MAPEI products play an important role in flooring installations, including products for surface preparation, waterproofing, sound reduction and crack isolation - plus mortars, grouts and adhesives - for all types of floor coverings. MAPEI also produces a wide variety of concrete restoration systems for construction. 

Our Tile and Stone Installation Systems are the most technologically advanced and highest performing in the Industry. MAPEI offers a variety of mortars, mastics, and grouts, as well as finishing care products that add a crowning touch to any job. Click Here for Tile & Stone Installation SystemsClick Here for UltraCare Stone, Tile & Grout Care Solutions 

Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMU); and masonry surfaces.

ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in a dispersion. It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond substrates, plus it improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates. Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application.

2-1/2 to 1 is a grouting compound for interior or exterior floors of terra-cotta tile, such as Brazilian and Spanish tile, where grout joints range from 3/8" to 3/4" (10 to 19 mm).

Keracolor S is a premium-grade, preblended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Keracolor U is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1,5 to 3 mm).

Ultracolor Plus with DropEffect™ technology is an ultra premium, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 1" (1,5 mm to 2,5 cm). DropEffect technology reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus is specially formulated with MAPEI's High-Hydrated Cement Technology (HCT') to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence.

Mapesonic 2 is a patent-pending, next-generation, flexible thin, 76-mil (1,93-mm) lightweight, load-bearing, fabric-reinforced "peel-and-stick" sound-reduction and crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with recommended MAPEI polymer-modified cement-based mortar, or glue-down wood flooring can be immediately installed with any MAPEI urethane or hybrid-polymer-based wood adhesive. Mapesonic 2 reduces transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" (10 mm) wide) from transmitting through grout, ceramic tile or natural-stone assemblies.

Mapeguard 2 is a next-generation, flexible thin, 40-mil lightweight, load-bearing, fabric-reinforced "peel-and-stick" crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with any polymer-modified cement-based mortar. Glue-down wood flooring can also be installed with any MAPEI urethane adhesive.

MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for use under MAPEI's peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer greatly increases the bond of MAPEI's peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

Mapelastic CI is a premixed, liquid-rubber, quick-drying crack-isolation membrane for installation under ceramic tile or stone in residential and commercial interior and exterior environments. Mapelastic CI meets ANSI A118.12 requirements, provides up to 1/8" (3 mm) of in-plane crack isolation, and dries after about 30 to 50 minutes. It is then ready to receive most MAPEI polymer-modified or epoxy mortars.

Keralastic is a premium-grade, high-performance, second-generation "flexible" acrylic latex additive used in the Kerabond/Keralastic™ System. This highly recommended additive enhances bond strength, flexural strength, elongation and freeze/thaw durability. To ensure proper flexibility, always use a latex additive when using a dry-set mortar for applications over plywood and for setting nonvitreous, semivitreous, vitreous and impervious tiles.

Keraply™ is a professional-grade, acrylic latex admixture used to enhance the performance of Keraset , Adesilex™ P10 and Keraflor™ dry-set mortars. This highly recommended admixture enhances bond strength, flexural strength, elongation and freeze/thaw durability. To ensure proper flexibility, always use a latex additive when using a dry-set mortar for applications over plywood and for setting nonvitreous tiles.

Floor & Wall Tile Mortar is a regular-setting, dry-set (non-polymer-enriched or "unmodified") mortar for installing tile on floors and walls in thin-set applications.

Floor Tile Mortar is a dry-set (non-polymer-enriched or "unmodified") mortar for installing floor tile in thin-set applications.

Kerabond is a premium-grade dry-set mortar for use in most interior, exterior, residential and light commercial floor and wall applications. This premium dry-set mortar is part of the Kerabond/Keralastic' high-performance mortar system.

Keraset is a dry-set mortar for use in interior/exterior residential and light commercial floor and wall applications.

Kerapoxy IEG CQ is a water-cleanable, 100%-solids epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation.

Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength epoxy mortar and chemical-resistant nonsagging grout. Available in all MAPEI colors for grouting, Kerapoxy is excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance.

Kerapoxy CQ is an improved two-component, 100%-solids epoxy grout and mortar. Nonsagging/nonslumping in joints up to 3/8" (10 mm), water-cleanable and easy to apply, Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock' technology to help protect against mold and mildew. Kerapoxy CQ is efflorescence-free and has excellent resistance to chemicals, staining, alkalinity, chlorine, bacteria, cracking and color deterioration. Because Kerapoxy CQ is impervious, this ensures that spills stay at the surface level for easier maintenance.

Granirapid is the next generation of high-performance, flexible mortar systems. As the industry's first and only fast-curing system geared for fast-track projects, it develops high, early mechanical strength and can be specified for the same demanding applications as Keralastic'. However, Granirapid will cure considerable faster because of its superior drying-out characteristics, which produce low residual moisture behind the tile after 24 hours, and does not contribute to efflorescence. When installed in conjunction with Ultracolor® Plus grout, Granirapid will allow water submersion in a revolutionary 72 hours.

Kerabond/Keralastic System is a high-performance, two-part system: Keralastic ', a second-generation "flexible" acrylic latex additive, is used to enhance the performance of Kerabond ', which is a premium-grade dry-set mortar. This system has exceptional bond strength, flexural strength, elongation and freeze/thaw durability. To ensure proper flexibility, always use a latex additive when applying a dry-set mortar over plywood or to set nonvitreous tiles.

Large Floor Tile Mortar is a regular-setting, polymer-enriched ("modified") mortar ideal for installing large-format tile on floors. This medium-bed mortar is designed to bond and support large tile over a diverse range of floor substrates.

Ultracontact is an ultra premium, normal-setting, polymer-modified, high-performance full-contact mortar. Ultracontact meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

Ultracontact RS is an ultra premium, rapid-setting, polymer-modified, high-performance full-contact mortar. It uses MAPEI's High-Hydrated Cement Technology (HCT™).

Keracrete is a specially formulated latex additive for use in job-site-prepared setting beds (1 part sand to 1 part cement), resulting in a highly water- and frost-resistant mortar. Keracrete can be used in interior and exterior applications over structurally sound concrete, masonry block, gypsum wallboard and cement board to set marble, granite, pavers, quarry tiles, and vitreous and nonvitreous ceramic tiles.

Ultralite Mortar is a premium-grade, lightweight, single-component thin-set mortar that can also be used for medium-bed and non-sag applications. This high-performance, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application, and with BioBlock™ technology for mold and mildew resistance. Ultralite Mortar 's unique Ultralite Technology' provides twice the coverage of a standard thin-set mortar and contributes to LEED points with over 20% recycled content.routs.

KerTM 909 is a ready-to-use, nonflammable, high-viscosity, synthetic polymer emulsion-based adhesive.

Type 1 is a professional-grade, traditional, nonflammable, organic adhesive for setting impervious, vitreous, semivitreous and nonvitreous tile over gypsum drywall (walls only), cement board, exterior-grade plywood, concrete and masonry block. This adhesive is used for interior applications only. Type 1 meets or exceeds ANSI A136.1, Type 1 requirements.

Grout Maximizer is a premium latex-based additive for mixing with Keracolor™ S Portland-cement-based grout to increase resistance to water and oil-based stains.

UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymermodified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

Keracaulk S is a premium-grade, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match the color and texture of MAPEI sanded grouts.

Keracaulk U is a premium-grade, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match the color and texture of MAPEI unsanded grouts.

Planiseal Easy is a proprietary MAPEI acrylic polymer specifically designed to treat concrete slabs (at least 14 days old) that exhibit moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m 2 ) per 24 hours (ASTM F1869) or up to 90% relative humidity (ASTM F 2170) and reduces transmission rates to 3 lbs. (1,36 kg) or less. Tinted green, Planiseal Easy is easy to apply with a 1/4" (6 mm) nap roller. This FastTrack Ready™ product dries quickly, allowing for floor-covering installations within 2 to 3 hours.

4 to 1 is a preblended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before the installation of tile and stone.

Mapecem is a high-performance, shrinkage-compensated binder that is added to select aggregates with water to create a fast-curing, high-strength interior repair mortar and topping. Aggregate must be added to this product before placement. See the Mapecem Technical Data Sheet for aggregate mixing ratios and application thickness.

Mapecem ® Premix is a fast-setting, premixed cement-based mortar for concrete repairs and subfloor preparation work. Mixed exclusively with water, Mapecem Premix provides an easy-to-use, high-compressive-strength, fast-setting mortar that sets completely within 24 hours without shrinkage cracks. When properly used, Mapecem Premix will allow installation of ceramic tile and natural-stone flooring after only 3 to 4 hours and installation of floor covering (such as vinyl, wood, rubber, linoleum and carpet) after 16 to 18 hours.

Mapelath is a lightweight, noncorroding and alkali-resistant lath used to replace wire lath and traditional underlayments that are heavier, thicker and more labor-intensive to install. Mapelath minimizes the overall finished height of the floor.

Topcem Premix is a ready-to-use mortar requiring only the addition of water. Topcem Premix is suitable in both bonded and unbonded, interior and exterior applications. Topcem Premix has an accelerated cure, allowing for installation of ceramic flooring in 24 hours after placement, and nonbreathable flooring systems in 48 hours. Topcem Premix can easily be screeded or sloped, and has the workability and working time of conventional mortars with a much faster curing time. It is ideal for filling trenches, re-sloping balconies, or forming screeds that may or may not receive subsequent flooring installations.

Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks and concrete pads. Mapecem Quickpatch features extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray Mapecem Quickpatch can be applied from featheredge to 3" (7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete surfaces to a uniform, superior wearing and better-than-new appearance. When used for horizontal substrate repair before application of self-leveling underlayments, Mapecem Quickpatch sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

Planipatch Plus™ is an acrylic latex additive for use with Planipatch.

Planipatch is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. Use for smoothing, patching and filling cracks, holes, voids and depressions in concrete and approved wood underlayments prior to the installation of floor coverings. Floor coverings can be installed just 1 hour after application. Mix with Planipatch Plus' to use as an embossing leveler or patch over properly prepared vinyl sheet goods, vinyl composition tile (VCT), cement terrazzo and residual cutback adhesive surfaces.

Adesilex™ P10 is a premium-grade, bright white, multipurpose thin-set mortar formulated with nonsag properties. Adesilex P10 is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.

Adesilex™ P10 is a premium-grade, bright white, multipurpose thin-set mortar formulated with nonsag properties. Adesilex P10 is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.

Ceramic Tile Mortar is a regular-setting, polymer-enriched ("modified") mortar for installing tile and stone on floors and walls in thin-set applications.

