MasterFormat: 2014
SpecWizard: customize this spec    Download this Aluminum Windows and Terrace Doors Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
WinDoor Aluminum Windows and Terrace Doors
 
         
SECTION 08 51 13
 
         
ALUMINUM WINDOWS AND TERRACE DOORS
 
         
 
         
Copyright 2019 - 2020 ARCAT, Inc. - All rights reserved

          ** NOTE TO SPECIFIER ** WinDoor; aluminum windows and terrace doors.
This section is based on the products of WinDoor, which is located at:
7500 Amsterdam Dr.
Orlando, FL 32832
Tel: 407-481-8400
Fax: 407-481-0505
Email: jredden@pgtindustries.com
Web: http://windoorinc.com
[ Click Here ] for additional information.
Our craftsmanship, attention to detail, and ultra-high-performance ratings have made WinDoor the product of choice for five-star resorts, luxury high-rise condominiums, and celebrity mansions along the US coastline for over 15 years. Manufacturing from our 320,000 square foot facility in Orlando, Florida; our aluminum, vinyl, and thermally-broken I-strut aluminum products are AAMA, ASTM and Miami-Dade -Florida approvals & TDI approved products are always available in BIG SIZES, custom colors and custom configurations.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.Aluminum Windows of the Following Types:
          1.Picture windows. (3000 Series)
          2.Single hung windows. (4000 Series)
          3.Window wall. (4030 Series)
          4.Horizontal rolling windows. (4070 Series)
          5.Thermally broken picture windows. (9020 Series)
          6.Thermally broken casement windows. (9060 Series)
          7.Thermally broken fixed casement windows. (9063 Series)
          8.Thermally broken awning windows. (9066 Series)
          9.Thermally broken single hung windows. (9400 Series)
          10.Thermally broken horizontal rolling windows. (9470 Series)
          11.Estate Collection Series:
          a.Casement windows. (238 series)
          b.Project-out windows. (238 series)
          c.Fixed/designer (picture) windows. (238 series)
          d.Single hung windows. (360 series)
          e.Horizontal rolling windows. (375 series)
          f.Fixed (picture) windows. (410 series)
 
          B.Aluminum Doors of the Following Types:
          1.Swing doors. (9050 Series)
          2.Pivot doors. (PV9998A Series)
          3.Impact resistant doors. (Estate collection series)
          a.French doors, sidelites and transoms. (450 series)
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 06 10 00 - Rough Carpentry.
 
          B.Section 07 91 23 - Backer Rods.
 
          C.Section 08 43 29 - Sliding Storefronts.
 
          D.Section 08 53 00 - Plastic Windows.
 
          E.Section 08 83 13 - Mirrored Glass Glazing.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.American Architectural Manufacturers Association (AAMA).
 
          B.ASTM International (ASTM):
          1.ASTM E283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen.
          2.ASTM A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Product.
          3.ASTM E331 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference.
          4.ASTM E547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference.
 
          C.Florida Building Code (FBC).
          1.Florida High-Velocity Hurricane Zones (HVHZ).
 
          D.Miami-Dade County Test Application Standards (TAS) adopted by FBC:
          1.FBC TAS 202 - Criteria for Testing Impact and Nonimpact Resistant Building Envelope Components Using Uniform Static Air Pressure.
          2.FBC TAS 203 - Criteria for Testing Products Subject to Cyclic Wind Pressure Loading.
 
          E.National Fenestration Rating Council (NFRC).
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01 30 00 - Administrative Requirements.
 
          B.Product Data:
          1.Manufacturer's data sheets on each product to be used.
          2.Preparation instructions and recommendations.
          3.Storage and handling requirements and recommendations.
          4.Typical installation methods.
          ** NOTE TO SPECIFIER ** Delete if not applicable to product type.
 
          C.Verification Samples: Two representative units of each type, size, pattern and color.
 
          D.Shop Drawings: Include details of materials, construction and finish. Include relationship with adjacent construction.
 
          1.5QUALITY ASSURANCE
 
          A.Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum five years documented experience.
 
          B.Installer Qualifications: Company specializing in performing Work of this section with minimum two years documented experience with projects of similar scope and complexity.
 
          C.Source Limitations: Provide each type of product from a single manufacturing source to ensure uniformity.
          ** NOTE TO SPECIFIER ** Include mock-up if the project size or quality warrant the expense. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          D.Mock-Up: Construct a mock-up with actual materials in sufficient time for Architect's review and to not delay construction progress. Locate mock-up as acceptable to Architect and provide temporary foundations and support.
          1.Intent of mock-up is to demonstrate quality of workmanship and visual appearance.
          2.If mock-up is not acceptable, rebuild mock-up until satisfactory results are achieved.
          3.Retain mock-up during construction as a standard for comparison with completed work.
          4.Do not alter or remove mock-up until work is completed or removal is authorized.
 
          1.6PRE-INSTALLATION CONFERENCE
 
          A.Convene a conference approximately two weeks before scheduled commencement of the Work. Attendees shall include Architect, Contractor and trades involved. Agenda shall include schedule, responsibilities, critical path items and approvals.
 
          1.7DELIVERY, STORAGE, AND HANDLING
 
          A.Store and handle in strict compliance with manufacturer's written instructions and recommendations.
 
          B.Protect from damage due to weather, excessive temperature, and construction operations.
 
          1.8PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
 
          1.9WARRANTY
 
          A.Manufacturer's Warranty: Provide manufacturer's standard limited warranty.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: WinDoor, which is located at: 7500 Amsterdam Dr.; Orlando, FL 32832; Tel: 407-481-8400; Fax: 407-481-0505; Email: JRedden@pgtindustries.com; Web: http://windoorinc.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
          ** NOTE TO SPECIFIER ** Delete article if not required.
 
          2.2ALUMINUM WINDOWS
          ** NOTE TO SPECIFIER ** Enjoy viewing your lush landscape through our non-operable fixed window. Pair this picture window with our elite aluminum sliding glass doors and operable windows. Heavy duty materials for high impact and non-impact applications are used, all while providing great NFRC ratings. Delete if not required.
 
          A.Basis of Design: 3000 Series Aluminum Picture Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 165 psf (7.9 kPa) and negative 165 psf (7.9 kPa).
          c.Water Resistance: 24.75 psf (1.19 kPa).
          2.Configuration: Fixed window.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 12 inches (305 mm) minimum.
          b.Width: 72 (1829 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 12 inches (305 mm) minimum.
          f.Height: 120 inches (3048 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          4.Frame: Fin frame.
          5.Frame: Flange frame.
          6.Frame: Flush frame.
          7.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          8.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          9.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          10.Finish: Clear anodized. Finish Warranty: 5 years.
          11.Finish: Applied woodgrain. Finish Warranty: 10 years.
          12.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          13.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** The WinDoor aluminum window wall is an operable single hung window mulled within its own frame to a picture window below. With this product, you can enjoy a wonderful outside view with a ceiling to floor window wall. This choice product is completely glazed at our factory for high impact and non-impact certifications. High performance NFRC ratings are also achieved with our top notch material and construction. Delete if not required.
 
          B.Basis of Design: 4000 Series Single Hung Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 120 psf (5.75 kPa) and negative 150 psf (7.18 kPa).
          c.Water Resistance: 18 psf (0.86 kPa).
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          2.Configuration: Single hung window, single vent.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 16 inches (406 mm) minimum.
          b.Width: 53 inches (1346 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 22 inches (559 mm) minimum.
          f.Height: 96 inches (2438 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          3.Configuration: Single hung window, factory twins.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 107 inches (2718 mm) maximum.
          b.Width: As indicated on Drawings.
          c.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          d.Height: 76 inches (1930 mm) maximum.
          e.Height: As indicated on Drawings.
          f.Height: _____.
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          5.Frame: Fin. Depth: 3-1/2 inches (89 mm).
          6.Frame: Flange. Depth: 3-1/2 inches (89 mm).
          7.Frame: Flush. Depth: 3-1/2 inches (89 mm).
          8.Dual balance system.
          ** NOTE TO SPECIFIER ** Double sweep locks are standard. Double sill locks are optional. Delete locking option not required.
          9.Locking: Double sweep locks.
          10.Optional Locking: Double sill locks.
          11.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          12.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          13.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          14.Finish: Clear anodized. Finish Warranty: 5 years.
          15.Finish: Applied woodgrain. Finish Warranty: 10 years.
          16.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          17.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** The WinDoor aluminum window wall is an operable single hung window mulled within its own frame to a picture window below. With this product, you can enjoy a wonderful outside view with a ceiling to floor window wall. This choice product is completely glazed at our factory for high impact and non-impact certifications. High performance NFRC ratings are also achieved with our top notch material and construction. Delete if not required.
 
          C.Basis of Design: 4030 Series Aluminum Window Wall; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 120 psf (5.75 kPa) and negative 150 psf (7.18 kPa).
          c.Water Resistance: 18.0 psf (0.86 kPa).
          2.Configuration: Single hung window over fixed window.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 16 inches (406 mm) minimum.
          b.Width: 53 inches (1346 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 60 inches (1524 mm) minimum.
          f.Height: 120 inches (3048 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          4.Frame: Fin frame.
          5.Frame: Flange frame.
          6.Frame: Flush frame.
          7.Dual balance system.
          ** NOTE TO SPECIFIER ** Double sweep locks are standard. Double sill locks are optional. Delete option not required.
          8.Locking: Double sweep locks.
          9.Locking: Double sill locks.
          10.Mullions: Specially designed field mullions.
          ** NOTE TO SPECIFIER ** Delete size options not required.
          a.Size: 1 x 4 inch (25 x 102 mm).
          b.Size: 2 x 4 inch (51 x 102 mm).
          11.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          12.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          13.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          14.Finish: Clear anodized. Finish Warranty: 5 years.
          15.Finish: Applied woodgrain. Finish Warranty: 10 years.
          16.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          17.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Open up your kitchen with a pass-through horizontal rolling window. Choose between either 1 or 2 sashes within one continuous frame. With our double window, one sash slides left or right bypassing the other fixed glass. The triple window operates on the left and right sashes, bypassing the center fixed glass. Picture a single hung window on its side with rollers and you have yourself a fashionable pass-through to the exterior. This modern look boasts a high performance rating on high impact and non-impact certifications. Delete if not required.
 
