz or green veining
7 ½" (+/- ½") Sawn Thick
Shot-Blast Surface
16"-36"+ Random Depth
2'-7'+ Random Length
Natural, Sawn, & Broken Ends.
Custom sorting is not available in this material.
Coloring: Slate blue stone that may contain olive green, white quartz and rust coloring. The Aqua Grantique steps are split on the front and back and sawn on the ends. The surface is shot-blast to aid in slip resistance and to enchance the color and surface texture.
Available Thickness:
7½" (+/- ½")
Available Sizes:
18" x 36" = 6 per pallet
18" x 48" = 5 per pallet
18" x 60" = 4 per pallet
24" x 36" = 5 per pallet
24" x 48" = 4 per pallet
24" x 60" = 4 per pallet
Coloring: Light buff, may contain crimson and/or gray veining.
Available Thickness:
3cm (13/16"), 2¼" (+/- ¼") , 3½", or 7½" (+/- ½")
Surface Textures: Thermal or Shot-Blast
Edge Texture: Split, Hand Rock-Faced, Bush-Hammer or Eased & Tapestry
Please Note That Rock-Facing Takes Off ½"+
Cambrian Cream 7 ½" sawn height steps are are split on all 4 sides; with a slip resistant shot-blast surface texture. Coloring for this product is light buff/greige that may contain crimson veining.
Available Thickness:
7½" (+/- ½")
Available Sizes:
18" x 36" = 6 per pallet
18" x 48" = 5 per pallet
18" x 60" = 4 per pallet
24" x 36" = 5 per pallet
24" x 48" = 4 per pallet
24" x 60" = 4 per pallet
Coloring is medium to dark brown, chocolate and coffee tones.
Weathered Edge Face
5" - 8" Thick, 18" - 30"+ Depth, 2' - 5' Length
*Limited Quantities, no sorting
This product has no manufacturing process. It is taken from the earth and palletized for immediate use.
Coloring: Variations of brown tones - light tan, auburn, cedar to dark brown.
5" - 8" Thickness, 18" - 36" Depth, 24" - 72" Lengths
All Natural Steps Vary In Thickness, Have A Natural Top And Bottom, And Are The Natural Contour Of The Stone.
Some Pieces May Have Broken Ends.
Usually 5 Pieces Per Pallet.
May Have Extended Lead Times.
Coloring: Variations of brown tones - light tan, auburn, cedar to dark brown.
5" - 8" Thick
Natural Top And Bottom
Split On Both Ends And Back
The Face/Rise Is Weathered Or Seam Face.
Step Sizes & Qty per Pallet
3' x 18" = 10 Per Pallet
4' x 18" = 8 Per Pallet
5' x 18" = 5 Per Pallet
3' x 2' = 6 Per Pallet
4' x 2' = 6 Per Pallet
5' x 2' = 5 Per Pallet
Natural top and bottom, tan, buff rusty brown, the split face is a cream color that may contain little to strong tan or crimson veining.
6" To 8" Random thickness, there may be some variation in thickness across the stone
Natural top and bottom, split face, sides and back, some ends may be sawn
Step Size & Qty of Steps on Pallet:
3' x 18" = 10 Per Pallet
4' x 18" = 8 Per Pallet
5' x 18" = 5 Per Pallet
3' x 2' = 6 Per Pallet
4' x 2' = 6 Per Pallet
5' x 2' = 5 Per Pallet
Coloring is shades of buff, cream, and light tan that may contain little to strong tan or crimson veining.
Natural Top
Sawn Bottom To Assist In Having Consistent Thickness of 6" (+/- 1")
Sawn Ends
Rock-Faced Where Specified
Please Note: This Is The Same Product As A Highland Brown™ Sawn Step, The Only Difference Would Be That The Highland Brown™ Has A Natural Face, Sawn Ends, Back And Bottom And Rock-Faced On The Sides If Specified.
Coloring: Reds, pinks, grays, blues, burgundy, black, peppered, large and tight grained configurations.
Thickness: 6" (+/- ¼")
Sawn Thermal Top.