Ker 111 is a single-component, thin-set mortar for interior and exterior installations of dimensional stone, ceramic, porcelain and quarry tile. This mortar is formulated with a unique dry polymer, resulting in good adhesion to substrates and tile.

Large Tile & Stone Mortar is a premium, regular-setting, polymer-enriched ("modified") medium-bed mortar ideal for installing large-format tile and stone on floors, walls and countertops. This mortar can also be used in thin-set applications to install smaller-format tile over a diverse range of substrates.

Mosaic & Glass Tile Mortar is regular-setting, polymer-enriched ("modified"), bright white, multipurpose mortar designed for installing sheet-mounted mosaic glass or stone tiles or individual tiles in thin-set applications.

Porcelain Tile Mortar is a regular-setting, polymer-enriched ("modified") mortar for installing a wide range of tile and stone over a diverse range of substrates in thin-set applications.

Rapid-Set Tile Mortar is a rapid-setting, polymer-enriched ("modified") mortar for installing a wide range of tile and stone over a diverse range of substrates in thin-set applications.

Ultraflex 1 is a standard-grade, single-component, polymer-modified thin-set mortar for most interior and exterior installations of tile. This mortar has an above average content of unique dry polymer, resulting in good adhesion to the substrate and tile. Ultraflex 1 can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Ultraflex 1 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Formulated with low-dust technology, Ultraflex 2 reduces dust by 90% during pouring and mixing, resulting in a cleaner environment. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements whenmixed with water.

Ultraflex 3 is a premium-grade, single-component, high-performance, polymer-modified thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in superior adhesion to the substrate and tile. In addition, it can be used for most interior/exterior residential and commercial tile applications on floors and walls. Ultraflex 3 meets or exceeds ANSI A118.4 and ANSI A118.11 when mixed with water.

Ultraflex™ Marble is a premium-grade, single-component, polymer-modified, rapid-setting mortar for moisture-sensitive marble and stone installations.

Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin-set mortar for interior and exterior installations of tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready' product, allowing grouting in 2 to 3 hours. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Ultraflex RS meets or exceeds ANSI A118.4 and ANSI A118.11 requirements for fast-setting mortars when mixed with water.

Ultraflex LFT is a premium, nonsag medium-bed and thin-set mortar for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology' for ease of application.

Ultraflex LFT Rapid is a premium, rapid-setting, nonsag medium-bed and thin-set mortar for large-format tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex LFT Rapid is FastTrack Ready™, allowing grouting in 3 to 4 hours.

Ultraflor is a medium-bed, polymer-modified mortar for interior and exterior setting of large-format tile, including heavy-ribbed-back tile, brick pavers, dimensional tile and natural-stone tile. Ultraflor is designed for use at 3/8" to 3/4" (10 to 19 mm) thickness to give better support under large-format tile.

Premixed Mortar is a premixed no-mess alternative to traditional thin-set mortars that require water and mixing. It is nonflammable and ready to use.

Natural-Stone & Marble Adhesive is a high-performance, nonflammable, acrylic latex adhesive for interior installations of marble, natural-stone, ceramic, and porcelain floor and wall tile. Its fast-grabbing, nonslip formula simplifies vertical installation of tiles.

Premium Mortar is a premixed no-mess alternative to traditional thin-set mortars that require water and mixing. It is nonflammable and ready to use.

Premixed Grout is a premixed stain-resistant grout for ceramic, porcelain and natural-stone tile in residential light-duty interior installations, such as walls, floors, countertops and showers.

Premixed Mortar is a premixed no-mess alternative to traditional thin-set mortars that require water and mixing. It is nonflammable and ready to use.

Premixed Patch & Level is a self-curing, polymer-modified, premixed patching compound that has a gray appearance.

Premixed Premium Grout is a premixed stain-resistant grout for ceramic, porcelain and natural-stone tile in residential light-duty interior installations, such as walls, floors, countertops and showers.

Premixed Thin-Set Mortar is a no-mess alternative to traditional thin-set mortars that require water and mixing. It is nonflammable and ready-mixed. Ready-to-use, no-mix thin-set mortar.

Primer E is a two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments and toppings. Primer E is the most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments or toppings subject to high stress. Primer E is highly recommended for all installations of decorative toppings (such as Ultratop ® ), which demand the highest degree of crack resistance and surface finish. Primer E low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore tenacious bond.

Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayments and topping materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment or topping materials.

Novoplan Easy Plus is an improved, high-strength, self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors. Its unique formulation allows for direct application on substrates that are clean, securely bonded and properly primed.

Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineer-approved floors.

Planitex SL 35 is a gypsum-based, self-leveling underlayment with an exceptionally smooth, hard surface for use in dry interior residential and commercial areas. Planitex SL 35 is designed for application at depths of 1/4" to 3" (6 mm to 7,5 cm) and provides an excellent substrate for floor coverings such as rubber, sheet vinyl and vinyl composition tile (VCT). Planitex SL 35 can be used to cover radiant or in-floor heating systems. Its impressive compressive and flexural strengths allow it to support light wheeled traffic and light commercial activity.

Self-Leveler is a high-strength, regular-setting, cement-based, self-leveling underlayment and repair mix for use over interior concrete, plywood or other approved floor surfaces. Self-Leveler is convenient and easy to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.

Ultraplan Easy is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling underlayment that typically requires only a clean, soundly bonded substrate before application. Typically requiring reduced surface preparation, Ultraplan Easy provides lower installation costs and fast turnaround on job sites. It features high strength and is able to withstand light foot traffic after 2 to 3 hours of installation.

Ultraplan 1 Plus is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Glass-Block Mortar is a premixed blend of Portland cement, sand and chemicals specifically designed for glass-block installation. This white mortar can be used for both setting and grouting of the block.

Kerapoxy 410 is a 100%-solids epoxy setting floor and wall mortar that is suited for areas where most chemical-resistant setting material is necessary. Kerapoxy 410 is formulated to be used as a non sag thin-set for wall applications of porcelain and monocottura tile up to 12" x 12" x 3/8" (30 cm x 30 cm x 10 mm) in format. It also has high compressive strength, which provides excellent impact strength in commercial facilities. Kerapoxy 410 is designed for setting most types of tile.

Planicrete W is tremendously flexible and excellent for installing tile over well-supported and properly prepared steel substrates (such as ship decks, elevators, steel staircases and bank vaults). It is designed for setting most types of tile, including moisture-sensitive tile and natural stone such as Rosso Levanto marble, Negro Marquina marble, and green marble and their agglomerates.

MAPEI's Fiberglass Mesh is a ready-to-use, thin, strong yet flexible alkali-resistant mesh for embedment with waterproofing and crack-isolation membranes, including MAPEI's Mapelastic, Mapelastic 315, Mapelastic HPG and Mapelastic Smart on residential and commercial floors, walls and ceilings.

Mapeband is a set of rubber-coated, polyester accessories for labor-saving installation of interior and exterior waterproofing. Sold separately, these accessories consist of a cove roll (tape), drain flashing and (available in Canada only) pre-formed inside and outside corners. Mapeband accessories are designed for use with MAPEI's Mapelastic™, Mapelastic 315 , Mapelastic HPG and Mapelastic Smart waterproofing membranes.

Mapelastic 315 is a trowel-applied, two-component, flexible, fiber-reinforced waterproofing and crack-isolation membrane. Mapelastic 315 meets ANSI A118.10 requirements for waterproofing and is IAPMO-listed as a shower-pan liner.

Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI's optional Reinforcing Fabric or Mapeband' accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

Mapelastic HPG is a next-generation, ready-to-use liquid membrane suited for concrete, masonry, cement board and engineer-approved, exterior-grade plywood. It is designed for both commercial and residential use. It can be applied to interior horizontal and vertical surfaces using a trowel or roller, and is a highly flexible acrylic-based membrane. Mapelastic HPG has excellent compatibility with cement-based bonding materials. It can accommodate minor in-plane substrate movement and also can be used as a crack-isolation membrane (when used with MAPEI™s Fiberglass Me sh ). When used with this mesh, Mapelastic HPG is IAPMO-approved and meets ANSI A118.10 standards for use as a shower-pan liner.

MAPEI's Reinforcing Fabric is a strong, absorbent polyester reinforcing fabric to use with Mapelastic 400 and for optional use with Mapelastic AquaDefense.

UltraCare Abrasive Surface Cleaner is a powerful, abrasive cleaner that is safe for use on a variety of ceramic, porcelain and natural-stone surfaces. This water-based, biodegradeable formula is nontoxic and nonflammable, containing no VOCs or acids. Cleaning does not require letting the product stand on the surface. UltraCare Abrasive Surface Cleaner penetrates deep into dense surface pores and easily removes ground-in dirt, grime, rust stains and mineral deposits. This product is formulated to remove most factory-applied waxes and floor finishes as well as light cementitious and epoxy grout residue. It is excellent for use on heavily textured and hard-to-clean surfaces. Plus, it can be used in combination with any UltraCare cleaner or problem-solver.

UltraCare Acidic Tile & Grout Cleaner is a highly concentrated acidic cleaner formulated to remove cement grout haze, mortar residue, mineral deposits, rust stains and efflorescence from tile, concrete and masonry surfaces. It is also effective for removing hard-water stains, lime deposits and soap scum. This product contains no phosphates.

UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral cleaner helps to maintain a variety of ceramic, porcelain and natural-stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum buildup and hard-water deposits.

UltraCare Everyday Stone & Grout Cleaner & Resealer is a ready-to-use, everyday spray cleaner. This product helps to boost the performance of any existing penetrating sealers while cleaning and deodorizing. Powerful enough to help dissolve grease and grime, UltraCare Everyday Stone & Grout Cleaner & Resealer is ideal for kitchen and bathroom countertops. Non-acidic, it is safe to use on natural stone, grout and tile.

UltraCare Everyday Stone Clean & Polish is a ready-to-use everyday spray cleaner and polish. This product will clean and help to enhance the appearance and beauty of natural stone all in one step. Ideal for kitchen and bathroom countertops, UltraCare Everyday Stone Clean & Polish is safe to use on natural stone

UltraCare Everyday Stone, Tile & Grout Cleaner is a high-performance, ready-to-use, everyday spray cleaner. This product helps to clean and deodorize kitchens and bathroom with a fresh lemon smell. Powerful enough to help dissolve grease and grime, UltraCare Everyday Stone, Tile & Grout Cleaner is ideal for kitchen and bathroom countertops. Non-acidic, it is safe to use on natural stone, grout and tile.

