MasterFormat: 04

Download this Static Control Flooring Specification for   WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

	SECTION09660
	STATIC CONTROL FLOORING
	Copyright 2010 - 2012 ARCAT, Inc. - All rights reserved
	** NOTE TO SPECIFIER ** StaticWorx, Inc.; ESD and static control flooring. This section is based on the products of StaticWorx, Inc. P. O. Box 590069 Newton Centre, MA 02459 Phone: 617-923-2000 Fax: 617-923-2009 Web: http://www.staticworx.com Email: info@staticworx.com StaticWorx, Inc. manufactures, installs and services the highest quality conductive and static dissipative flooring available today. We offer a full range of ESD carpet, vinyl and rubber tile, as well as broadloom carpet, conductive epoxy, static control wax and paint, and static control floor runners and floor mats. All StaticWorx® products are made in ISO-9000 certified factories and undergo rigorous testing by independent laboratories prior to shipment. For clients who prefer a worry-free project, we provide turnkey flooring solutions: First, we help you choose the best floor for your specific application. Then we match your project with our best flooring installation team, we oversee the installation, and test the electrical properties to be sure the floor meets your specifications.
	PART 1	GENERAL
	1.1	SECTION INCLUDES
	** NOTE TO SPECIFIER ** Delete items below not required for project.
		A.	Monolithic, seamless, static control floor toppings.
			1.	Poured epoxy floor topping system.
			2.	High build epoxy floor topping system.
			3.	Quartz aggregate impregnated epoxy floor concrete topping system.
		B.	Rubber static control flooring.
			1.	Heavy-duty rubber tile floor system.
			2.	Heavy-duty rubber sheet flooring system.
			3.	Medium-duty, textured rubber tile floor system.
			4.	Medium-duty, textured rubber sheet flooring system.
			5.	Light-duty, rubber tile floor system.
			6.	Light-duty, rubber sheet flooring system.
			7.	Recycled rubber tile floor system.
			8.	Recycled rubber sheet flooring system.
		C.	Static control vinyl flooring.
			1.	USA manufactured vinyl floor tiling.
			2.	USA Manufactured vinyl sheet flooring.
			3.	Phthalate-free vinyl floor tiling.
			4.	Phthalate-free vinyl sheet flooring.
			5.	Premium sheet vinyl flooring.
		D.	Static control carpeting.
			1.	Carpet tiling.
			2.	Sheet carpeting.
	1.2	RELATED SECTIONS
	** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
		A.	Section 03 30 00 - Cast-in-Place Concrete.
		B.	Section 06 10 00 - Rough Carpentry.
		C.	Section 07 26 00 - Vapor Retarders.
		D.	Section 09 65 13 - Resilient Base and Accessories.
		E.	Section 09 69 19 - Stringerless Access Flooring.
	1.3	REFERENCES
	** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
		A.	ASTM International (ASTM):
			1.	ASTM C 413 - Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
			2.	ASTM C 579 - Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
			3.	ASTM D 257 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials.
			4.	ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
			5.	ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.
			6.	ASTM D 1044 - Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion.
			7.	ASTM D 2240 - Standard Test Method for Rubber Property Durometer Hardness.
			8.	ASTM D 3389 - Standard test method for coated fabrics abrasion resistance (rotary platform, double-head abrader).
			9.	ASTM D 2047 - Standard test method for static coefficient of friction of polish-coated floor surfaces as measured by the James Machine.
			10.	ASTM E 648 Standard test method for critical radiant flux of floor covering systems using a radiant heat energy source.
			11.	ASTM E 662 - Standard test method for specific optical density of smoke generated by solid materials.
			12.	ASTM E 84 - Standard test method for surface burning characteristics of building materials.
			13.	ASTM E 831 - Standard Test Method for Gas Content of Cable and Capacitor Oils.
			14.	ASTM F 1344 - Standard specification for rubber floor tile.
			15.	ASTM 1860 - Standard specification for rubber sheet floor covering with backing.
			16.	ASTM 1859 - Standard specification for rubber sheet floor covering without backing.
			17.	ASTM F 2169 - Standard specification for resilient stair treads.
			18.	ASTM F 1861 - Standard specification for resilient wall base.
			19.	ASTM F 710 - Standard practice for preparing concrete floors to receive resilient flooring.
			20.	ASTM F 150 - Standard test method for electrical resistance of conductive and static dissipative resilient flooring.
			21.	ASTM F 2170 - Standard test method for determining relative humidity in concrete floor slabs using in situ probes.
			22.	ASTM F 1869 - Standard test method for measuring moisture vapor emission rate of concrete subfloor using anhydrous calcium chloride.
		B.	ANSI/ESD S7.1 - Floor Materials - Resistive Characterization of Materials
		C.	ANSI/ESD S20.20 - Electrostatic Discharge Standard
		D.	ANSI/ESD STM 97.1 - Floor Materials and Footwear - Resistance in Combination with a Person
		E.	ANSI/ESD STM 97.2 - Floor Materials and Footwear Voltage measurement in Combination with a person.
		F.	FTM 4046 101 - Static Decay.
		G.	National Fire Protection Association (NFPA):
			1.	NFPA 253 - Test method for critical radiant flux of floor covering systems using a radiant energy source.
			2.	NFPA 258 - Test method for specific density of smoke generated by solid materials.
	1.4	SUBMITTALS
		A.	Submit under provisions of Section 01 30 00 - Administrative Requirements.
		B.	Product Data: Provide detailed data on Manufacturers catalog data on each product to be used including but not limited to the following information:
			1.	Preparation instructions and recommendations.
			2.	Storage and handling requirements and recommendations.
			3.	Installation methods.
			4.	Maintenance recommendations.
	** NOTE TO SPECIFIER ** Delete if not required.
		C.	Shop Drawings: Submit shop drawings indicating details of construction, perimeter conditions and seam locations.
	** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
		D.	Selection Samples: Submit two sets of samples or color charts showing all available colors, patterns, textures, and finishes.
		E.	Verification Samples: For each flooring system specified, two 6 inches (153 mm) square samples, representing colors, patterns, textures, and finishes to be installed.
		F.	Closeout Submittals: Submit three copies of the following:
			1.	Maintenance and Operation Data: Includes but not limited to the following:
				a.	Methods for maintaining installed products.
				b.	Precautions against cleaning materials and methods detrimental to finishes and performance.
			2.	Documentation of executed warranty as specified herein.
	** NOTE TO SPECIFIER ** Delete if not required.
		G.	Flame Spread Certification: Submit manufacturer's certification that resilient flooring furnished for areas indicated to comply with required flame spread rating has been tested and meets or exceeds indicated or required standard.
		H.	Performance: Submit results of manufacturer's recommended electrical testing and certification by authorized representative of flooring manufacturer, for each type of flooring installed.
	1.5	QUALITY ASSURANCE
	** NOTE TO SPECIFIER ** Add quality requirements if required. Delete if not required.
		A.	Manufacturer Qualifications:
			1.	Whenever possible, provide each type of resilient flooring and accessories as provided by a single manufacturer, including recommended primers, adhesives, sealants, finish accessories and leveling compounds.
