MasterFormat: 2020

Download this Architectural Glass Glazing Specification for   WORD | WORD-Canadian | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION 08 81 10
	ARCHITECTURAL GLASS GLAZING
	Copyright 2009 - 2020 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** GGI (General Glass International); architectural glass. This section is based on the products of GGI (General Glass International), which is located at: 101 Venture Way Secaucus, NJ 07094-1808 Toll Free Tel: 800-431-2042 Tel: 201-553-1850 Fax: 201-553-1851 Email: request info Web: http://www.generalglass.com [ Click Here ] for additional information. GGI is a leading custom glass fabricator and distributor of architectural glass, including decorative, fire-rated, bird-friendly and other specialty glass solutions for commercial building facades, insulating glass units, interior design and public art applications. Glass that is functional, decorative and environmentally friendly combined with precision workmanship and five generations of glass industry expertise. This is what you can count on from GGI. GGI sources globally, fabricates locally and distributes nationally. We do the exceptional and the everyday with glass. Learn more www.generalglass.com.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	All glass entrance systems.
		B.	Anti-reflective glass.
		C.	Back-painted glass.
		D.	Bird protection glass.
		E.	Direct-to-glass printing on glass. (Alice)
		F.	Fire rated glass.
		G.	Fire rated door and framing assemblies.
		H.	Float glass.
		I.	Glass markerboards. (Max)
		J.	Glass surface protection. (Enhance)
		K.	Insulating glass units with solar control low-e coatings.
		L.	Tinted insulating glass units with solar control low-e coatings.
		M.	Insulating glass.
		N.	Mirrors.
		O.	Patterned glass.
		P.	Satin etched glass.
		Q.	Ultra-Clear Low iron glass.
		R.	Wire glass.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 08 41 13 - Aluminum-Framed Entrances and Storefronts.
		B.	Section 08 50 00 - Windows.
		C.	Section 08 44 16 - Glazed Bronze Curtain Walls.
	1.3	SUBMITTALS
		A.	Submit under provisions of Section 01 30 00 - Administrative Requirements.
		B.	Product Data:
			1.	Manufacturer's data sheets on each product to be used.
			2.	Preparation instructions and recommendations.
			3.	Storage and handling requirements and recommendations.
			4.	Typical installation methods.
	** NOTE TO SPECIFIER ** Delete if not applicable to product type.
		C.	Verification Samples: Two representative units of each type, size, pattern and color.
		D.	Shop Drawings: Include details of materials, construction and finish. Include relationship with adjacent construction.
	1.4	QUALITY ASSURANCE
		A.	Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum five years documented experience.
		B.	Installer Qualifications: Company specializing in performing Work of this section with minimum two years documented experience with projects of similar scope and complexity.
		C.	Source Limitations: Provide each type of product from a single manufacturing source to ensure uniformity.
	** NOTE TO SPECIFIER ** Include mock-up if the project size or quality warrant the expense. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		D.	Mock-Up: Construct a mock-up with actual materials in sufficient time for Architect's review and to not delay construction progress. Locate mock-up as acceptable to Architect and provide temporary foundations and support.
			1.	Intent of mock-up is to demonstrate quality of workmanship and visual appearance.
			2.	If mock-up is not acceptable, rebuild mock-up until satisfactory results are achieved.
			3.	Retain mock-up during construction as a standard to compare with completed work.
			4.	Do not alter or remove mock-up until work is completed or removal is authorized.
	1.5	DELIVERY, STORAGE, AND HANDLING
		A.	Store and handle in per manufacturer's written instructions and recommendations.
		B.	Protect from damage due to weather, excessive temperature, and construction operations.
	1.6	PROJECT CONDITIONS
		A.	Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
	1.7	WARRANTY
		A.	Manufacturer's standard limited warranty unless indicated otherwise.
	** NOTE TO SPECIFIER ** Delete if not required or delete application option not required.
			1.	Enhance - Glass Surface Protection
				a.	Interior Applications: A limited lifetime warranty.
				b.	Exterior Applications: 10-year warranty.
			2.	Insulating Glass Units:
				a.	Manufacturer's standard form in which insulating glass manufacturer agrees to replace insulating glass units that deteriorate within specified warranty period.
				b.	Deterioration of insulating glass is defined as failure of hermetic seal under normal use that is not attributed to glass breakage or to maintaining and cleaning insulating glass contrary to manufacturer's written instructions.
				c.	Evidence of failure is the obstruction of vision by dust, moisture, or film on interior surfaces of glass.
				d.	Warranty Period: 10 years from date of manufacture
	** NOTE TO SPECIFIER ** Verify availability of warranties and warranty periods with products specified in Part 2. Note that glass manufacturer's typically begin the warranty period at the date of manufacture. Fill in blank below or delete line as applicable. Delete options for warranty period not required.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: GGI (General Glass International), which is located at: 101 Venture Way; Secaucus, NJ 07094-1808; Toll Free Tel: 800-431-2042; Tel: 201-553-1850; Fax: 201-553-1851; Email: request info; Web: http://www.generalglass.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs: coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.2	ALL GLASS ENTRANCE SYSTEMS
	** NOTE TO SPECIFIER ** Our dedicated entrance systems team GGI has worked with customers for over 10 years creating fully tempered All-Glass glass entrance and wall systems that work best for each project application. Leveraging a combined 30+ years of experience, our glass entrance system team supports our customers with expert consulting and design services. Specify the dimensions and desired hardware, and the GGI team will handle the rest, including defining the optimal door size based on the opening dimensions and all aspects of design.
		A.	All Glass Entrance Systems:
	** NOTE TO SPECIFIER ** Delete entrance system location and construction options not required.
			1.	Entrance System Location: Exterior.
			2.	Entrance System Location: Interior.
			3.	Construction: Fully-tempered glass; standard.
			4.	Construction: Laminated glass.
	** NOTE TO SPECIFIER ** Delete the following options not required.
			5.	Door Style: Swing doors.
			6.	Door Style: Sliding doors.
			7.	Door Style: Stacking doors.
			8.	Door Style: Sidelites.
			9.	Glazing: Clear.
			10.	Glazing: Ultra Clear Low iron.
			11.	Glazing: Satin etched.
			12.	Glass Thickness: 3/8 inch (10 mm).
			13.	Glass Thickness: 1/2 inch (13 mm).
			14.	Glass Thickness: 5/8 inch (16 mm).
			15.	Glass Thickness: 3/4 inch (20 mm).
			16.	Decorative Doors and Storefronts: Customized with Alice Direct-to-Glass Printing.
	** NOTE TO SPECIFIER ** Extensive choice of hardware including standard and custom door pulls, and exit devices such as panic, EG, deadbolt handles, and more. Contact manufacturer for more information.
			17.	Hardware: ________.
			18.	Hardware Finish: _______.
			19.	Hardware Finish: Custom-painted.
			20.	Hardware Finish: Powder-coated.
			21.	Door Sizes: As detailed on the Drawings.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.3	ANTI-REFLECTIVE GLASS
		A.	Basis of Design: Anti-Reflective Glass as fabricated by GGI.
			1.	Reflections Eliminated: 99 percent of reflections.
			2.	Residual Reflections: Under 0.5 percent per surface; 8x less than regular glass.
			3.	Visible Light transmission: Up to 98 percent.
			4.	Uniform color reflection for best viewing experience.
			5.	Can be combined with Low-e, Solar control and Heat reflecting coatings.
			6.	Cleaning: With appropriate glass cleaner.
			7.	Durability Performance: Meets ISO standards.
			8.	Standards Compliance:
				a.	EN 1096-2 Glass in building - Coated glass - Part 2: Condensation resistance test, neutral salt spray test, and abrasion resistance test.
				b.	DIN ISO 9211-4 Optics and optical instruments - Optical coatings - Part 4: Abrasion resistance test, Adhesion test, and Crosshatch test.
				c.	ISO 9022-2 Optics and optical instruments - Environmental test method - Part 2: Cold, heat and humidity, resistance test, Climate cycling test.
			9.	General Characteristics:
				a.	Drilling and Notching: Yes.
				b.	Edgework: Yes.
				c.	Glass Type: One-Sided: Ultra Clear low iron.
					1)	Thickness: 1/4 inches (6 mm).
					2)	Thickness: 3/8 inches (10 mm).
					3)	Tempered: Yes.
					4)	Bent: Yes.
					5)	Laminated: Yes.
					6)	Printed: Yes.
					7)	UV Bonded: Yes.
				d.	Glass Type: Two-Sided: Ultra clear low iron.
					1)	Thickness: 1/4 inches (6 mm).
					2)	Thickness: 3/8 inches (10 mm).
					3)	Thickness: 1/2 inches (13 mm).
					4)	Tempered: Yes.
					5)	Bent: Yes.
					6)	Laminated: Yes.
					7)	Printed: Yes.
					8)	UV Bonded: Yes.
				e.	Glass Type: Laminated: Ultra clear Low iron.
					1)	Thickness: 3/16 inches (5 mm).
					2)	Thickness: 1/2 inches (13 mm).
					3)	Tempered: No.
					4)	Bent: No.
					5)	Laminated: No.
					6)	Printed: No.
					7)	UV Bonded: No.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.4	BACK-PAINTED GLASS
		A.	Basis of Design: Back Painted Glass as manufactured by GGI for Back-Painted.
			1.	High-Opacity Coverage. Water based paint, machine sprayed and cured.
			2.	Interior Use: Where glass is viewed from non-painted side; wall cladding, backsplashes, furniture, and markerboards. Additional backing is not required.
	** NOTE TO SPECIFIER ** Other glass types available. Contact manufacturer for more information.
			3.	Float Glass: Base glass unless specified otherwise.
				a.	Annealed: ASTM C1036, Type I Transparent Flat, Class 1 - Clear, Quality-Q3.
				b.	Heat-Strengthened, Tempered: ASTM C1048, Kind HS and FT.
				c.	Tempered Safety Glass: Complies with ANSI Z97.1 and 16 CFR 1201 criteria.
				d.	Tinted: ASTM C1036, Class 2 Tinted, Quality-Q3.
					1)	Color and performance characteristics as indicated.
				e.	Patterned: ASTM C1036, Type II Patterned Flat Glass, Quality-Q5, Form 3,
					1)	Color and performance characteristics as indicated.
			4.	Glass Units: Type G-12 - Back Painted Glass: Painted on one surface and highly opaque, silk screened with ceramic frit, or roller coat, or sprayed.
				a.	Glass Tint: Ultra clear low iron, or Clear.
				b.	Glass Type: Fully tempered or heat strengthened.
				c.	Glass Thickness: 3/16 to 3/4 inches (5 to 19 mm).