UltraCare Grout Refresh Pre-Cleaner is a ready-to-use cleaner specially formulated to prepare grout joints before application of MAPEI's UltraCare Grout Refresh. UltraCare Grout Refresh Pre-Cleaner will remove grease, dirt, soil, soap scum and hard water deposits from grout joints to ensure a superior bond for UltraCare Grout Refresh. This product should not be used on epoxy grout joints.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

UltraCare Cement Grout Haze Remover is a professional-strength formulation that helps to remove cement grout haze from tile, concrete and stone surfaces. It is an acidic, low-odor, non-flammable, easy-to-use, water-based formula.

UltraCare Deep Stain Remover for Stone helps to absorb food, grease and oil stains out of natural-stone surfaces including granite, marble, limestone, slate, travertine, terra cotta, flagstone, concrete and cementitious grout.

UltraCare Efflorescence Remover is a professional-strength, acid-based formulation that effectively removes efflorescence from ceramic and porcelain tile, concrete, brick and stone surfaces as well as cement grout.

UltraCare Epoxy Grout Haze Remover is a professional-strength formulation that helps to remove epoxy grout haze from tile, concrete and stone surfaces. UltraCare Epoxy Grout Haze Remover is water-based, has a natural citrus scent, is nonflammable and is easy to use.

UltraCare Heavy-Duty Sealer & Coating Stripper is a professional-strength formulation that helps to remove tough coatings, lacquers, varnishes, sealers, paints and epoxy grout haze from surfaces. This product effectively dissolves heavy wax, and helps to remove deep-set stains and heavy grease buildup. UltraCare Heavy-Duty Sealer & Coating Stripper is water-based, pleasantly scented, nonflammable and easy to use.

UltraCare Penetrating Plus SB Stone & Porcelain Tile Sealer is a premium, natural-look, solvent-based penetrating sealer that uses VOC-exempt materials and will provide maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cement grout. The product can also be used as a pre-grouting sealer.

UltraCare Enhancing Plus Stone Sealer is a premium, color-enhancing penetrating sealer that enhances the natural colors of stone and provides maximum protection against most common stains. It is safe for use on all interior and exterior naturalstone surfaces, such as marble, limestone, sandstone, slate, granite, travertine and cementitious grout. The product can also be used as a pre-grouting sealer.

UltraCare Grout Sealer is an affordable, water-based penetrating sealer that will provide protection against most common stains for sanded and non-sanded cementitious grout joints. It can also be used as a pre-grouting sealer.

UltraCare Enhancing Stone Sealer is an economical, color-enhancing penetrating sealer that enhances the natural colors of stone and provides protection against most common stains. It is safe for use on all interior and exterior natural-stone surfaces such as marble, limestone, sandstone, slate, granite, travertine and cementitious grout. The product can also be used as a pre-grouting sealer.

UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.

UltraCare Penetrating Stone, Tile & Grout Sealer is an economical, natural-look, water-based penetrating sealer that protects against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and cement grout. The product contains no silicones and can also be used as a pre-grouting sealer.

Primer CE is an ultra low-viscosity, two-component, 100%-solids surface-consolidating epoxy primer. Primer CE effectively penetrates and consolidates the surface of weak concrete or gypsum substrates. Applied in a single- coat application, Primer CE is designed to restore structural integrity to friable substrates such as weak gypsum-based underlayments or lightweight concretes before the application of underlayments, toppings or floor finishes. Once installed, Primer CE is compatible with a wide number of primers and adhesives typically used with flooring installations, such as with tile, vinyl composition tile (VCT), carpet, sheet vinyl, wood and other floor finishing products.

Primer E is a two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments and toppings. Primer E is the most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments or toppings subject to high stress. Primer E is highly recommended for all installations of decorative toppings (such as Ultratop ), which demand the highest degree of crack resistance and surface finish. Primer E low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore tenacious bond.

Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayments and topping materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment or topping materials.

Primer T is a low-VOC, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT) and adhesive residue, as well as profiled, absorbent surfaces. Suitable for a wide variety of substrates, Primer T combines excellent versatility with an easy, low-odor application.

Primer WE (formerly Ultraprime WE) is a two-component, polymer-modified, solvent-free water-based epoxy primer for enhanced adhesion to nonporous substrates prior to the application of MAPEI self-leveling materials. When mixed, Primer WE is purple for easy identification. It improves adhesion over smooth, nonabsorbent and difficult-to-bond-to substrates such as properly prepared ceramic tile, cement-based terrazzo, old cutback adhesive residue and approved plywood subfloors.

Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineer-approved floors.

Novoplan Easy Plus is an improved, high-strength, self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors. Its unique formulation allows for direct application on substrates that are clean, securely bonded and properly primed.

Planitex SL 35 is a gypsum-based, self-leveling underlayment with an exceptionally smooth, hard surface for use in dry interior residential and commercial areas. Planitex SL 35 is designed for application at depths of 1/4" to 3" (6 mm to 7,5 cm) and provides an excellent substrate for floor coverings such as rubber, sheet vinyl and vinyl composition tile (VCT). Planitex SL 35 can be used to cover radiant or in-floor heating systems. Its impressive compressive and flexural strengths allow it to support light wheeled traffic and light commercial activity.

Self-Leveler is a high-strength, regular-setting, cement-based, self-leveling underlayment and repair mix for use over interior concrete, plywood or other approved floor surfaces. Self-Leveler is convenient and easy to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.

Ultraplan Easy is an HCT' (High-Hydrated Cement Technology)-based, quick-setting, self-leveling underlayment that typically requires only a clean, soundly bonded substrate before application. Typically requiring reduced surface preparation, Ultraplan Easy provides lower installation costs and fast turnaround on job sites. It features high strength and is able to withstand light foot traffic after 2 to 3 hours of installation.

Ultraplan 1 Plus is an HCT' (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Ultraplan M20 Plus is an HCT™ (High-Hydrated Cement Technology) calcium-aluminate-based, quick-setting self-leveling, self-drying material. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations experienced in softer underlayments. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

MAPEI's advanced Concrete Restoration Systems include underlayments, toppings, primers, epoxies, concrete repair mortars, additives, waterproofing, grouts, accessories and more! Click Here to Download Concrete Restoration Catalog 

Mapecure SRA is a liquid admixture that reacts chemically to reduce hydraulic shrinkage and the formation of microcracks. Mapecure SRA is compatible with traditional MAPEI concrete restoration materials, such as cementitious grouts and repair mortars.

Planicrete AC is a one-component, concentrated liquid latex admixture used to enhance the performance of cementitious repair mortars, plasters, stuccos, concrete mixes and toppings for the restoration of horizontal, vertical and overhead concrete; concrete masonry units (CMUs); and masonry surfaces.

Planicrete UA is a next-generation, water-based, one-component, concentrated liquid latex admixture used to enhance the performance of several MAPEI products, including mortar mixes. Using Planicrete UA as part of the designated design mixes will increase product performance in the areas of bond, flexural and tensile strengths in addition to increased durability and enhanced workability.

Elastocolor Coat is a water-based, high-build, 100%-acrylic coating designed to protect and decorate above-grade, exterior/interior vertical concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems. Elastocolor Coat is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility

Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Elastocolor Paint is a high-quality, water-based, 100%-acrylic coating that forms a protective film for use on above-grade, exterior/interior concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems. Elastocolor Paint is available in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Elastocolor Primer WB is a water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.

Mapecrete Protector FF is a film-forming, high-gloss protective coating designed to increase the stain resistance of interior concrete floors. Mapecrete Protector FF is ideal for polished or decorative concrete and cement terrazzo floors, and helps to protect against accidental spills of water and other staining materials (such as food products and household cleaners). Mapecrete Protector FF also increases the reflectivity (or gloss) of polished concrete floors.

Mapefinish Wet Look is a one-part, water-based, transparent, high-gloss sealer designed for protecting concrete surfaces - from highly textured stamped concrete to smooth self-leveling toppings. Mapefinish Wet Look utilizes a self-cross-linking acrylic resin that offers superior abrasion, blush resistance and slip resistance, outperforming most solvent-based acrylics and many urethane dispersions. Mapefinish Wet Look is low in VOCs, low-odor, non-yellowing and permeable to water vapor, making it perfect for application on both interior and exterior concrete surfaces. With its superior performance combined with user-friendly application, Mapefinish Wet Look is an ideal sealer for concrete and masonry.

Mapefloor Finish 415 NA is a two-component, solvent-free, aromatic polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces, where the Mapefloor parking deck system is utilized. Mapefloor Finish 415 NA, in combination with the proper Mapefloor parking deck system, protects concrete substrates from water and salt intrusion while, at the same time, providing a seamless, attractive, slip-resistant wearing surface.

Mapefloor Finish 450 is a two-component, solvent-free, aliphatic polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces in areas that are exposed to direct sunlight. Mapefloor Finish 450, in combination with the proper Mapefloor parking deck system, protects concrete substrates from water and chloride penetration while, at the same time, providing a seamless, attractive, slip-resistant wearing surface.

Mapefloor PU 400 LV is a two-component, low-viscosity, polyurethane basecoat specifically designed for use as a waterproofing membrane for elevated concrete surfaces where the Mapefloor parking deck system is utilized. With its high elongation and crack-bridging properties, Mapefloor PU 400 LV is suited as a basecoat layer on concrete substrates subject to vibration.

Planiseal HG is a solvent-free, moisture-tolerant, 100%-solids, clear, highgloss, two-component epoxy sealer suitable for sealing concrete.

Planiseal LVB is a two-component, very low-viscosity epoxy sealer designed to deeply penetrate into new or worn sound concrete. Planiseal LVB seals hairline cracks and penetrates the concrete pore structure to form a subsurface barrier that effectively arrests carbonation as well as stopping the penetration of chloride ions into concrete decks. Planiseal LVB significantly improves the durability and service life of concrete decks.

Planiseal Traffic Coat is a moisture-tolerant, 100%-solids, low-modulus, two-part epoxy bonding agent and binder engineered for providing a water- and skid-resistant overlay on such surfaces as bridges, elevated slabs, parking garages and balconies. When properly placed, Planiseal Traffic Coat arrests carbonation and prevents the penetration of chloride ions into concrete decks, while providing a skid-resistant, durable and attractive finish.

Planiseal WR is a new-technology, silane/siloxane-blend, water-repellent, transparent sealer offering superior performance and VOC compliance. Planiseal WR offers fast-beading water repellency for porous concrete, brick, stone and grout. Planiseal WR is water-based, is easy to apply and provides a breathable, dirt- and stain-resistant water repellency for the protection of concrete surfaces.

