This superior insulation product has glass fiber reinforced aluminum foil facers. The exposed side has a heavy 12mil aluminum reflective surface and is designed to provide an attractive interior finish without the need for a thermal barrier - up to 4.5" on walls or 12" on ceilings.

Rmax ECOMAXci® FR Air Barrier has glass fiber reinforced aluminum foil facers on both sides - offering enhanced durability, dimensional stability and fire performance. ECOMAXci® FR Air Barrier allows for optimum efficiency through multiple design options, ease of construction, a better building envelope and reduced energy usage.

Rmax ECOMAXci® Ply is a composite product of polyiso insulation with inorganic, polymer coated glass fiber mat facers bonded to 5/8" or 3/4" fire retardant treated plywood (FRTP). This insulation has been tested for multiple NFPA 285 assemblies and is approved for use in exterior walls of buildings of any height.

Rmax ECOMAXci® FR Ply is a Class A energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam core with glass fiber reinforced aluminum facers on both sides bonded to 5/8" or 3/4" fire retardant treated plywood.ECOMAXci® FR Ply has been tested per NFPA 285 and successfully passed. The NFPA 285 listing/approval is dependent on all components of the assembly. Third party evaluations and listings should also be consulted for specific instructions.

Rmax ECOMAXci® Ply is a composite product of polyiso insulation with inorganic, polymer coated glass fiber mat facers bonded to 5/8" or 3/4" fire retardant treated plywood (FRTP). This insulation has been tested for multiple NFPA 285 assemblies and is approved for use in exterior walls of buildings of any height.

Just like TSX-8500, this product is designed for use without a thermal barrier (up to 4.5" on walls or 12" on ceilings) to provide an attractive interior finish. The difference is that the exposed side of TSX-8510 has a heavy 12mil white aluminum surface.

This lightweight thermal insulation board has reinforced aluminum foil facers. Thermasheath® is suitable for use in cavity walls, masonry walls, vaulted ceilings and some limited roofing applications, as well as many other building envelope continuous insulation applications. It is also an integral piece to maintaining the continuous insulation solution when Thermasheath®-SI is used as intermittent bracing.

Durasheath® offers energy performance and superior durability with its non-metallic, inorganic polymer coated glass fiber mat facers. It is intended for use in exterior walls with stucco veneer, concrete sandwich panels and many other building envelope applications, including those where an impermeable foil faced product is not desired.

The EVOMAXci™ System utilizes our ECOMAXci™ continuous insulation as it offers enhanced R-values and a barrier to any infiltration. ECOMAXci' has glass fiber reinforced aluminum foil facers on both sides, which provides the system with superior durability, dimensional stability and fire performance.

Rmax ECOMAXci® FR Ply is a Class A energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam core with glass fiber reinforced aluminum facers on both sides bonded to 5/8" or 3/4" fire retardant treated plywood. ECOMAXci® FR Ply has been tested per NFPA 285 and successfully passed. The NFPA 285 listing/approval is dependent on all components of the assembly. Third party evaluations and listings should also be consulted for specific instructions.

The glass fiber/organic mat facers make this product compatible with virtually any roofing system. Specify Multi-Max® FA-3 for use with single ply, built-up and modified bitumen membranes or metal panel roofing applications.

This energy reducing thermal insulation has inorganic polymer coated glass fiber mat facers. Ultra-Max® is suitable for use in constructions utilizing built-up, modified bitumen and mechanically attached single ply, as well as many other roofing systems.

Rmax Ultra-Max® HD is a high density roof cover board composed of a closed-cell polyisocyanurate (polyiso) foam core bonded to inorganic polymer coated glass fiber mat facers on both sides. Ultra-Max® HD is approved for use in insulated roofing system constructions of new and re-roofing applications.

Re-Cover Board-3 provides improved energy efficiency to many retrofit applications and comes with either glass fiber/organic mat (GRF) or coated glass fiber (CGF) facers. It may be used in recover type applications where the existing roof system, including the deck below, is still sound and firmly attached.

Tapered Thermaroof®-3 improves roof drainage as designed with standard slopes of 1/8", 1/4" or 1/2" per foot. Tapered systems utilize flat Multi-Max® FA-3 to build up thickness for roof design.

Tapered Ultra-Max® improves roof drainage as designed with standard slopes of 1/8", 1/4" or 1/2" per foot. Tapered systems utilize flat Ultra-Max® to build up thickness for system design.

Rmax TSP-3 is an energy-efficient thermal insulation board composed of an environmentally sound closed-cell polyiso foam core bonded to glass fiber reinforced aluminum foil facers on each side. This energy-efficient roof insulation is ideal for use in constructions utilizing metal panel roof systems. Thermaroof® Plus-3 is approved for use in new roof constructions and limited retrofit/recover roof constructions over steel, wood, non-combustible and certain types of nailable roof decks.