			2.	Provide resilient flooring manufactured by a firm with a minimum of 10 years experience with resilient flooring of types equivalent to those required for project.
		B.	Installers Qualifications: Installer experienced, minimum of 3 years, to perform work of this section who has specialized in the installation of work similar to that required for this project and who is acceptable to the product manufacturer.
	** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
		C.	Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
			1.	Finish areas designated by Architect.
			2.	Do not proceed with remaining work until workmanship, color, sheen and finished appearance are approved by Architect.
	1.6	DELIVERY, STORAGE, AND HANDLING
		A.	Deliver materials to job site in sealed, undamaged containers with labels intact and legible, indicating the material name, date of manufacture and lot number.
		B.	Store products in manufacturer's unopened packaging until ready for installation.
		C.	Store materials in a dry secure area, where temperatures, away from exposure to the elements and other requirements are in accordance with manufacturer's recommendations.
		D.	Keep products away from open flames.
		E.	Flooring material and adhesive shall be acclimated to the installation area for a minimum of 48 hours prior to installation.
	** NOTE TO SPECIFIER ** Delete if not specifying tile products.
		F.	Store cartons of tile products flat and squarely on top of one another, not on edge.
	1.7	PROJECT CONDITIONS
		A.	Comply with manufacturer's recommendations for environmental conditions. Areas to receive flooring shall be clean, fully enclosed, weather tight with the permanent HVAC operational and other finish materials installed.
		B.	During installation period, provide uniform lighting at area of installation equivalent to finished project lighting. Prevent traffic from entering area where flooring is being installed or is curing.
	1.8	WARRANTY
	** NOTE TO SPECIFIER ** Delete warranty periods based on requirements of project and availability with products specified.
		A.	Warranty: Provide manufacturer's standard warranty, including the following:
	** NOTE TO SPECIFIER ** The following two paragraphs are for GroundWorx, and High Build Epoxy, and Aggregate Impregnated floor topping systems. Delete if not required.
			1.	Monolithic, seamless, static control floor toppings:
				a.	Defects in Material and Workmanship: Manufacturer's standard one year warranty.
				b.	Electrical Properties: Manufacturer's standard five year warranty.
			2.	Rubber static control flooring:
	** NOTE TO SPECIFIER ** The following two paragraphs are for rubber flooring systems. Delete if not required.
				a.	Defects in Material and Workmanship: Manufacturer's standard one year warranty.
				b.	Limited Wear Warranty: StaticWorx warrants for a period of five years that their ESD Rubber products will not wear in excess of less than .0035 inches wear per year prorated from the date of purchase.
	** NOTE TO SPECIFIER ** Delete option below not available with specified system or if not required.
				c.	Electrical Properties: Manufacturer's standard 10 year limited warranty.
				d.	Electrical Properties: Manufacturer's standard lifetime warranty.
			3.	Static control vinyl flooring: Tile:
				a.	Manufacturer's standard warranty for installed flooring, for period of 10 years from date of purchase for materials.
				b.	Manufacturer's standard warranty for the lifetime of the installed floor for electrical properties from the date of testing and certification by authorized representative of flooring manufacturer.
			4.	Static control carpeting: Manufacturer's standard ten year, non-transferrable warranty beginning from when the carpet is initially purchased.
	** NOTE TO SPECIFIER ** Modify the following Article as applicable to project requirements. Delete if not required.
	1.9	EXTRA MATERIALS
		A.	Deliver to Owner extra materials from same production run as products installed. Package products with protective covering and identify with descriptive labels. Comply with Division 1 closeout submittals requirements.
			1.	Quantity: Furnish quantity of flooring units equal to 2 percent of amount installed.
			2.	Delivery, Storage and Protection: Comply with Owner's requirements for delivery, storage and protection of extra materials.
	PART 2	PRODUCTS
	2.1	MANUFACTURERS
		A.	Acceptable Manufacturer: Staticworx, Inc., which is located at: P. O. Box 590069 ; Newton Centre, MA 02459; Tel: 617-923-2000; Fax: 617-923-2009 ; Email: request info; Web: www.Staticworx.com
	** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
		B.	Substitutions: Not permitted.
		C.	Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.2	MONOLITHIC, SEAMLESS STATIC CONTROL FLOOR TOPPINGS
	** NOTE TO SPECIFIER ** GroundWorx EC provides permanent conductivity can be applied over most flooring materials including concrete, wood and old tile. Consult with manufacturer literature for details of substrate compatibility. Recommended Applications: Electronic Assembly, Test, Repair and Handling, Data and Telephony Closets, BGA rework, Shipping, Receiving, Warehouses, Leased spaces, Pallet drop zones, Box build, SMT and any space requiring permanent low cost ESD flooring. Delete if not required.
		A.	Poured Epoxy Floor Topping System:
			1.	GroundWorx EC Epoxy Flooring: As manufactured by StaticWorx, Inc.
			2.	Floor Coating Characteristics:
				a.	Finish: Matte.
				b.	Static Dissipation: 0.02 seconds.
				c.	Solids: 37 +/- 1 percent.
				d.	Flash Point: 142 degrees F (61 degrees C).
				e.	Odor: Moderate (Glycol Ether, Alcohol).
			3.	Compliance:
				a.	Resistivity as per ASTM D257: 10^8 - 10^9 Ohms squared x Max/cm squared at 40 percent Relative Humidity.
				b.	ANSI/ESD S20.20: Meets or exceeds all the recommended guidelines for static control flooring.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Stock, Medium Gray, Pewter.
			5.	Color: Non-stock, Light Gray, Platinum.
			6.	Color: Non-stock, Soft Beige.
			7.	Color: As indicated on the drawings.
			8.	Color: As selected by Architect from manufacturer's full range of stock and non-stock options.
	** NOTE TO SPECIFIER ** This system is suitable for use on most substrates including new and existing concrete slabs as well as existing wood and vinyl floors. Consult with manufacturer literature for details of substrate compatibility. StaticWorx High-Build never requires waxing or buffing. Three separate coats are required when installing this product: Primer Base Coat, Conductive Ground Plane and ESD Top Coat. These three layers will accommodate heavy forklift and pallet jack traffic as well as static sensitive equipment. Appropriate applications for this type of floor finish include; Manufacturing & assembly areas, Research & Development, Computer storage and warehousing areas and Component Testing and Repair. Delete if not required.
		B.	High Build Epoxy Floor Topping System:
			1.	StaticWorx High-Build Epoxy Flooring: As manufactured by StaticWorx, Inc.
				a.	StaticWorx High-Build Epoxy Primer.
				b.	Conductive Ground Plane: As recommended by manufacturer.
				c.	StaticWorx High-Build Conductive Top Coat.
			2.	Floor Coating Characteristics:
				a.	Finish: Glossy.
				b.	High Build System Thickness: 20 mils.
				c.	Coefficient of Friction: 0.520.
				d.	Indentation at 2000 lbs: None.
				e.	Rate of Burning: Self-Extinguishing.