	** NOTE TO SPECIFIER ** Standard colors and custom matching of RAL and Pantone colors. Custom colors and patterns are available by special order. Delete color options not required.
			5.	Colors: ________.
			6.	Colors: As determined by the Architect.
			7.	Color: As detailed on the Drawings.
			8.	Fabrication:
				a.	Annealed: Yes.
				b.	Tempering: Prior to painting.
				c.	Polishing: Yes.
				d.	Drilling and Notching: Yes.
				e.	Laminating: No.
				f.	Bending: No.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.5	BIRD PROTECTION GLASS
	** NOTE TO SPECIFIER ** Hundreds of millions of birds are killed annually in North America due to collisions with glass on human-built structures. Bird collisions are a significant cause of avian mortality globally. Approved by the American Bird Conservancy, ORNILUX provides bird protection without compromising thermal performance or light transmission. "Mikado" refers to the unique pattern design.
		A.	Basis of Design: ORNILUX Bird Protection Glass as manufactured by Arnold Glas and fabricated by GGI. Bird collision mitigation with a high level of transparency.
			1.	Patterned, UV-reflective coating visible to birds but transparent to humans.
			2.	Can be combined with Arnold Glass low-emissivity coating or solar control coating for use in insulating glass configuration for energy-efficiency.
			3.	Tested and approved "Effective" by American Bird Conservancy.
			4.	May be used in triple-laminated glass, or as part of an insulating glass unit.
			5.	Heat-strengthened or tempered. Low-iron glass is available.
	** NOTE TO SPECIFIER ** Delete thickness options not required.
			6.	Thickness: 5/32 inch (4 mm).
			7.	Thickness: 1/4 inch (6 mm).
			8.	Thickness: 5/16 inch (8 mm).
			9.	Thickness: 3/8 inch (10 mm).
			10.	Thickness: 1/2 inch (13 mm).
	** NOTE TO SPECIFIER ** Delete glazing system options not required.
			11.	Glazing System: Double glazing system.
			12.	Glazing System: Triple Insulating.
			13.	Glazing System: Triple Laminated.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.6	DIRECT-TO-GLASS PRINTING ON GLASS
	** NOTE TO SPECIFIER ** Delete basis of design option not required.
		A.	Basis of Design: Alice Digital Printed Direct to Glass as manufactured by GGI. Extremely Durable Ceramic Frit: Fused into ultra-clear low iron glass creating permanent designs.
				a.	UV, fade, and scratch-resistant.
				b.	Suitable for interior or exterior applications.
				c.	Unique panel sizes and shapes may be incorporated.
			1.	High Resolution Printing: Fine lines, typography, complex images, photographs, artwork adaptation, and material imitation.
			2.	Precision Processing and Printing: Print images one-on-top of the other, creating different views on each side of glass.
				a.	Tile single images across entire facade or walls. Glass Materials:
	** NOTE TO SPECIFIER ** Other glass types available. Contact manufacturer for more information.
				b.	Float Glass: Base glass unless specified otherwise.
					1)	Heat-Strengthened, Tempered: ASTM C1048, Kind HS and FT.
					2)	Tempered Safety Glass: ANSI Z97.1 and 16 CFR 1201.
				c.	Laminated Glass: Float glass laminated per ASTM C1172.
				d.	Laminated Safety Glass: Per ANSI Z97.1 and 16 CFR 1201 test requirements
				e.	Glass Thickness: 3/16 to 3/4 inches (5 to 19 mm).
			3.	Applications: As indicated on drawings.
	** NOTE TO SPECIFIER ** Delete color options not required.
			4.	Colors: ________.
			5.	Colors: As indicated on drawings.
			6.	Printing Style: As indicated on drawings.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.7	FIRE-RATED GLASS
		A.	Basis of Design: Pyrobel Series; manufactured by AGC Glass Europe; fabricated by GGI.
			1.	Float Glass: Base glass unless noted otherwise.
				a.	Annealed: ASTM C1036 Type I - Transparent Flat, Class 1 - Clear, Quality-Q3.
				b.	Heat-Strengthened and Tempered: ASTM C1048, Kind HS and FT.
				c.	Tempered Safety Glass: Per ANSI Z97.1 and 16 CFR 1201.
			2.	Glass Units: Type G-3 - Fire-Resistance-Rated Glazing.
				a.	Type, thickness, and configuration that contains flame, smoke, and blocks radiant heat, to achieve indicated fire-rating period exceeding 45 minutes.
					1)	See Section - 3 for glazing in fire-rated framing assemblies.
				b.	Applications:
					1)	Glazing in fire-rated door assembly.
					2)	Glazing in fire-rated window assembly.
					3)	Glazing in sidelites, borrowed lites, and other glazed openings in fire-rated wall assemblies.
					4)	Other locations as indicated on drawings.
				c.	Glass Type: Multi-laminate annealed glass with intumescent fire retardant interlayers. Listed by INTERTEK or UL; approved by authorities having jurisdiction.
					1)	UL Design Number: _____.
					2)	Safety Glazing Certification: 16 CFR 1201 Category II.
					3)	Glazing Method: As required for fire rating.
					4)	Markings for Fire-Resistance-Rated Glazing Assemblies: Permanent markings on fire-resistance-rated glazing per ICC (IBC), local building code, and authorities having jurisdiction.
						a)	W: Meets wall assembly criteria ASTM E119 or UL 263.
						b)	D: Meets door assembly criteria NFPA 252, UL 10B, or UL 10C.
						c)	H: Meets door assembly hose stream test NFPA 252, UL 10B, or UL 10C.
						d)	T: Meets temperature rise not more than 450 degrees F (232 degrees C) above ambient at end of 30 minutes fire exposure per NFPA 252, or UL 10C.
						e)	XXX: Placeholder representing fire-rating period, in minutes.
	** NOTE TO SPECIFIER ** Delete Product attributes paragraph options not required
			3.	Product Attributes: Pyrobel 45. Fire Rating: 45 minute fire rating with hose stream.
				a.	Maximum Glass: Pyrobel 45. For thickness of 5/8 inch (16 mm).
					1)	Doors (WxH): 58-3/4 x 58-3/4 inches (1492 x 1492 mm).
					2)	Windows (WxH): 96 x 96 inches (2438 x 2438 mm).
					3)	Borrowed Lites (WxH): 96 x 96 inches (2438 x 2438 mm).
					4)	Sidelites (WxH): 96 x 96 inches (2438 x 2438 mm).
	** NOTE TO SPECIFIER ** Delete general characteristics options not required.
				b.	General Characteristics: Interior.
					1)	Thickness 5/8 inch (16 mm) minus 0, plus 1.5 mm.
					2)	Weight: 8.2 psf (40 kg per sq m).
					3)	Light transmission: 85 percent.
					4)	Sound Reduction (Rw): 39 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.09.
					7)	U-value: 0.915.
				c.	General Characteristics: Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 3/4 inch (20 mm) plus or minus 0.04 inches (1 mm).
					2)	Weight: 9.8 psf (48 kg per sq m).
					3)	Light transmission: 83 percent.
					4)	Sound Reduction (Rw): 40 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.14.
					7)	U-value: 0.881.
				d.	General Characteristics: Insulated Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-1/4 inch (34 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 13.2 psf (64 kg per sq m).
					3)	Light transmission: 74 percent.
					4)	Sound Reduction (Rw): 42 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.89.
					7)	U-value: 0.528.
			4.	Product Attributes: Pyrobel 60. Fire Rating: 60 minute fire rating with hose stream.
				a.	Maximum Glazing Sizes: Pyrobel 60. For thickness of 5/8 inch (16 mm).
					1)	Doors (WxH): 87-5/8 x 87-5/8 inches (2226 x 2226 mm).
					2)	PyroFrames (WxH): 86-5/8 x 86-5/8 inches (2200 x 2200 mm). 5/8 inch (16 mm) thick.
					3)	Vision 60 (WxH): 48 x 96 inches (1219 x 2438 mm).
					4)	StileLite (WxH): 93 x 93 inches (2362 x 2362 mm).
				b.	General Characteristics: Interior.
					1)	Thickness 1 inch (25 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 12.3 psf (60 kg per sq m).
					3)	Light transmission: 81 percent.
					4)	Sound Reduction (Rw): 42 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.14.
					7)	U-value: 0.881.
				c.	General Characteristics: Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-1/4 inch (29 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 13.94 psf (68 kg per sq m).
					3)	Light transmission: 80 percent.
					4)	Sound Reduction (Rw): 43 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.16.
					7)	U-value: 0.862.
				d.	General Characteristics: Insulated Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-3/4 inch (45 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 17 psf (83 kg per sq m).
					3)	Light transmission: 71 percent.
					4)	Sound Reduction (Rw): 44 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 2.18.
					7)	U-value: 0.458.
			5.	Product Attributes: Pyrobel 90. Fire Rating: 90 minute fire rating with hose stream.
				a.	Maximum Glazing Sizes: For thickness of 5/8 inch (16 mm).
					1)	Doors (WxH): 87-5/8 x 87-5/8 inches (2226 x 2226 mm).
					2)	PyroFrames (WxH): 86-5/8 x 86-5/8 inches (2200 x 2200 mm).
					3)	Vision 60 (WxH): 48 x 96 inches (1219 x 2438 mm).
					4)	StileLite (WxH): 93 x 93 inches (2362 x 2362 mm).
				b.	General Characteristics: Interior.
					1)	Thickness 1 inch (25 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 12.3 psf (60 kg per sq m).
					3)	Light transmission: 81 percent.
					4)	Sound Reduction (Rw): 42 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.14.
					7)	U-value: 0.881.
				c.	General Characteristics: Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-1/4 inch (29 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 13.94 psf (68 kg per sq m).
					3)	Light transmission: 80 percent.
					4)	Sound Reduction (Rw): 43 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.16.
					7)	U-value: 0.862.
				d.	General Characteristics: Insulated Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-3/4 inch (45 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 17 psf (83 kg per sq m).
					3)	Light transmission: 71 percent.
					4)	Sound Reduction (Rw): 44 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 2.18.
					7)	U-value: 0.458.
			6.	Product Attributes: Pyrobel 120. Fire Rating: 120 minute fire rating with hose stream.
				a.	Maximum Glazing Sizes: For thickness of 5/8 inch (16 mm).
					1)	Doors (WxH): 87-5/8 x 87-5/8 inches (2226 x 2226 mm).