Planiseal WR 100 is a clear, high-performance, 100%-silane penetrating water repellent and sealer designed to provide outstanding water repellence on concrete and masonry. It penetrates deeply, protecting new and existing substrates against moisture/chloride intrusion, the effects of freezing/thawing, and such airborne contaminants as acid rain and industrial fumes. Planiseal WR 100 is breathable, allowing interior moisture to escape without affecting its performance. Plus, the product is transparent and non-staining, and will not alter the surface appearance. Planiseal WR 100 provides long-lasting protection to horizontal and vertical surfaces.

Planiseal WR 40 is a clear, water-based, 40%-silane penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion, the effects of freezing/thawing, and such airborne contaminants as acid rain and industrial fumes. Planiseal WR 40 is breathable, allowing interior moisture to escape without affecting the product's performance. Plus, the product is transparent and non-staining, and will not alter the surface appearance. Planiseal WR 40 is VOC-compliant and provides a non-film forming, waterrepellent surface that is ideal for traffic-bearing surfaces.

Planiseal Traffic Coat FS is a 100%-solids, low-modulus, fast-setting, two-part epoxy bonding agent and binder engineered for providing a water-and skid-resistant broadcast overlay. Planiseal Traffic Coat FS is used on elevated concrete bridges and decks, as well as parking garages and plaza decks, and also may be used as an epoxy mortar for patching spalls and other voids on concrete surfaces.

Primer SN is a two-component, fillerized epoxy primer specifically designed to enhance adhesion of multi-layer flooring systems, such as MAPEI's Mapefloor' polyurethane and epoxy deck and flooring systems, as well as a primer for cement screeds and epoxy mortars. It is typically applied on concrete surfaces, such as floor slabs in institutional buildings, storage and logistical areas, parking garages, balconies and walkways. Low in VOCs and viscosity, Primer SN penetrates well for an excellent mechanical and chemical bond both with the substrate and with coatings that are subsequently applied to the primer coating.

Planitop 11 is a one-component, pre-extended, cementitious, pumpable and pourable concrete mix for full-depth structural concrete repairs in above-, below- and on-grade applications. Planitop 11 is designed for large-volume structural repairs with application thicknesses from 1" to 8" (2,5 to 20 cm) and is suitable for form-and-pour and form-and-pump applications. Planitop 11 is ideal for structural repairs on horizontal, vertical and overhead surfaces in applications such as tunnels, bridges, dams, parking garages, balcony edges and columns.

Planitop 11 SCC is a one-component, cementitious, self-consolidating, polymer-modified, concrete mix with silica fume and corrosion inhibitor for full-depth structural concrete repairs in above-, below- and on-grade applications. Planitop 11 SCC is pre-extended with coarse aggregate and specially designed for large-volume, horizontal structural repairs from 1" to 8" (2,5 to 20 cm) in thickness, and is suitable for form-and-pour and form-and-pump applications on vertical and overhead applications. Planitop 11 SCC is ideal for structural repairs in applications such as tunnels, bridges, dams, parking garages, balcony edges and columns.

Planitop 12 SR is a sulfate-resistant, one-component, shrinkage-compensated, cementitious repair mortar. Planitop 12 SR is fiber-reinforced, contains both silica fume and a corrosion inhibitor, and is intended for the repair of vertical, overhead and horizontal concrete surfaces.

Planitop 15 is a one-component, shrinkage-compensated, cementitious, fiber-reinforced, fluid mortar. Planitop 15 contains a corrosion inhibitor and silica fume, and is well-suited for form-and-pour and form-and-pump applications where high early strength and flowability are required.

Planitop 18 TG is a one-component, shrinkage-compensated, very rapid-hardening, trowel-grade, cementitious repair mortar with a corrosion inhibitor. Planitop 18 TG gains strength rapidly and is particularly suited for all horizontal concrete repairs from 1/2" to 2" (12 mm to 5 cm) thickness when applied neat and up to 8" (20 cm) when extended with aggregate. 

Planitop 18 ES is a one-component, high-early-strength, cementitious repair mortar, with a corrosion inhibitor, that has the very rapid-hardening characteristics of Planitop 18 but with an extended set and working time.

Planitop 200 is a water-repellent skimcoating mortar designed to smooth, level and finish interior/exterior concrete walls and masonry, glass and porcelain mosaics, acrylic paints and drywall panels. Planitop 200 is a special blend of special binders and admixtures, selected aggregate and powder polymers, all formulated to produce high bond strength and easy finishing. Mixed only with water, Planitop 200 is available in gray and white.

Planitop 21 is a thin-build, two-component, polymer-modified cementitious mortar.

Planitop 23 is a two-component, fast-setting, polymer-modified, thixotropic, fiber-reinforced cementitious mortar, with a corrosion inhibitor. Planitop 23 is intended for vertical and overhead repairs, and contains silica fume to provide a durable, high-strength mortar in these applications.

Planitop 25 is a two-component, shrinkage-compensated, cementitious, flowable resurfacing mortar with corrosion inhibitor. Once mixed, the mortar is easily placed onto horizontal surfaces in thicknesses of 1/4" up to 1" (6 mm to 2,5 cm) per coat. Planitop 25 contains a high concentration of synthetic polymer, which produces a dense, durable resurfacing mortar with outstanding adhesion, flexural and compressive strengths. Planitop 25 has very low permeability, offering high resistance to freeze/thaw cycles and chloride ion penetration. Formulated for demanding commercial and industrial repairs involving heavy impact and high abrasion, such as loading docks, parking garages, warehouse floors, and areas subject to extreme traffic and dynamic loads.

Planitop FD is a one-part, shrinkage-compensated, cementitious, self-compacting flowable mortar for a variety of structural repairs. Planitop FD contains a corrosion inhibitor and is suited for form-and-pour applications as well as flatwork repairs at depths from 1/2" to 4" (12 mm to 10 cm) neat. Planitop FD is pumpable and ideal for deep repairs that require ease of placement and a rapid return to service.

Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor. It is suited for all interior/exterior vertical and overhead concrete repairs, including precast/prestressed, tilt-up, post-tensioned and cast-in-place concrete. Planitop X can be applied from featheredge to 4" (10 cm) per lift. Planitop X is engineered to provide high early strength with ease of application. Planitop X dries to a light gray color, matching most concrete surfaces.

Planitop XS is an extended-working-time variation of Planitop X. Shrinkage compensated, fiber-reinforced, polymer-modified and containing a proprietary corrosion inhibitor, Planitop XS features Planitop X's outstanding workability and versatility. Ideal for a wide variety of vertical and overhead concrete repairs, Planitop XS can be applied from featheredge to 4" (10 cm) per lift. Planitop XS dries to a light gray color, blending well with most concrete surfaces.

Planitop Shotcrete is a silica-fume-enhanced, fiber-reinforced cementitious mortar designed to be machine-applied on horizontal, vertical and overhead concrete surfaces, using the dry- or wet-mix spray process. Planitop Shotcrete is a special blend of hydraulic binders, silica fume, fiber and well-graded aggregates formulated to produce less "rebound" than other shotcrete materials. Planitop Shotcrete is ideal for large structural repairs, such as tunnels, bridges, dams, parking garages, viaducts and retaining walls.

Planigrout 755 is a one-component, nonshrinking, cementitious construction grout consisting of selected fine aggregates and special additives. Planigrout 755 requires only the addition of water to produce consistencies varying from dry pack to flowable. It produces excellent compressive and flexural strengths within a few days.

Planigrout 830 SP is a three-part, 100%-solids, high-performance precision machine grout for the support of heavy equipment. Planigrout 830 SP utilizes an engineered blend of graded aggregate combined with epoxy resins that produces a grout with exceptional flow and void-filling capability. Planigrout 830 SP is chemically resistant and features an exceptionally homogenous distribution of aggregate. This makes it ideal for grouting base plates exposed to the dynamic loading and continuous vibration produced by heavy industrial equipment.

Planigrout 712 is a one-component, nonshrink, nonmetallic, cement-based DOT (Department of Transportation) grout that meets CRD C621 and ASTM C1107 standards. Planigrout 712 contains a corrosion inhibitor and silica fume, as well as a special blend of aggregate and plasticizers that provide exceptional placing and performance characteristics.

Mapefer 1K is a one-part anticorrosion and bonding mortar based on unique polymers, cementitious binders and proprietary corrosion inhibitors. Mapefer 1K is designed for application on clean reinforcing steel to inhibit oxidation and rust formation.

Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair. Composed with a zinc core, Mapeshield I has its surface area covered by a special conductive paste; once connected to steel reinforcement rods, the paste stops corrosion, impedes its formation and keeps the system active for many years. When Mapeshield I is attached to the reinforcement rods, the two dissimilar metals (zinc and steel) are connected together in a suitable electrolyte (the concrete). The metal with the most negative potential (zinc) will corrode, and the metal with the least negative potential (steel) remains protected against corrosion. The current generated by the installation of Mapeshield I starts to push the pH level higher, making the concrete more alkaline, and begins pushing chloride ions away.

Mapeshield CI 100 is a surface-applied corrosion inhibitor designed to penetrate concrete structures and protect embedded steel reinforcement. It forms a protective layer on the surface of the steel reinforcing bar to inhibit corrosion caused by carbonation, the presence of chlorides and other contaminants in the concrete (such as deposits from acid rain and industrial pollution), and helps to prevent additional cracking and spalling in the future. Mapeshield CI 100 can be applied by spray, brush or roller. By diffusing into the hardened pore structure of concrete to the steel reinforcing bars, Mapeshield CI 100 delays the corrosion process and reduces overall corrosion activity.

Planibond 3C is a three-component, cementitious, moisture-tolerant, epoxy-modified corrosion inhibitor and bonding agent. Water-based and solvent-free, it can be applied using a brush, a short-nap roller, a push broom or hopper spray equipment. Use Planibond 3C on all exposed reinforcing steel and as a bonding agent before the placement of repair products.

Mapecrete Film is designed to retard moisture evaporation on concrete surfaces and aid in finishing of concrete flatwork. Mapecrete Film forms a thin film to prevent rapid moisture loss on newly placed concrete surfaces and is particularly effective when concrete is placed in areas with direct sun, low humidity, high winds or high temperatures. Diluted with water, Mapecrete Film is sprayed on fresh concrete to aid in preventing "plastic shrinkage" and potential cracking.

Mapecure AP is a solvent-borne, acrylic polymer curing, sealing and dustproofing compound designed for curing new concrete and sealing new and hardened concrete. Mapecure AP produces a medium-gloss, clear film to protect concrete surfaces from water intrusion, dirt and abrasion. Mapecure AP is suitable for use on both interior and exterior concrete surfaces, creating a durable acrylic membrane that helps cement to fully hydrate and that maximizes the strength and durability of the concrete.