			3.	Compliance:
				a.	Tensile Strength as per ASTM D638: 2150 PSI (minimum).
				b.	Compressive Strength as per ASTM C579: 6750 PSI (minimum).
				c.	Flexural Strength as per ASTM D790: 2275 PSI.
				d.	Surface Abrasion as per ASTM D1044: 0.15 (wear index).
				e.	Hardness as per ASTM D 2240: 50 - 80.
				f.	Linear Thermal Expansion as per ASTM E831: No expansion noted.
				g.	Water Absorption as per ASTM C413: 0.025 percent.
	** NOTE TO SPECIFIER ** Delete color options not required.
			4.	Color: Medium Blue.
			5.	Color: Medium Green.
			6.	Color: Medium Gray.
			7.	Color: As indicated on the drawings.
			8.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** LoadMax E9000 topping is a three component formulation of epoxy resin polymer, polyamine curative and carefully blended, brightly colored quartz BCSC Aggregate that is then sealed with LoadMax sealer. Typical Applications: Used where static control is required, in industrial, institutional, and commercial areas; to resurface floors deteriorated by physical abuse for new floors in new construction over concrete floors. Delete if not required.
		C.	Monolithic, Seamless, Quartz Aggregate Impregnated Epoxy Concrete Topping:
			1.	StaticWorx LoadMax E -9000 Epoxy Floor Topping with Sealer: As manufactured by StaticWorx, Inc.
				a.	Sealer: LoadMax Sealer.
			2.	Topping Characteristics:
				a.	Base Coat Thickness: 16 mils.
				b.	Overall Topping Thickness: 1/16 inch (1.6 mm).
	** NOTE TO SPECIFIER ** Non-stock aggregate mixes require minimum order size. Contact a StaticWorx representative for details. Delete options for aggregate mixes not required.
			3.	Aggregate: BCSC-103.
			4.	Aggregate: BCSC-108.
			5.	Aggregate: BCSC-112.
			6.	Aggregate: BCSC-113.
			7.	Aggregate: BCSC-119.
			8.	Aggregate: BCSC-120.
			9.	Aggregate: BCSC-122.
			10.	Aggregate: BCSC-123.
			11.	Aggregate: BCSC-124.
			12.	Aggregate: BCSC-125.
			13.	Aggregate: BCSC-126.
			14.	Aggregate: BRITECAST SC standard aggregate as indicated on the Drawings.
			15.	Aggregate: BRITECAST SC custom aggregate as indicated on the Drawings.
			16.	Aggregate: BRITECAST SC aggregate as selected by Architect from manufacturer's full range of standard aggregate options.
			17.	Aggregate: BRITECAST SC aggregate as selected by Architect from manufacturer's full range of custom aggregate options.
	** NOTE TO SPECIFIER ** StaticWorx Rubber Flooring Systems are also available without static control properties. Delete if not required.
	2.3	RUBBER STATIC CONTROL FLOORING
	** NOTE TO SPECIFIER ** Suitable in areas requiring Class Zero ESD protection. Delete if not required.
		A.	Heavy-Duty Rubber Tile Floor System:
			1.	StaticWorx EC Electrically Conductive Rubber Tiling: As manufactured by StaticWorx, Inc.
				a.	Tile Thickness: 5/64 inch (2 mm).
				b.	Tile Size: 24 inches by 24 inches (610 mm by 610 mm).
			2.	Floor Tile Characteristics:
				a.	Traffic Level: Extra-heavy traffic.
				b.	Material: Rubber with abundant natural fillers and environmentally compatible color pigments.
				c.	Rubber Content: Approximately 31 percent.
				d.	Back of Tile: Flat back, double sanded.
				e.	Asbestos-Free: Products shall contain no asbestos.
				f.	Burn Resistance: Cigarette and solder burn resistance.
				g.	Halogen-Free: Products shall contain no halogens.
				h.	PVC-Free: Products shall contain no poly-vinyl-chloride.
			3.	Compliance:
				a.	Abrasion Resistance: Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater 0.50.
				b.	Hardness: ASTM D 2240, Shore A, greater than 81.
				c.	Slip Resistance: Static coefficient of friction (James Test), ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance.
				d.	Flammability: ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class 1.
				e.	Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450.
				f.	ASTM F 1344: For through-mottled tiles as applicable.
				g.	Conductivity: Less than 1.0 x 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1: Under >30 percent relative humidity at room temperature.
				h.	Static Conductive: As per ANSI/ESD S7.1
				i.	Decay Time: Less than .025 seconds when tested according to FTM 4046 101.
				j.	Static Generation: Less than 20 volts when tested according to ESD STM 97.2.
				k.	System resistance: Less than 35 x 10E6 ohms when tested according to ANSI/ESD S97.1-1.
				l.	Floor Materials and Footwear Resistance in Combination with a Person: Meets recommended range of ANSI/ESD S20.20.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete options for colors not required.
			4.	Color: 6103 Presto.
			5.	Color: 6104 Cantata.
			6.	Color: 6105 Largo.
			7.	Color: Custom, Staccato.
			8.	Color: As indicated on the drawings.
			9.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Delete item below describing accessory tile for access panels if not required.
			10.	Accessory Rubber Tiles for Access Floor Panels: StaticWorx EC Rubber, to match specified system, as manufactured by StaticWorx, Inc.
				a.	Construction: Vulcanized, two layers.
				b.	Static Conductive: As per ANSI/ESD S7.1.
				c.	Tile Thickness: 5/64 inch (2 mm).
				d.	Tile Size: Untrimmed, 24.6 inches by 24.6 inches (625 mm by 625 mm).
	** NOTE TO SPECIFIER ** Suitable in areas requiring Class Zero ESD protection. Delete if not required.
		B.	Heavy-Duty Rubber Sheet Flooring System:
			1.	StaticWorx EC Electrically Conductive Sheet Rubber Flooring: As manufactured by StaticWorx, Inc.
				a.	Sheet Size: 48 inches by 32.8 feet (1219 mm by 10 m).
				b.	Sheet Thickness: 5/64 inch (2 mm).
			2.	Sheet Flooring Characteristics:
				a.	Traffic Level: Extra-heavy traffic.
				b.	Material: Rubber with abundant natural fillers and environmentally compatible color pigments.
				c.	Rubber Content: Approximately 31 percent.
				d.	Back of Tile: Flat back, double sanded.
				e.	Asbestos-Free: Products shall contain no asbestos.
				f.	Burn Resistance: Cigarette and solder burn resistance.
				g.	Halogen-Free: Products shall contain no halogens.
				h.	PVC-Free: Products shall contain no poly-vinyl-chloride.
			3.	Compliance:
				a.	Abrasion Resistance: Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater 0.50.
				b.	Hardness: ASTM D 2240, Shore A, greater than 81.
				c.	Slip Resistance: Static coefficient of friction (James Test), ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance.
				d.	Flammability: ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class 1.
				e.	Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450.
				f.	ASTM F 1344: For through-mottled tiles as applicable.
				g.	Conductivity: Less than 1.0 X 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1: Under >30 percent relative humidity at room temperature.
				h.	Static Conductive: As per ANSI/ESD S7.1
				i.	Decay Time: Less than .025 seconds when tested according to FTM 4046 101.
				j.	Static Generation: Less than 20 volts when tested according to ESD STM 97.2.
				k.	System resistance: Less than 35 x 10E6 ohms when tested according to ANSI/ESD S97.1-1.
				l.	Floor Materials and Footwear Resistance in Combination with a Person. Meets recommended range of ANSI/ESD S20.20.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete options for colors not required.