					2)	PyroFrames (WxH): 86-5/8 x 86-5/8 inches (2200 x 2200 mm).
					3)	Vision 60 (WxH): 48 x 96 inches (1219 x 2438 mm).
					4)	StileLite (WxH): 93 x 93 inches (2362 x 2362 mm).
				b.	General Characteristics: Interior.
					1)	Thickness 1 inch (25 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 12.3 psf (60 kg per sq m).
					3)	Light transmission: 81 percent.
					4)	Sound Reduction (Rw): 42 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.14.
					7)	U-value: 0.881.
				c.	General Characteristics: Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-1/4 inch (29 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 13.94 psf (68 kg per sq m).
					3)	Light transmission: 80 percent.
					4)	Sound Reduction (Rw): 43 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 1.16.
					7)	U-value: 0.862.
				d.	General Characteristics: Insulated Exterior from minus 20 to 120 degrees F (minus 7 to 49 degrees C).
					1)	Thickness 1-3/4 inch (45 mm) plus or minus 0.08 inches (2 mm).
					2)	Weight: 17 psf (83 kg per sq m).
					3)	Light transmission: 71 percent.
					4)	Sound Reduction (Rw): 44 dB.
					5)	Safety Rating CPSC 16CFR1201 Cat. II 400 ft. lbs. ANSI Z97.1.
					6)	R-value: 2.18.
					7)	U-value: 0.458.
		B.	Basis of Design: PyroGuard Series as fabricated by GGI.
			1.	Fire-rated 3-PLY laminated glass material listed for use in impact safety-rated locations such as doors.
				a.	Wire-free laminated glass for door lites.
				b.	Intumescent interlayer protecting against radiant heat.
				c.	UV stability for interior and exterior applications.
				d.	Exposed Glazing: Maximum dimensions.
					1)	Area: 1404 sq in (0.906 sq m).
					2)	Width: 28 inch (711 mm). Height: 62 inch (1575 mm).
			2.	Fire Rated Glazing: Composed of wired glass with a surface-applied fire-rated film.
				a.	Thickness: 5/16 inches (7.2 mm).
				b.	Weight: 2.4 lbs per sq ft (11.72 kg per sq m).
				c.	Fire-rating: 20 minutes without hose stream for doors.
				d.	Impact Safety Resistance: ANSI Z97.1 Class U/B and/or CPSC 16CFR1201 Cat. I. Positive Pressure Test: UL 10C; passes.
			3.	Labeling: Permanently label each piece with, UL logo and fire rating, and appropriate marks as approved by local authority having jurisdiction.
			4.	Fire Rating: Fire rating classified and labeled by UL for fire rating scheduled at opening locations on drawings, when tested in accordance with:
	** NOTE TO SPECIFIER ** Delete standards options not required.
				a.	ASTM E2010-01,
				b.	ULC Standards CAN4 S-104 and CAN4 S-106
				c.	NFPA 257
				d.	UL 9 and UL 10C.
			5.	Glazing Tape: Closed cell polyvinyl chloride foam, coiled on release paper over adhesive on two sides. Maximum water absorption by volume of 2 percent.
			6.	Silicone Sealant: One-part neutral curing silicone, medium modulus sealant, Type S; Grade NS; Class 25 with additional movement capability of 50 percent in both extension and compression; total 100 percent.
				a.	Dow Corning 795 - Dow Corning Corp.
				b.	Silglaze-II 2800 - General Electric Co.
				c.	Spectrem 2 - Tremco Inc.
			7.	Setting Blocks: Neoprene, EPDM, or silicone; tested for compatibility with glazing compound; of 70 to 90 Shore A hardness.
			8.	Cleaners, Primers, and Sealers: As recommended by manufacturer.
		C.	Basis of Design: PYRAN Platinum; manufactured by Schott; fabricated by GGI.
			1.	Fire-rated glass ceramics designed to delay spread of fire, hot gases and smoke. Provides high thermal shock resistance and stays transparent. Available with surface-applied film or laminated, meeting safety impact code requirements. Use with fire-rated frames with same rating. May be used in insulating glass units. May be lightly sandblasted or delivered with surface-applied opacity film.
			2.	Standards Compliance:
				a.	Classified and labeled by Underwriters Laboratories, Inc. for United States and Canada under File No. R22036.
				b.	Fire Tests: Per UL 9, UL 10C, UBC 7-2 (1997), UBC 7-4 (1997), NFPA 257, NFPA 80, ASTM E2010 -01, ASTM E2074-00, and ULC CAN4-S106.
	** NOTE TO SPECIFIER ** Delete platinum options not required.
			3.	Pyran Platinum: Fire-rating: 90 minutes.
				a.	Floated glass-ceramic does not require polishing.
				b.	Impact Rating: None.
			4.	Pyran Platinum F: Fire-rating: 90 minutes. 189 minutes indoors.
				a.	Floated glass-ceramic; surface applied film. Does not require surface polishing.
				b.	Impact Rating: ANSI Z97.1 Class A and CPSC 16 CFR1201 Cat. l and ll.
			5.	Pyran Platinum L: Fire-rating: 90 minutes. 189 minutes in doors.
				a.	Specially floated glass-ceramic does not require polishing.
				b.	Impact Rating: ANSI Z97.1 Class A and CPSC 16 CFR1201 Cat. l and ll.
				c.	STC Rating: 36 dB Approximately.
			6.	Sustainability: Meets LEED Innovation in Design requirements.
				a.	Cradle to Cradle Certified Silver by MBDC.
				b.	Qualifies for Environmentally Preferred Purchasing Program (EPP).
			7.	General Characteristics:
				a.	Thickness: 3/16 inches (5 mm).
				b.	Weight: 2.5 lbs per sq ft (12.2 kg per sq m).
				c.	Clear. Must have neutral coloration free of amber tints.
				d.	Surface Finish: Float glass quality.
				e.	Transparent and wireless.
				f.	Withstands thermal shock.
				g.	Conforms to positive pressure test standards.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.8	FIRE RATED DOOR AND FRAMING ASSEMBLIES
		A.	Basis or Design: PyroFrames with PyroDoors as furnished by GGI. Factory fabricated and finished framing with glazing and related flashings, anchorage and attachment devices.
			1.	Structural Performance: Support dead loads and horizontal live loads equivalent to the following: coordinate connection to main structural members.
				a.	Design Live Loads: Comply with requirements of the following:
					1)	Positive Design Live Load: ____ lbf/sq ft (___ Pa).
					2)	Negative Design Live Load: ____ lbf/sq ft (___ Pa).
				b.	Design Load Resistance per ASTM E1300: For glass type, thickness, dimensions, and maximum lateral deflection of supported glass.
				c.	Edge Support System: Lateral deflection of supported glass edges to be less than 1/175 of their lengths or 3/4 inch (19 mm), whichever is less, under specified design load.
			2.	Fire Performance: Hourly fire-resistance-rating as indicated; tested as an assembly including glazing. Comply with ASTM E119 or UL 263 and requirements of local authorities having jurisdiction.
				a.	Acceptable evidence of compliance includes listing by UL (DIR), INTERTEK (DIR), or testing agency acceptable to authorities having jurisdiction.
			3.	PyroFrames Attributes:
				a.	Multiple profile options available, including stainless steel.
				b.	Fully weeped system with glazing gaskets.
				c.	Shear block construction can be supplied in KD bar lengths or fully fabricated.
				d.	Labeling: Manufacturer's name, testing laboratory, rating and safety standards.
	** NOTE TO SPECIFIER ** Delete profile material option not required.
				e.	Profile Material: Mild steel to ST37-2 quality per DIN 17100. Equivalent to S235 JRG2 per EN10025.
					1)	Galvanized interior/exterior profiles to 275 grams per sq m per EN10142.
				f.	Profile Material: Stainless steel to 1.4301 and 1.4404 quality per DIN 17100. Equivalent to 304 and 316L to AISI standards.
				g.	Cap Materials: Aluminum alloy to eloxadisable ALMgSi0.5 per DIN 1747 and DIN 17615.
				h.	System Fasteners: Zinc coated 1.4301 stainless steel per DIN EN17440. Equivalent to 304 quality to AISI standards.
				i.	System Gaskets:
					1)	Non cellular elastomer compound per DIN EN7863. Performance classifications per EN13830.
					2)	Water Intrusion Resistance 1650 Pa / Air Permeability greater than 600 Pa / Sound Insulation up to 47 dB.
			4.	PyroDoors Attributes:
				a.	Narrow profile, roll-formed steel doors and frames manufactured for 20 to 90 minute fire rating applications with hose stream.
				b.	Tested per UL 10c, UBC 7-2 , NFPA 252, CAN4 S104 with Pyrobel glass.
				c.	Internal and external surface protection provided by Sendzimir galvanizing for maximum durability in combination with painted finishes.
				d.	Limits Temperature - Rise to 2500 F (1371 degrees C) at 30 minutes
				e.	A choice of concealed or surface mounted hinges and closers.
				f.	Non-rebated or rebated meeting stiles.
				g.	Standard panic bars and automatic operators available.
				h.	Fully fabricated door and frame assembly for ease of installation.
				i.	Labeling: Manufacturer's name, testing laboratory, rating and safety standards.
	** NOTE TO SPECIFIER ** Delete profile materials option not required.
				j.	Profile Materials: Mild steel to ST37-2 quality per to DIN 17100.
					1)	Sendzimir galvanizing of interior and exterior of profiles to 275 grams per sq m per EN10142.
				k.	Profile Materials: Stainless steel to 1.4301 and 1.4404 quality per to DIN 17100.
				l.	System fasteners: Zinc coated 1.4301 stainless steel per DIN EN17440.
				m.	System Gaskets:
					1)	Non cellular elastomer compound to DIN EN7863.
					2)	Water Intrusion Resistance 1650 Pa / Air Permeability greater than 600 Pa / Sound Insulation up to 47 dB.
