Stainless Steel Tensioning and Mounting Hardware
Adjust-A-Body® with Extended Length Lag for Composite Sleeved Posts
Exposed, swaged, tensioning, face-of-the-post-mounted fitting suitable for level or pitched runs and is available for 1/8˝ and 3/16˝ diameter 1x19 stainless steel cable.
Can be used with any fitting on the opposite end of the run.
Consists of two separate pieces: the articulating Lag Bolt and Adjust-a-Body® tensioning body.
Threaded Clevis is installed into a pre-drilled or tapped hole in the end post.
Cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable.Use of this fitting requires an appropriate sized ferrule that is swaged onto the cable, which much be purchased separately.
Once sufficient tension is achieved, the Lock Nut is secured against the end of the body to secure the fitting from loosening.