			4.	Color: Cantata.
			5.	Color: Presto.
			6.	Color: Largo.
			7.	Color: Custom, Staccato.
			8.	Color: As indicated on the drawings.
			9.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Delete item below describing accessory tile for access panels if not required.
			10.	Accessory Rubber Tiles for Access Floor Panels: StaticWorx EC Rubber, to match specified system, as manufactured by StaticWorx, Inc.
				a.	Construction: Vulcanized, two layers.
				b.	Static Conductive: As per ANSI/ESD S7.1.
				c.	Tile Thickness: 5/64 inch (2 mm).
				d.	Tile Size: Untrimmed, 24.6 inches by 24.6 inches (625 mm by 625 mm).
	** NOTE TO SPECIFIER ** StaticWorx Architectural SD Rubber Tiling Systems involves hammered products that never need waxing or polishing; perfect for hospitals, recovery rooms, universities, schools, emergency response centers, banks and conference rooms. Do not specify application of any hard coatings to StaticWorx Architectural SD Rubber Tiling Systems. Delete if not required.
		C.	Medium-Duty, Textured Rubber Tile Floor System:
			1.	StaticWorx Architectural SD Static Dissipative Rubber Tiling: As manufactured by StaticWorx, Inc.
				a.	Surface Texture: Hammered texture.
				b.	Tile Thickness: 9/64 inch (3.5 mm).
				c.	Tile Size: 39.37 inches x 39.37 inches (1000 mm x 1000 mm).
				d.	Tile Area: 10.76 square feet (1 meter squared).
			2.	Tile Characteristics:
				a.	Traffic: Able to withstand forklift/heavy wheeled traffic, up to 850 PSI rolling load.
				b.	System Resistance: 1.0 x 10^6
				c.	Chemical and hot solder resistant.
				d.	PVC and Phthalate free.
	** NOTE TO SPECIFIER ** Architectural Rubber Tiling System has a factory finish which helps to protect the floor covering from scratches and damage during construction. Architectural Rubber Tiling System does not need waxes or coatings, which eliminates the waxing/stripping/waxing cycle necessary with other flooring.
				e.	Stain Resistant Treatment: Stainblock.
			3.	Compliance:
				a.	Static Generation: Less is than 100 volts, according to ESD STM 97.2 (tested with conductive shoes).
	** NOTE TO SPECIFIER ** The shape of contact surfaces of any equipment with wheels must be flat, shore hardness "A" of the wheels' material must be less than or equal to 90.
				b.	Abrasion Resistance, ASTM D 3389 H-18 wheel, 1.1 lb (500 gm) Load: Taber abrasion test, 1000 cycles, gram weight loss not greater than 0.50.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: 6203 Kilimanjaro.
			5.	Color: 6204 Congo.
			6.	Color: 6205 Botswana.
			7.	Color: 6206 Zanzibar.
			8.	Color: 6207 Omo Blue.
			9.	Color: 6208 Rainforest.
			10.	Color: As indicated on the drawings.
			11.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** StaticWorx Architectural SD Sheet Rubber Flooring Systems can be heat welded and are a hammered product that never needs waxing or polishing; perfect for hospitals, recovery rooms, universities, schools, emergency response centers, banks and conference rooms. Do not specify application of any hard coatings to StaticWorx Architectural SD Sheet Rubber Flooring Systems. Delete if not required.
		D.	Medium-Duty, Textured Rubber Sheet Flooring System:
			1.	StaticWorx Architectural SD Static Dissipative Sheet Flooring: As manufactured by StaticWorx, Inc.
				a.	Surface Texture: Hammered texture.
				b.	Sheet Dimensions: 48 inches x 32.8 feet (1219 mm x 10 m)
				c.	Sheet Thickness: 5/64 inch (2 mm).
			2.	Rubber Sheet Characteristics:
				a.	Traffic: Able to withstand forklift/heavy wheeled traffic, up to 850 PSI rolling load.
				b.	System Resistance: 1.0 x 10^6
				c.	Chemical and hot solder resistant.
				d.	PVC and Phthalate free.
	** NOTE TO SPECIFIER ** Architectural Rubber has a factory finish which helps to protect the floor covering from scratches and damage during construction. Architectural ESD Rubber tile does not need waxes or coatings, which eliminates the waxing/stripping/waxing cycle necessary with other flooring.
				e.	Stain Resistant Treatment: Stainblock.
			3.	Compliance:
				a.	Static Generation: Less is than 100 volts according to ESD STM 97.2 (tested with conductive shoes).
	** NOTE TO SPECIFIER ** The shape of contact surfaces of any equipment with wheels must be flat, shore hardness "A" of the wheels' material must be less than or equal to 90.
				b.	Abrasion Resistance, ASTM D 3389 H-18 wheel, 1.1 lb (500 gm) Load: Taber abrasion test, 1000 cycles, gram weight loss not greater than 0.50.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: 6203 Kilimanjaro.
			5.	Color: 6204 Congo.
			6.	Color: 6205 Botswana.
			7.	Color: 6206 Zanzibar.
			8.	Color: 6207 Omo Blue.
			9.	Color: 6208 Rainforest.
			10.	Color: As indicated on the drawings.
			11.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** StaticWorx Harmony SD Rubber Tiling System is ideal Light duty and Mission Critical Applications and is for use in engineering offices, data centers, server rooms, labs, access flooring installations and emergency call centers. Not Recommended For: Class Zero, Munitions, Explosives and Ordinance applications. Delete if not required.
		E.	Light-Duty, Rubber Tile Floor System:
			1.	StaticWorx Harmony SD Static Dissipative Rubber Tiling: As manufactured by StaticWorx, Inc.
				a.	Tile Thickness: 5/64 inch (2 mm).
				b.	Tile Size: 24 inches by 24 inches (610 mm by 610 mm).
			2.	Tile Characteristics:
				a.	Material: Single layer rubber with abundant natural fillers and environmentally compatible color pigments.
				b.	Harmony SD rubber flooring exceeds the ADA slip resistance requirements
				c.	Heel Straps: Industry standard, with 1meg-ohm resistor for evaluation..
				d.	PVC and Phthalate free.
	** NOTE TO SPECIFIER ** Harmony Rubber has a factory finish which helps to protect the floor covering from scratches and damage during construction. Architectural Rubber tile does not need waxes or coatings, which eliminates the waxing/stripping/waxing cycle necessary with other flooring.
				e.	Stain Resistant Treatment: Stainblock.
			3.	Compliance:
				a.	Resistance: Measures below the ANSI/ESD S20.20 recommended limit of 35 meg-ohms to ground using ESD STM 97.1.
				b.	Static Generation: Less is than 10 volts according to ESD STM 97.2 (tested with conductive shoes).
				c.	Conductivity: Less than 1.0 x 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1 at >30 percent relative humidity at room temperature.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Antarctica.