		B.	Basis or Design: StileLite Steel Doors and Framing as manufactured by StileLite and fabricated by GGI.
			1.	Hollow metal transparent wall systems.
	** NOTE TO SPECIFIER ** Delete temperature rise option not required.
				a.	Temperature Rise: 60 to 120 minute.
				b.	Temperature Rise: 20 to 90 minute
			2.	Unlimited number of framing modules up to 49-7/8 inches (1267 mm) wide.
			3.	Visible Glass Area: Each opening up to 3,916 sq in (2.53 sq m), not exceeding 46-3/4 x 83-3/4 (1187 x 2127 mm).
			4.	Frames: 14 gauge steel; cold-rolled.
			5.	Frames: 14 gauge steel; galvanized.
			6.	Frames: No 4 stainless steel.
			7.	Jamb Size: 4-3/4 to 14 inches (121 x 356 mm) with 5/8 inch (16 mm) glass stops.
			8.	Doors (WxH): Up to 48 x 108 inches (1219 x 2743 mm).
			9.	Frames and doors per ASTM E119, NFPA 251, UL 263, CANULC S101, and UL 10c.
			10.	Finish: Powder coat.
			11.	Finish Tnemec factory painted.
			12.	Finishing for Doors: Wood grain.
			13.	Finishing for Doors: Stainable steel.
			14.	Finishing for Doors: Plastic laminate.
			15.	Finishing for Doors: Factory-finished wood.
			16.	Labeling: Bear manufacturer's name, testing laboratory, rating and safety standards.
			17.	General Characteristics:
				a.	Maximum Overall Fire-Rated Door and Frame Sizes:
					1)	Frames (WxH): 174 x 144 inch (4420 x 3658 mm).
					2)	Single Doors (WxH): 51 x 120 inch (1295 x 3048 mm).
					3)	Door Pairs (WxH): 102 x 120 inch (2591 x 3048 mm).
					4)	Transparent Wall System: No size limit.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.9	FLOAT GLASS
		A.	Basis of Design: Float Glass as furnished by GGI.
			1.	Annealed Type: ASTM C1036, Type I - Transparent Flat, Class 1 - Clear, Quality-Q3.
			2.	Heat-Strengthened, Tempered: ASTM C1048, Kind HS and FT.
			3.	Tempered Safety Glass: ANSI Z97.1 and 16 CFR 1201.
	** NOTE TO SPECIFIER ** Delete glazing types and options not required.
			4.	Glazing Type: Clear glass. Transparent glass with a subtle green tint.
				a.	Fabrication: Alice Direct-to-Glass Printing.
				b.	Fabrication: Enhance single or double sided surface protection.
				c.	Fabrication: Laminated.
				d.	Fabrication: Tempered.
				e.	Fabrication: Insulated.
				f.	Thickness: Up to 3/4 inch (20 mm).
	** NOTE TO SPECIFIER ** Contact manufacturer for sizes.
				g.	Sizes: ________.
			5.	Glazing Type: Low-iron glass. Ultra-clear float glass for the highest level of visible light transmission and truest color rendering when viewing objects through the glass. Ultra-Clear with its signature blue edge is available by request.
				a.	Fabrication: Alice Direct-to-Glass Printing.
				b.	Fabrication: Back painted.
				c.	Fabrication: Enhance single or double sided surface protection.
				d.	Fabrication: Laminated.
				e.	Fabrication: Tempered.
				f.	Fabrication: Insulated.
				g.	Product: Cut-to-size.
	** NOTE TO SPECIFIER ** Delete thickness options not required.
				h.	Thickness: 3/16 inch (5 mm)
				i.	Thickness: 1/4 inch (6 mm).
				j.	Thickness: 3/8 inch (10 mm).
				k.	Thickness: 1/2 inch (13 mm).
				l.	Thickness: 3/4 inch (20 mm).
	** NOTE TO SPECIFIER ** Contact manufacturer for sizes.
				m.	Sizes: ________.
			6.	Glazing Type: Tinted float. Reduces solar heat gain, UV and glare inside a building.
				a.	Fabrication: Alice Direct-to-Glass Printing.
				b.	Fabrication: Back-painted.
				c.	Fabrication: Enhance single or double-sided surface protection.
				d.	Fabrication: Laminated.
				e.	Fabrication: Tempered.
				f.	Fabrication: Insulated.
				g.	Product: Cut-to-size.
	** NOTE TO SPECIFIER ** Delete thickness options not required.
				h.	Thickness: 1/8 inch (3 mm).
				i.	Thickness: 3/16 inch (5 mm).
				j.	Thickness: 1/4 inch (6 mm).
				k.	Thickness: 3/8 inch (10 mm).
				l.	Thickness: 1/2 inch (13 mm).
	** NOTE TO SPECIFIER ** Contact manufacturer for sizes.
				m.	Sizes: ________.
				n.	Color Tint: Bronze.
				o.	Color Tint: Green.
				p.	Color Tint: Grey.
				q.	Color Tint: Ultra-Clear Low Iron Glass.
			7.	Glazing Type: Solarcool reflective glass: Reflects solar heat gain.
				a.	Solarcool is applied on first or second surface facing outwards.
					1)	First Surface: Bright metallic. Mutes tinted glass substrate color.
					2)	Second Surface: Adds reflectivity. Deepens hue of tinted glass substrate.
				b.	Fabrication: Alice Direct-to-Glass Printing.
				c.	Fabrication: Back painted.
				d.	Fabrication: Enhance single or double sided surface protection.
				e.	Fabrication: Laminated.
				f.	Fabrication: Tempered.
				g.	Fabrication: Insulated.
				h.	Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Contact manufacturer for sizes.
				i.	Sizes: ________.
				j.	Color Tint: Bronze.
				k.	Color Tint: Grey.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.10	GLASS MARKERBOARDS
		A.	Basis of Design: MAX Glassboards as manufactured by GGI. Interior applications only. Easy to clean, no staining. No special cleaning agent required. Non-porous hygienic surface.
	** NOTE TO SPECIFIER ** Delete customization options not required or delete entire paragraph.
			1.	Customization:
				a.	Shapes: As detailed on the Drawings.
				b.	Shapes: ________.
				c.	Cut-outs, holes and notches: As detailed on the Drawings.
				d.	Cut-outs, holes and notches: ________.
				e.	Color back-painting. As detailed on the Drawings.
				f.	Color back-painting. ________.
				g.	Custom printed designs made easy. As detailed on the Drawings.
				h.	Custom printed designs made easy. ________.
				i.	Simulated chalkboards: Green or black.
				j.	Simulated chalkboards: Black.
			2.	Markerboard Attributes:
	** NOTE TO SPECIFIER ** Custom Sizes Are Available. Delete attribute options not required.
				a.	Sheet Size (inch/mm): ________.
				b.	Sheet Size; Minimum: 12 x 12 inch (305 x 305 mm).
				c.	Sheet Size; Maximum: 70 x 144 inch (1778 x 3658 mm).
				d.	Glass Thickness; Single-Sided: 3/16 to 1/4 inch (5 to 6 mm).
				e.	Glass Thickness; Double-Sided: 3/8 to 1/2 inch (10 to 13 mm).
				f.	Glass Type: Clear.
				g.	Glass Type: Ultra-Clear Low-Iron..
				h.	Glass Type: Crystal Light for a soft matte finish
				i.	Magnetic.
				j.	Non-Magnetic.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.11	GLASS SURFACE PROTECTION
		A.	Basis of Design: Enhance Glass protection as fabricated by GGI.
			1.	Standards Compliance: ASTM C1036 Type 1 transparent quality Q-3. ASTM C-1048, ASTM C1172, ASTM C1323, ASTM C1624, ASTM C1674, ASTM C813, ASTM C912, and ASTM D2486.
			2.	Environmentally Responsible: Can contribute to LEED credits.
			3.	Ultra-thin coating to protect glass surfaces from corrosion excessive exposure to water, high-humidity, minerals, dirt and other contaminants.
				a.	Permanent and invisible.
				b.	Protects from staining over time.
				c.	Highly-resistant to UV.
	** NOTE TO SPECIFIER ** Delete application option not required.
			4.	Application: 1-sided.
			5.	Application: 2-sided.
			6.	Exterior Glass Types:
				a.	Clear Float Glass; green hue.
				b.	Colored, cast, special or stained glass.
				c.	Clear and ultra-clear low iron glass.
				d.	Satin etched glass.
				e.	Digitally-printed glass.
				f.	Patterned glass.
				g.	Tempered, annealed or heat strengthened; monolithic, laminated, and IGU,
				h.	Spandrel or other non-vision glass types.
				i.	Balustrade, guard rail, balcony or other life safety glass types.
				j.	Interior Glass Types:
					1)	Sliding glass doors and windows.
					2)	Door and side lites and transoms.
				k.	Specialty Glass:
					1)	Bullet rated, Bomb rated or other specialty impact glass.
					2)	Overhead skylights and slope glass.
					3)	Curtain wall or ribbon wall sections.
					4)	Satin etched and sand blasted design glass.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.12	INSULATING GLASS WITH SOLAR CONTROL LOW-E COATINGS
		A.	Basis of Design: Energy Select 23 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only. Maximum solar control in hottest climate regions. Featuring a neutral blue-grey reflected color, Lets natural light in, keeps more heat out, maximizing energy savings and creating greater indoor comfort.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			1.	Laminated.
			2.	Tempered.
			3.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			4.	Glazing Thickness: 1/4 inch (6 mm); standard.
			5.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard
			6.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 23 Neutral Blue Grey: SHGC: 0.22. Light to Solar Gain: 2.16
			7.	Inboard Glass Lite: Clear glass. No coating.
		B.	Basis of Design: Energy Select 28 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only. Excellent solar control, a neutral appearance, and low reflectivity. For commercial buildings in warmest climate regions where air conditioning costs are the primary concern.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			1.	Laminated.
			2.	Tempered.
			3.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			4.	Glazing Thickness: 1/4 inch (6 mm); standard.
			5.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
			6.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 28 Neutral: SHGC: 0.28. Light to Solar Gain: 2.18.
	** NOTE TO SPECIFIER ** Delete inboard glass lite options not required.
			7.	Inboard Glass Lite: Clear glass no coating.
			8.	Inboard Glass Lite: Pyrolytic Passive solar low-e Energy Select 73 Plus on surface 4 as manufactured by AGC Glass North America.
			9.	Inboard Glass Lite: Energy Advantage on surface 4 as manufactured by Pilkington.
		C.	Basis of Design: Energy Select 31 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only.
			1.	Commercial and mixed-use building applications; meeting the most stringent energy code requirements. Exceptional performance in warm and cold weather throughout North America. Its neutral color offers 21 percent mid-range reflectance, an excellent light-to-solar-gain of 2.01 and high visible light transmittance.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			2.	Laminated.
			3.	Tempered.
			4.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			5.	Glazing Thickness: 1/4 inch (6 mm); standard.
			6.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
			7.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 31 Neutral Blue Grey: SHGC: 0.31. Light to Solar Gain: 2.01.
			8.	Inboard Glass Lite: Clear glass. No coating.
		D.	Basis of Design: Energy Select 36 as manufactured by AGC Glass North America and fabricated by GGI.
			1.	Blocks solar heat gain. Provides energy efficiency, attractive neutral appearance, and high visible light transmittance of 65 percent while blocking 68 percent of solar energy.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			2.	Laminated.
