HySecurity Gate Operators
undefined by HySecurity Gate Operators
Automated Gate Systems
CONTACT INFO
HySecurity Gate Operators image | Industrial Hydraulic Traffic Control Barrier Arm Operator Overview
HySecurity Gate Operators image | HySecurity Gate Operators

StrongArm

STRONGARM controls traffic and parking applications with ultra-low maintenance and decades long life. Tens of thousands of StrongArms are installed on corporate parking lots, airport runways and Department of Transportation roadways. The StrongArm 36 raises a 36 ft arm in 8 seconds while the shorter StrongArm 14F speeds a 10 to 14 ft arm open in 2 seconds. All StrongArm UPS models provide full functionality during AC power outage. SECURE, STRONG uni-body 10 gauge welded and zinc plated steel chassis, with powder coat safety yellow for high visibility and an enduring, attractive finish. Keyed T-lock protects all electrical controls and parts from vandalism. Side mount arms up to 18 ft. Center yoke mounts up to 36 ft, (up to 20 ft without counterweights). Aluminum arms up to 24 ft or aluminum-fiberglass arm options for longer arms. DOT model has breakaway arm mount and galvanized finish. Optional arm light kit.EASILY CONFIGURE GATE OPERATION to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs. Make loop problems go away with Hy5B™: The loop detector with automatic sensitivity adjustment, advanced tailgating detection, and loop health scoring.CONNECT AND REPORT: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders. FAST StrongArm 14F speeds a 10 to 14 ft arm open to a full 90 degrees in just 2 seconds. Arm will remain vertical when held open. Operator comes standard with lightweight, oval, aluminum arm with lights and bumper and HyProtect™ breakaway arm mount, plus a kill switch, which stops arm motion after vehicle strike. EXTRA LONG ARMS The StrongArm 36 raises a 36 ft arm in just 8 seconds. Ideal for airports, ferry terminals and other multi-lane applications. DOT StrongArmDOT 28 is designed specifically for Department of Transportation (DOT) traffic applications where safety, functionality,long-life, and very low maintenance are demanded. StrongArmDOT features a “breakaway arm" that pivots and returns to its centered position after being hit; perfect for reversible traffic lanes, traffic metered highway on-ramps and other controlled roadway applications. Arm lengths up to 28 ft can meet full 90 degree open in 5 seconds. Arm can rest in open or closed position. Hot dipped galvanized steel chassis with stainless steel cover provides superior anti-corrosion protection. Optional arm light kit.DC POWER SUPPLY (UPS MODELS ONLY) The Uninterruptible DC Power Supply provides 300 cycles UPS backup after an AC power loss.*** Retain full functionality during an AC power outage using HySecurity's advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). AC POWER SUPPLY WITH HYINVERTER AC Optional AC Power Supply w/HyInverter AC™ provides UPS battery backup for 208/230VAC single-phase barrier arms, providing up to 300 cycles after an AC power loss. See page 374 for more information. Note: HySecurity's DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 6 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support.
Rated 5 based on 1 product reviews