			5.	Color: Country Comfort.
			6.	Color: Hemlock.
			7.	Color: Hudson Bay.
			8.	Color: Mauve Mist.
			9.	Color: Morning Dew.
			10.	Color: Mystic Blue.
			11.	Color: Nantucket Fog.
			12.	Color: New Chestnut.
			13.	Color: Pleasant Valley.
			14.	Color: Red Rock.
			15.	Color: Smoke Embers.
			16.	Color: As indicated on the drawings.
			17.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** StaticWorx Harmony SD Rubber Sheet Flooring System is ideal Light duty and Mission Critical Applications and is for use in engineering offices, data centers, server rooms, labs, access flooring installations and emergency call centers. Not Recommended For: Class Zero, Munitions, Explosives and Ordinance applications. Delete if not required.
		F.	Light-Duty, Rubber Sheet Flooring System:
			1.	StaticWorx Harmony SD Static Dissipative Sheet Rubber Flooring: As manufactured by StaticWorx, Inc.
				a.	Sheet Dimensions: 48 inches x 49.2 feet (1219 mm x 15 m).
				b.	Sheet Thickness: 5/64 inch (2 mm).
			2.	Rubber Sheet Characteristics:
				a.	Material: Single layer rubber with abundant natural fillers and environmentally compatible color pigments.
				b.	Heel Straps: Industry standard, with 1meg-ohm resistor for evaluation.
				c.	PVC and Phthalate free.
	** NOTE TO SPECIFIER ** Harmony Rubber has a factory finish which helps to protect the floor covering from scratches and damage during construction. Architectural Rubber tile does not need waxes or coatings, which eliminates the waxing/stripping/waxing cycle necessary with other flooring.
				d.	Stain Resistant Treatment: Stainblock.
			3.	Compliance:
				a.	Slip Resistance: Exceeds the ADA slip resistance requirements
				b.	Resistance: Measures below the ANSI/ESD S20.20 recommended limit of 35 meg-ohms to ground using ESD STM 97.1.
				c.	Static Generation: Less is than 10 volts according to ESD STM 97.2 (tested with conductive shoes).
				d.	Conductivity: Less than 1.0 x 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1 at >30 percent relative humidity at room temperature.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Antarctica.
			5.	Color: Country Comfort.
			6.	Color: Hemlock.
			7.	Color: Hudson Bay.
			8.	Color: Mauve Mist.
			9.	Color: Morning Dew.
			10.	Color: Mystic Blue.
			11.	Color: Nantucket Fog.
			12.	Color: New Chestnut.
			13.	Color: Pleasant Valley.
			14.	Color: Red Rock.
			15.	Color: Smoke Embers.
			16.	Color: As indicated on the drawings.
			17.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Delete if not required.
		G.	Recycled Rubber Tile Floor System:
			1.	StaticWorx Recycled RC Rubber Tiling: As manufactured by StaticWorx, Inc.
				a.	Recycled Rubber: Comprised of 100 percent post-consumer tire rubber salvaged from American landfills.
				b.	Recycled Color Pigment: Achieved from color mixes containing 30 percent pre-consumer waste.
	** NOTE TO SPECIFIER ** Delete tile thickness not required.
				c.	Tile Thickness: Standard, 1/8 inch (3.5 mm).
				d.	Tile Thickness: Premium, 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Delete tile size not required.
				e.	Tile Size: 18 inches by 18 inches (914 mm by 914 mm).
				f.	Tile Size: 36 inches by 36 inches (1829 mm by 1829 mm).
			2.	Tile Characteristics:
				a.	Material: Single-ply, non-laminated recycled rubber.
				b.	Phthalate-and PVC free.
				c.	Wear Resistance: No wear layer, consistent coloration throughout.
			3.	Compliance:
				a.	Conductivity: Less than 1.0 x 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1 at >30 percent relative humidity at room temperature.
				b.	Tensile Strength: ASTM D412, 200 lb/inches squared minimum.
				c.	Flexibility: ASTM F137, Pass 1/4 inch mandrel.
				d.	Static Dissipation: ASTM F150/ESD S7.1, 106 to 109 Ohms.
				e.	Coefficient of Friction: ASTM D2047 >0.9.
				f.	McBurney Indentation: ASTM F142, 1 min 0.1120 inches.
				g.	Thermal Conductivity: ASTM C518 0.406 Btu-in/hr-ft square - degree F.
				h.	Static Load Limit: ASTM F970, 400 lbs less than 0.005 in.
				i.	Electrostatic Propensity: AATCC Test method 134 -0.8 kv.
				j.	Static Decay: FTM 4046 of FS 101B 0.01 seconds.
				k.	Chemical Resistance: ASTM F925 no change.
				l.	Impact Insulation Class: ASTM E492 49.
				m.	Sound Transmission Coefficient: ASTM E413, 51.
				n.	Noise Reduction Coefficient: ASTM C423, 0.10 sabine/ft squared.
				o.	Sustainability: ASTM E2129-01, data collected.
				p.	VOC Washington State IAQ Test: 24 hours = 0.39; 1 week = 0.056.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Bachelor Button.
			5.	Color: Birch Bark.
			6.	Color: Black Spruce.
			7.	Color: Blue Hawaii.
			8.	Color: Blue Moon.
			9.	Color: Coffee Husk.
			10.	Color: Geranium.
			11.	Color: Midnight Lavender.
			12.	Color: Red Rock.
			13.	Color: Sewn Seeds.
			14.	Color: Star Gazing.
			15.	Color: Star Cluster.
			16.	Color: Sunflower Seed.
			17.	Color: Terra Cotta Cream.
			18.	Color: Tropical Fish.
			19.	Color: Standard, as indicated on the drawings.
			20.	Color: Standard, as selected by Architect from manufacturer's full range of standard options.
			21.	Color: Custom ________________.
			22.	Color: Custom, as indicated on the Drawings.
			23.	Color: Custom, as selected by Architect from manufacturer's full range of custom options.
	** NOTE TO SPECIFIER ** Delete if not required.
		H.	Recycled Rubber Sheet Flooring System:
			1.	StaticWorx Recycled RC Sheet Rubber Flooring: As manufactured by StaticWorx, Inc.
				a.	Recycled Rubber: Comprised of 100 percent post-consumer tire rubber salvaged from American landfills.
				b.	Recycled Color Pigment: Achieved from color mixes containing 30 percent pre-consumer waste.
				c.	Sheet Dimensions: 48 inches x 50 feet (1219 mm x 15.24 m).
				d.	Sheet Area: 200 square feet (18.6 square meters) per roll.
	** NOTE TO SPECIFIER ** Delete tile thickness not required.
				e.	Sheet Thickness: Standard, 1/8 inch (3.5 mm).
				f.	Sheet Thickness: Premium, 1/4 inch (6 mm).
	** NOTE TO SPECIFIER ** Delete tile size not required.
			2.	Tile Characteristics:
				a.	Material: Single-ply, non-laminated recycled rubber.
				b.	Phthalate-and PVC free.
				c.	Wear Resistance: No wear layer, consistent coloration throughout.