			3.	Tempered.
			4.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			5.	Glazing Thickness: 1/4 inch (6 mm); standard.
			6.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
			7.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 36: Neutral. SHGC: 0.36. Light to Solar Gain: 1.79.
	** NOTE TO SPECIFIER ** Delete inboard glass lite options not required.
			8.	Inboard Glass Lite: Clear glass no coating.
			9.	Inboard Glass Lite: Pyrolytic Passive solar low-e Energy Select 73 Plus on surface 4 as manufactured by AGC Glass North America.
			10.	Inboard Glass Lite: Energy Advantage on surface 4 as manufactured by Pilkington.
		E.	Basis of Design: Energy Select 40 as manufactured by AGC Glass North America and fabricated by GGI. For exterior use.
			1.	For commercial buildings in moderate climate regions. Delivers energy savings and high levels of natural light transmission with neutral appearance.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			2.	Laminated.
			3.	Tempered.
			4.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			5.	Glazing Thickness: 1/4 inch (6 mm); standard.
			6.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
			7.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 40: Neutral. SHGC: 0.39. Light to Solar Gain: 1.79.
	** NOTE TO SPECIFIER ** Delete inboard glass lite options not required.
			8.	Inboard Glass Lite: Clear glass no coating.
			9.	Inboard Glass Lite: Pyrolytic Passive solar low-e Energy Select 73 Plus on surface 4 as manufactured by AGC Glass North America.
			10.	Inboard Glass Lite: Energy Advantage on surface 4 as manufactured by Pilkington.
		F.	Basis of Design: Energy Select R42 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only. For high-rise residential and architectural facades. For regions where air conditioning is used most of the year.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened are options. Delete options not required.
			1.	Laminated.
			2.	Tempered.
			3.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			4.	Glazing Thickness: 1/4 inch (6 mm); standard.
			5.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
			6.	Outboard Glass Lite Coating Position: Surface 2.
				a.	Energy Select 31: Neutral. SHGC: 0.42. Light to Solar Gain: 1.45.
			7.	Inboard Glass Lite: Clear glass. No coating.
		G.	Basis of Design: Energy Select 73 Plus as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only.
			1.	A pyrolytic passive solar low-emissivity glass offering thermal insulation and excellent year-round energy efficiency. Saves energy costs during colder months by reflecting heat back into the room while also allowing free solar energy into interior spaces. During warmer months, reduces direct sunlight and blocks re-radiated solar heat.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened options. Delete options not required.
			2.	Laminated.
			3.	Tempered.
			4.	Heat strengthened.
	** NOTE TO SPECIFIER ** Other thickness are available. Contact manufacturer for more details.
			5.	Glazing Thickness: 1/4 inch (6 mm); standard.
			6.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard.
	** NOTE TO SPECIFIER ** Delete coating options not required.
				a.	Energy Select 73 Plus: Neutral. SHGC: 0.69. Light to Solar Gain: 1.06.
					1)	Inboard Glass Lite Coating Position: Surface 3.
				b.	Energy Select 28/U4: Neutral. SHGC: 0.27. Light to Solar Gain: 2.14.
					1)	Outboard Glass Lite Coating Position: Surface 2.
					2)	Inboard Glass Lite Coating Position: Surface 4.
				c.	Energy Select 36/U4: Neutral. SHGC: 0.34. Light to Solar Gain: 1.76.
					1)	Outboard Glass Lite Coating Position: Surface 2.
					2)	Inboard Glass Lite Coating Position: Surface 4.
				d.	Energy Select 40/U4: Neutral. SHGC: 0.37. Light to Solar Gain: 1.76.
					1)	Outboard Glass Lite Coating Position: Surface 2.
					2)	Inboard Glass Lite Coating Position: Surface 4.
		H.	Basis of Design: Pilkington Energy Advantage as fabricated by GGI.
			1.	For insulating glazing units. Low-e coatings applied to the No. 2 and No. 4 surfaces of an insulating unit reducing center of glass U-factor approximately 20 percent compared to an IGU with a pyrolytic low-e and an uncoated clear lite. This proven technology improves thermal performance in a new or reglazed commercial building.
	** NOTE TO SPECIFIER ** Delete coating configuration options and glass thickness options not required. See manufacturer's website for more detailed information.
			2.	Clear Coating Configuration: Energy Advantage Outer Lite (No. 2 surface); Optifloat Clear Inner Lite.
				a.	Glass Thickness: 3/16 inch (5 mm). SHGC: 0.63. Shading Coefficient: 0.73.
				b.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.62. Shading Coefficient: 0.71.
				c.	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.59. Shading Coefficient: 0.67.
			3.	Clear Coating Configuration: Energy Advantage Outer Lite (No. 2 surface); Energy Advantage Inner Lite (No. 4 surface).
				a.	Glass Thickness: 3/16 inch (5 mm). SHGC: 0.59. Shading Coefficient: 0.68.
				b.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.58. Shading Coefficient: 0.66.
				c.	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.54. Shading Coefficient: 0.62.
			4.	Clear Coating Configuration: Double Silver Sputter Coat Low-e Outer Lite ( No. 2 surface) and Energy Advantage Inner Lite (No. 4 surface).
				a.	Glass Thickness: 3/16 inch (5 mm). SHGC: 0.36. Shading Coefficient: 0.42.
				b.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.36. Shading Coefficient: 0.41.
				c.	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.35. Shading Coefficient: 0.40.
			5.	Clear Coating Configuration: Triple Silver Sputter Coat Low-e Outer Lite (No. 2 surface) and Energy Advantage Inner Lite (No. 4 surface).
				a.	Glass Thickness: 3/16 inch (5 mm). SHGC: 0.26. Shading Coefficient: 0.30.
				b.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.26. Shading Coefficient: 0.30.
				c.	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.26. Shading Coefficient: 0.30.
			6.	Clear Coating Configuration: Energy Advantage Optiwhite Outer Lite (No. 2 surface) and Optiwhite ultra clear low iron Inner Lite.
				a.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.70. Shading Coefficient: 0.81.
			7.	Clear Coating Configuration: Energy Advantage Optiwhite Outer Lite (No. 2 surface) and Energy Advantage Optiwhite Inner Lite (No. 4 surface).
				a.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.66. Shading Coefficient: 0.76.
			8.	Clear Coating Configuration: Double Silver Sputter Coat Low-e Outer Lite (No. 2 surface) and Energy Advantage Optiwhite Inner Lite (No. 4 surface).
				a.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.37. Shading Coefficient: 0.42.
			9.	Clear Coating Configuration: Triple Silver Sputter Coat Low-e Outer Lite (No. 2 surface) and Energy Advantage Optiwhite Inner Lite (No. 4 surface).
				a.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.26. Shading Coefficient: 0.30.
			10.	Clear Coating Configuration: Solar-E (No. 2 surface) outer lite; Energy Advantage Low-e (No. 4 surface) inner lite.
				a.	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.41. Shading Coefficient: 0.47.
				b.	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.40. Shading Coefficient: 0.45.
			11.	Coating Configuration: Solar-E Plus (No. 2 surface) outer lite; Energy Advantage Low-e (No. 4 surface) inner lite.
	** NOTE TO SPECIFIER ** Delete tint and glass thickness options not required.
				a.	Tint: Blue-Green.
					1)	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.27. Shading Coef.: 0.31.
					2)	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.24. Shading Coef.: 0.38.
				b.	Tint: Evergreen.
					1)	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.22. Shading Coef.: 0.25.
					2)	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.19. Shading Coef.: 0.22.
				c.	Tint: Graphite Blue.
					1)	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.29. Shading Coef.: 0.34.
					2)	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.26. Shading Coef.: 0.29.
				d.	Tint: Arctic Blue.
					1)	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.21. Shading Coef.: 0.25.
					2)	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.19. Shading Coef.: 0.22.
				e.	Tint: Grey.
					1)	Glass Thickness: 1/4 inch (6 mm). SHGC: 0.23. Shading Coef.: 0.26.
					2)	Glass Thickness: 5/16 inch (8 mm). SHGC: 0.20. Shading Coef.: 0.23.
			12.	Coating Configuration: Eclipse Advantage (No. 2 surface) outer lite; Energy Advantage Low-e (No. 4 surface) inner lite. Glass Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Delete tint and glass thickness options not required.
				a.	Tint: Clear. SHGC: 0.51. Shading Coefficient: 0.58.
				b.	Tint: Blue-Green. SHGC: 0.35. Shading Coefficient: 0.40.
				c.	Tint: Evergreen. SHGC: 0.26. Shading Coefficient: 0.30.
				d.	Tint: Arctic Blue. SHGC: 0.26. Shading Coefficient: 0.30.
				e.	Tint: Bronze. SHGC: 0.34. Shading Coefficient: 0.39.
				f.	Tint: Grey. SHGC: 0.30. Shading Coefficient: 0.35.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.13	TINTED INSULATING GLASS UNITS WITH SOLAR CONTROL LOW-E COATINGS
	** NOTE TO SPECIFIER ** Delete basis of design options not required.
		A.	Basis of Design: Energy Select 20 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only. Combines triple-silver low-e coating with array of tinted glass substrates yielding the lowest solar heat gain coefficient possible. Exterior use only.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened options. Delete options not required.
			1.	Laminated.
			2.	Tempered.
			3.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			4.	Glazing Thickness: 1/4 inch (6 mm); standard.
			5.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard
			6.	Outboard Glass Lite Coating Position: Surface 2.
	** NOTE TO SPECIFIER ** Delete coating options not required.
				a.	Energy Select 20 Pure Grey: SHGC: 0.20. Light to Solar Gain: 1.58
				b.	Energy Select 20 Majestic Grey: SHGC: 0.24. Light to Solar Gain: 1.91
				c.	Energy Select 20 Pure Bronze: SHGC: 0.21. Light to Solar Gain: 1.77
				d.	Energy Select 20 Forest Green: SHGC: 0.23. Light to Solar Gain: 1.99
			7.	Inboard Glass Lite: Clear glass. No coating.
		B.	Basis of Design: Energy Select 25 as manufactured by AGC Glass North America and fabricated by GGI. Exterior use only. Provides more options when designing to meet the most challenging energy code requirements.