Mapecure CS is a 100%-pure acrylic polymer concrete sealer designed to protect and enhance cured concrete. Mapecure CS produces a non-yellowing, satin finish film that highlights the appearance of decorative concrete, including stamped concrete, colored concrete pavers and acid-stained concrete. Mapecure CS forms a tough, durable surface against the damaging effects of water, traffic and salt penetration while, at the same time, allowing the concrete surface to "breathe." Mapecure CS will darken the color of concrete, making the surface look rich in appearance.

Mapecure DR is a water-based, liquid, membrane-forming curing compound for freshly placed concrete. Formulated from specially selected dissipating hydrocarbon resins, it is designed to retain water in the concrete for proper hydration, and then to begin breaking down and deteriorating when exposed to traffic, sunlight and weathering. Mapecure DR provides an excellent initial cure for concrete, allowing the concrete to achieve its ultimate strength while reducing surface shrinkage cracking.

Mapecure UV is a solvent-based, ultraviolet (UV)-stabilized, styrenated acrylic copolymer sealer especially designed for curing fresh concrete. Mapecure UV contains more than 25% solids as well as special UV stabilizers to protect and enhance the appearance of concrete. Mapecure UV is suitable for use on interior and exterior concrete surfaces, creating a continuous glossy membrane that makes a concrete surface resistant to dirt and stains.

Ultratop is a self-leveling, self-drying topping based on High-Hydrated Cement Technology (HCT') that is specially formulated for fast-track resurfacing of interior horizontal wear surfaces.

Ultratop PC is a high-flow, quick-setting, self-leveling, cementitious topping optimized for polishing. Suitable for both interior and exterior use, Ultratop PC is designed to be applied at 3/8" to 2" (10 mm to 5 cm) thick and cures quickly for fast-track resurfacing and polishing of concrete floors. Ultratop PC is suitable for applications including high-end residential units, retail stores, warehouses, schools, kitchens, airport hangars and loading docks. Ultratop PC is engineered to provide a thin resurfacing material that is extremely dense, hard and durable so that it is capable of holding a brilliant polish.

Mapecrete Hard FS is a water-based, magnesium fluorosilicate solution for horizontal interior concrete surfaces that chemically bonds with the free lime in concrete to produce a denser, more durable and chemically resistant floor surface. It is particularly effective on floors that are porous, readily absorptive and only moderately hard. A special component in Mapecrete Hard FS aids in penetration and chemical reaction, allowing Mapecrete Hard FS to densify and dustproof at greater depths.

Mapecrete Hard LI is a water-based, VOC-free, lithium silicate solution used to densify, seal and dustproof horizontal interior/exterior concrete surfaces. It penetrates the concrete surface, chemically reacts with the free lime and produces a dense, hard matrix within the concrete and a more durable surface on top. Mapecrete Hard LI is especially effective on old, worn and dusting floors, as well as for improving the wearing characteristics and abrasion resistance of new concrete. Floors treated with Mapecrete Hard LI typically last longer, are easier to maintain, and will not peel or flake off.

Mapecrete Hard SB is a special blend of silicate and siliconate polymers specifically designed to penetrate new and existing interior concrete in order to densify, seal, dustproof and harden the surface. It is formulated to chemically react and create an internal bond that increases surface density, durability and abrasion resistance. Mapecrete Hard SB is a colorless, environmentally friendly chemical solution that increases the wearing strength of concrete floors subjected to pedestrian and vehicular traffic. Floors treated with Mapecrete Hard SB last longer, are easier to maintain, and keep an attractive sheen on concrete that will not peel or fade away.

Mapecrete Hard SI is a clear, water-based sodium silicate densifier used to harden and dustproof concrete surfaces. It chemically reacts with the free lime and calcium carbonate in concrete, forming a dense, insoluble and chemically resistant surface. Mapecrete Hard SI is a VOC-free, colorless and odorless chemical solution that may be applied to horizontal interior, fresh or hardened concrete. Floors treated with Mapecrete Hard SI resist the penetration of water, oil and chemicals.

Concrete Renew Fine is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It allows a variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew Fine features a natural light gray color that provides a uniform finish to concrete surfaces.

Concrete Renew is a one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It is suitable for broom finishes and decorative trowel finishes on sidewalks, driveways, steps and anywhere that has exposed concrete. Concrete Renew features a natural light gray color that provides a uniform, like-new look to concrete surfaces.

Planitop Basecoat is a high-performance, polymer-modified, Portland-cement-based pre-blended mortar for non-structural applications. Use Planitop Basecoat before the application of a finish coat of acrylic or cement-based stucco or waterproof paint. Planitop Basecoat is suitable for applications on concrete or masonry substrates, and properly prepared wood and suitable Exterior Insulation and Finish Systems (EIFS). Planitop Basecoat may also be used as an adhesive and basecoat for EPS (expanded polystyrene) architectural shapes, and as a smoothing and leveling agent over stucco and approved substrates. Planitop Basecoat conforms to appropriate sections of ASTM C926, Standard Specification for Application of Portland Cement-Based Plaster.

Planiseal MB is a 100%-solids epoxy coating that is designed to effectively stop moisture-related problems with toppings, as well as act as a surface-consolidating epoxy primer.

Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, residential driveways, sidewalks and concrete pads. Mapecem Quickpatch features ease of placement, with a variable water ratio and outstanding workability. Light gray Mapecem Quickpatch can be applied from featheredge to 3" (7,5 cm) in confined areas. Mapecem Quickpatch sets fast for easy and cost-efficient patching of horizontal substrates before application of self-leveling underlayments, thus minimizing jobsite turnaround time.

Tilt Finish is a versatile, fast-setting, polymer-modified material utilizing a proprietary blend of cements and additives. It is ideal for producing a smooth finish on concrete surfaces including tilt-wall construction, poured-in-place concrete, masonry, pre-cast beams and columns. Tilt Finish features ease of placement, with a variable water ratio and good workability. It can be applied from featheredge to 1/2" (12 mm) in confined areas. Tilt Finish is ideal for covering imperfections in concrete surfaces, providing a uniform and light gray appearance and a smooth surface before painting or application of coating.

Epojet is a two-component, 100%-solids, low-viscosity epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood. High-strength and moisture-tolerant, Epojet meets ASTM C881 requirements Types I, II and IV, and Grade 1, Class C (except for gel time); AASHTO M235 specifications; and USDA specifications for food-processing areas. Epojet may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Epojet LV is a two-component, 100%-solids, ultra low-viscosity epoxy injection resin that deeply penetrates and seals hairline, non-dynamic cracks, both dry and damp. High-strength and moisture-tolerant, Epojet LV meets ASTM C881 requirements Types I and II, and Grade 1, Class C (except for gel time); AASHTO M235 specifications; and USDA specifications for food-processing areas. Epojet LV may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Planibond AE is a high-strength, two-part, nonsag, epoxy anchoring gel designed for a wide variety of bonding and repair applications. With VOC compliance and low odor, Planibond AE meets ASTM C881 requirements Types I, II, IV and V; and Grade 3, Classes B and C; as well as USDA specifications for food-processing areas. Planibond AE is moisture-tolerant and may be extended with graded sands to use as an epoxy mortar. Planibond AE adheres to masonry, concrete, steel and wood.

Planibond EBA is a two-component, multipurpose high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%-solids and moisture-insensitive. Planibond EBA is used primarily as a bonding agent for screeds and repair mortars, with applications for anchoring and crack repair. Planibond EBA meets ASTM C881 requirements.

Planibond AE Fast is a rapid-setting, high-strength, moisture-tolerant, twocomponent, 100%-solids, epoxy anchoring gel designed for a wide variety of vertical/horizontal bonding and repair applications. Planibond AE Fast meets ASTM C881 requirements Types I, II*, IV and V; and Grade 3, Classes A, B and C; as well as USDA specifications for food-processing areas. Planibond AE Fast is ideal for anchoring bolts, dowels and reinforcing steel in concrete, as well as for sealing cracks and setting ports for injection grouting.

Mapecem 102 is a one-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar with a corrosion inhibitor and silica fume. Mapecem 102 is intended for the renovation and topping of interior/exterior horizontal concrete surfaces, such as tunnels, bridges, overpasses, factory floors, warehouse floors and loading docks; new and existing concrete slabs; and the construction of floating or monolithic toppings where fast drying is required to allow traffic within 4 hours.

Mapecem 202 is a two-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar with a corrosion inhibitor. Mapecem 202 contains silica fume and is intended for the repair and topping of interior/exterior horizontal concrete surfaces, where a durable, high-strength and low permeability concrete is required. Mapecem 202 is excellent for heavy-duty industrial applications, including manufacturing and warehouse floors, loading docks and tipping floors for smelting metals, where fast drying is required to allow pedestrian and rubberwheel traffic within 4 hours.

Topcem Premix is a ready-to-use mortar suitable for interior and exterior applications, bonded as well as unbonded. It has an accelerated set, allowing for installation of ceramic flooring in 1 day after placement, and nonbreathable flooring systems in 3 days. Topcem Premix can easily be screeded or sloped, and has the workability and working time of conventional screed mortars with a much faster setting time. It is ideal for interior or exterior repairs such as filling trenches, re-sloping balconies, and forming screeds that may or may not receive subsequent flooring installations.

Mapeflex P1  is a high-performance, one-part elastomeric polyurethane sealant and adhesive. Mapeflex P1 offers excellent adhesion to most surfaces, superior gunning and tooling, as well as excellent flexibility for moving joints.

Mapeflex P1 SL is a high-performance, one-component , self-leveling, moisture-cured, elastomeric polyurethane sealant. Mapeflex P1 SL offers superior adhesion to most surfaces, durability and excellent flexibility for moving joints. Mapeflex P1 SL meets the requirements of ASTM C920, Type S, Grade P, Class 25.

Mapeflex EMC-1 is a white, premium-grade, water-based elastomeric patching material that can be easily used for brush application to fill and seal cracks and/or static joints in masonry and stucco surfaces. Mapeflex EMC-1 is highly flexible, offers excellent filling and adhesion on prepared substrates and is designed for compatibility with MAPEI's Elastocolor® coating systems.

Planibond JF is a two-part, 100%-solids, moisture-tolerant, semi-rigid epoxy joint filler. Planibond JF meets ASTM C881 and ACI 302 requirements as well as USDA specifications for food-processing areas. The self-leveling Planibond JF is ideal for filling and sealing horizontal non-moving saw-cut control joints and random cracks.