          D.Basis of Design: 4070 Series Horizontal Rolling Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 90 psf (4.31 kPa) and negative 150 psf (7.18 kPa).
          c.Water Resistance: 13.5 psf (0.65 kPa).
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          2.Configuration: Horizontal rolling window, two panels.
          ** NOTE TO SPECIFIER ** Delete panel configuration options not required.
          a.Panel Configuration: XO.
          b.Panel Configuration: OX.
          c.Panel Configuration: XX.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          d.Width: 36 inches (914 mm) minimum.
          e.Width: 75 inches (1905 mm) maximum.
          f.Width: As indicated on Drawings.
          g.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          h.Height: 18 inches (457 mm) minimum.
          i.Height: 74 inches (1880 mm) maximum.
          j.Height: As indicated on Drawings.
          k.Height: _____.
          3.Configuration: Horizontal rolling window, three panels.
          a.Panel Configuration: XOX.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          b.Width: 36 inches (914 mm) minimum.
          c.Width: 112 inches (2845 mm) maximum.
          d.Width: As indicated on Drawings.
          e.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          f.Height: 18 inches (457 mm) minimum.
          g.Height: 74 inches (1880 mm) maximum.
          h.Height: As indicated on Drawings.
          i.Height: _____.
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          5.Frame: Fin. Depth: 3-1/2 inches (89 mm).
          6.Frame: Flange. Depth: 3-1/2 inches (89 mm).
          7.Frame: Flush. Depth: 3-1/2 inches (89 mm).
          8.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          9.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          10.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          11.Finish: Clear anodized. Finish Warranty: 5 years.
          12.Finish: Applied woodgrain. Finish Warranty: 10 years.
          13.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          14.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** With the strength of aluminum and the energy ratings of vinyl comes the thermally broken 9020 fixed window. Available in multiple shapes and sizes all while earning a high performance rating on high impact and non-impact certifications. Match this superior window with some of our thermally broken products. Matching rails are available for continuous sightlines, or choose mulled glass panes within one continuous frame. If you are trying to achieve durability and longevity in a high performance window, then look no further. Delete if not required.
 
          E.Basis of Design: 9020 Series Thermally Broken Aluminum Picture Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 150 psf (7.18 kPa) and negative 150 psf (7.18 kPa).
          c.Sound Transmission Class (STC): 41.
          d.Water Resistance: 30.0 psf (1.44 kPa).
          2.Configuration: Fixed window.
          ** NOTE TO SPECIFIER ** Delete shape options not required.
          a.Shape: Rectangle.
          b.Shape: Triangle.
          c.Shape: Pentagon.
          d.Shape: Tombstone.
          e.Shape: Chord.
          f.Shape: Hexagon.
          g.Shape: Octagon.
          h.Shape: Circle.
          i.Shape: Trapezoid.
          j.Shape: _____.
          k.Shape: As indicated on Drawings.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          l.Width: 12 inches (305 mm) minimum.
          m.Width: 72 inches (1829 mm) maximum.
          n.Width: As indicated on Drawings.
          o.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          p.Height: 12 inches (305 mm) minimum.
          q.Height: 144 inches (3658 mm) maximum.
          r.Height: As indicated on Drawings.
          s.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          4.Frame:
          a.Depth: 3-3/16 inches (81 mm).
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          b.Frame Style: Fin.
          c.Frame Style: Flange.
          d.Frame Style: Flush.
          e.Top Rail: Standard.
          f.Top Rail: Series 9060 Casement and Series 9066 Awning.
          g.Top Rail: Series 8100 SGD.
          h.Top Rail: Series 9050 Terrace Door.
          i.Bottom Rail: Standard.
          j.Bottom Rail: Series 9060 Casement and Series 9066 Awning.
          k.Bottom Rail: Series 8100 SGD.
          l.Bottom Rail: Series 9050 Terrace Door.
          m.Bottom Rail: Series 9050 Terrace Door, Series 8100 Tall.
          ** NOTE TO SPECIFIER ** Delete glass stop option not required.
          5.Glass Stop: Square.
          6.Glass Stop: Curved profile.
          7.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          8.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          9.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          10.Finish: Clear anodized. Finish Warranty: 5 years.
          11.Finish: Applied woodgrain. Finish Warranty: 10 years.
          12.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          13.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Find that classic look and feel of a casement window with a high performing, thermally broken WinDoor 9060. The window's crank handle located on the bottom of the window will smoothly operate your window in the open and close position. When fully open, there is full access to both the inside and outside of the sash for easy cleaning. When handle arm is not in use, it tucks away wonderfully. Unlike most casement units, the 9060 boasts a high performance rating on high impact and non-impact certifications. This window pairs beautifully with any of our thermal products. Delete if not required.
 
          F.Basis of Design: 9060 Series Thermally Broken Aluminum Casement Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          ** NOTE TO SPECIFIER ** Delete design pressure option not required.
          b.Design Pressure, Single Casement: Positive 100 psf (4.79 kPa) and negative 150 psf (7.18 kPa).
          c.Design Pressure, Twin Casement: Positive 100 psf (4.79 kPa) and negative 120 psf (5.75 kPa).
          d.Water Resistance: 20.0 psf (0.96 kPa).
          e.Sound Transmission Class (STC): 44.
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          2.Configuration: Single casement.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 22 inches (559 mm) minimum.
          b.Width: 37 inches (940 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 19 inches (483 mm) minimum.
          f.Height: 84 inches (2134 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          3.Configuration: Twin casement.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 22 inches (559 mm) minimum.
          b.Width: 74 inches (1880 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 19 inches (483 mm) minimum.
          f.Height: 72 inches (1829 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          5.Frame: Fin.
          6.Frame: Flange.
          7.Frame: Flush.
          ** NOTE TO SPECIFIER ** Delete glass stop option not required.
          8.Glass Stop: Square.
          9.Glass Stop: Curved profile.
          10.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          11.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          12.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          13.Finish: Clear anodized. Finish Warranty: 5 years.
          14.Finish: Applied woodgrain. Finish Warranty: 10 years.
          15.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          16.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Delete hardware finish options not required.
          17.Hardware Finish: Black.
          18.Hardware Finish: White.
          19.Hardware Finish: Silver.
          20.Hardware Finish: Brushed Nickel.
          ** NOTE TO SPECIFIER ** Fixed Casement Window. Delete if not required.
 
          G.Basis of Design: 9063 Series Thermally Broken Aluminum Fixed Casement Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          ** NOTE TO SPECIFIER ** Delete design pressure option not required.
          b.Design Pressure, Single Fixed Casement: Positive 135 psf (6.46 kPa) and negative 135 psf (6.46 kPa).
          c.Design Pressure, Twin Fixed Casement: Positive 150 psf (7.18 kPa) and negative 150 psf (7.18 kPa).
          d.Water Resistance: 22.5 psf (1.08 kPa).
          2.Configuration:
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          a.Single fixed casement.
          b.Twin fixed casement.
          ** NOTE TO SPECIFIER ** Maximum height for 60 inches (1524 mm) wide is 120 inches (3048 mm). Maximum height for 108 inches (2743 mm). wide is 60 inches (1524 mm). Delete size options not required.
          c.Width: 18 inches (457 mm) minimum.
          d.Width: 60 inches (1524 mm).
          e.Width: 108 inches (2743 mm).
          f.Width: As indicated on Drawings.
          g.Width: _____.
          h.Height: 18 inches (457 mm) minimum.
          i.Height: 60 inches (1524 mm).
          j.Height: 120 inches (3048 mm).
          k.Height: As indicated on Drawings.
          l.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          4.Frame: Fin.
          5.Frame: Flange.
          6.Frame: Flush.
          ** NOTE TO SPECIFIER ** Delete glass stop option not required.
          7.Glass Stop: Square.
          8.Glass Stop: Curved profile.
          9.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          10.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          11.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          12.Finish: Clear anodized. Finish Warranty: 5 years.
          13.Finish: Applied woodgrain. Finish Warranty: 10 years.
          14.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          15.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Delete hardware finish options not required.
          16.Hardware Finish: Black.
          17.Hardware Finish: White.
          18.Hardware Finish: Silver.
          19.Hardware Finish: Brushed Nickel.
          ** NOTE TO SPECIFIER This thermally broken awning window is not like the rest. Our awning window outperforms most with high impact and non-impact certifications. This window is similar to a casement style, but has a smooth operating lever on the side of the frame that controls the window in an open and closed position from the bottom out. Great for basements or matching up with the WinDoor 9060 Casement model. Delete if not required.
 
          H.Basis of Design: 9066 Series Thermally Broken Aluminum Awning Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 100 psf (4.79 kPa) and negative 150 psf (7.18 kPa).
          c.Water Resistance: 20.0 psf (0.96 kPa).
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          2.Configuration: Single awning.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 18 inches (457 mm) minimum.
          b.Width: 54 inches (1372 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 18 inches (457 mm) minimum.
          f.Height: 36 inches (914 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          3.Configuration: Twin awning.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 18 inches (457 mm) minimum.
          b.Width: 108 inches (2743 mm) maximum.
          c.Width: As indicated on Drawings.
          d.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          e.Height: 18 inches (457 mm) minimum.
          f.Height: 36 inches (914 mm) maximum.
          g.Height: As indicated on Drawings.
          h.Height: _____.
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          5.Frame: Fin.
          6.Frame: Flange.
          7.Frame: Flush.
          ** NOTE TO SPECIFIER ** Delete glass stop option not required.
          8.Glass Stop: Square.
          9.Glass Stop: Curved profile.
          10.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm).
          d.Profile: 2-1/4 inches (57 mm).
          e.Pattern: Standard.
          f.Pattern: Custom, as indicated on Drawings.
          g.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          11.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          12.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          13.Finish: Clear anodized. Finish Warranty: 5 years.
          14.Finish: Applied woodgrain. Finish Warranty: 10 years.
          15.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          16.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Delete hardware finish options not required.
          17.Hardware Finish: Black.
          18.Hardware Finish: White.
          19.Hardware Finish: Silver.
          20.Hardware Finish: Brushed Nickel.
          ** NOTE TO SPECIFIER ** The 9400 Series Single Hung Window is made up with our Thermally Broken Aluminum I-Strut technology to give you a window that is Energy Efficient for years to come. The Perfect Window System for Custom Homes Beach-Front Living or the Downtown High-Rise penthouse. Delete if not required.
 