	** NOTE TO SPECIFIER ** Laminated, tempered and heat strengthened options. Delete options not required.
			1.	Laminated.
			2.	Tempered.
			3.	Heat strengthened.
	** NOTE TO SPECIFIER ** Glazing thicknesses of 5/16 and 3/8 inch (8 and 10 mm) are available. Contact manufacturer for more information.
			4.	Glazing Thickness: 1/4 inch (6 mm); standard.
			5.	Overall Insulating Unit Thickness: 1 inch OA (25 mm) 1/4 inch (6 mm) -1/2 inch (13 mm) -1/4 inch (6 mm); standard
			6.	Outboard Glass Lite Coating Position: Surface 2.
	** NOTE TO SPECIFIER ** Delete coating options not required.
				a.	Energy Select 25 Pure Grey: SHGC: 0.25. Light to Solar Gain: 1.40
				b.	Energy Select 25 Majestic Grey: SHGC: 0.29. Light to Solar Gain: 1.65
				c.	Energy Select 25 Pure Bronze: SHGC: 0.27. Light to Solar Gain: 1.47
				d.	Energy Select 25 Forest Green: SHGC: 0.26. Light to Solar Gain: 1.87
			7.	Inboard Glass Lite: Clear glass. No coating.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.14	INSULATING GLASS
		A.	Standards Compliance: ASTM E2188, ASTM E2189, and ASTM E2190.
		B.	Basis of Design: Insulated Glass as manufactured by GGI.
	** NOTE TO SPECIFIER ** Delete insulating glass unit option not required.
			1.	Insulating Glass Units: Double pane insulating glass units.
			2.	Insulating Glass Units: Triple insulating glass units.
			3.	Overall Thickness: Overall thickness ranges from 3/4 to 2-1/4 inch (19 to 57 mm).
			4.	Overall Thickness: ________.
			5.	Dual sealed units for commercial applications.
			6.	Super Spacer T-Spacer Warm Edge Technology. Flexible silicone spacer, with pressure sensitive acrylic adhesive, and multi-layer vapor barrier.
			7.	Black primary and secondary sealants.
			8.	Secondary silicone seal suitable for structural glazing.
	** NOTE TO SPECIFIER ** Enhance glass surface protection is optional. It can be added to the No. 1 and or No. 4 surface of any insulating glass unit. Delete options not required.
			9.	Enhance Glass Surface Protection: Glazing surface No.1
			10.	Enhance Glass Surface Protection: Glazing surface No.4
	** NOTE TO SPECIFIER ** Delete gas fill option not required.
			11.	Gas Fill: Air.
			12.	Gas Fill: Argon.
	** NOTE TO SPECIFIER ** Minimum Size: 14 x 14 inches (356 to 356 mm.). Maximum Size: 106 x 157 inches (2692 x 6528 mm).
			13.	Size: As dimensioned in the Drawings.
			14.	Size: As determined by the Architect.
			15.	Size (WxH): ______ inch (______ mm).
	** NOTE TO SPECIFIER ** Delete delete Lew-E glass option and subsequent options not required.
			16.	Low-e Glass: Energy Select coated high performance.
				a.	Energy Select 23: Clear. VLT: 50 percent. SHGC: 0.23 LSG: 2.16.
				b.	Energy Select 28: Clear. VLT: 62 percent. SHGC: 0.28 LSG: 2.18.
				c.	Energy Select 31: Clear. VLT: 62 percent. SHGC: 0.31 LSG: 2.01.
				d.	Energy Select 36: Clear. VLT: 65 percent. SHGC: 0.36 LSG: 1.79.
				e.	Energy Select 40: Clear. VLT: 69 percent. SHGC: 0.39 LSG: 1.79.
				f.	Energy Select R42: Clear. VLT: 62 percent. SHGC: 0.42 LSG: 1.46.
				g.	Energy Select 73: Clear. VLT: 73 percent. SHGC: 0.69 LSG: 1.06.
				h.	Energy Select 20: Tinted. VLT: 46 percent. SHGC: 0.23 LSG: 1.99.
				i.	Energy Select 25: Tinted. VLT: 48 percent. SHGC: 0.26 LSG: 1.87.
	** NOTE TO SPECIFIER ** Applies to double pane units. Delete if not required. Values vary depending on nominal glass thickness. See manufacturer's website or contact manufacturer for more detailed information.
			17.	Low-e Glass: Pyrolytic Low-e hard-coated surface 2, and surface 4 as manufactured by Pilkington.
				a.	Pilkington Energy Advantage: Outboard lite surface 2. Pilkington Energy Advantage: Inboard lite surface 4.
				b.	Double Silver Sputter Coat Low-e: Outboard lite surface 2. Pilkington Energy Advantage: Inboard lite surface 4.
				c.	Triple Silver Sputter Coat Low-e: Outboard lite surface 2. Pilkington Energy Advantage: Inboard lite surface 4.
				d.	Pilkington Energy Advantage Optiwhite: Outboard lite surface 2. Pilkington Optiwhite Low Iron: Inboard lite surface 4.
				e.	Pilkington Energy Advantage Optiwhite: Outboard lite surface 2. Pilkington Energy Advantage Optiwhite: Inboard lite surface 4.
				f.	Pilkington Energy Advantage Optiwhite: Outboard lite surface 2. Pilkington Energy Advantage Optiwhite Inboard Lite: Surface 4.
				g.	Triple Silver Sputter Coat Low-e: Outboard lite surface 2. Pilkington Energy Advantage Optiwhite: Inboard lite surface 4.
				h.	Pilkington Solar-E Coating: Outboard lite surface 2. Pilkington Energy Advantage Low-e: Inboard lite surface 4.
				i.	Pilkington Solar-E Plus Coating: Outboard lite surface 2. Pilkington Energy Advantage Low-e Coating: Inboard lite surface 4.
				j.	Pilkington Eclipse Advantage Coating: Outboard lite surface 2. Pilkington Energy Advantage Low-e Coating: Inboard lite surface 4.
	** NOTE TO SPECIFIER ** Delete glass options not required or delete entire paragraph is not required.
		C.	Glass Options:
			1.	Annealed.
			2.	Heat-treated.
			3.	Offset units, shapes and arches. As detailed on the Drawings.
			4.	Oversize tempered and insulating capabilities.
	** NOTE TO SPECIFIER ** Oversize tempered and insulating capabilities. Contact fabricator for more detailed information.
			5.	Tempered.
			6.	Direct-to Glass Printing.
			7.	Anti-Reflective.
			8.	Clear.
			9.	Ultra-Clear Low-Iron.
			10.	Tinted.
			11.	Fire-Rated.
			12.	Insulating glass units with solar control low-e coatings.
			13.	Tinted insulating glass units with solar control low-e coatings.
			14.	Laminated.
			15.	Patterned.
			16.	Reflective.
			17.	Satin-Etched.
	z** NOTE TO SPECIFIER ** Delete article if not required.
	2.15	MIRRORS
	** NOTE TO SPECIFIER ** Delete basis of design options not required.
		A.	Basis or Design: Antique Mirror as fabricated by GGI.
			1.	Select materials and provide supports to limit mirror material deflection to 1/200, or to the flexure limit of glass, with full recovery of glazing materials, whichever is less.
			2.	Glass Type: Antique Mirror. Clear annealed float glass per ASTM C1036.
				a.	Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Maximum Size: 48 x 94-1/2 inches (1219 x 2400 mm). Delete size options not required.
				b.	Size: As dimensioned in the Drawings.
				c.	Size: As determined by the Architect.
				d.	Size (WxH): ______ inch (______ mm).
	** NOTE TO SPECIFIER ** Delete pattern and edges options not required.
				e.	Pattern: Bianco E Nero.
				f.	Pattern: Cometa.
				g.	Pattern: Golden Antique.
				h.	Pattern: Grigio Argento.
				i.	Pattern: Luna.
				j.	Pattern: Meteora.
				k.	Pattern: Policromo.
				l.	Pattern: Saturno.
				m.	Edges: Chamfered arris.
				n.	Edges: Flat polished.
				o.	Edges: Pencil polished
				p.	Edges: Flat ground
				q.	Edges: Seamed.
		B.	Basis or Design: Clear Mirror as fabricated by GGI.
			1.	Select materials and provide supports to limit mirror material deflection to 1/200, or to the flexure limit of glass, with full recovery of glazing
			2.	Glass Type: Clear, annealed float glass per ASTM C1036.
	** NOTE TO SPECIFIER ** Delete thickness option not required.
				a.	Thickness: 1/8 inch (3 mm).
				b.	Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Contact manufacturer for sizes.
				c.	Size: As dimensioned in the Drawings.
				d.	Size: As determined by the Architect.
				e.	Size (WxH): ______ inch (______ mm).
		C.	Basis or Design: Ultra Clear Low Iron Mirror as fabricated by GGI.
			1.	Mirror Design Criteria: Select materials and provide supports to limit mirror material deflection to 1/200, or to the flexure limit of glass, with full recovery of glazing
			2.	Glass Type: Ultra clear low iron float glass.
				a.	Thickness: 1/4 inch (6.4 mm).
	** NOTE TO SPECIFIER ** Maximum Size: 84 x 120 inches (2134 x 3048 mm). Delete size options not required.
				b.	Size: As dimensioned in the Drawings.
				c.	Size: As determined by the Architect.
				d.	Size (WxH): ______ inch (______ mm).
		D.	Basis or Design: Ultra Clear Low Iron Satin Mirror as fabricated by GGI.
			1.	The look of silvered stainless steel. When beveled or grooved, the surface becomes a reflective mirror.
			2.	Mirror Design Criteria: Select materials and provide supports to limit mirror material deflection to 1/200, or to the flexure limit of glass, with full recovery of glazing.
				a.	Glass Type: Ultra clear low iron float glass.
				b.	Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Maximum Size: 88-1/2 x 126 inches (2248 x 3200 mm). Delete size options not required.
				c.	Size: As dimensioned in the Drawings.
				d.	Size: As determined by the Architect.
				e.	Size (WxH): ______ inch (______ mm).
		E.	Basis or Design: One-Way Mirror as fabricated by GGI.
			1.	One-way vision glass creates an opaque mirror-like visual barrier between subjects while allowing observers to see through the glass.
			2.	Glass Type: Mirropane on Grey Glass as manufactured by Pilkington
	** NOTE TO SPECIFIER ** Maximum Size: 96 x 130 inches (2438 x 3302). Delete size options not required.
				a.	Size: As dimensioned in the Drawings.
				b.	Size: As determined by the Architect.
				c.	Size (WxH): ______ inch (______ mm).