			3.	Compliance:
				a.	Conductivity: Less than 1.0 x 10E6 resistance to ground when tested according to ASTM F 150/ESD.S7.1 at >30 percent relative humidity at room temperature.
				b.	Tensile Strength: ASTM D412, 200 lb/inches squared minimum.
				c.	Flexibility: ASTM F137, Pass 1/4 inch mandrel.
				d.	Static Dissipation: ASTM F150/ESD S7.1, 106 to 109 Ohms.
				e.	Coefficient of Friction: ASTM D2047 >0.9.
				f.	McBurney Indentation: ASTM F142, 1 min 0.1120 inches.
				g.	Thermal Conductivity: ASTM C518 0.406 Btu-in/hr-ft square - degree F.
				h.	Static Load Limit: ASTM F970, 400 lbs less than 0.005 in.
				i.	Electrostatic Propensity: AATCC Test method 134 -0.8 kv.
				j.	Static Decay: FTM 4046 of FS 101B 0.01 seconds.
				k.	Chemical Resistance: ASTM F925 no change.
				l.	Impact Insulation Class: ASTM E492 49.
				m.	Sound Transmission Coefficient: ASTM E413, 51.
				n.	Noise Reduction Coefficient: ASTM C423, 0.10 sabine/ft squared.
				o.	Sustainability: ASTM E2129-01, data collected.
				p.	VOC Washington State IAQ Test: 24 hours = 0.39; 1 week = 0.056.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Bachelor Button.
			5.	Color: Birch Bark.
			6.	Color: Black Spruce.
			7.	Color: Blue Hawaii.
			8.	Color: Blue Moon.
			9.	Color: Coffee Husk.
			10.	Color: Geranium.
			11.	Color: Midnight Lavender.
			12.	Color: Red Rock.
			13.	Color: Sewn Seeds.
			14.	Color: Star Gazing.
			15.	Color: Star Cluster.
			16.	Color: Sunflower Seed.
			17.	Color: Terra Cotta Cream.
			18.	Color: Tropical Fish.
			19.	Color: Custom ________________.
			20.	Color: Standard, as indicated on the drawings.
			21.	Color: Standard, as selected by Architect from manufacturer's full range of standard options.
			22.	Color: Custom, as indicated on the Drawings.
			23.	Color: Custom, as selected by Architect from manufacturer's full range of custom options.
	2.4	STATIC CONTROL VINYL FLOORING
	** NOTE TO SPECIFIER ** AmeriWorx Vinyl Tiling System undergoes a final milling process involving a computer numerical controlled (CNC) precision mills. Can be installed over concrete, raised access flooring, wood, old VCT and VAT floors. Well Suited For: Electronics manufacturing, Hospitals, Emergency Rooms, O.R.'s, Surface Mount and Wave Solder Areas, Magnetic Resonance Imaging Suites, Anyplace with a potential for chemical spillage, Biotech manufacturing plants, Cleanrooms, Data Centers, IT/Telecommunications, Access Floor Environments. Delete if not required.
		A.	USA Manufactured Vinyl Floor Tiling:
	** NOTE TO SPECIFIER ** Delete option for Conductive or Static Dissipative Tiling System not required.
			1.	AmeriWorx Electrically Conductive Vinyl Tiling: As manufactured by StaticWorx, Inc. in the United States.
			2.	AmeriWorx Static Dissipative Vinyl Tiling: As manufactured by StaticWorx, Inc. in the United States.
				a.	Tile Thickness: 0.125 inch (3.2 mm).
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				b.	Tile Size: 12 by 12 inches (305 by 305 mm).
				c.	Tile Size: Special Order, 24 by 24 inches (610 by 610 mm).
				d.	Tile Size: Special Order, 36 by 36 inches (915 by 915 mm).
				e.	Tile Size: As indicated on the Drawings.
				f.	Tile Size: As selected by Architect from manufacturer's full range of standard and special order size options.
			3.	Tile Characteristics:
				a.	Finish: Glossy.
				b.	Recycled Content: Made with at least 10 percent pre-consumer recycled content
			4.	Compliance:
				a.	Meets Class 10 cleanroom requirements.
				b.	Conforms to the requirement of NFPA 99 Standard for Health Care Facilities
				c.	Hardness: Plus/minus 55, Shore D, when tested in accordance with ASTM D 2240.
				d.	Abrasion Resistance: < 1.0 grams loss, maximum, when tested in accordance with ASTM D 3389.
				e.	Static Load Resistance: When tested in accordance with ASTM F 970:
				f.	Residual Indentation: At 125 pounds (57 kg) load, 0.25 inch (6 mm) diameter indentor foot, for 24 hours (equivalent of 2,500 psi (17 MPa) point load); residual indentation 24 hours after removing load not more than 3 percent of tile thickness.
				g.	Residual Indentation: At 700 pounds (317 kg) load, 1.125 inch (31 mm) diameter indentor foot, for 24 hours (equivalent of 700 psi (5 MPa) point load); Residual indentation 24 hours after removing load not more than 1 percent of tile thickness.
				h.	Flame Spread Index: Not more than 25 (Class 1), when tested in accordance with ASTM E84 or ASTM E 162.
				i.	Smoke Developed Index: Not more than 450 (Class 1), when tested in accordance with ASTM E 84.
				j.	Critical Radiant Flux: 1.1 W per sq cm, minimum, when tested in accordance with ASTM E 648 or NFPA 253.
				k.	Compliant with requirements of test procedures outlined in ASTM F 1700.
	** NOTE TO SPECIFIER ** Delete one of the following two sets of electrical resistance properties. The first set describes the performance required to constitute the "conductive" range of resistance; the second set is for "static-dissipative" performance.
			5.	Conductive Performance:
				a.	Electrical Resistance, Surface To Ground: 25,000 to 1,000,000 (2.5 x 10^4 to 1 x 10^6) ohms, when tested in accordance with ESD S.7.1.
				b.	Static Decay: Less than 0.3 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				c.	Static Generation: Less than 25 volts with conductive footwear at 20 percent relative humidity.
				d.	Grounding Strips: Copper foil, of type recommended by flooring manufacturer; provide minimum of 1 strip 2 inches by 24 inches (51 mm by 610 mm) per 1000 square feet (93 square m) and minimum of 3 in a single room.