          I.Basis of Design: 9400 Series Single Hung Thermally Broken Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 100 psf (4.79 kPa) and negative 160 psf (7.66 kPa).
          c.Water Resistance: 15 psf (0.72 kPa).
          d.Sound Transmission Class (STC): 41.
          2.Configuration:
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          a.Single Hung Window: Equal vents.
          b.Single Hung Window: Oriel.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          c.Width: 18 inches (457 mm) minimum.
          d.Width: 54 inches (1372 mm) maximum.
          e.Width: As indicated on Drawings.
          f.Width: _____.
          ** NOTE TO SPECIFIER ** Maximum height for equal vent is 76 inches. Maximum height or Oriel is 108 inches. Delete height options not required.
          g.Height: 36 inches (914 mm) minimum.
          h.Height: 76 inches (1930 mm).
          i.Height: 108 inches (2743 mm).
          j.Height: As indicated on Drawings.
          k.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Non-impact glazing.
          c.Impact rated glazing.
          d.Tint: Clear.
          e.Tint: _____.
          f.Tint: As indicated on Drawings.
          g.Tint: To be selected by Architect.
          h.Coating: Low-E.
          i.Coating: None.
          j.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          4.Frame: Fin.
          5.Frame: Flange.
          6.Frame: Flush.
          7.Locking: Double sweep locks.
          8.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Profile: 1 inch (25 mm).
          c.Profile: 2-1/4 inches (57 mm).
          d.Pattern: Standard.
          e.Pattern: Custom, as indicated on Drawings.
          f.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          9.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          10.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          11.Finish: Clear anodized. Finish Warranty: 5 years.
          12.Finish: Applied woodgrain. Finish Warranty: 10 years.
          13.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          14.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** The Perfect Window System for Custom Homes -Beach-Front Living or The Downtown High-Rise Penthouse. The 9470 Series Horizontal Roller Window is made up with our Thermally Broken Aluminum I-Strut Technology to give you a window that is Energy Efficient for years to come. Our Horizontal Rolling Window can also provide the convenience of a pass-through from the inside to the outdoor entertainment area. Delete if not required.
 