Planiseal RapidJoint 15 is a 100%-solids, two-component, rapid-curing, polyurea elastomer joint and crack filler. Planiseal RapidJoint 15 is designed for supporting non-moving joint nosings exposed to forklift and steel-wheeled traffic. Planiseal RapidJoint 15 features broad temperature capabilities, can address joint movement of 10% to 15%, and cures quickly so that repaired joints can be re-opened to traffic almost immediately after application. Designed with enhanced application characteristics, Planiseal RapidJoint 15 is formulated for easy shaving of any excess and will typically not leave a stain on surfaces adjacent to joints.

Mapelath is a lightweight, noncorroding and alkali-resistant lath used to replace wire lath and traditional underlayments that are heavier, thicker and more labor-intensive to install. Mapelath minimizes the overall finished height of the floor.

Idrostop is is used to produce watertight construction joints in civil, industrial and hydraulic construction. Construction joints created with Idrostop are watertight up to 5 atm of pressure. Unlike materials made of alternate composition that lose efficiency in repeated wet/dry cycling, Idrostop's unique composition allows it to maintain performance even in aggressive environments.

Mapeband TPE is a professional-grade, highly durable and flexible band for sealing and waterproofing expansion joints and cracks subject to movement up to 7/32" (5,5 mm). TPE, an acronym for "elastomeric thermoplastic polyolefine," represents a group of polyolefines that combine the best properties of thermoplastic polymers and synthetic elastomer technology.

Mapelastic is a cementitious membrane that waterproofs concrete and masonry. It also offers protection against chemical attack from de-icing salts, sulphates, chlorides and carbon dioxide that leads to deterioration and costly repairs. Mapelastic is designed for applications on new concrete structures with hairline cracks, as well as any cementitious surface subject to vibrations and subsequent cracking. Use Mapelastic on such hydraulic projects as irrigation canals and faces of dams, in addition to swimming pools, water features and storage tanks. Available in silver and white, Mapelastic may also be used to waterproof balconies, suspended walkways and patios.

Mapelastic Smart is a cementitious membrane for protecting new concrete structures, concrete structures repaired with Mapecem® or Planitop® mortars, renders with hairline cracks and any cementitious surface subject to vibrations and the subsequent cracking. Mapelastic Smart also is designed for waterproofing such hydraulic projects as channels and faces of dams as well as swimming pools, basins, storage tanks, balconies and terraces.

Mapetex Sel is a macro-holed polypropylene fabric reinforcement used together with Mapelastic' and Mapelastic Smart flexible cementitious membranes for waterproofing and protecting new concrete surfaces or concrete units particularly subject to large deformations and, therefore, at risk of cracking. Mapetex Sel is also suitable for use on surfaces at risk of cracking following repair with products from the Mapecem® and Planitop® product groups. Mapetex Sel can increase crack-bridging capability up to 1/8" (3 mm).

Planiseal 88 is a one-component, polymer-modified, cementitious coating for residential waterproofing, including masonry surfaces (at a maximum depth of 10 feet or 3,05 m). Planiseal 88 is also used as a surface-preparation product for MAPEI waterproofing products.

Planiseal Plug is an ultra quick-setting mortar specially designed for stopping leaks, for repairing voids and pockets in concrete, and for anchoring. It is ideal for plugging active water leaks on horizontal and vertical concrete surfaces in interior or exterior applications.

Resfoam HL 35 is a single-component, water-activated hydrophilic polyurethane used for sealing cracks or joints in concrete structures that are subject to continuous moisture exposure. Depending on the water-to-resin ratio, Resfoam HL 35 will vary in consistency from a resilient rubber-like foam to a flexible gel. Resfoam HL 35 is capable of absorbing water up to 800% of its own mass and subsequently prevents water from penetrating into a structure. This unique feature allows Resfoam HL 35 to be used for large water-inflow applications, such as manholes or below-grade structures with active water leaks. Once cured, Resfoam HL 35 provides a watertight, elastomeric seal that stops the penetration of water through cracks or voids.

Resfoam HB 45 is a low-viscosity, flexible, hydrophobic polyurethane grout used to stop water infiltration in concrete structures. Resfoam HB 45 is a solvent-free, MDI-based polymer system that reacts with water. Use Resfoam HB 45 together with Resfoam HBA 5 accelerator to adjust the reaction profile for a specific application. In a free-rise circumstance, Resfoam HB 45 will expand up to 750% of its liquid volume. Upon application, Resfoam HB 45 reacts to form a closed-cell polyurethane grout that will not shrink, and provides an elastomeric waterproof barrier sealing infiltration points against water intrusion. Resfoam HB 45 is nontoxic and has good chemical resistance. Resfoam HB 45 is also available in a dual-cartridge format (Resfoam HB 45C) with the accelerator already portioned in the Part B cartridge.

Resfoam PF is a 100%-organic blend of selected, high-temperature oils. Resfoam PF provides an environmentally friendly and effective alternative to hazardous products as a flush and cleaning agent for removing polyurethane and other tough composites from grout-injection equipment and injection lines.

Resfoam SS 75 is a low-viscosity, hydrophobic polyurethane used for soil stabilization in a variety of water-bearing soils. The low viscosity of Resfoam SS 75 provides for effective penetration of the earth, adding structure and stabilization by encapsulating the granules and subsequently forming a rock-like mass. By application, Resfoam SS 75 cures rapidly to a rigid closed cell, effectively stopping water seepage and waterproofing the soil. Resfoam SS 75 utilizes Resfoam HBA 5 catalyst, which provides a variable reaction time.

Floor Covering Installation Systems Our Floor Covering Installation Systems provide the widest range of solvent-free, environmentally-friendly adhesives for quality installations of nearly every type of floor covering, which include, carpet, vinyl-sheet goods, wood, rubber and sport flooring, VCT/VAT, homogeneous vinyl and solid vinyl tile, cove base and more!Click Here for Floor Covering Installation Systems

Ultrabond 3085 premium carpet pad adhesive is a solvent-based adhesive for fastening all types of carpet padding permanently in place over concrete subfloors. Ultrabond 3085 tacks up quickly and has excellent bond strength to prevent slippage of carpet pad during stretch-in or subsequent use.

Ultrabond ECO 3185 latex carpet pad adhesive is a water-based adhesive for fastening carpet padding permanently in place over any flooring surface. It has good initial tack and high strength to prevent movement of padding during stretching or subsequent use. Ultrabond ECO 3185 has no solvent added and is nonflammable, making it suitable for use in enclosed environments in occupied buildings.

Ultrabond ECO 120 is designed for the mainstream installations of most broadloom carpet and felt-backed sheet flooring. Competitively priced, Ultrabond ECO 120 delivers both value and performance. Its formulation has been specifically crafted to provide ample working time for carpets with patterns as well as for the positioning of felt-backed vinyl sheet flooring.

Ultrabond ECO 185 is a longtime favorite adhesive of the commercial carpet installer. Returning to its original roots with ultra fast grab, phenomenal leg development and superb bond strength, Ultrabond ECO 185 is designed to please the fast-track carpet contractor. It can be used on virtually every carpet type and requires minimal flash time for ideal performance.

Ultrabond ECO 20 has been designed to provide both value and performance in a standard flooring adhesive. Its unique formulation provides ample working time for installing felt-backed vinyl sheet flooring. Ultrabond ECO 20 also has been designed to install most basic carpet in residential and light commercial applications. Ultrabond ECO 20 is suitable for installing carpets with ActionBac, jute, latex-foam and sponge-rubber backings. In addition, Ultrabond ECO 20 is ideally suited for flooring installations that may need removal within 2 to 3 years, such as installations in rental properties as well as main-street commercial and retail outlets.

Ultrabond ECO 220 is a premium-performance, high-solids multipurpose adhesive designed for extra-heavy commercial applications such as airports, schools, hospitals and convention centers. It also may be used for double glue-down applications and to install carpets with jute, polypropylene (ActionBac®), latex-unitary, latex-foam, sponge-rubber, hot-melt (Unibond®), needle-punched, woven, closed-cellular urethane foam and Enhancer backings.

Ultrabond ECO 285 is a FastTrack Ready' product designed specifically for the installation of carpet with hot-melt backings. Its high-solids formulation has been developed for use in the wet-lay installation method, so that no flash time is required. Its rapid tack development and superior bond strength make Ultrabond ECO 285 the adhesive of choice for virtually all carpet installations.

Ultrabond ECO 420 is a high-tack outdoor carpet adhesive with great wet grab. Ultrabond ECO 420 sets rapidly, and can be used indoors and outdoors.

Ultrabond ECO 85 has been designed for the value-conscious carpet installer. Ultrabond ECO 85 provides quick leg development and good bond strength for most carpet backing types and felt-backed vinyl sheet flooring.

Ultrabond ECO 885 has been specifically designed to provide both permanent and releasable bonds for carpet and carpet tile with non-PVC, polyolefin and most "eco-type" backings. Its unique formulation has been developed to provide a very aggressive bond to polyolefin-type carpet backings where traditional adhesives will not work. Ultrabond ECO 885 can be installed into wet for permanent bonding and allowed to dry to its tacky phase for releasable installations. Ultrabond ECO 885 also can be used in fast-track construction practices where the MVER and RH are less than 8 lbs. (3,63 kg) and 90% respectively, and show diminishing results over time.

Ultrabond ECO 810 offers a new formulation for even greater performance. Faster dry times and an enhanced, more aggressive tack make Ultrabond ECO 810 the perfect choice for fast-track vinyl-backed carpet tile installations. Ultrabond ECO 810 can be installed into wet adhesive for permanent bonding or allowed to dry to its tacky phase for releasable installations. Ultrabond ECO 810 also can be installed by spray, roller or trowel depending on installation application. In addition, its formulation is greater in moisture resistance, making Ultrabond ECO 810 part of the FastTrack Ready' family of installation products.

Planiseal Easy is a proprietary MAPEI acrylic polymer specifically designed to treat concrete slabs (at least 14 days old) that exhibit moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m 2 ) per 24 hours (ASTM F1869) or up to 90% relative humidity (ASTM F 2170) and reduces transmission rates to 3 lbs. (1,36 kg) or less. Tinted green, Planiseal Easy is easy to apply with a 1/4" (6 mm) nap roller. This FastTrack Ready™ product dries quickly, allowing for floor-covering installations within 2 to 3 hours.