The Shape Is The Natural Contour Of The Boulder.
Colors Mixed On Pallet.
Sizes:
2'-3' Diameter = 5 Per Pallet
3'-4' Diameter = 4 Per Pallet
4'-5' Diameter =3 Per Pallet
Quarried Exclusively by Krukowski Stone Company!
Aqua Blue Boulders™ are an angular irregular shaped boulder with natural and fractured surface textures which may contain drill marks or drill holes. They are dark slate-blue in color that may contain olive, white quartz and rust veining. Aqua Blue Boulders™ are typically long narrow pieces, for example, a 24" to 36" boulder many only be 18" tall.
Perfect material for Asian themed gardens and water features.
Size Approximate Coverage per Ton
3" - 6" 30-35 Sq. Ft. per Ton
7" - 12" 25-30 Sq. Ft. per Ton
12" - 18" 10-12 Sq. Ft. per Ton
18" - 24" 5-8 Sq. Ft. per Ton
24" - 36" 3-5 Sq. Ft. per Ton
2' - 5' 200 lbs. per Cubic Ft.
5' - 8' 200 lbs. per Cubic Ft.
Additional fee for any custom sorting, tagging or hand selecting material in quarry
The Aqua Blue Boulders can be delivered loose, packaged in white poly-bags, heavy-duty cardboard, or wood crates, the 18-24"+ are palletized and wrapped or with wire. Packaging is an additional fee.
This product has no manufacturing process. It is taken from the earth and palletized for immediate use.
Krukowski Stone Company is know for our boulders!
Unique Boulders Hand Selected In Our Quarry for Shape and Size
We can work with you to locate a stone that is unique to our clients project.
Rustic, weathered dark blue, may contain areas of rust, white quartz or green veining.
specimen boulder with drilled water supply holes
exterior may be natural, fractured or with drill marks
1¼" drill hole from the bottom to approximately 6" from the top.
drilled 2¼" at the top for more dramatic bubble effect.
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed.
Please scroll down for more information on water features/ fountain boulders pertaining to materials other than Aqua Blue
Wisconsin Granite Cobbles have reds, pinks, grays, blues, burgundy, black peppered, large and tight grained configurations.
Packaging: Available loose, packaged in 2 ton white polybags, or packaged in heavy-duty cardboard crates.
Please Note: This product has no manufacturing process. It is taken from the earth available for immediate use.
Natural Aqua Blue Boulder™ legs, accented with an Aqua Grantique™ serpentine seat.
One leg is sawn on the top and bottom at 15 ½" featuring a natural boulder exterior. The other leg is an Aqua Blue™ feature boulder with a sawn bottom.
The boulders vary in height with a notch cut out to hold and secure the bench top.
The bench seat is a serpentine shape 3 ½" thick, the width is 18" and 5' long, features a brushed surface texture and square brushed eased edges.
All of our benches are produced when the order is placed; plan on a 6 to 8 week+ lead time.
Sandy Creek Benches 3', 4' or 5'
The Sandy Creek bench top piece features a natural surface and bottom, they are split 4-sides and vary 3"- 4" thick, they are split 18" deep and available in lengths of 3', 4', or 5'. The legs are either 16" x 12" for placement on a hard surface or 16" x 22" if buried, the split sides are 5-6" wide.
We recommend using an adhesive to bond the top to legs.
Please note: All of our materials are products of nature and therefore, colors, veining, and character will vary from stone to stone.
Highland Brown™ Seats are unique outcropping blocks that have a sawn seat and backrest. The sawn area is then finished with a honed texture. We also offer Highland Brown™ benches without a backrest; just the outcropping stone.
Coloring options are buff, tan, auburn, and medium to dark brown or medium to dark chocolate tones.
Natural Highland Brown™ outcropping legs accented with a Cambrian Cream™ serpentine seat
5' long x 20" wide x 3½" thick with a 19" seat height.
One leg is sawn on the top and bottom with a natural boulder exterior.