			6.	Static Dissipative Performance:
				a.	Static-Dissipative Tile Performance:
				b.	Electrical Resistance, Surface To Ground: 1,000,000 to 1,000,000,000 (1 x 10^6 to 1 x 10^9) ohms, when tested in accordance with ESD S.7.1.
				c.	Static Decay: Less than 0.1 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				d.	Static Generation: Less than 50 volts with conductive footwear at 20 percent relative humidity.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
			7.	Color: 1202 Big Sky Country.
			8.	Color: 1201 Shenandoah Valley.
			9.	Color: 1203 Rio Grande.
			10.	Color: 1206 Appalachian Spring.
			11.	Color: 1204 Adirondack Ridge.
			12.	Color: 1205 Great Plains.
			13.	Color: 1207 Black. Hills.
			14.	Color: Warm Tone, premium, 1210 Mojave Desert.
			15.	Color: Warm Tone, premium, 1211 Kennebunk.
			16.	Color: As indicated on the Drawings.
			17.	Color: Standard, as selected by Architect from manufacturer's full range of standard options.
			18.	Color: Custom, as selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** AmeriWorx Sheet Vinyl Flooring System undergoes a final milling process involving a computer numerical controlled (CNC) precision mills. Well Suited For: Electronics manufacturing, Hospitals, Emergency Rooms, O.R.'s, Surface Mount and Wave Solder Areas, Magnetic Resonance Imaging Suites, Anyplace with a potential for chemical spillage, Biotech manufacturing plants, Cleanrooms, Data Centers, IT/Telecommunications, Access Floor Environments. Delete if not required.
		B.	USA Manufactured Sheet Vinyl Flooring:
	** NOTE TO SPECIFIER ** Delete option for Conductive or Static Dissipative Tiling System not required.
			1.	AmeriWorx Electrically Conductive Vinyl Sheet Flooring: As manufactured by StaticWorx, Inc. in the United States.
			2.	AmeriWorx Static Dissipative Vinyl Sheet Flooring: As manufactured by StaticWorx, Inc. in the United States.
				a.	Sheet Thickness: 0.125 inch (3.2 mm).
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
				b.	Sheet Size: Special order, custom, as selected by Architect.
				c.	Sheet Size: Special order, custom, as selected by Architect.
				d.	Sheet Size: As indicated on the Drawings.
				e.	Sheet Size: As selected by Architect from manufacturer's full range of standard and special order size options.
			3.	Vinyl Sheet Characteristics:
				a.	Finish: Glossy.
				b.	Recycled Content: Made with at least 10 percent pre-consumer recycled content
			4.	Compliance:
				a.	Meets Class 10 cleanroom requirements.
				b.	Conforms to the requirement of NFPA 99 Standard for Health Care Facilities
				c.	Hardness: Plus/minus 55, Shore D, when tested in accordance with ASTM D 2240.
				d.	Abrasion Resistance: < 1.0 grams loss, maximum, when tested in accordance with ASTM D 3389.
				e.	Static Load Resistance: When tested in accordance with ASTM F 970:
				f.	Residual Indentation: At 125 pounds (57 kg) load, 0.25 inch (6 mm) diameter indentor foot, for 24 hours (equivalent of 2,500 psi (17 MPa) point load); residual indentation 24 hours after removing load not more than 3 percent of tile thickness.
				g.	Residual Indentation: At 700 pounds (317 kg) load, 1.125 inch (31 mm) diameter indentor foot, for 24 hours (equivalent of 700 psi (5 MPa) point load); Residual indentation 24 hours after removing load not more than 1 percent of tile thickness.
				h.	Flame Spread Index: Not more than 25 (Class 1), when tested in accordance with ASTM E84 or ASTM E 162.
				i.	Smoke Developed Index: Not more than 450 (Class 1), when tested in accordance with ASTM E 84.
				j.	Critical Radiant Flux: 1.1 W per sq cm, minimum, when tested in accordance with ASTM E 648 or NFPA 253.
				k.	Compliant with requirements of test procedures outlined in ASTM F 1700.
	** NOTE TO SPECIFIER ** Delete one of the following two sets of electrical resistance properties. The first set describes the performance required to constitute the "conductive" range of resistance; the second set is for "static-dissipative" performance.
			5.	Conductive Performance:
				a.	Electrical Resistance, Surface To Ground: 25,000 to 1,000,000 (2.5 x 10^4 to 1 x 10^6) ohms, when tested in accordance with ESD S.7.1.
				b.	Static Decay: Less than 0.3 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				c.	Static Generation: Less than 25 volts with conductive footwear at 20 percent relative humidity.
				d.	Grounding Strips: Copper foil, of type recommended by flooring manufacturer; provide minimum of 1 strip 2 inches by 24 inches (51 mm by 610 mm) per 1000 square feet (93 square m) and minimum of 3 in a single room.
			6.	Static Dissipative Performance:
				a.	Static-Dissipative Tile Performance:
				b.	Electrical Resistance, Surface To Ground: 1,000,000 to 1,000,000,000 (1 x 10^6 to 1 x 10^9) ohms, when tested in accordance with ESD S.7.1.
				c.	Static Decay: Less than 0.1 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				d.	Static Generation: Less than 50 volts with conductive footwear at 20 percent relative humidity.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			7.	Color: 1202 Big Sky Country.
			8.	Color: 1201 Shenandoah Valley.
			9.	Color: 1203 Rio Grande.
			10.	Color: 1206 Appalachian Spring.
			11.	Color: 1204 Adirondack Ridge.
			12.	Color: 1205 Great Plains.
			13.	Color: 1207 Black. Hills.
			14.	Color: Warm Tone, premium, 1210 Mojave Desert.
			15.	Color: Warm Tone, premium, 1211 Kennebunk.
			16.	Color: As indicated on the Drawings.
			17.	Color: Standard, as selected by Architect from manufacturer's full range of standard options.
			18.	Color: Custom, as selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** StaticWorx Foundation Flooring is the only Phthalate-Free ESD vinyl formulation on the market. Foundation Vinyl Tiling System can be installed over concrete, raised access flooring, wood, old VCT and VAT floors. Well Suited For: data centers, computer rooms, clean rooms, electronics manufacturing and testing-repair areas. Delete if not required.
		C.	Phthalate-Free Vinyl Floor Tiling:
	** NOTE TO SPECIFIER ** Delete option for Conductive or Static Dissipative Tiling System not required.
			1.	StaticWorx Foundation Electrically Conductive Vinyl Tiling: As manufactured by StaticWorx, Inc.
			2.	StaticWorx Foundation Static Dissipative Vinyl Tiling: As manufactured by StaticWorx, Inc.
				a.	Resin: EcoGround, Phthalate-free resin. In conformance with requirements of standards including but not limited to the following:
					1)	ANSI/ESD S20.20, ANSI/ESD S 7.1 for conductive and static dissipative tile, Class 0 handling of ESDS devices, NFPA 99, Motorola R56, FAA-STD 019e.
				b.	Tile Thickness: 0.125 inch (3.2 mm).
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				c.	Tile Size: 24 by 24 inches (610 by 610 mm).
				d.	Tile Size: Custom, as indicated on the Drawings.
				e.	Tile Size: Custom, as selected by Architect from manufacturer's full range of standard and special order size options.
			3.	Tile Characteristics:
				a.	Finish: Glossy.