Planiseal VS Fast is a fast-curing, alkali-resistant, two-component, 100%- solids epoxy coating that effectively stops moisture-related problems with floor coverings. In all cases, moisture vapor emission rates (MVERs) of up to 25 lbs. per 1,000 sq. ft. (11,3 kg per 92,9 m2) per 24 hours are reduced to below the limit of 3 lbs. per 1,000 sq. ft. (1,36 kg per 92,9 m2) required for many types of finished flooring, when the designated film thickness is applied. Applied in a single-coat application system, Planiseal VS Fast features an accelerated cure that enables priming for subsequent installation of selfleveling underlayments as fast as 4 to 5 hours after placement. Once installed, Planiseal VS Fast is compatible with a wide number of primers and adhesives typically used with flooring installations, such as tile, vinyl composition tile (VCT), carpet, sheet vinyl, wood and other floor-finishing products.

Mapelath is a lightweight, noncorroding and alkali-resistant lath used to replace wire lath and traditional underlayments that are heavier, thicker and more labor-intensive to install. Mapelath minimizes the overall finished height of the floor.

Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.

Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete floors, driveways, sidewalks and concrete pads. Mapecem Quickpatch features extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray Mapecem Quickpatch can be applied from featheredge to 3" (7,5 cm) for ramping or filling. That makes it ideal for restoring weathered, damaged concrete surfaces to a uniform, superior wearing and better-than-new appearance. When used for horizontal substrate repair before application of self-leveling underlayments, Mapecem Quickpatch sets fast for easy and cost-efficient repairs, minimizing job-site turnaround time.

Planipatch Plus is an acrylic latex additive for use with Planipatch. When Planipatch is mixed with Planipatch Plus, the Planipatch Plus System can be used as an embossing leveler or as a patch to fill voids over properly prepared vinyl sheet goods, vinyl composition tile (VCT) and cement terrazzo before the direct glue-down installation of floor coverings.

Planipatch is an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength. Use for smoothing, patching and filling cracks, holes, voids and depressions in concrete and approved wood underlayments prior to the installation of floor coverings. Floor coverings can be installed just 1 hour after application. Mix with Planipatch Plus' to use as an embossing leveler or patch over properly prepared vinyl sheet goods, vinyl composition tile (VCT), cement terrazzo and residual cutback adhesive surfaces.

Planitex UNS is a fast-setting, nonshrinking, polymer-modified, gypsum-based patching compound that is easy to apply. Planitex UNS is for repairing holes, voids and depressions in concrete, gypsum-based surfaces or wood underlayments before the installation of floor-covering materials. It also is designed for patching holes in drywall and plaster walls. Planitex UNS does not contain starch.

Ultrabond ECO 901 adhesive has been specifically formulated as a bonding agent for fiberglass reinforced plastic (FRP) panels.

Ultrabond ECO 290 premium sheet-goods adhesive is formulated with an advanced acrylic polymer technology. This adhesive offers an excellent open time that allows for the positioning of felt-backed vinyl sheet goods. Ultrabond ECO 290 is designed for commercial or residential installations and offers a lifetime nonstaining warranty. Use to install mineral fibrous felt-backed vinyl sheet goods; and carpets with jute, polypropylene (ActionBac®), latex-foam and sponge-rubber backings.

Ultrabond ECO 300 is a hard-set acrylic adhesive that locks flooring into place while offering excellent indentation resistance. Ultrabond ECO 300 develops a strong bond to limit flooring movement, offers outstanding compatibility with vinyl floorings and will not stain.

Ultrabond ECO 360 is a proprietary, high-performance, wet-lay and pressure-sensitive adhesive designed specifically for installing homogeneous and heterogeneous solid vinyl flooring. With its strong, durable, moisture-resistant and alkali-resistant bond, it is ideal for commercial and institutional applications. Ultrabond ECO 360 has an excellent open time, develops strength quickly, performs well under rolling loads and resists indentation. Its low volatile organic content makes it ideal for use in occupied buildings such as hospitals and medical centers.

Ultrabond ECO 390 (formerly Ultrabond ECO 540) is a newly formulated adhesive specifically designed for the linoleum flooring. Its high solids, strong leg development and aggressive tack make it perfect to install this stiff flooring material. The performance-driven Ultrabond ECO 390 grabs onto the linoleum backing during installation and locks it to the subfloor, reducing the need for continual rolling to ensure proper contact and bond. Easy to trowel, Ultrabond ECO 390 is low in volatile organic compounds (VOCs), making it suitable for use in occupied buildings such as hospitals and schools.

Ultrabond ECO 560 is a proprietary acrylic polymer-based adhesive with enhanced bonding characteristics specifically for rubber sheet and tile flooring. It can also be used to bond solid vinyl sheet, plank and tile; vinyl composition tile (VCT); and felt-backed vinyl sheet flooring. Ultrabond ECO 560 flashes quickly to its tacky phase and is suitable for use over porous and nonporous substrates. Its unique performance characteristics, non-hazardous components and low volatile organic content make it suitable for use when two-component urethane products cannot be recommended.

Ultrabond ECO 611 is a traditional, latex-modified asphalt emulsion adhesive specifically designed for the value-conscious installer of vinyl composition tile (VCT). Quick dry times, superb tack and easy trowelability make Ultrabond ECO 611 an excellent choice for VCT installations. Use over approved substrates including properly prepared existing cutback adhesive residue and existing VCT. Ultrabond ECO 611 also can be used directly over MAPEI's Planiseal' EMB moisture barrier when installing VCT over it, provided that the surface is smooth and flat.

Ultrabond ECO 711 has been reformulated to provide even faster dry times, enhanced grab and greater slip resistance. Now a FastTrack Ready' product, Ultrabond ECO 711 has been formulated for higher moisture resistance, making it suitable for use over fresh concrete slabs with moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m2) per 24 hours.

Ultrabond ECO 350 is a superior adhesive formulated with a MAPEI proprietary acrylic polymer. It offers the unique flexibility of installing floor coverings after a short flash time or once the adhesive exhibits pressure-sensitive characteristics. This universal adhesive has extensive compatibility characteristics with floor coverings and offers superior performance on high-end commercial installations. It will never stain vinyl flooring. Use to install solid vinyl tile; sheet goods, including mineral fibrous felt-backed vinyl; homogenous PVC; vinyl composition tile (VCT); rubber tile; and carpets with jute, polypropylene (ActionBac®), latex-unitary, sponge-rubber, hot-melt (Unibond®), needle-punched, woven, closed-cellular urethane foam and Enhancer backings.

Ultrabond ECO 575 is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base. Ultrabond ECO 575 also has been recently reformulated to offer even greater grab and wet strength, keeping corners wrapped tight. Its acrylic-based, light-colored formulation won't stain even the whitest wall base. In addition, Ultrabond ECO 575 can be used to install various types of carpet in vertical/wall applications.

Ultrabond G19 is a two-part reactive adhesive specially designed for installation of floor coverings that demand a high-performance adhesive, such as sports flooring. Ultrabond G19 is excellent for high-performance indoor/outdoor installations of all types of floor coverings that demand reliable results in various weather conditions. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, and many other difficult-to-bond-to substrates. It is recommended for the installation of homogenous PVC, solid vinyl tile and planks, rubber sheet flooring, rubber tile (including radial rubber tile), rubber stair treads, wood parquet floors, vinyl composition tile (VCT), artificial-grass indoor/outdoor carpet, linoleum, mineral fibrous felt-backed sheet goods, carpet, and all types of cork flooring and underlayments.

Ultrabond G21 is a solvent-free, two-part reactive adhesive designed for extreme indoor and outdoor installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates. Use to install homogeneous PVC; solid vinyl tile and planks; rubber; w ood parquet floors; vinyl composition tile (VCT); artificial-grass carpet; linoleum; mineral fibrous felt-backed sheet goods; carpet; and cork.

Ultrabond G15 is a fast-setting, two-part reactive epoxy adhesive with low volatile organic compounds (VOCs), designed for the installation of virgin rubber and vinyl flooring. Ultrabond G15 provides the ultimate in bond and shear strength, and is recommended for high traffic installations and for superior indentation resistance.

Ultrabond G17 is a two-part reactive epoxy adhesive with low volatile organic compounds (VOCs), designed for the installation of electrostatic dissipitative or conductive flooring.

Novoplan 2 Plus is a high-strength, self-leveling cement-based underlayment and repair mix with quicker curing time, for interior concrete and engineer-approved floors.

Novoplan Easy Plus is an improved, high-strength, self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors. Its unique formulation allows for direct application on substrates that are clean, securely bonded and properly primed.

Primer E is a two-component, 100%-solids epoxy primer and bonding agent designed for use with MAPEI self-leveling underlayments and toppings. Primer E is the most effective method for bonding to nonporous, dense substrates before installing self-leveling underlayments or toppings subject to high stress. Primer E is highly recommended for all installations of decorative toppings (such as Ultratop ® ), which demand the highest degree of crack resistance and surface finish. Primer E low viscosity makes installation fast and easy, and provides excellent penetration into the substrate and therefore tenacious bond.

Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayments and topping materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and self-leveling underlayment or topping materials.

Primer T is a low-VOC, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT) and adhesive residue, as well as profiled, absorbent surfaces. Suitable for a wide variety of substrates, Primer T combines excellent versatility with an easy, low-odor application.

Primer WE (formerly Ultraprime WE) is a two-component, polymer-modified, solvent-free water-based epoxy primer for enhanced adhesion to nonporous substrates prior to the application of MAPEI self-leveling materials. When mixed, Primer WE is purple for easy identification. It improves adhesion over smooth, nonabsorbent and difficult-to-bond-to substrates such as properly prepared ceramic tile, cement-based terrazzo, old cutback adhesive residue and approved plywood subfloors.

Self-Leveler Plus is a high-strength, regular-setting, cement-based, self-leveling underlayment, for use over interior concrete, plywood and other approved floor surfaces. Self-Leveler Plus is convenient and easy to use. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.

Ultraplan Easy is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling underlayment that typically requires only a clean, soundly bonded substrate before application. Typically requiring reduced surface preparation, Ultraplan Easy provides lower installation costs and fast turnaround on job sites. It features high strength and is able to withstand light foot traffic after 2 to 3 hours of installation.

Ultraplan 1 Plus is an HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, polyurethane adhesive specifically designed for seaming and direct bonding of synthetic turf in high-performance sports installations. Ultrabond Turf PU 1K can be used in both interior and exterior applications and has excellent weather resistance. Ultrabond Turf PU 1K meets FIFA requirements for bond and shear in sports turf applications.