		F.	Basis or Design: Tinted Mirror as fabricated by GGI.
			1.	Mirror Design Criteria: Select materials and provide supports to limit mirror material deflection to 1/200, or to the flexure limit of glass, with full recovery of glazing
			2.	Glass Type: Tinted, ultra-clear low iron float glass.
				a.	Thickness: 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Maximum Size: 84 x 120 inches (2134 x 3048 mm). Delete size options not required.
				b.	Size: As dimensioned in the Drawings.
				c.	Size: As determined by the Architect.
				d.	Size (WxH): ______ inch (______ mm).
	** NOTE TO SPECIFIER ** Delete tint color options not required.
				e.	Tint Color: Black
				f.	Tint Color: Bronze
				g.	Tint Color: Gold
				h.	Tint Color: Grey
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.16	PATTERNED GLASS
		A.	Basis of Design Patterned Glass as fabricated by GGI
			1.	Glass Materials: Float Glass unless specified otherwise
				a.	Annealed: ASTM C1036, Type I - Transparent Flat, Class 1 - Clear, Quality-Q3.
				b.	Heat-Strengthened and Fully Tempered Types: ASTM C1048, Kind HS and FT.
				c.	Tempered Safety Glass: Complies with ANSI Z97.1 and 16 CFR 1201 criteria.
				d.	Patterned Glass: ASTM C1036, Type II - Patterned Flat Glass, Quality-Q5, Form 3 - Patterned glass, color and performance characteristics as indicated.
			2.	Glazing Units: Type G-11 - Patterned Glazing: Rolled or textured glass; translucent, showing shadows but not form.
				a.	Applications: Locations as indicated on drawings.
				b.	Finish: F1 - Patterned one side; ASTM C1036.
				c.	Pattern: P1 - Linear; ASTM C1036.
				d.	Style: As indicated on drawings.
				e.	Tint: Clear.
	** NOTE TO SPECIFIER ** Delete glass pattern and fabrication and thickness options not required. Some patterns may not be temperable in 1/8 inch (3 mm) thicknesses. Verify with GGI,
				f.	Glass Patterns: Altdeutsch K: A freeform pattern also known as Glacier or Winterlake.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 5/32 inch (5 mm).
				g.	Glass Patterns: Antique: Manufactured by Schott in Germany with ultra-clear, low-iron glass with a vertical draw production process. Also known as German New Antique or GNA. The 3 mm product ranges from 0.098 to 0.118 inches (2.5 to 3 mm) in thickness and is non-temperable.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Insulated.
					6)	Thickness: 1/8 inch (3 mm).
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
				h.	Glass Patterns: Aqualite: A mottled surface obscures views with a classic pattern similar to Aquatex and Spraylite.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 3/16 inch (5 mm).
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
				i.	Glass Patterns: Artico:
					1)	Fabrication: Laminated.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 1/8 inch (3 mm).
				j.	Glass Patterns: Autumn:
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 5/32 inch (4 mm).
					7)	Thickness: 1/4 inch (6 mm).
				k.	Glass Patterns: Bamboo: A classic, rolled tropical pattern.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 3/16 inch (5 mm).
					7)	Thickness: 3/8 inch (10 mm).
				l.	Glass Patterns: Bubbles: Reminiscent of the surface of foam or water drops on a glass.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Tempered.
					5)	Fabrication: Insulated.
					6)	Thickness: 1/8 inch (3 mm).
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
				m.	Glass Patterns: Cast: A rolled pattern with a free-flowing, organic pattern.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 1/4 inch (6 mm).
					7)	Thickness: 3/8 inch (10 mm).
				n.	Glass Patterns: Chinchilla: A classic European design that creates a surface of soft fur.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 5/32 inch (4 mm).
				o.	Glass Patterns: Cotswold: A deeply textured pattern resembling tree bark.
					1)	Fabrication: Tempered.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 5/32 inch (4 mm).
					5)	Thickness: 1/4 inch (6 mm).
				p.	Glass Patterns: Cross Reeded Small.
					1)	Fabrication: Laminated.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 5/32 inch (4 mm).
				q.	Glass Patterns: Delta Frost: Thick layers of frost pattern are created with sandblasting for additional obscurity.
					1)	Fabrication: Laminated.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 5/32 inch (4 mm).
				r.	Glass Patterns: Diamond Cast Wire: A rough texture with 1/4" wire mesh to ensure privacy.
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 1/4 inch (6 mm).
				s.	Glass Patterns: Everglade: Lush vines swirl over a pebbled surface.
					1)	Fabrication: Laminated.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 5/32 inch (4 mm).
					6)	Thickness: 1/4 inch (6 mm).
				t.	Glass Patterns: Flemish: The look of hand-blown glass without the seeds and bubble for a slight distortion in clear glass. Also known as English Flemish.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 5/32 inch (4 mm).
					6)	Thickness: 1/4 inch (6 mm).
				u.	Glass Patterns: Georgian Stipolite Wire.
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 1/4 inch (6 mm). Size: 48 x 72 inch (1219 x 1829 mm)
				v.	Glass Patterns: Glue Chip: Glue is applied to glass and as it dries and contracts, it creates a distinctive and totally unique design. Available in Single and Double (process is applied to same surface twice).
					1)	Fabrication: Back painting.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 1/8 inch (3 mm).
					7)	Thickness: 3/16 inch (5 mm).
					8)	Thickness: 3/8 inch (10 mm).
				w.	Glass Patterns: Master Carre: A high-end, rolled glass with substantive, widely spaced dot grid for visual separation with plenty of light transmission.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Thickness: 1/8 inch (3 mm).
					8)	Thickness: 1/4 inch (6 mm).
					9)	Thickness: 3/8 inch (10 mm).
				x.	Glass Patterns: Master Ligne: A high-end, rolled glass with uninterrupted vertical lines that diffuse light and offer privacy.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Thickness: 5/32 inch (4 mm).
					8)	Thickness: 1/4 inch (6 mm).
				y.	Glass Patterns: Master Point: A collection of fine lines diffuses light and offers privacy.
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 5/32 inch (4 mm).
				z.	Glass Patterns: Master Ray: A grid of short, horizontal lines creates privacy and allows for plenty of light transmission.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Thickness: 5/32 inch (4 mm).
					8)	Thickness: 1/4 inch (6 mm).
				aa.	Glass Patterns: Monumental: Similar to Aqualite, but with deeper patterning of organic forms for a more distinctive appearance.
					1)	Fabrication: Laminated.
					2)	Fabrication: Tempered.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Insulated.
					5)	Thickness: 5/32 inch (4 mm).
					6)	Thickness: 1/4 inch (6 mm).
				ab.	Glass Patterns: Morisco:
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 5/32 inch (4 mm).
				ac.	Glass Patterns: Rain: Patterned after water cascading over a surface.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Enhance single or double sided surface protection.
					6)	Fabrication: Insulated.
					7)	Thickness: 1/8 inch (3 mm).
					8)	Thickness: 5/32 inch (4 mm).
					9)	Thickness: 3/16 inch (5 mm).
					10)	Thickness: 1/4 inch (6 mm).
					11)	Thickness: 3/8 inch (10 mm).
				ad.	Glass Patterns: Reeded: Reeds spaced 1/2" apart create subtle distortion for limited obscurity and lots of light. Available in low-iron as well.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Enhance single or double sided surface protection.
					6)	Fabrication: Insulated.
					7)	Thickness: 5/32 inch (4 mm).
					8)	Thickness: 1/4 inch (6 mm).
					9)	Thickness: 3/8 inch (10 mm).
				ae.	Glass Patterns: Seedy Import:
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 5/32 inch (4 mm).
				af.	Glass Patterns: Seedy Marine:
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
					4)	Thickness: 1/8 inch (3 mm).
				ag.	Glass Patterns: Soft Hammered:
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
	** NOTE TO SPECIFIER ** contact manufacturer for thicknesses and sizes.
					6)	Thickness (inch/mm): ________.
					7)	Size (inch/mm): ________.
				ah.	Glass Patterns: Stipolite:
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painting.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Insulated.
					6)	Thickness: 3/32 inch (2 mm).
					7)	Thickness: 1/8 inch (3 mm).
					8)	Thickness: 5/32 inch (4 mm).
					9)	Thickness: 3/16 inch (5 mm).
					10)	Thickness: 1/4 inch (6 mm).
					11)	Thickness: 3/8 inch (10 mm).
				ai.	Glass Patterns: Taffeta:
					1)	Thickness: 5/32 inch (4 mm).
				aj.	Glass Patterns: Textured Flutes:
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 3/16 inch (5 mm).
					7)	Thickness: 3/8 inch (10 mm).
				ak.	Glass Patterns: Thin Ribbed:
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 5/32 inch (5 mm).
					7)	Thickness: 1/4 inch (6 mm).
				al.	Glass Patterns: Waterwave:
					1)	Fabrication: Laminated.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Insulated.
	** NOTE TO SPECIFIER ** contact manufacturer for thicknesses and sizes.
					4)	Thickness (inch/mm): ________.
					5)	Size (inch/mm): ________.
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.17	SATIN ETCHED GLASS
		A.	Basis of Design: Satin Etched Glass as fabricated by GGI. Patterns etched directly into glass. Does not wear down or degrade. Consistent smooth finish and appearance with no peeling or discoloration.
			1.	Float Glass: Base glazing unless specified otherwise.
				a.	Annealed: ASTM C1036, Type I - Transparent Flat, Class 1 - Clear, Quality-Q3
				b.	Heat-Strengthened, Tempered: ASTM C1048, Kind HS and FT.
				c.	Tempered Safety Glass: Complies with ANSI Z97.1 and 16 CFR 1201 criteria.
			2.	Glazing Units: Type G-17 - Satin etched glazing. Etched glass patterns as full-coverage or as discrete designs, applied to single side or to both sides.
				a.	Applications: Locations as indicated on drawings.
	** NOTE TO SPECIFIER ** Delete glass type and glass thickness options not required.
				b.	Glass Type: Clear Fully tempered, Heat Strengthened or Monolithic glass system.
					1)	Single-sided etched 1/4 inch (6 mm) thick. Light Transmission: 81 percent.
					2)	Single-sided etched 3/8 inch (9 mm) thick. Light Transmission: 80 percent.
					3)	Single-sided etched 1/2 inch (13 mm) thick. Light Transmission: 80 percent.
				c.	Glass Type: Ultra clear low iron Satin Etched Glass as manufactured by GGI.
					1)	Single-sided etched 1/4 inch (6 mm) thick. Light Transmission: 91 percent.
					2)	Single-sided etched 3/8 inch (9 mm) thick. Light Transmission: 90 percent.