The other leg is a feature boulder (which will vary in height) with a sawn bottom and a notch cut to hold and secure the bench top.
There is also an option to have the bench legs the same size with a Cambrian Cream™ serpentine seat.
Dark charcoal blue/black coloring that may contain rust coloring, white quartz, or green veining.
Sawn 3½ in height
Split 4" wide (+/- 1")
Random Lengths
Covers 80-90 Lineal Ft Per Ton
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed. Aqua Grantique Tumbled Lawn Edging images currently unavailable, contact us for more information!
Antiqued, dark charcoal blue/black coloring that may contain rust coloring, white quartz, or green veining.
Sawn 3½ in height
Split 4" wide (+/- 1")
Random Lengths
Covers 80-90 Lineal Ft Per Ton
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed. Aqua Grantique Tumbled Lawn Edging images currently unavailable, contact us for more information!
Natural Top/Bottom, Split Sides and Ends
4" x 4" Random Lengths
Covers 110+ Lineal Ft. Per Ton.
Our Sandy Creek 6" or 8" drywall's can also be used as lawn edging.
Split Sides 4" wide (+/-½")
3 ½" Sawn height
Random lengths
Covers 120+ LF per ton
Please Note: 6" or 8" drywall can be used as lawn edging as well.
Coloring: Dark Slate Blue-Green, Pewter With Areas Of Olive Green, White Quartz, And Rust Colorations.
2¼" thick
Sizes Available: (all have +/- ¼")
4" x 8"
8" x 8"
8" x 12"
Shot-Blast Surface Texture and Sawn 4-sides
Available Sizes:
4" x 8"
8" x 8"
8" x 12"
Sawn sides, split top and bottom 3" +/- 1", then tumbled
Plan for an extended lead time
Cambrian Cream™ Tumbled Pavers are light buff/beige coloring that may contain crimson and gray veining.
Sawn 3 ½" thick
Split 5" x 10"
These pavers are shot-blast or thermal and can be custom cut to size.
Standard Sizes 4" x 8," 8" x 8," & 8" x 12" are available.
Thickness is 2 1/4" (+/-)
Antiqued tumbled texture, shades of buff, tan variations of brown.
Spilt 8" x 8" (+/- 1/2") Square,
2"- 3" Thick
Tumbled Texture
Cambrian Cream™ Thermal is sawn at 2 ¼“ height and Sandy Creek™ is sawn at 2"- 3" height. This flooring is a blend of Cambrian Cream™ Thermal and Sandy Creek™ Patterned Flagstone.
Our Cambrian Cream™ and Aqua Grantique™ pool coping materials are desired for their durability and longevity, they are not affected by salt nor do they spall or delaminate. Cambrian Cream™ 2 ¼“ thick available in a thermal or shot-blast texture to aid in slip resistance. Aqua Grantique™ is available in the shot-blast surface texture. Edge options include eased top and bottom with tapestry (sand-blast) finish, bull-nosed options also.
The edges cannot be thermal or shot-blast. Our pool coping is also available in a 3cm height option.
Medium to dark brown, chocolate, and coffee tones.
Weathered edge
3"- 8" Thick
8"- 24" and irregular diameter
covers 15-17 Sq Ft per ton
Weathered Edge Face
Coloring: Medium to dark brown, chocolate, and coffee tones
3"- 8" Thick, 8"- 24" + Irregular Diameter
Covers 15-17 Sq Ft Per Ton
This product has no manufacturing process. It is taken from the earth and palletized for immediate use.
This material is packaged on pallets that are random weights approximately 4,000 (3,500-4,500) pounds each.
Aqua Grantique™ Shot-Blast Patterned Flooring is blue/gray with areas of white quartz or green veining.
Sawn 3cm (+/- ¼") thick
Available in sizes:
8" x 8"
8" x 16"
16" x16"
16" x 24"
24" x 24"
Please plan on extended lead times for larger pieces.