          J.Basis of Design: 9470 Series Horizontal Rolling Thermally Broken Window; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          b.Design Pressure: Positive 100 psf (4.79 kPa) and negative 160 psf (7.66 kPa).
          c.Water Resistance: 15 psf (0.72 kPa).
          2.Configuration: Horizontal rolling window, three panels.
          ** NOTE TO SPECIFIER ** Delete configuration options not required.
          a.Panel Configuration: XO, OX
          b.Panel Configuration: 1/4 - 1/2 -1/4.
          c.Panel Configuration: 1/3 - 1/3 -1/3.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          d.Width: 18 inches (457 mm) minimum.
          e.Width: 112 inches (2845 mm) maximum.
          f.Width: As indicated on Drawings.
          g.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          h.Height: 36 inches (914 mm) minimum.
          i.Height: 64 inches (1526 mm) maximum.
          j.Height: As indicated on Drawings.
          k.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Non-impact glazing.
          c.Impact rated glazing.
          d.Tint: Clear.
          e.Tint: _____.
          f.Tint: As indicated on Drawings.
          g.Tint: To be selected by Architect.
          h.Coating: Low-E.
          i.Coating: None.
          j.Coating: _____.
          ** NOTE TO SPECIFIER ** Delete frame options not required.
          4.Frame: Fin. Depth: 3-1/4 inches (83 mm).
          5.Frame: Flange. Depth: 3-1/4 inches (83 mm).
          6.Frame: Flush. Depth: 3-1/4 inches (83 mm).
          7.Locking: Double sweep locks.
          8.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Profile: 1 inch (25 mm).
          c.Profile: 2-1/4 inches (57 mm).
          d.Pattern: Standard.
          e.Pattern: Custom, as indicated on Drawings.
          f.Pattern: Custom, to be selected by Architect.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          9.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          10.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: _____.
          d.Color: To be selected by Architect.
          11.Finish: Clear anodized. Finish Warranty: 5 years.
          12.Finish: Applied woodgrain. Finish Warranty: 10 years.
          13.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          14.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          K.Basis of Design: Estate Collection, 238 Series Casement Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          a.Water Resistance: 16.5 psf (0.79 kPa) maximum.
          b.Forced Entry Test per AAMA 1302.5: Passed.
          2.Window Size:
          ** NOTE TO SPECIFIER ** Delete size options not required.
          a.Width: 18 inches (457 mm).
          b.Width: 19-1/8 inches (486 mm).
          c.Width: 20 inches (508 mm).
          d.Width: 24 inches (620 mm).
          e.Width: 26-1/2 inches (673 mm).
          f.Width: 28 inches (711 mm).
          g.Width: 30 inches (762 mm).
          h.Width: 32 inches (823 mm).
          i.Width: 36 inches (914 mm).
          j.Width: 37 inches (940 mm).
          k.Width: 42 inches (1067 mm).
          l.Width: _____.
          m.Width: As indicated on Drawings.
          n.Height: 17 inches (432 mm).
          o.Height: 24 inches (620 mm).
          p.Height: 26 inches (660 mm).
          q.Height: 30 inches (762 mm).
          r.Height: 36 inches (914 mm).
          s.Height: 38-3/8 inches (975 mm).
          t.Height: 42 inches (1067 mm).
          u.Height: 48 inches (1219 mm).
          v.Height: 50-3/8 inches (1280 mm).
          w.Height: 54 inches (1372 mm).
          x.Height: 60 inches (1524 mm).
          y.Height: 63 inches (1600 mm).
          z.Height: 66 inches (1676 mm).
          aa.Height: 72 inches (1829 mm).
          ab.Height: 78 inches (1981 mm).
          ac.Height: 84 inches (2134 mm).
          ad.Height: _____.
          ae.Height: As indicated on Drawings.
          3.Window Features:
          a.Frame: Extruded screen with Super-View screen fiberglass mesh.
          ** NOTE TO SPECIFIER ** Delete glazing bead option not required.
          b.Glazing Beads: Extruded snap-on, contoured ogee profile.
          c.Glazing Beads: Extruded snap-on, contemporary square profile.
          d.Stainless steel assembly screws.
          e.Double continuous rows of weatherstripping, one row of Schlegel Q-Lon and another row of Aptus.
          f.Exterior flange frame, 1/2 inch (13 mm).
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 7/16 inch (11 mm) laminated.
          1)Large Missile Rating, 26-1/2 x 50-5/8 inch Window: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          2)Large Missile Rating, 37 x 63 inch Window: Positive 110 psf (5.27 kPa), negative 120 psf (5.75 kPa).
          3)Large Missile Rating, 37 x 76 inch Window: Positive 56.3 psf (2.7 kPa), negative 56.3 psf (2.7 kPa).
          4)Color: Gray.
          5)Color: Clear.
          6)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          7)Color: Clear with High performance LoE 340; coating on No. 2 surface.
          8)Color: Dark Gray, Turtle Code.
          9)Color: Bronze.
          10)Color: Solexia Green.
          11)Color: White Interlayer; Obscure.
          12)Color: Mist, Pattern 62.
          13)Color: Rain.
          14)Heat Strengthened or Tempered as required.
          b.Type: 1 inch (25 mm) insulated laminated.
          1)Large Missile Rating, 26-1/2 x 50-5/8 inch Window, Annealed Glass: Positive 99.7 psf (4.77 kPa), negative 104.3 psf (4.99 kPa).
          2)Large Missile Rating, 37 x 63 inch Window, Annealed Glass: Positive 60 psf (2.87 kPa), negative 60 psf (2.87 kPa).
          3)Large Missile Rating, 37 x 76 inch Window, Annealed Glass: Positive 56.3 psf (2.7 kPa), negative 56.3 psf (2.7 kPa).
          4)Large Missile Rating, 26-1/2 x 50-5/8 inch Window, Tempered Glass: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          5)Large Missile Rating, 37 x 63 inch Window, Tempered Glass: Positive 110 psf (5.27 kPa), negative 117 psf (5.6 kPa).
          6)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          7)Color: Clear with High performance LoE 270; coating on No. 2 surface.
          8)Color: Clear.
          9)Color: Gray.
          10)Color: Dark Gray, Turtle Code.
          11)Color: Bronze.
          12)Color: Solexia Green.
          13)Color: White Interlayer; Obscure.
          14)Color: Mist, Pattern 62.
          15)Color: Rain.
          16)Heat Strengthened or Tempered as noted.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          5.Finish: Powder Coating per AAMA 2603. Color: White.
          6.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          7.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          8.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          9.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          10.Finish: PVDF Coating per AAMA 2605. Color: _____.
          11.Finish: Clear Anodized: NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          12.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          13.Finish: Aspen Wood Grain. Color: Mahogany Red.
          14.Finish: Aspen Wood Grain. Color: Walnut Brown.
          15.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with sealed, mitered hairline joints and no visible fasteners when vents are closed. Provide grooves in extrusions to receive double weather stripping between vents and frames.
          16.Member Wall Thickness:
          a.Frames: At least 0.080 inch (2.3 mm).
          b.Vents: At least 0.090 inch (2.9 mm).
          17.Frame Depth: At least 2.075 inches (53 mm).
          18.Corner Construction:
          a.At Casement Window Frames and Vents: Assemble with sealed mitered, hairline joint, made rigid by fastening with No. 10 stainless steel screws.
          b.At Frames: 4 stainless steel corner keys and 4 aluminum corner keys.
          c.At Vents: 4 stainless steel corner keys.
          19.Hardware:
          a.Operator: Single arm stainless steel roto operator and nesting crank handle.
          b.Track: Stainless steel operator track.
          c.Hinges: Pair, stainless steel 4 bar concealed hinges.
          d.Lock Bars: Stainless steel, multipoint.
          e.Snubber blocks.
          ** NOTE TO SPECIFIER ** Delete hardware finish options not required.
          f.Hardware Finish: Multi -coat baked enamel: Color: White.
          g.Hardware Finish: Multi -coat baked enamel: Color: Bronze.
          h.Hardware Finish: Multi -coat baked enamel: Color: Silver.
          20.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Keyed Limit opening devices.
          b.Non-Keyed Limit opening devices.
          ** NOTE TO SPECIFIER ** For window sizes 24 inches (610 mm) wide and above.
          c.Hinges with washability feature.
          d.Custodial type locks, for institutional use.
          e.Equal leg frames.
          ** NOTE TO SPECIFIER ** Delete muntins options not required. 3-1/2 inch muntins not available with insulated glass.
          f.Muntins: Extruded double applied, inside and outside raised profile 1-inch (25 mm).
          g.Muntins: Extruded double applied, inside and outside, raised profile 3-1/2 inches (89 mm).
          h.Muntins: Grids inside insulated glass.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          L.Basis of Design: Estate Collection, 238 Series Project Out Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          a.Maximum Water Resistance: 16.5 psf (0.79 kPa).
          b.Forced Entry Test per AAMA 1302.5: Passed.
          2.Window Size:
          ** NOTE TO SPECIFIER ** Delete size options not required.
          a.Width: 18 inches (457 mm).
          b.Width: 19-1/8 inches (486 mm).
          c.Width: 20 inches (508 mm).
          d.Width: 24 inches (620 mm).
          e.Width: 26-1/2 inches (673 mm).
          f.Width: 28 inches (711 mm).
          g.Width: 30 inches (762 mm).
          h.Width: 32 inches (823 mm).
          i.Width: 36 inches (914 mm).
          j.Width: 37 inches (940 mm).
          k.Width: 40 inches (1016 mm).
          l.Width: 42 inches (1067 mm).
          m.Width: 48 inches (1219 mm).
          n.Width: 53-1/8 inches (1349 mm).
          o.Width: 54 inches (1372 mm).
          p.Width: 60 inches (1524 mm).
          q.Width: 66 inches (1676 mm).
          r.Width: 72 inches (1829 mm).
          s.Width: _____.
          t.Width: As indicated on Drawings.
          u.Height: 17 inches (432 mm).
          v.Height: 24 inches (620 mm).
          w.Height: 26 inches (660 mm).
          x.Height: 30 inches (762 mm).
          y.Height: 36 inches (914 mm).
          z.Height: 38-3/8 inches (975 mm).
          aa.Height: 42 inches (1067 mm).
          ab.Height: 48 inches (1219 mm).
          ac.Height: 50-3/8 inches (1280 mm).
          ad.Height: 54 inches (1372 mm).
          ae.Height: 60 inches (1524 mm).
          af.Height: 63 inches (1600 mm).
          ag.Height: 66 inches (1676 mm).
          ah.Height: 72 inches (1829 mm).
          ai.Height: _____.
          aj.Height: As indicated on Drawings.
          3.Window Features:
          a.Frame: Extruded screen with Super-View screen fiberglass mesh.
          ** NOTE TO SPECIFIER ** Delete glazing bead option not required.
          b.Glazing Beads: Extruded snap-on, contoured ogee profile; colonial.
          c.Glazing Beads: Extruded snap-on, contemporary square profile.
          d.Stainless steel assembly screws and corner keys.
          e.Double continuous rows of weatherstripping, one row of Schlegel Q-Lon and another row of Aptus.
          f.Exterior flange frame, 1/2 inch (13 mm).
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 7/16 inch (11 mm) laminated.
          1)Large Missile Rating, 53-1/8 x 26 inch Window, Annealed Glass: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          2)Large Missile Rating, 54 x 24 inch Window, Annealed Glass: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          3)Large Missile Rating, 53-1/8 x 26 inch Window, Heat Strengthened Glass: Positive 110 psf (5.27 kPa), negative 120 psf (5.75 kPa).
          4)Large Missile Rating, 54 x 24 inch Window, Heat Strengthened Glass: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          5)Color: Gray.
          6)Color: Clear.
          7)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          8)Color: Dark Gray, Turtle Code.
          9)Color: Bronze.
          10)Color: Solexia Green.
          11)Color: White Interlayer; Obscure.
          12)Color: Mist, Pattern 62.
          13)Color: Rain.
          14)Heat Strengthened or Tempered as noted.
          b.Type: 3/4 inch (19 mm) insulated laminated.
          1)Large Missile Rating, 53-1/8 x 26 inch Window, Annealed Glass: Positive 101.3 psf (4.85 kPa), negative 120 psf (5.75 kPa).
          2)Large Missile Rating, 54 x 24 inch Window, Annealed Glass: Positive 107.9 psf (5.17 kPa), negative 107.9 psf (5.17 kPa).
          3)Large Missile Rating, 53-1/8 x 26 inch Window, Heat Strengthened Glass: Positive 110 psf (5.27 kPa), negative 120 psf (5.75 kPa).
          4)Large Missile Rating, 54 x 24 inch Window, Heat Strengthened Glass: Positive 110 psf (5.27 kPa), negative 195 psf (9.34 kPa).
          5)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          6)Color: Clear with High performance LoE 270; coating on No. 2 surface.
          7)Color: Clear.
          8)Color: Gray.
          9)Color: Dark Gray, Turtle Code.
          10)Color: Bronze.
          11)Color: Solexia Green.
          12)Color: White Interlayer; Obscure.
          13)Color: Mist, Pattern 62.
          14)Color: Rain.
          15)Heat Strengthened or Tempered as noted.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          5.Finish: Powder Coating per AAMA 2603. Color: White.
          6.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          7.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          8.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          9.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          10.Finish: PVDF Coating per AAMA 2605. Color: _____.
          11.Finish: Clear Anodized: NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          12.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          13.Finish: Aspen Wood Grain. Color: Mahogany Red.
          14.Finish: Aspen Wood Grain. Color: Walnut Brown.
          15.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with sealed, mitered hairline joints and no visible fasteners when vents are closed. Provide grooves in extrusions to receive double weather stripping between vents and frames.
          16.Member Wall Thickness:
          a.Frames: At least 0.080 inch (2.3 mm).
          b.Vents: At least 0.090 inch (2.9 mm).
          17.Frame Depth: At least 2.075 inches (53 mm).
          18.Corner Construction:
          a.At Project-out Window Frames and Vents: Assemble with sealed mitered, hairline joint, made rigid by fastening with No. 10 stainless steel screws.
          b.At Frames: 4 stainless steel corner keys and 4 aluminum corner keys.
          c.At Vents: 4 stainless steel corner keys.
          19.Hardware:
          a.Operator: Dual arm stainless steel roto operator and crank handle.
          b.Track: Stainless steel operator track.
          c.Hinges: Pair, stainless steel 4 bar concealed hinges.
          d.Locks: Pair of Cam locks.
          e.Lock Keepers: Pair of stainless steel lock keepers.
          f.Snubber blocks.
          ** NOTE TO SPECIFIER ** Delete hardware finish options not required.
          g.Hardware Finish: Multi-coat baked enamel. Color: White.
          h.Hardware Finish: Multi-coat baked enamel. Color: Bronze.
          i.Hardware Finish: Multi-coat baked enamel. Color: Silver.
          20.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Keyed Limit opening devices.
          b.Non-keyed Limit opening devices.
          c.Custodial type locks. For Institutional use.
          d.Equal leg frames.
          e.Collapsible cranks.
          ** NOTE TO SPECIFIER ** Delete muntins options not required. 3-1/2 inch muntins not available with insulated glass.
          f.Muntins: Extruded double applied, inside and outside, raised profile 1 inch (25 mm).
          g.Muntins: Extruded double applied, inside and outside, raised profile 3-1/2 inches (89 mm).
          h.Muntins: Grids inside insulated glass.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          M.Basis of Design: Estate Collection, 238 Series Fixed and Designer Fixed Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          a.Maximum Water Resistance: 16.5 psf (0.79 kPa).
          b.Forced Entry Test per AAMA 1302.5: Passed.
          2.Window Configuration:
          ** NOTE TO SPECIFIER ** Delete shape options not required. All configurations listed below except rectangular are considered designer configurations.
          a.Shape: Rectangular.
          b.Shape: Half Circle.
          c.Shape: Full Circle.
          d.Shape: Arch Top/Eyebrow.
          e.Shape: Octagon.
          f.Shape: Hexagon.
          g.Shape: Chord.
          h.Shape: Tombstone.
          i.Shape: Trapezoid.
          j.Shape: Pentagon.
          k.Shape: Gothic Pentagon.
          l.Shape: Oval.
          m.Shape: Standard Colonial.
          n.Shape: Custom Colonial as indicated on Drawings.
          o.Shape: _____.
          ** NOTE TO SPECIFIER ** Minimum width is 14 inches, maximum width is 78 inches. Delete options not required.
          p.Width: 14 inches (356 mm).
          q.Width: 78 inches (1981 mm).
          r.Width: _____.
          s.Width: As indicated on Drawings.
          ** NOTE TO SPECIFIER ** Minimum height is 14 inches, maximum height is 130 inches. Delete options not required.
          t.Height: 14 inches (356 mm).
          u.Height: 130 inches (3302 mm).
          v.Height: _____.
          w.Height: As indicated on Drawings.
          3.Window Features:
          ** NOTE TO SPECIFIER ** Delete configuration unit type option not required.
          a.Rectangular Window Configuration Units:
          1)Glazing Beads: Extruded snap-on, contoured ogee profile; Colonial.
          2)Corner keys.
          b.Designer Window Configuration Units:
          1)Glazing Beads: Extruded snap-on, square profile.
          2)Welded corners.
          c.Stainless steel assembly screws.
          d.Double continuous rows of weatherstripping, one row of Schlegel Q-Lon and another row of Aptus.
          e.Exterior flange frame, 1/2 inch (13 mm).
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 7/16 inch (11 mm) laminated.
          1)Large Missile Rating, 26-1/2 x 50-5/8 inch Window, minimum: Positive 110 psf (5.27 kPa), negative 147.2 psf (7.05 kPa).
          2)Large Missile Rating, 37 x 63 inch Window, minimum: Positive 102.1 psf (4.89 kPa), negative 110.2 psf (5.28 kPa).
          3)Large Missile Rating, 48 x 72 inch Window, minimum: Positive 83.9 psf (4.02 kPa), negative 83.9 psf (4.02 kPa).
          4)Large Missile Rating, 54 x 120 inch Window: Positive 50 psf (2.39 kPa), negative 50 psf (2.39 kPa).
          5)Color: Gray.
          6)Color: Clear.
          7)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          8)Color: Clear with High performance LoE 270; coating on No. 2 surface.
          9)Color: Dark Gray, Turtle Code.
          10)Color: Bronze.
          11)Color: Solexia Green.
          12)Color: White Interlayer; Obscure.
          13)Color: Mist, Pattern 62.
          14)Color: Rain.
          15)Heat Strengthened or Tempered as noted.
          b.Type: 3/4 inch (19 mm) insulated laminated.
          1)Large Missile Rating, 26-1/2 x 50-5/8 inch Window, minimum: Positive 110 psf (5.27 kPa), negative 133 psf (6.37 kPa).
          2)Large Missile Rating, 37 x 63 inch Window, minimum: Positive 72.9 psf (3.49 kPa), negative 72.9 psf (3.49 kPa).
          3)Large Missile Rating, 48 x 72 inch Window, minimum: Positive 52.9 psf (2.53 kPa), negative 52.9 psf (2.53 kPa).
          4)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          5)Color: Clear High Performance with LoE 270; coating on No. 2 surface.
          6)Color: Clear.
          7)Color: Gray.
          8)Color: Dark Gray, Turtle Code.
          9)Color: Bronze.
          10)Color: Solexia Green.
          11)Color: White Interlayer; Obscure.
          12)Color: Mist, Pattern 62.
          13)Color: Rain.
          14)Heat Strengthened or Tempered as noted.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          5.Finish: Powder Coating per AAMA 2603. Color: White.
          6.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          7.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          8.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          9.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          10.Finish: PVDF Coating per AAMA 2605. Color: _____.
          11.Finish: Clear Anodized: NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          12.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          13.Finish: Aspen Wood Grain. Color: Mahogany Red.
          14.Finish: Aspen Wood Grain. Color: Walnut Brown.
          15.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with sealed mitered, hairline joints.
          16.Corner Construction:
          a.Rectangular Fixed Window Frames:
          1)Assemble with sealed, mitered, hairline joints, made rigid by fastening with No. 10 stainless steel screws.
          2)Corner Keys: 4 stainless steel and 4 aluminum.
          b.Designer Fixed Window Frames: Welded corners with sealed hairline joints.
          17.Fixed Window Frame Construction: Use the same vent and frame extrusions as are used in casement and project-out Series 238 windows, but screw vent extrusion at interior using No. 10 x 1 inch (25 mm) stainless steel sheet metal screws around entire window, spaced as required by NOA.
          a.Apply plastic caps matching color or finish to screw heads.
          ** NOTE TO SPECIFIER ** Delete options not required.
          18.Included Options:
          ** NOTE TO SPECIFIER ** Decorative screw covers are only available on rectangular fixed windows.
          a.Decorative screw covers.
          ** NOTE TO SPECIFIER ** Square glazing beads are optional for rectangular fixed/picture windows.
          b.Glazing Beads: Square.
          ** NOTE TO SPECIFIER ** Equal leg frames are optional for rectangular fixed/picture windows.
          c.Equal leg frames.
          ** NOTE TO SPECIFIER ** Delete muntins options not required. 3-1/2 inch muntins not available with insulated glass.
          d.Muntins: Extruded double applied, inside and outside, raised profile 1 inch (25 mm).
          e.Muntins: Extruded double applied, inside and outside, raised profile 3-1/2 inches (89 mm) muntins.
          f.Muntins: Grids inside insulated glass.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          N.Basis of Design: Estate Collection, 360 Series Single Hung Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          ** NOTE TO SPECIFIER ** Delete water resistance option not required.
          a.Water Resistance, without Waterbar Adapter: 12 psf (0.57 kPa) maximum.
          b.Water Resistance, with Waterbar Adapter: 15 psf (0.72 kPa) maximum.
          c.Forced Entry Test per AAMA 1302.5: Passed.
          2.Window Size:
          ** NOTE TO SPECIFIER ** Delete size options not required.
          a.Width: 18 inches (457 mm).
          b.Width: 19-1/8 inches (486 mm).
          c.Width: 24 inches (620 mm).
          d.Width: 26-1/2 inches (673 mm).
          e.Width: 30 inches (762 mm).
          f.Width: 32 inches (823 mm).
          g.Width: 36 inches (914 mm).
          h.Width: 37 inches (940 mm).
          i.Width: 42 inches (1067 mm).
          j.Width: 48 inches (1219 mm).
          k.Width: 53-1/8 inches (1349 mm).
          l.Width: 54 inches (1372 mm).
          m.Width: _____.
          n.Width: As indicated on Drawings.
          o.Height: 24 inches (620 mm).
          p.Height: 26 inches (660 mm).
          q.Height: 36 inches (914 mm).
          r.Height: 38-3/8 inches (975 mm).
          s.Height: 48 inches (1219 mm).
          t.Height: 50-3/8 inches (1280 mm).
          u.Height: 60 inches (1524 mm).
          v.Height: 63 inches (1600 mm).
          w.Height: 72 inches (1829 mm).
          x.Height: 76 inches (1930 mm).
          y.Height: 84 inches (2134 mm).
          z.Height: 96 inches (2438 mm).
          aa.Height: 120 inches (3048 mm).
          ab.Height: _____.
          ac.Height: As indicated on Drawings.
          3.Window Features:
          a.Frame: Extruded screen with Super-View screen fiberglass mesh.
          b.Glazing Beads: Extruded aluminum snap-on:
          c.Stainless steel assembly screws.
          d.Double and triple weatherstripping. Wool pile with center soft fin, gray, minimum two rows at all moving connections.
          e.Balance cover and screen pocket covers.
          f.Captured bottom rail design with reservoir sill.
          g.Exterior flange frame, 1/2 inch (13 mm).
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 5/16 inch (7.9 mm) laminated.
          1)Large Missile Rating, 37 x 63 inch Window, Annealed Glass: Positive 110 psf (5.27 kPa), negative 154.9 psf (7.42 kPa).
          2)Large Missile Rating, 54 x 96 inch Window, Annealed Glass: Positive 68.9 psf (3.30 kPa), negative 68.9 psf (3.30 kPa).
          3)Large Missile Rating, 42 x 120 inch Window, Annealed Glass: Positive 66.4 psf (3.18 kPa), negative 66.4 psf (3.18 kPa).
          4)Large Missile Rating, 37 x 63 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 210 psf (10.1 kPa).
          5)Large Missile Rating, 54 x 96 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 120 psf (5.75 kPa).
          6)Large Missile Rating, 42 x 120 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 120 psf (5.75 kPa).
          7)Color: Gray.
          8)Color: Clear.
          9)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          10)Color: Dark Gray, Turtle Code.
          11)Color: Bronze.
          12)Color: Solexia Green.
          13)Color: White Interlayer; Obscure.
          14)Color: Mist, Pattern 62.
          15)Color: Rain.
          b.Type: 7/16 inch (11 mm) laminated.
          1)Color: Clear.
          2)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          3)Color: Gray.
          4)Color: Bronze.
          5)Color: Solexia Green.
          6)Color: White Interlayer; Obscure.
          7)Color: Mist, Pattern 62.
          8)Color: Rain.
          c.Type: 3/4 inch (19 mm) insulated laminated.
          1)Large Missile Rating, 37 x 63 inch Window, Annealed Glass: Positive 110 psf (5.27 kPa), negative 177.6 psf (8.50 kPa).
          2)Large Missile Rating, 54 x 96 inch Window, Annealed Glass: Positive 73.2 psf (3.50 kPa), negative 73.2 psf (3.50 kPa).
          3)Large Missile Rating, 42 x 120 inch Window, Annealed Glass: Positive 70.6 psf (3.38 kPa), negative 70.6 psf (3.38 kPa).
          4)Large Missile Rating, 37 x 63 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 210 psf (10.1 kPa).
          5)Large Missile Rating, 54 x 96 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 120 psf (5.75 kPa).
          6)Large Missile Rating, 42 x 120 inch Window, Heat Strengthened Glass: Positive 100 psf (4.79 kPa), negative 120 psf (5.75 kPa).
          7)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          8)Color: Clear with High performance LoE 270; coating on No. 2 surface.
          9)Color: Clear.
          10)Color: Gray.
          11)Color: Dark Gray, Turtle Code.
          12)Color: Bronze.
          13)Color: Solexia Green.
          14)Color: White Interlayer; Obscure.
          15)Color: Mist, Pattern 62.
          16)Color: Rain.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          5.Finish: Powder Coating per AAMA 2603. Color: White.
          6.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          7.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          8.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          9.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          10.Finish: PVDF Coating per AAMA 2605. Color: _____.
          11.Finish: Clear Anodized: NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          12.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          13.Finish: Aspen Wood Grain. Color: Mahogany Red.
          14.Finish: Aspen Wood Grain. Color: Walnut Brown.
          15.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with hairline joints and no visible fasteners when sash is closed.
          16.Frame Construction: Provide enclosed sloped sill frame member. All sash/vent rails shall be tubular. Top fixed glass to be installed into a separate fixed sash, rather than to be glazed directly on the frame.
          17.Hardware: Factory applied, and field adjusted.
          ** NOTE TO SPECIFIER ** Windows wider than 28 inches will have two locks instead of one. Delete option not required.
          a.CGI egress self-closing, sill mounted locks.
          b.Lifts/Pulls: Spring loaded.
          c.Balances: Attached to an independent CGI patented carrier with nylon guides for smooth operation and sash removal feature without disengaging the balance.
          ** NOTE TO SPECIFIER ** Delete balance type option not required.
          1)Balance Type: Concealed Block and Tackle balances.
          2)Balance Type: Spiral Balances.
          18.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Small missile impact resistance.
          b.Limit opening devices.
          c.15 PSF Waterbar adaptor.
          d.Clipless mullions.
          e.Oriel/Proview configuration; uneven size vent available.
          ** NOTE TO SPECIFIER ** Option below is only available with 5/16 inch glass. Delete if not required.
          f.Meeting rail mounted Sweep lock, keeper, and lift/pull.
          ** NOTE TO SPECIFIER ** Delete muntins option not required. The first option below is not available with insulated glass.
          g.Muntins: Extruded double applied, inside and outside, raised low profile 1 inch (25 mm).
          h.Muntins Grids inside insulated glass.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          O.Basis of Design: Estate Collection, 375 Series Horizontal Rolling Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          ** NOTE TO SPECIFIER ** Delete water resistance option not required.
          a.Water Resistance, without Waterbar Adapter: 12 psf (0.57 kPa) maximum.
          b.Water Resistance, with Waterbar Adapter: 18 psf (0. 86 kPa) maximum.
          c.Forced Entry Test per AAMA 1302.5: Passed.
          ** NOTE TO SPECIFIER ** Delete window and panel configuration, and width options not required.
          2.Window Configuration: 2 Panels:
          a.Panel Configuration: XO, equal panels.
          b.Panel Configuration: XO, unequal panels.
          c.Panel Configuration: OX, equal panels.
          d.Panel Configuration: OX, unequal panels.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          e.Width: 24 inches (620 mm).
          f.Width: 26-1/2 inches (673 mm).
          g.Width: 36 inches (914 mm).
          h.Width: 37 inches (940 mm).
          i.Width: 48 inches (1219 mm).
          j.Width: 53-1/8 inches (1349 mm).
          k.Width: 60 inches (1524 mm).
          l.Width: 72 inches (1829 mm).
          m.Width: 74 inches (1880 mm).
          n.Width: 106-1/4 inches (2699 mm).
          o.Width: _____.
          p.Width: As indicated on Drawings.
          3.Window Configuration: 3 Panels:
          a.Panel Configuration: XOX, equal panels.
          b.Panel Configuration: XOX, unequal panels.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          c.Width: 36 inches (914 mm).
          d.Width: 53-1/8 inches (1349 mm).
          e.Width: 54 inches (1372 mm).
          f.Width: 72 inches (1829 mm).
          g.Width: 74 inches (1880 mm).
          h.Width: 90 inches (2286 mm).
          i.Width: 106-1/4 inches (2699 mm).
          j.Width: 108 inches (2743 mm).
          k.Width: 111 inches (2819 mm).
          l.Width: 159-3/8 inches (4048 mm).
          m.Width: _____.
          n.Width: As indicated on Drawings.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          4.Height: 24 inches (620 mm).
          5.Height: 26 inches (660 mm).
          6.Height: 36 inches (914 mm).
          7.Height: 38-3/8 inches (975 mm).
          8.Height: 48 inches (1219 mm).
          9.Height: 50-3/8 inches (1280 mm).
          10.Height: 60 inches (1524 mm).
          11.Height: 63 inches (1600 mm).
          12.Height: 72 inches (1829 mm).
          13.Height: 76 inches (1930 mm).
          14.Height: _____.
          15.Height: As indicated on Drawings.
          16.Window Features:
          a.Frame: Extruded screen with Super-View screen fiberglass mesh.
          b.Glazing Beads: Extruded aluminum snap-on.
          c.Stainless steel assembly screws.
          d.Double and triple weatherstripping. Wool pile with center soft fin, gray, minimum two rows at all moving connections.
          e.Exterior flange frame, 1/2 inch (13 mm).
          17.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 5/16 inch (7.9 mm) laminated.
          1)Large Missile Rating, 2 Equal Panels, Annealed Glass: Positive 98.5 psf (4.72 kPa), negative 98.5 psf (4.72 kPa).
          2)Large Missile Rating, 3 Equal Panels, Annealed Glass: Positive 50 psf (2.39 kPa), negative 50 psf (2.39 kPa).
          3)Large Missile Rating, 2 Equal Panels, Heat Strengthened Glass: Positive 120 psf (5.75 kPa), negative 147.7 psf (7.07 kPa).
          4)Large Missile Rating, 3 Equal Panels, Heat Strengthened Glass: Positive 75 psf (3.59 kPa), negative 75 psf (3.59 kPa).
          5)Color: Gray.
          6)Color: Clear.
          7)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          8)Color: Dark Gray, Turtle Code.
          9)Color: Bronze.
          10)Color: Solexia Green.
          11)Color: White Interlayer; Obscure.
          12)Color: Mist, Pattern 62.
          13)Color: Rain.
          b.Type: 7/16 inch (11 mm) laminated.
          1)Color: Clear.
          2)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          3)Color: Gray.
          4)Color: Bronze.
          5)Color: Solexia Green.
          6)Color: White Interlayer; Obscure.
          7)Color: Mist, Pattern 62.
          8)Color: Rain.
          c.Type: 13/16 inch (21 mm) insulated laminated.
          1)Large Missile Rating, 2 Equal Panels, Annealed Glass: Positive 98.5 psf (4.72 kPa), negative 98.5 psf (4.72 kPa).
          2)Large Missile Rating, 3 Equal Panels, Annealed Glass: Positive 100 psf (4.79 kPa), negative 100 psf (4.79 kPa).
          3)Large Missile Rating, 2 Equal Panels, Heat Strengthened Glass: Positive 120 psf (5.75 kPa), negative 147.7 psf (7.07 kPa).
          4)Large Missile Rating, 3 Equal Panels, Heat Strengthened Glass: Positive 75 psf (3.59 kPa), negative 75 psf (3.59 kPa).
          5)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          6)Color: Clear High performance with LoE 270; coating on No. 2 surface.
          7)Color: Clear.
          8)Color: Gray.
          9)Color: Dark Gray, Turtle Code.
          10)Color: Bronze.
          11)Color: Solexia Green.
          12)Color: White Interlayer; Obscure.
          13)Color: Mist, Pattern 62.
          14)Color: Rain.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          18.Finish: Powder Coating per AAMA 2603. Color: White.
          19.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          20.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          21.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          22.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          23.Finish: PVDF Coating per AAMA 2605. Color: _____.
          24.Finish: Clear Anodized, NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          25.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          26.Finish: Aspen Wood Grain. Color: Mahogany Red.
          27.Finish: Aspen Wood Grain. Color: Walnut Brown.
          28.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with sealed and hairline joints and no visible fasteners when sash is closed.
          29.Corner Construction: Assemble with sealed hairline joints, made rigid by fasteners with 3 No. 10 stainless steel screws per corner.
          30.Frame Construction: All sash/vent rails shall be tubular. Sash/vent to engage the jamb 0.50 inches (12.7 mm). Fixed panels to be installed into a separate fixed sash, rather than to be glazed directly on the frame.
          31.Hardware: Factory applied, and field adjusted.
          a.CGI self-closing heavy duty cast 1-7/8 inch x 4-1/8 inch (47.6 mm x 105 mm) spring loaded egress lock; one per operable panel.
          b.Patented quad roller system consisting of a 1-1/2 inches x 3 inches (38 mm x 76 mm) housing each containing four 3/4 inch (19 mm) diameter nylon wheels with stainless steel raceways on stainless steel axels. Each operable panel to have 2 housings; eight wheels. Wheels to run on PVC track inserts.
          32.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Small missile impact resistance.
          b.Concealed aluminum reinforcing.
          c.Clipless mullions.
          d.Limit opening devices.
          e.18 PSF Waterbar adaptor.
          f.Unequal size vents.
          ** NOTE TO SPECIFIER ** Delete muntin option not required. The first option below is not available with insulated glass. Delete if not required.
          g.Muntins: Extruded double applied, inside and outside, raised low profile 1 inch (25 mm).
          h.Muntins: Grids inside insulated glass.
          ** NOTE TO SPECIFIER ** Delete paragraph if not required.
 