Ultrabond ECO 570 is a moisture-curing, one-component, polyurethane polymer adhesive specifically designed for the direct bonding of high-performance reground-rubber sports flooring in interior or exterior applications. Its unique formulation is perfectly suited for most types of reground-rubber sports flooring and provides an aggressive and durable bond. Ultrabond ECO 570 utilizes rapidly renewable raw materials as part of the formulation and is free of phthalate plasticizers.

Ultrabond ECO 560 is a proprietary acrylic polymer-based adhesive with enhanced bonding characteristics specifically for rubber sheet and tile flooring. It can also be used to bond solid vinyl sheet, plank and tile; vinyl composition tile (VCT); and felt-backed vinyl sheet flooring. Ultrabond ECO 560 flashes quickly to its tacky phase and is suitable for use over porous and nonporous substrates. Its unique performance characteristics, non-hazardous components and low volatile organic content make it suitable for use when two-component urethane products cannot be recommended.

Ultrabond G19 is a two-part reactive adhesive specially designed for installation of floor coverings that demand a high-performance adhesive, such as sports flooring. Ultrabond G19 is excellent for high-performance indoor/outdoor installations of all types of floor coverings that demand reliable results in various weather conditions.

Ultrabond G21 is a solvent-free, two-part reactive adhesive designed for extreme indoor and outdoor installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates. Use to install homogeneous PVC; solid vinyl tile and planks; rubber; w ood parquet floors; vinyl composition tile (VCT); artificial-grass carpet; linoleum; mineral fibrous felt-backed sheet goods; carpet; and cork.

Ultrabond Turf Tape is a PET-based, spun-bonded fabric with a polyethylene film attached specifically to work with Ultrabond ECO® 590 turf adhesive for seaming artificial turf. Ultrabond Turf Tape is waterproof and provides superior tensile strength and tear resistance, which is vital for installations of professional athletic playing fields. It is also perfectly suited as a seaming base for other artificial turf applications, including installations of residential landscaping, playgrounds and golf courses.

Ultrabond Turf PU 2K is a high-performance, two-component, fast-set urethane adhesive designed for the high-performance seaming and direct bonding of artificial turf used in athletic and landscape applications. Ultrabond Turf PU 2K is particularly suited for use in areas of low ambient relative humidity and in cool temperatures. Ultrabond Turf PU 2K is colored green to blend in with most artificial turf products and cures within 2 to 4 hours to a tough durable bond. Ultrabond Turf PU 2K provides seam strengths that are in compliance with FIFA standards.

Mapelastic 315 is a trowel-applied, two-component, flexible, fiber-reinforced waterproofing and crack-isolation membrane. Mapelastic 315 meets ANSI A118.10 requirements for waterproofing and is IAPMO-listed as a shower-pan liner.

Click Here for Ultracoat Systems for Finishing Wood Flooring Catalog

Ultrabond ECO 975 capitalizes on MAPEI's Ultralite Technology' to provide a lightweight, 100%-solids, one-component moisture-cured urethane adhesive specifically designed for the installation of engineered wood flooring. Ultrabond ECO 975 reduces the pail weight by approximately 33% and yet provides similar coverage when compared with traditional urethane products. Ultrabond ECO 975 is easier to trowel, has excellent trowel-ridge hold, provides quick grab and offers excellent final bond strength.

Ultrabond ECO 995 is MAPEI's premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond and moisture vapor emission control on concrete slabs (up to 15 lbs. (6,80 kg) in MVER or 85% relative humidity). Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing project. The formulation of Ultrabond ECO 995 has been developed using rapidly renewable raw materials and provides the ultimate in bonding environmentally sensitive wood flooring.

Ultrabond ECO 960 is a professional-grade, high-tack, high-solids wood-flooring adhesive specifically designed for the installation of traditional engineered wood floors. Use for the installation of engineered wood plank, acrylic impregnated plank and wood parquet.

Ultrabond ECO 985 is MAPEI's premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds. Ultrabond ECO 985 provides all the bond security of a urethane wood-flooring adhesive, but is easier to clean and has a better coverage rate.

Ultrabond ECO 980 is MAPEI's 100%-solids, one-component moisture-cured urethane adhesive, recommended for mainstream wood floor installation. Ultrabond ECO 980's formulation is perfectly suited for traditional solid wood flooring and engineered wood flooring of all sizes. Easy to trowel, Ultrabond ECO 980 exhibits quick grab to hold planks in place during installation, yet it provides enough slip time to align everything perfectly.

Mapeguard 2 is a next-generation, flexible thin, 40-mil lightweight, load-bearing, fabric-reinforced "peel-and-stick" crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with any polymer-modified cement-based mortar. Glue-down wood flooring can also be installed with any MAPEI urethane adhesive.

ltrabond Urethane Cleaner is a ready-to-use urethane adhesive cleaner designed to effectively remove wet urethane adhesive residues, such as Ultrabond ECO® 975, Ultrabond ECO 980, Ultrabond ECO 990 and Ultrabond ECO 995, from the surface of prefinished wood flooring. It is low-odor, nonflammable, pH-neutral and biodegradable. Safe for use on most types of prefinished wood flooring including parquet, engineered, solid and bamboo, Ultrabond Urethane Cleaner also removes urethane adhesive from trowels and tools.

MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for use under MAPEI's peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer greatly increases the bond of MAPEI's peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

Ultrabond 905 is a fast-curing, 100%-solids, moisture-cured urethane gun-grade adhesive designed for basic wood subfloor construction practices as well as wood-flooring repair, wood stair nosings, wood molding, baseboards, and tack strip attachment to concrete subfloors. Ultrabond 905 is also a general-purpose construction adhesive suitable for use in both interior and exterior applications. Ultrabond 905 exceeds all requirements of AFG-01 and ASTM D3498-03 for bonding plywood to lumber framing.

MAPEI’s Mapeproof sodium bentonite waterproofing membranes have been proven, worldwide, to be the most consistent and reliable products of their kind. Certified as manufactured in accordance with ISO 9001, both Mapeproof HW and Mapeproof SW are constructed using a layer of woven and nonwoven, puncture- and tear-resistant polypropylene fabrics. Encased within these fabrics is high‐swelling, self‐sealing sodium bentonite; loaded at an industry leading rate of 1.1 lbs. per sq. ft. (5.3 kg per m2), minimum. The process by which the sodium bentonite is encased within these fabrics ensures that, regardless of hydration cycles and/or the geometric plane in which it is installed, the membrane will perform as designed. 

MAPEI’s Mapeproof sodium bentonite waterproofing membranes have been proven, worldwide, to be the most consistent and reliable products of their kind. Certified as manufactured in accordance with ISO 9001, both Mapeproof HW and Mapeproof SW are constructed using a layer of woven and nonwoven, puncture- and tear-resistant polypropylene fabrics. Encased within these fabrics is high‐swelling, self‐sealing sodium bentonite; loaded at an industry leading rate of 1.1 lbs. per sq. ft. (5.3 kg per m2), minimum. The process by which the sodium bentonite is encased within these fabrics ensures that, regardless of hydration cycles and/or the geometric plane in which it is installed, the membrane will perform as designed. 

Mapethene HT and Mapethene LT are 60-mil-thick, self-adhering sheet waterproofing membranes composed of an impact-resistant, cross- laminated high densitypolyethylene (HDPE) film 4 mils thick, which is laminated onto a proprietary rubberized asphalt 56 mils thick. 

Mapethene HT and Mapethene LT are 60-mil-thick, self-adhering sheet waterproofing membranes composed of an impact-resistant, cross- laminated high densitypolyethylene (HDPE) film 4 mils thick, which is laminated onto a proprietary rubberized asphalt 56 mils thick. 

Mapedrain 30 is designed for horizontal applications that demand very high compressive strength and flow rates. Its woven filter fabric allows concrete to be poured directly on top of the drainage composite.  

Mapedrain 50 is an extra high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 50's woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics.

Mapebond 700 is a quick-drying, solvent-based, high-tack contact adhesive. It is specifically formulated to promote maximum adhesion of MAPEI waterproofing membranes to various substrates.

Low-VOC, Solvent-Based Contact Adhesive, Mapebond 710 is a low-VOC, quick-drying, solvent-based, high-tack contact adhesive.

Water-Based Contact Adhesive, Mapebond 720 is a quick-drying, water-based, high-tack contact adhesive. 

Mapebond 740 Contact Adhesive is a quick-drying, VOC-compliant, high-tack aerosol contact adhesive in a portable spray system. It is specifically formulated to promote maximum adhesion of MAPEI waterproofing membranes, protection courses, drainage composites and insulation to various substrates.

Idrostop is is used to produce watertight construction joints in civil, industrial and hydraulic construction. Construction joints created with Idrostop are watertight up to 5 atm of pressure. Unlike materials made of alternate composition that lose efficiency in repeated wet/dry cycling, Idrostop's unique composition allows it to maintain performance even in aggressive environments.

Mapeband TPE is a professional-grade, highly durable and flexible band for sealing and waterproofing expansion joints and cracks subject to movement up to 7/32" (5,5 mm). TPE, an acronym for "elastomeric thermoplastic polyolefine," represents a group of polyolefines that combine the best properties of thermoplastic polymers and synthetic elastomer technology.

Mapebond 740 Spray Gun is required to properly dispense the spray-applied, aerosol Mapebond 740 Contact Adhesive. The spray gun is designed so that it can be adjusted to spray from a narrow to a wide pattern. The spray tip also can be changed without the need to evacuate contact adhesive from the spray hose. Mapebond 740 Spray Gun comes with a 6501 spray tip already installed. Alternate and replacement spray tips can be purchased from most industrial supply and paint distributors.

Mapecover 810 is a rigid, lightweight, extruded polystyrene (XPS), fanfold protection board designed to protect MAPEI waterproofing membranes on vertical below-grade foundations during the placement of backfill. Mapecover 810 also can be used in planters as a vertical protection course for MAPEI waterproofing membranes.

Structural Strengthening Catalog 

MAPEI products can contribute to green building standards and certification systems, such as LEED, the Living Building Challenge, the WELL Building Standard and other standards in areas including recycled content, low volatile organic compound (VOC) content and emissions, and reduced impact on human health and the environment.  From material sourcing through packaging disposal, transparency of a product at each stage of its life cycle has become a critical driver in specifying building products/materials and purchasing. As proof of our commitment to sustainability, MAPEI offers the following current and relevant third-party verified certifications and sustainable attributes, such as: Environmental Product Declarations (EPDs)Material Ingredients Report; Manufacturer’s Inventory (MI)Low Volatile Organic Compound (VOC) emissions that meet California Department of Health (CDPH) Standard Method v1.2-2017Recycled ContentGreen SquaredRed List Free Chemicals