Nailable Base-3, an all-in-one roof insulation and nailing surface, has a 7/16" thick OSB nailing panel bonded to a polyiso foam board with glass fiber/organic mat facers. It is designed for use with concrete, slate or clay roofing tiles, as well as wood shakes, asphalt shingles and metal panel roofing systems.

This lightweight thermal insulation board has reinforced aluminum foil facers. Thermasheath® is suitable for use in cavity walls, masonry walls, vaulted ceilings and some limited roofing applications, as well as many other building envelope continuous insulation applications. It is also an integral piece to maintaining the continuous insulation solution when Thermasheath®-SI is used as intermittent bracing.

Thermasheath®-SI is a composite product made up of energy-efficient insulation and a structural component and is designed to work seamlessly with non-structural Rmax Thermasheath®-3. The insulation component is a closed-cell polyiso foam bonded to reflective, reinforced aluminum facers. The structural component is a board made up of pressure laminated plies of cellulosic fibers specially treated with a water-resistant adhesive. Thermasheath®-SI is suitable for use in residential wood stud construction. Furthermore, with 1/2" interior gypsum, it is designed to be a one-to-one substitute for wood sheathing in shear wall resistance.

Rmax Thermasheath®-XP has a closed-cell polyiso foam core bonded on both sides to highly durable, embossed aluminum facers. One side is white with a modified acrylic coating and the other side has a clear coating for a silver, reflective finish. Either side can be left exposed up to 4.5" on walls or 12" on ceilings - offering visual flexibility and value. This insulation is ideal for basements, crawls spaces and many other continuous insulation applications. Thermasheath®-XP is designed for use without a thermal barrier to provide an attractive interior finish.

Durasheath® offers energy performance and superior durability with its non-metallic, inorganic polymer coated glass fiber mat facers. It is intended for use in exterior walls with stucco veneer, concrete sandwich panels and many other building envelope applications, including those where an impermeable foil faced product is not desired.

R-Matte® Plus-3 is a versatile multi-application product with a durable white-matte (non-glare) reinforced aluminum facer and a reflective reinforced aluminum facer. This thermal insulation is designed for use in cavity walls, masonry walls, vaulted ceilings and many other building envelope continuous insulation applications. R-Matte® Plus-3 is an excellent choice for many do-it-yourself applications to add insulation value to any project.

This superior thermal insulation board is a composite product manufactured with Rmax Thermasheath®-3 or Rmax Durasheath®-3 as the insulation layer bonded to a nailing surface. The standard nailing surface for ThermaBase-CI is 7/16" OSB (APA rated). Alternate nailing surfaces, such as 5/8" or 3/4" OSB or CDX plywood, are available upon request. ThermaBase-CI™ is engineered to allow for normal expansion of the wood without gaping the insulation layer.

The glass fiber/organic mat facers make this product compatible with virtually any roofing system. Specify Multi-Max® FA-3 for use with single ply, built-up and modified bitumen membranes or metal panel roofing applications.

Nailable Base-3, an all-in-one roof insulation and nailing surface, has a 7/16" thick OSB nailing panel bonded to a polyiso foam board with glass fiber/organic mat facers. It is designed for use with concrete, slate or clay roofing tiles, as well as wood shakes, asphalt shingles and metal panel roofing systems.

Re-Cover Board-3 provides improved energy efficiency to many retrofit applications and comes with either glass fiber/organic mat (GRF) or coated glass fiber (CGF) facers. It may be used in recover type applications where the existing roof system, including the deck below, is still sound and firmly attached.

This energy reducing thermal insulation has inorganic polymer coated glass fiber mat facers. Ultra-Max® is suitable for use in constructions utilizing built-up, modified bitumen and mechanically attached single ply, as well as many other roofing systems.

Rmax TSP-3 is an energy-efficient thermal insulation board composed of an environmentally sound closed-cell polyiso foam core bonded to glass fiber reinforced aluminum foil facers on each side. This energy-efficient roof insulation is ideal for use in constructions utilizing metal panel roof systems. Thermaroof® Plus-3 is approved for use in new roof constructions and limited retrofit/recover roof constructions over steel, wood, non-combustible and certain types of nailable roof decks.

R-SEAL 2000 LFR-SEAL 3000 / 3000WR-SEAL 6000R-SEAL CONSTRUCTION TAPE

FLEX-TITE INSULATION CLIPSQUICK CLIP

1 3/4" PLASTI-GRIP CI WASHER AND GRIP DECK SCREWS2" THERMAL-GRIP CI WASHER AND GRIP-DECK SCREWSNAIL BOARD FASTENERS: SIPTP, SIPLD AND SIPHDPLASTI-GRIP PMF

April 24, 2020 Dear Valued Customer: The health and safety of our employees, customers, and of their families are of the upmost importance to Sika. Since the development of COVID-19 in the United States, Sika Corporation has taken several measures for the continued good well-being and that our business remains operational to supply and service our customers in these unprecedented times. ..click here for more