          P.Basis of Design: Estate Collection, 410 Series Fixed Windows; as manufactured by CGI Windows and Doors.
          1.Performance Requirements:
          a.Maximum Water Resistance: 20 psf (0.96 kPa).
          b.Forced Entry Test per AAMA 1302.5: Passed.
          2.Window Size:
          ** NOTE TO SPECIFIER ** Minimum width is 14 inches, maximum width is 120 inches, maximum area is 60 square feet. Delete options not required.
          a.Width: 14 inches (356 mm).
          b.Width: 72 inches (1829 mm).
          c.Width: 120 inches (3048 mm).
          d.Width: _____.
          e.Width: As indicated on Drawings.
          ** NOTE TO SPECIFIER ** Minimum height is 14 inches, maximum height is 120 inches, maximum area is 60 square feet. Delete options not required.
          f.Height: 14 inches (356 mm).
          g.Height: 72 inches (1829 mm).
          h.Height: 120 inches (3048 mm).
          i.Height: _____.
          j.Height: As indicated on Drawings.
          3.Window Features:
          a.Direct set frame design.
          b.Stainless steel assembly screws.
          c.Removable interior glazing bead and cover.
          d.Concealed installation fasteners.
          e.Exterior flange frame, 1/2 inch (13 mm).
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete type and glazing options not required.
          a.Type: 7/16 inch (11 mm) laminated.
          1)Large Missile Rating, 63 x 48 inch Window, Annealed Glass: Positive 91.1 psf (4.36 kPa), negative 91.1 psf (4.36 kPa).
          2)Large Missile Rating, 60 x 96 inch Window, Annealed Glass: Positive 51.8 psf (2.48 kPa), negative 51.8 psf (2.48 kPa).
          3)Large Missile Rating, 72 x 120 inch Window, Heat Strengthened Glass: Positive 75 psf (3.59 kPa), negative 75 psf (3.59 kPa).
          4)Large Missile Rating, 63 x 48 inch Window, Heat Strengthened Glass: Positive 133 psf (6.37 kPa), negative 150 psf (7.18 kPa).
          5)Large Missile Rating, 60 x 96 inch Window, Heat Strengthened Glass: Positive 103.6 psf (4.96 kPa), negative 103.6 psf (4.96 kPa).
          6)Color: Gray.
          7)Color: Clear.
          8)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          9)Color: Dark Gray, Turtle Code.
          10)Color: Bronze.
          11)Color: Solexia Green.
          12)Color: White Interlayer.
          13)Color: Mist, Pattern 62; Obscure.
          14)Color: Rain.
          b.Type: 1.2 inch (30 mm) insulated laminated.
          1)Large Missile Rating, 63 x 48 inch Window, Annealed Glass: Positive 88.4 psf (4.23 kPa), negative 88.4 psf (4.23 kPa).
          2)Large Missile Rating, 60 x 96 inch Window, Annealed Glass: Positive 50.3 psf (2.41 kPa), negative 50.3 psf (2.41 kPa).
          3)Large Missile Rating, 72 x 120 inch Window, Heat Strengthened Glass: Positive 75 psf (3.59 kPa), negative 75 psf (3.59 kPa).
          4)Large Missile Rating, 63 x 48 inch Window, Heat Strengthened Glass: Positive 133 psf (6.37 kPa), negative 150 psf (7.18 kPa).
          5)Large Missile Rating, 60 x 96 inch Window, Heat Strengthened Glass: Positive 106.2 psf (5.08 kPa), negative Positive 106.2 psf (5.08 kPa).
          6)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          7)Color: Clear with High performance LoE 270; coating on No. 2 surface.
          8)Color: Gray.
          9)Color: Clear.
          10)Color: Dark Gray, Turtle Code.
          11)Color: Bronze.
          12)Color: Solexia Green.
          13)Color: White Interlayer; Obscure.
          14)Color: Mist, Pattern 62.
          15)Color: Rain.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          5.Finish: Powder Coating per AAMA 2603. Color: White.
          6.Finish: Powder Coating per AAMA 2603. Color: Bronze.
          7.Finish: PVDF Coating per AAMA 2605. Color: Bone White.
          8.Finish: PVDF Coating per AAMA 2605. Color: Bronze.
          9.Finish: PVDF Coating per AAMA 2605. Color: Custom color to be selected by Architect.
          10.Finish: PVDF Coating per AAMA 2605. Color: _____.
          11.Finish: Clear Anodized, NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          12.Finish: Aspen Wood Grain. Color: Hazelnut Brown.
          13.Finish: Aspen Wood Grain. Color: Mahogany Red.
          14.Finish: Aspen Wood Grain. Color: Walnut Brown.
          15.Construction: Heavy extruded aluminum-alloy sections, precision cut and assembled with sealed, hairline joints. System is inside glazed.
          16.Corner Construction: Assemble with sealed, hairline joints, made rigid by fastening with No. 12 stainless steel screws.
          17.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Flat muntins.
          b.Equal leg frames.
          c.Clipless mullion.
          d.Small missile impact resistance.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.3ALUMINUM DOORS
          ** NOTE TO SPECIFIER ** The 9050 terrace door offers an appealing interior frame and panel aesthetics with a secure view of the beautiful outdoors. Our tested and certified single and double swing terrace door can accommodate large panel sizes and includes a multi-point locking system for increased security and insulation. The design and precise engineering can be paired with any of WinDoor's thermally broken family of products. Available with high impact and non-impact resistance certifications. Delete if not required.
 