					3)	Single-sided etched 1/2 inch (13 mm) thick. Light Transmission: 90 percent.
					4)	Two-sided etched 1/4 inch (6 mm) thick. Light Transmission: 81 percent.
					5)	Two-sided etched 3/8 inch (9 mm) thick. Light Transmission: 80 percent.
					6)	Two-sided etched 1/2 inch (13 mm) thick. Light Transmission: 80 percent.
					7)	Two-sided Cross fuzzy 1/2 inch (13 mm) thick. Light Transmission: 83 percent.
					8)	Two-sided Illusion lines 1/2 inch (13 mm) thick. Light Transmission: 83 percent.
					9)	Two-sided Venetian blinds 3/8 inch (9 mm) thick. Light Transmission: 83 percent.
					10)	Two-sided Venetian blinds 1/2 inch (13 mm) thick. Light Transmission: 83 percent.
					11)	Two-sided Wavy lines 3/8 inch (9 mm) thick. Light Transmission: 83 percent.
					12)	Two-sided Wavy lines 1/2 inch (13 mm) thick. Light Transmission: 83 percent.
	** NOTE TO SPECIFIER ** Delete either the one or two sided pattern options not required.
				d.	Glass Type: Patterned, One-Sided:
				e.	Glass Type: Patterned, Two-Sided: Ideal for vertical interior applications such as partitions and walls. Create a three-dimensional.
	** NOTE TO SPECIFIER ** Delete pattern options not required.
					1)	Pattern: Bamboo. Thickness: 1/4 inch (6 mm).
					2)	Pattern: Coral. Thickness: 1/4 inch (6 mm).
					3)	Pattern: Coral. Thickness: 3/8 inch (9 mm).
					4)	Pattern: Coral. Thickness: 1/2 inch (13 mm).
					5)	Pattern: Dots. Thickness: 1/4 inch (6 mm).
					6)	Pattern: Dots. Thickness: 3/8 inch (9 mm).
					7)	Pattern: Dots. Thickness: 1/2 inch (13 mm).
					8)	Pattern: Ice. Thickness: 1/4 inch (6 mm).
					9)	Pattern: Ice. Thickness: 3/8 inch (9 mm).
					10)	Pattern: Ice. Thickness: 1/2 inch (13 mm).
					11)	Pattern: Ice. Thickness: 1/4 inch (6 mm).
					12)	Pattern: Ice. Thickness: 3/8 inch (9 mm).
					13)	Pattern: Ice. Thickness: 1/2 inch (13 mm).
					14)	Pattern: Lines. Thickness: 1/4 inch (6 mm).
					15)	Pattern: Lines. Thickness: 3/8 inch (9 mm).
					16)	Pattern: Lines. Thickness: 1/2 inch (13 mm).
					17)	Pattern: Linen. Thickness: 1/4 inch (6 mm).
					18)	Pattern: Linen. Thickness: 3/8 inch (9 mm).
					19)	Pattern: Linen. Thickness: 1/2 inch (13 mm).
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.18	ULTRA CLEAR LOW IRON GLASS
		A.	Basis of Design: Low-Iron Glass as fabricated by GGI. Ultra-clear for the highest visible light transmission. Provides a virtually colorless aesthetic and the truest color rendering for back-painting and Alice Direct-to-Glass Printing. Excellent quality and clarity.
			1.	Thicknesses: Up to 3/4 inches (19 mm).
			2.	Ultra-Clear Low Iron Glazing Options:
	** NOTE TO SPECIFIER ** Delete delete glazing type paragraphs and options not required.
				a.	Glazing Type: Anti-Reflective 1-Sided:
					1)	Optical coating eliminates 99 percent of reflection, while providing very high light transmission. To be laminated to another piece of anti-reflective glass to achieve full effect.
					2)	Fabrication: Alice Direct-to-Glass Printing.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
				b.	Glazing Type: Anti-Reflective 2-Sided:
					1)	Optical coating eliminates 99 percent of reflection, while providing very high light transmission.
					2)	Fabrication: Alice Direct-to-Glass Printing.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
					9)	Thickness: 1/2 inch (13 mm).
				c.	Glazing Type: Anti-Reflective Laminated:
					1)	Eliminates 99 percent of reflection, while providing very high light transmission. Two laminated glass pieces, with coating on both exterior surfaces.
					2)	Thickness: 3/16 inch (5 mm).
					3)	Thickness: 1/2 inch (13 mm).
				d.	Glazing Type: Antique: Manufactured by Schott in Germany with ultra-clear, low-iron glass Also known as German New Antique or GNA. Non-temperable.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Enhance single or double sided surface protection.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Insulated.
					6)	Thickness: 1/8 inch (3 mm).
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
				e.	Glazing Type: Low-Iron.
					1)	Fabrication: Alice Direct-to-Glass Printing.
					2)	Fabrication: Back painted.
					3)	Fabrication: Enhance single or double sided surface protection.
					4)	Fabrication: Laminated.
					5)	Fabrication: Tempered.
					6)	Fabrication: Insulated.
					7)	Product: Cut-to-size.
	** NOTE TO SPECIFIER ** contact manufacturer for sizes.
					8)	Thickness: 1/4 inch (6 mm).
					9)	Thickness: 3/8 inch (10 mm).
					10)	Thickness: 1/2 inch (13 mm).
				f.	Glazing Type: Ultra clear low iron Crystal Light.
					1)	A softer finish than traditional satin etched glass on a low-iron glass substrate.
					2)	Fabrication: Alice Direct-to-Glass Printing.
					3)	Fabrication: Back painted.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Laminated.
					6)	Fabrication: Tempered.
					7)	Fabrication: Insulated.
					8)	Thickness: 1/4 inch (6 mm).
					9)	Thickness: 3/8 inch (10 mm).
					10)	Thickness: 1/2 inch (13 mm).
				g.	Glazing Type: Ultra clear low iron Mirror.
					1)	Thickness: 1/4 inch (6 mm).
				h.	Glazing Type: Ultra clear low iron Satin Etch:
					1)	Virtually colorless glass, with etched surface on one or both sides for a level of translucence that allows the sharing of light between spaces without compromising privacy.
					2)	Fabrication: Alice Direct-to-Glass Printing. Only on one-sided.
					3)	Fabrication: Laminated. Only on one-sided.
					4)	Fabrication: Tempered. Only on one-sided.
					5)	Fabrication: Enhance single or double sided surface protection.
					6)	Fabrication: Insulated.
					7)	Thickness: 1/4 inch (6 mm).
					8)	Thickness: 3/8 inch (10 mm).
					9)	Thickness: 1/2 inch (13 mm).
				i.	Glazing Type: Ultra clear low iron Satin Mirror.
					1)	The look of silvered stainless steel. When beveled or grooved, the surface becomes a reflective mirror.
					2)	Thickness: 1/4 inch (6 mm).
				j.	Glazing Type: Reeded:
					1)	Reeds spaced 1/2 inches (13 mm) apart create subtle distortion for limited obscurity and lots of light. Available in low-iron as well.
					2)	Fabrication: Alice Direct-to-Glass Printing.
					3)	Fabrication: Laminated.
					4)	Fabrication: Tempered.
					5)	Fabrication: Enhance single or double sided surface protection.
					6)	Fabrication: Insulated.
					7)	Thickness: 5/32 inch (4 mm).
					8)	Thickness: 1/4 inch (6 mm).
					9)	Thickness: 3/8 inch (10 mm).
				k.	Glazing Type: Thin Ribbed:
					1)	Ribs are 1/8 inch (3 mm) wide and run parallel to the long dimension.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 5/32 inch (4 mm).
					7)	Thickness: 1/4 inch (1/4 mm).
				l.	Glazing Type: Venetian Blinds: Low-Iron Satin Etched Glass.
					1)	Two-sided offset line pattern for added interest, allowing designers to choose which side of the space should be very private and the other with just a hint of privacy.
					2)	Fabrication: Laminated.
					3)	Fabrication: Tempered.
					4)	Fabrication: Enhance single or double sided surface protection.
					5)	Fabrication: Insulated.
					6)	Thickness: 3/8 inch (10 mm).
					7)	Thickness: 1/2 inch (13 mm).
	** NOTE TO SPECIFIER ** Delete article if not required.
	2.19	WIRE GLASS
		A.	Basis or Design: New Wire Glass as fabricated by GGI:
			1.	Interior applications. Fire-rating is not affected by which surface has the film.
			2.	Meets impact safety standards ANSI Z97.1 Class A.
	** NOTE TO SPECIFIER ** Delete fire rating options not required.
			3.	Fire Ratings: UL certifications for 20 minutes.
			4.	Fire Ratings: UL certifications for 45, minutes.
			5.	Fire Ratings: UL certifications for 60 minutes.
			6.	Fire Ratings: UL certifications for 90 minutes.
			7.	Glass: Type G-10 - Safety Wired Glazing: Flat glass with embedded wire mesh.
				a.	Applications: Locations as indicated on drawings.
				b.	Tint: Clear.
				c.	Glass Type: Annealed.
				d.	Thickness: 1/4 inch (6 mm) nominal.
				e.	Weight: 3.85 lbs. per sq ft (18.8 kg per sq m).
				f.	Visible Light Transmittance: Approximately 78 percent.
	** NOTE TO SPECIFIER ** Delete form and mesh options not required.
				g.	Form: No. 1 - Polished both sides.
				h.	Form: No. 2 - Patterned Surfaces per ASTM C1036.
				i.	Mesh: M1 - Diamond.
				j.	Mesh: M2 - Georgian, square, per ASTM C1036.
			8.	Must be glazed into appropriate fire-rated framing.
			9.	Appropriate glazing compounds, such as Fiberfrax tape, closed cell PVC and Pemko FG300S45, must be used.
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates have been properly constructed and prepared.
		B.	If substrate preparation is the responsibility of another installer, notify Architect in writing of unsatisfactory preparation before proceeding.
	3.2	PREPARATION
		A.	Clean surfaces thoroughly prior to installation.
		B.	Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.
	3.4	FIELD QUALITY CONTROL
		A.	Field Inspection: Coordinate field inspection in accordance with appropriate sections in Division 01.
	** NOTE TO SPECIFIER ** Include if manufacturer provides field quality control with onsite personnel for instruction or supervision of product installation, application, erection or construction. Delete if not required.
		B.	Manufacturer's Services: Coordinate manufacturer's services in accordance with appropriate sections in Division 01.
	3.5	CLEANING AND PROTECTION
		A.	Clean products in accordance with the manufacturers recommendations.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	END OF SECTION