This material is also available in 3cm thick Aqua Grantique™ is available in irregular shapes, shot-blast flagstone 18-36"+ diameter, Steppers 8-18" diameter and cutoffs 8-24"+
Disclaimer: The Aqua Blue™ and Aqua Grantique™ materials contain minerals that on rare occasion may bleed.
Cambrian Cream™ Shot-Blast Patterned Flooring can be used for indoor and outdoor use. It is made 1 ¼" thick. Shot-Blast texture is made by by propelling thousands of small stainless steel shots into the stone. From this process, shot-blast provides a slip-resistant surface.
The coloring of this product is light buff that may contain crimson and/or gray veining.
Sawn 3cm (+/- ¼") thick
Available in sizes: 6" x 6" to 24" x 36"+ (Please plan on extended lead times for larger pieces)
Cambrian Cream™ patterned flooring is finished with a special impregnating stone sealer to protect the surface of the stone.
Please Note: Thermaling the surface enhances the color and tends to bring out the pink/apricot coloring.
3cm Thick Cambrian Cream™ also available in: Irregular Shapes, Thermal Flagstone 18-36"+ Diameters, Steppers 8-18" Diameters, Cutoffs 8-24"+
Color variations of light buff, tan to medium brown
Natural bed-faced surface texture, stone thickness can vary from one end to the other
Sizes available 12" x 12" to 24" x 48"+ Call for sizes available when planning your project.
Please be aware that this item does vary in thickness from 1½"- 3"+ and may have natural or sawn bottoms
Plan on extended lead times for larger pieces
Miscellaneous sizes, no grading available, size range is quite large, based on what is available in yard at time of your order.
sawn bottom, rounded natural end
random sizes
Miscellaneous sizes, no grading available, size range is quite large, based on what is available in yard at time of your order.
Reds, pinks, grays, blues, burgundy, black, peppered, large and tight grained configurations are available.
sawn bottom, rounded natural end
random sizes
Natural shaped stone slabs for signs in varying thickness and sizes.
Natural Shape, Natural Surface Texture
Custom Lettering Sand-Blast into the Stone
Please contact us for pricing. Lead time is lengthy. Provide as much detail when requesting pricing on a sign, font style and height, size of stone preferred -we need to know the length, width and height. Provide a pdf of any graphics needed. Signs typically are priced between $500 and $10,000+ depending on the details required.
Custom Cut Stone
Surface textures available for our Aqua Grantique™ Custom Cut Stone are Brushed, Honed, Polished, and Shot-Blast. Visit our Textures page for more details.
Edge Profile Options are Bush-Hammered, Sawn-Smooth, or Eased and Tapestry
Heights offered: 3cm, 2 ¼“, 3 1/2" or 7 1/2"
Because of the natural seams and fissures on our Aqua Grantique™ material, we no longer thermal the surface.
We cannot rock-face the Aqua Grantique™ material-as it fractures erratically.
We are very fortunate to quarry several unique materials that can take on various finishes – Brushed, Honed, Polished, Shot-Blast, and Thermal textures. Our saw shop features our Aqua Grantique™ and Cambrian Cream™ materials.
The following pages show our custom-cut stone materials along with several completed projects. Please note that this section shows a small portion of detailed products which we are capable of producing. Your imagination may be our only limitation!
We are continually expanding our state-of-the-art sawing facility that fabricates some products you will only find at Krukowski Stone Company Inc.
We continually strive to invent new products with the natural materials we possess.
Surface textures available for our Cambrian Cream™ custom cut stone are Brushed, Honed, Polished, Shot-Blast, and Thermal. Visit our Textures page for more details.
Heights offered: 3cm, 2 ¼“, 3 1/2" or 7 1/2"
Cladding Panels
Dark blue/black color with areas of olive, white quartz, and rust coloring.
Standard Thicknesses Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Dark slate blue with areas of olive, white quartz, and rust coloring.
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Aqua Grantique™ is available in thicknesses 3cm, 2 ¼", 3 ½", & 7 ½".
We offer surface textures of Brushed, Honed, Polished, and Shot-blast.
Aqua Grantique™ material weights 190 pounds per cubic foot.