          A.Basis of Design: 9050 Series Thermally Broken Aluminum Terrace Door; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Standards Compliance: Meets Miami Dade and AAMA protocols.
          ** NOTE TO SPECIFIER ** Delete design pressure option not required.
          b.Design Pressure, Single Door: Positive 100 psf (4.79 kPa) and negative 120 psf (5.75 kPa).
          c.Design Pressure, Twin Door: Positive 80 psf (3.83 kPa) and negative 90 psf (4.31 kPa).
          d.Sound Transmission Class (STC): 43.
          ** NOTE TO SPECIFIER ** Delete configuration option not required.
          2.Configuration: Single Door.
          ** NOTE TO SPECIFIER ** Delete swing and sill options not required.
          a.Swing: In-swing.
          1)Water Resistance: 15 psf (0.72 kPa).
          b.Swing: Out-swing.
          1)Water Resistance: 15 psf (0.72 kPa).
          ** NOTE TO SPECIFIER ** Delete width options not required.
          c.Width: 28 inches (711 mm) minimum.
          d.Width: 46 inches (1168 mm) maximum.
          e.Width: As indicated on Drawings.
          f.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          g.Height: 72 inches (1829 mm) minimum.
          h.Height: 128 inches (3251 mm) maximum.
          i.Height: As indicated on Drawings.
          j.Height: _____.
          3.Configuration: Twin Door.
          ** NOTE TO SPECIFIER ** Delete swing and sill options not required.
          a.Swing: In-swing.
          b.Swing: Out-swing.
          c.Water Resistance, Standard Sill: 12 psf (0.57 kPa).
          ** NOTE TO SPECIFIER ** Delete width options not required.
          d.Width: 54 inches (1372 mm) minimum.
          e.Width: 84.5 inches (2146 mm) maximum.
          f.Width: As indicated on Drawings.
          g.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          h.Height: 72 inches (1829 mm) minimum.
          i.Height: 128 inches (3251 mm) maximum.
          j.Height: As indicated on Drawings.
          k.Height: _____.
          4.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Insulated glazing.
          b.Single glazed.
          c.Non-impact glazing.
          d.Impact rated glazing.
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          5.Frame: Flush.
          ** NOTE TO SPECIFIER ** Delete sill option not required.
          6.Sill: Standard.
          7.Sill: Low profile.
          ** NOTE TO SPECIFIER ** Delete bottom rail options not required.
          8.Bottom Rail: 5-1/8 inches (130 mm).
          9.Bottom Rail: 8-3/4 inches (222 mm).
          10.Bottom Rail: Classic panel.
          11.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm), flat.
          d.Profile: 1 inch (25 mm), contoured.
          e.Profile: 2 inches (51 mm), flat.
          f.Profile: 2 inches (51 mm), contoured.
          g.Profile: 2-3/4 inches (70 mm), flat.
          h.Profile: 2-3/4 inches (70 mm), contoured.
          i.Profile: 3-1/2 inches (89 mm), applied midrail.
          j.Pattern: Standard.
          k.Pattern: Custom, as indicated on Drawings.
          l.Pattern: Custom, to be selected by Architect.
          12.Handles:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Style: Verona, M151.
          b.Style: Rodos, M1603.
          c.Style: Munchen, M112PL.
          d.Style: Toronto, M1020.
          e.Style: New Orleans, M1610.
          f.Backplate: Contemporary, M216N.
          g.Backplate: Traditional, M374N.
          h.Finish: Brushed Chrome.
          i.Finish: Antique Nickel.
          j.Finish: Polished Chrome.
          k.Finish: Satin Nickel.
          l.Finish: Resista Brass.
          m.Finish: Matte Black.
          n.Finish: Pure White.
          o.Finish: Rustic Umber.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          13.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color, Custom: _____.
          d.Color, Custom: To be selected by Architect.
          14.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color, Custom: _____.
          d.Color, Custom: To be selected by Architect.
          15.Finish: Clear anodized. Finish Warranty: 5 years.
          16.Finish: Applied woodgrain. Finish Warranty: 10 years.
          17.Finish: Factory painted, two-tone. Finish Warranty: 10 years.
          a.Interior Color: _____.
          b.Interior Color: To be selected by Architect.
          c.Exterior Color: _____.
          d.Exterior Color: To be selected by Architect.
          18.Finish: Two-tone. Finish Warranty: 5 years.
          a.Interior Finish: Factory Painted:
          1)Color: _____.
          2)Color: To be selected by Architect.
          b.Exterior Finish: Clear anodized.
          ** NOTE TO SPECIFIER ** Our engineers created this pivot door to be remarkable safe and flexible. Designed to make an architectural statement. Delete if not required.
 
          B.Basis of Design: PV9998A Series Aluminum Pivot Door; as manufactured by WinDoor.
          1.Performance and Design Requirements:
          a.Design Pressure: Positive 60 psf (2.87 kPa) and negative 75 psf (3.59 kPa).
          2.Configuration: Pivot Door.
          ** NOTE TO SPECIFIER ** Delete width options not required.
          a.Width: 80 inches (2032 mm) maximum.
          b.Width: As indicated on Drawings.
          c.Width: _____.
          ** NOTE TO SPECIFIER ** Delete height options not required.
          d.Height: 144 inches (3658 mm) height.
          e.Height: As indicated on Drawings.
          f.Height: _____.
          3.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing options not required.
          a.Laminated glazing, 7/16 inch (11 mm) thick.
          b.Laminated insulated glazing, 1 inch (25 mm) thick.
          c.Tempered.
          d.Heat strengthened
          e.Tint: Clear.
          f.Tint: _____.
          g.Tint: As indicated on Drawings.
          h.Tint: To be selected by Architect.
          i.Coating: Low-E.
          j.Coating: None.
          k.Coating: _____.
          4.Frame Depth: 5 inches (127 mm).
          5.Sill: Standard.
          6.Bottom Rail: 5-1/2 inches (140 mm).
          7.Muntins:
          ** NOTE TO SPECIFIER ** Delete muntin options not required.
          a.Applied on both exposed surfaces of glass and within airspace.
          b.Applied on both exposed surfaces of glass.
          c.Profile: 1 inch (25 mm), flat.
          d.Profile: 1 inch (25 mm), contoured.
          e.Profile: 2 inches (51 mm), flat.
          f.Profile: 2 inches (51 mm), contoured.
          g.Profile: 2-3/4 inches (70 mm), flat.
          h.Profile: 2-3/4 inches (70 mm), contoured.
          i.Profile: 3-1/2 inches (89 mm), applied midrail.
          8.Hardware:
          a.Pivot Hardware: Fritz Juergens.
          b.Multi-point lock, latch, and deadbolt system.
          ** NOTE TO SPECIFIER ** Delete hardware and finish options not required.
          c.Built-in closer.
          d.Concealed anchors.
          e.Finish: White.
          f.Finish: Nickel.
          g.Finish: Black.
          h.Finish: Stainless steel.
          9.Weatherstripping: Q-Lon type foam seal, fin seal, and bulb seal.
          ** NOTE TO SPECIFIER ** Delete finish and color options not required.
          10.Finish: Factory painted. Finish Warranty: 3 years.
          a.Color: White.
          b.Color: Bronze.
          c.Color, Custom: _____.
          d.Color, Custom: To be selected by Architect.
          11.Finish: Factory painted. Finish Warranty: 10 years.
          a.Color: Hatteras White.
          b.Color: Bermuda Bronze.
          c.Color: Caribbean Cream.
          d.Color: Costa Latte.
          e.Color: Boca Tone.
          f.Color, Custom: _____.
          g.Color, Custom: To be selected by Architect.
          12.Finish: Clear anodized. Finish Warranty: 5 years.
          ** NOTE TO SPECIFIER ** Delete basis of design paragraph if not required.
 