Disclaimer: This material contains minerals that on rare occasions might bleed.
Cambrian Cream™ Thermal Cladding Panels are our most popular Cladding Panel option!
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Cambrian Cream™ Sawn Smooth is a smooth texture durable for architectural material.
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
Standard Thickness Available:
3cm (1 3/16"), 2 ¼" (+/-1/8"), 3 ½" (+/- ¼")
We produce our Cambrian Cream™ in a huge array of products from residential hearths to significant commercial construction projects that take years to produce.
Our natural bed-face texture is yielded from the stratified layers of hard, dense, quartz-cemented sandstone. The natural seams or layers of stone are pealed apart from the solid quarry walls where no two pieces are alike. Color variations of light tans and browns, natural texture with unique undulation.
Textures
Aqua Grantique™ Stone Finishes range from a Brushed Texture, Honed Texture, Polished Texture, and Shot-Blast Texture. Aqua Grantique™ is a dark blue to black color that main contain olive, white quartz, or rust colored veining.
Cambrian Cream™ Stone finishes have a total of five different textures. We offer a Brushed Texture, Honed Texture, Polished Texture, Shot-Blasted Texture, and a Thermal Texture. Our Cambrian Cream™ Stone is a light buff, tan color that contains areas of light to significant rust-colored or gray movement. The magnesium mineral in the Cambrian Cream™ turns a crimson hue when the Thermal Texture is applied. In the Thermal and Shot-blast finish, where the stone may be less dense, areas of the stone surface will be removed at irregular unevenness. In the Polished, Brushed, and Honed texture, the stone crystals may be removed during the process leaving pits. This is all part of the natural beauty of our Cambrian Cream™ material.
Commercial Projects
This project is done in our Aqua Grantique™ 3 ½" Sawn Heights natural stone veneer.
This project is done in our Aqua Grantique™ 3 ½," 7 ½," & 11 ½" Sawn Heights natural stone veneer.
This project is done with our Aqua Grantique™ Sawn 6-Sides 3½" & 7 ½" natural stone veneer.
This project is done with our Tuskan™ natural stone veneer.
This project is done with our Cambrian Cream™ Cladding Panels, as well as, our Sandy Creek™ 8” Drywall.
This project is done with our Sandy Creek™ natural stone veneer, as well as, Sandy Creek™ Jumpers.
This project is done in our Apple Creek™ natural stone veneer and Cambrian Cream™ Cladding Panels
This project is done in Cambrian Cream™ Honed Cladding, as well as, Highland Brown™ Custom Cladding Panels.
This project is done in our Apple Creek™ natural stone veneer.
This project is done with our Aqua Grantique™ 3cm and 2 ¼” Ledgerock.
This project is done in our Aqua Grantique™ 3 cm, 2 ¼“, & 3 ½” Sawn 6-Sides.
This project is done with our Sandy Creek™ natural stone veneer.
This project is done with our Cambrian Cream™ Cladding Panels.
This project is a custom blend of Sandy Creek,™ Highland Brown,™ Apple Creek,™ and Chestnut,™ as well as, custom Cambrian Cream™ 7½" Cladding.
This project is done with Autumn Sunburst™ Palace Blend in heights of 6”-8”-12”-18."
This project is done with a custom blend of Sandy Creek,™ Highland Brown,™ & Apple Creek™ natural stone veneer.
This project is done with our Highland Brown™ Random Ashlar.
This project is done with our Aqua Grantique™ 3 ½” Sawn Heights; however, the mason laid the natural stone veneer vertically.
This project is done with our Aqua Grantique™ 3½” and 7½” Sawn Heights.
This project was done with Cambrian Blend Ashlar™ natural stone veneer.
This project is done with Highland Brown™ natural stone veneer, as well as, custom Desert Blend™ benches.
This project is done in our Highland Brown™ natural stone veneer and our Highland Brown™ outcropping.
This project was done in our Highland™ Brown natural stone veneer.
This project was done in our Desert Blend™ natural stone veneer.
This project was done in our Highland Brown™ natural stone veneer.