          C.Basis of Design: Estate Collection, 450 Series French Doors, Sidelites and Transoms; as manufactured by CGI Windows and Doors.
          1.Standards Compliance:
          a.Structural Test: ASTM E 330.
          b.Water Infiltration Resistance: ASTM E 547/E 331 and FBC TAS 202.
          c.Air Infiltration resistance: ASTM E 283.
          d.Windborne Debris Impact Resistance: Pass large missile impact test, pass cyclic pressure test following FBC TAS 203.
          e.Florida HVHZ rated doors.
          f.Glazing performance tested in accordance with NFRC standards.
          2.Performance Requirements:
          ** NOTE TO SPECIFIER ** Delete sill options not required.
          a.Water Resistance, Out-Swing Sill: 15 psf (0.72 kPa) maximum.
          b.Water Resistance, In-Swing Sill: 7.5 psf (0.36 kPa) maximum.
          c.Saddle Threshold: ADA compliant. Not rated for water resistance.
          d.Forced Entry Test per AAMA 1302.5: Passed.
          3.Door Design:
          ** NOTE TO SPECIFIER ** Delete swing direction options not required.
          a.Swing Direction: As indicated on Drawings.
          b.Swing Direction: Out-swing configuration.
          c.Swing Direction: In-swing configuration.
          ** NOTE TO SPECIFIER ** Custom sizes are available. Delete configuration and size options not required.
          d.Door Configuration: As indicated on Drawings.
          1)Size: As indicated on Drawings.
          2)Size: _____.
          e.Door Configuration: Single swing door.
          1)Width: 26-9/16 inches (674 mm).
          2)Width: 32-9/16 inches (827 mm).
          3)Width: 34-9/16 inches (878 mm).
          4)Width: 38-9/16 inches (979 mm).
          5)Width: _____.
          f.Door Configuration: Pair swing doors.
          1)Width: 50-1/2 inches (1283 mm).
          2)Width: 62-1/2 inches (1588 mm).
          3)Width: 66-1/2 inches (1689 mm).
          4)Width: 74-1/2 inches (1892 mm).
          5)Width: _____.
          g.Self-Mating Sidelite:
          1)Width: 13-1/4 inches (337 mm).
          2)Width: 19-1/4 inches (489 mm).
          3)Width: 25-1/4 inches (641 mm).
          4)Width: 31-1/4 inches (794 mm).
          5)Width: 33-1/4 inches (845 mm).
          6)Width: 37-1/4 inches (946 mm).
          7)Width: _____.
          h.Free-Standing Sidelite:
          1)Width: 14-3/8 inches (365 mm).
          2)Width: 20-3/8 inches (518 mm).
          3)Width: 26-3/8 inches (670 mm).
          4)Width: 32-3/8 inches (822 mm).
          5)Width: 34-3/8 inches (873 mm).
          6)Width: 38-3/8 inches (975 mm).
          7)Width: _____.
          ** NOTE TO SPECIFIER ** Delete unit height options not required.
          i.Unit Height: 80-3/4 inches (2051 mm).
          j.Unit Height: 96-3/4 inches (2457 mm).
          k.Unit Height: 108-3/4 inches (2762 mm).
          l.Unit Height: 120-3/4 inches (3067 mm).
          m.Unit Height: _____.
          4.Door Features:
          a.Door Panels: 2 inches (51 mm) thick; nominal door panels.
          b.Complete frame, threshold and weatherstripping.
          ** NOTE TO SPECIFIER ** Delete glazing bead option not required.
          c.Glazing Beads: Extruded snap-on, contoured ogee profile; Colonial.
          d.Glazing Beads: Extruded snap-on, contemporary square profile.
          e.Extruded astragal adaptor.
          f.Extruded installation screw covers.
          5.Glazing:
          ** NOTE TO SPECIFIER ** Delete glazing types and options not required.
          a.Type: 7/16 inch (11 mm) laminated.
          1)Large Missile Rating, 3090 Door Panel: Positive 100 psf (4.79 kPa), negative 110 psf (5.27 kPa).
          2)Large Missile Rating, 3686 Door Panel: Positive 70 psf (3.35 kPa), negative 70 psf (3.35 kPa).
          3)Large Missile Rating, 30100 Door Panel: Positive 70 psf (3.35 kPa), negative 70 psf (3.35 kPa).
          4)Color: Gray.
          5)Color: Clear.
          6)Color: Clear with High performance LoE 366; coating on No. 2 surface.
          7)Color: Clear with High performance LoE 340; coating on No. 2 surface.
          8)Color: Dark Gray, Turtle Code.
          9)Color: Bronze.
          10)Color: Solexia Green.
          11)Color: White Interlayer; Obscure.
          12)Color: Mist, Pattern 62.
          13)Color: Rain.
          14)Heat strengthened or tempered as required.
          b.Type: 1 inch (25 mm) insulated laminated.
          1)Large Missile Rating: Positive 70 psf (3.35 kPa), negative 70 psf (3.35 kPa).
          2)Color: Clear with High Performance LoE 366; coating on No. 2 surface.
          3)Color: Clear with High Performance LoE 270; coating on No. 2 surface.
          4)Color: Clear.
          5)Color: Gray.
          6)Color: Dark Gray, Turtle Code.
          7)Color: Bronze.
          8)Color: Solexia Green.
          9)Color: White Interlayer; Obscure.
          10)Color: Mist, Pattern 62.
          11)Color: Rain.
          12)Heat strengthened or tempered as noted.
          ** NOTE TO SPECIFIER ** Delete finish options not required.
          6.Finish: Powder Coating per AAMA 2603: White.
          7.Finish: Powder Coating per AAMA 2603: Bronze.
          8.Finish: PVDF Coating per AAMA 2605: Bone White.
          9.Finish: PVDF Coating per AAMA 2605: Bronze.
          10.Finish: PVDF Coating per AAMA 2605: Custom color to be selected by Architect.
          11.Finish: PVDF Coating per AAMA 2605: _____.
          12.Finish: Clear Anodized, NAAMM AA-C2241, 215R1, Class 1, minimum 0.7 mils, in natural aluminum color.
          13.Finish: Aspen Wood Grain, pre-treatment plus base powder coat with textured ink sublimation:
          a.Color: Hazelnut Brown.
          b.Color: Mahogany Red.
          c.Color: Walnut Brown.
          14.Construction: Heavyweight extruded aluminum sections for wet glazing, precision cut and assembled with sealant filled hairline joints and no visible screws. Provide grooves in extrusions to receive 3 lines of weather stripping where doors abut frames.
          a.Member Wall Thickness: 0.125 inch (3.2 mm) minimum; 0.150 inch (3.8 mm) at hardware mounting locations.
          b.Door Corner Construction: Assemble using two 3/8 inch (8.9 mm) threaded compression rods in rails, secured at each end with washers and hex nuts.
          c.Glazing Beads: Snap-in design, for exterior wet glazing, .060-inch (1.5 mm) wall thickness, with 0.50 inch (12.7 mm) glass bite for impact-resistant glazing.
          ** NOTE TO SPECIFIER ** Delete hardware option not required.
          15.Hardware, Residential:
          ** NOTE TO SPECIFIER ** Delete hinges, levers and lock options not required.
          a.Hinges: Hager. Standard weight, three knuckles with concealed anti-friction nylatron bearing, 134 metal leaves with 0.312 (7.92 mm) concealed metal pin and plug.
          1)Hinges: 4-1/2 x 4 inch (114 x 102 mm), solid brass.
          2)Hinges: 4-1/2 x 4 inch (114 x 102 mm), stainless steel.
          3)Hinges: 4-1/2 x 4 inch (114 x 102 mm), antique nickel.
          b.Lock: Single cylinder deadbolt.
          c.Lock: Concealed CGI patented three-point locking mechanism, with integrated Baldwin key lock cylinder and thumbturn; single action/one step locking.
          d.Door panels pre-bored for levers.
          e.Levers: Baldwin, passage type, Wave style. Finish: PVD Polished Brass.
          f.Levers: Baldwin, passage type, Wave style. Finish: PVD Satin Nickel.
          g.Levers: Baldwin, passage type, Wave style. Finish: Venetian Bronze.
          h.Levers: Baldwin, passage type, So-Ho style. Finish: PVD Satin Nickel.
          i.Dummy Levers: At inactive panels.
          j.Flushbolts at inactive panels.
          16.Hardware, Commercial:
          a.Concealed Commercial three-point MS deadbolt with integrated key lock cylinder and thumbturn; single action/one step locking.
          b.Exterior cylinder and interior thumbturn.
          c.Interior Push bar and exterior pull handle.
          d.Finish: Clear. Silver aluminum.
          17.Included Options:
          ** NOTE TO SPECIFIER ** Delete options not required.
          a.Panic Hardware. Jackson series 2086 concealed vertical rod exit device.
          b.Extruded double applied; inside and outside raised profile, 1 inch (25 mm) muntins; for laminated glass.
          c.Extruded double applied, raised profile - outside, flat - inside, 1 inch (25 mm) muntins; for insulated laminated glass.
          d.Muntin grids inside insulated glass.
          ** NOTE TO SPECIFIER ** 3-1/2 inch muntins not available with insulated glass. Delete if not required.
          e.Extruded double applied raised profile 3-1/2 inch (89 mm) muntins.
          f.Ture horizontal muntin, 4-5/8 inch (117 mm) wide.
          g.Aluminum and wood panel, 1/2 inch (13 mm) thick; in lieu of glass.
          h.Aluminum and wood panel, 1 inch (25 mm) thick; in lieu of glass.
          18.Sidelite and Transom Panels:
          a.Product: Series 450 Sidelite, transom Panels, and Mullions, by CGI.
          b.Design and Performance: Sidelite and transom panels shall interlock with each other and with any CGI approved vertical aluminum tube mullions at all points of interface, to form a structural unit at each opening, and shall comply with impact, wind, water and structural deflection requirements.
          c.For assemblies with an overall height of less than 108.75 inches (2762 mm) utilize self-mating sidelites. For assemblies with overall height of 108.75 inches (2762 mm) or greater, provide structural mullion between sidelites and sidelites and between sidelites and doors.
          ** NOTE TO SPECIFIER ** Delete transom not required.
          d.Transoms: Utilize CGI door material transoms with integrated transom/door framing system.
          e.Transoms: Utilize window material transoms with aluminum tube mullion.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Do not begin installation until substrates have been properly constructed and prepared.
 
          B.If substrate preparation is the responsibility of another installer, notify Architect in writing of unsatisfactory preparation before proceeding.
 
          3.2PREPARATION
 
          A.Clean surfaces thoroughly prior to installation.
 
          B.Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
 
          C.Perform cutting, fitting, forming, drilling, and grinding of frames, without damage to finish, as needed to fit project conditions and make watertight. Replace components with damage to exposed finishes.
 
          3.3INSTALLATION - WINDOWS
 
          A.Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.
 
          B.Attach window frame and shims to perimeter blocking at openings to accommodate construction tolerances and other irregularities. Maintain integrity of air barriers and vapor retarder sheets.
 
          C.Align windows plumb and level, free of warp or twist.
 
          D.Adjust vents to close snugly and put in smooth operating order.
 
          3.4INSTALLATION - DOORS
 
          A.Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.
 
          B.Set door frames plumb, square, level, and aligned to receive doors. Anchor frames to adjacent construction in strict accordance with manufacturer's recommendations.
 
          C.Where aluminum surfaces contact alkaline substrates such as concrete or mortar, and metals other than stainless steel or zinc, protect from direct contact by painting reactive substrate and dissimilar metals with a heavy coating of bituminous paint in the field.
 
          D.Hang doors and adjust hardware to achieve specified clearances and proper door operation.
 
          3.5CLEANING AND PROTECTION
 
          A.Clean products in accordance with the manufacturer's recommendations.
 
          B.Touch-up, repair or replace damaged products before Substantial Completion.
 
         
END OF SECTION