			4.	Compliance:
				a.	Meets Class 10 cleanroom requirements.
				b.	Conforms to the requirement of NFPA 99 Standard for Health Care Facilities
				c.	Hardness: Plus/minus 55, Shore D, when tested in accordance with ASTM D 2240.
				d.	Abrasion Resistance: < 1.0 grams loss, maximum, when tested in accordance with ASTM D 3389.
				e.	Static Load Resistance: When tested in accordance with ASTM F 970:
				f.	Residual Indentation: At 125 pounds (57 kg) load, 0.25 inch (6 mm) diameter indentor foot, for 24 hours (equivalent of 2,500 psi (17 MPa) point load); residual indentation 24 hours after removing load not more than 3 percent of tile thickness.
				g.	Residual Indentation: At 700 pounds (317 kg) load, 1.125 inch (31 mm) diameter indentor foot, for 24 hours (equivalent of 700 psi (5 MPa) point load); Residual indentation 24 hours after removing load not more than 1 percent of tile thickness.
				h.	Flame Spread Index: Not more than 25 (Class 1), when tested in accordance with ASTM E84 or ASTM E 162.
				i.	Smoke Developed Index: Not more than 450 (Class 1), when tested in accordance with ASTM E 84.
				j.	Critical Radiant Flux: 1.1 W per sq cm, minimum, when tested in accordance with ASTM E 648 or NFPA 253.
				k.	Compliant with requirements of test procedures outlined in ASTM F 1700.
	** NOTE TO SPECIFIER ** Delete one of the following two sets of electrical resistance properties. The first set describes the performance required to constitute the "conductive" range of resistance; the second set is for "static-dissipative" performance.
			5.	Conductive Performance:
				a.	Electrical Resistance, Surface To Ground: 25,000 to 1,000,000 (2.5 x 10^4 to 1 x 10^6) ohms, when tested in accordance with ESD S.7.1.
				b.	Static Decay: Less than 0.3 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				c.	Static Generation: Less than 25 volts with conductive footwear at 20 percent relative humidity.
				d.	Grounding Strips: Copper foil, of type recommended by flooring manufacturer; provide minimum of 1 strip 2 inches by 24 inches (51 mm by 610 mm) per 1000 square feet (93 square m) and minimum of 3 in a single room.
			6.	Static Dissipative Performance:
				a.	Static-Dissipative Tile Performance:
				b.	Electrical Resistance, Surface To Ground: 1,000,000 to 1,000,000,000 (1 x 10^6 to 1 x 10^9) ohms, when tested in accordance with ESD S.7.1.
				c.	Static Decay: Less than 0.1 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				d.	Static Generation: Less than 100 volts with conductive footwear at 20 percent relative humidity.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
			7.	Color: Quick-Ship, 25L5-X0 Glacier.
			8.	Color: Quick-Ship, 25L5-D7 Arctic Ice.
			9.	Color: Standard, 15L5-D9 Limestone.
			10.	Color: Standard, 59L1-X0 Bluestone.
			11.	Color: Standard, 45D2-L2 Rainier.
			12.	Color: Standard, 35L5-D7 Dune.
			13.	Color: Standard, 75L1-D7 Granite .
			14.	Color: Standard, 25D4-D7 Sea Salt.
			15.	Color: Standard, Mont Blanc
			16.	Color: Quick-Ship, as indicated on the Drawings.
			17.	Color: Quick-Ship, as selected by Architect from manufacturer's full range of custom options.
			18.	Color: Standard, as indicated on the Drawings.
			19.	Color: Standard, as selected by Architect from manufacturer's full range of custom options.
			20.	Color: Custom ________________.
			21.	Color: Custom, as indicated on the Drawings.
			22.	Color: Custom, as selected by Architect from manufacturer's full range of custom options.
	** NOTE TO SPECIFIER ** StaticWorx Foundation Flooring is the only Phthalate-Free ESD vinyl formulation on the market. Foundation Vinyl Sheet Flooring System can be installed over concrete, raised access flooring, wood, old VCT and VAT floors. Well Suited For: data centers, computer rooms, clean rooms, electronics manufacturing and testing-repair areas. Delete if not required.
		D.	Phthalate-Free Sheet Vinyl Flooring:
	** NOTE TO SPECIFIER ** Delete option for Conductive or Static Dissipative Tiling System not required.
			1.	StaticWorx Foundation Electrically Conductive Vinyl Sheet Flooring: As manufactured by StaticWorx, Inc.
			2.	StaticWorx Foundation Static Dissipative Vinyl Sheet Flooring: As manufactured by StaticWorx, Inc.
				a.	Resin: EcoGround, Phthalate-free resin. In conformance with requirements of standards including but not limited to the following:
					1)	ANSI/ESD S20.20, ANSI/ESD S 7.1 for conductive and static dissipative tile, Class 0 handling of ESDS devices, NFPA 99, Motorola R56, FAA-STD 019e.
				b.	Sheet Thickness: 0.125 inch (3.2 mm).
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
				c.	Sheet Size: Special order, custom, as selected by Architect.
				d.	Sheet Size: Special order, custom, as selected by Architect.
				e.	Sheet Size: As indicated on the Drawings.
				f.	Sheet Size: As selected by Architect from manufacturer's full range of standard and special order size options.
				g.	Finish: Glossy.
			3.	Compliance:
				a.	Meets Class 10 cleanroom requirements.
				b.	Conforms to the requirement of NFPA 99 Standard for Health Care Facilities
				c.	Hardness: Plus/minus 55, Shore D, when tested in accordance with ASTM D 2240.
				d.	Abrasion Resistance: < 1.0 grams loss, maximum, when tested in accordance with ASTM D 3389.
				e.	Static Load Resistance: When tested in accordance with ASTM F 970:
				f.	Residual Indentation: At 125 pounds (57 kg) load, 0.25 inch (6 mm) diameter indentor foot, for 24 hours (equivalent of 2,500 psi (17 MPa) point load); residual indentation 24 hours after removing load not more than 3 percent of tile thickness.
				g.	Residual Indentation: At 700 pounds (317 kg) load, 1.125 inch (31 mm) diameter indentor foot, for 24 hours (equivalent of 700 psi (5 MPa) point load); Residual indentation 24 hours after removing load not more than 1 percent of tile thickness.
				h.	Flame Spread Index: Not more than 25 (Class 1), when tested in accordance with ASTM E84 or ASTM E 162.
				i.	Smoke Developed Index: Not more than 450 (Class 1), when tested in accordance with ASTM E 84.
				j.	Critical Radiant Flux: 1.1 W per sq cm, minimum, when tested in accordance with ASTM E 648 or NFPA 253.
				k.	Compliant with requirements of test procedures outlined in ASTM F 1700.
	** NOTE TO SPECIFIER ** Delete one of the following two sets of electrical resistance properties. The first set describes the performance required to constitute the "conductive" range of resistance; the second set is for "static-dissipative" performance.
			4.	Conductive Performance:
				a.	Electrical Resistance, Surface To Ground: 25,000 to 1,000,000 (2.5 x 10^4 to 1 x 10^6) ohms, when tested in accordance with ESD S.7.1.
				b.	Static Decay: Less than 0.3 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				c.	Static Generation: Less than 25 volts with conductive footwear at 20 percent relative humidity.
				d.	Grounding Strips: Copper foil, of type recommended by flooring manufacturer; provide minimum of 1 strip 2 inches by 24 inches (51 mm by 610 mm) per 1000 square feet (93 square m) and minimum of 3 in a single room.
			5.	Static Dissipative Performance:
				a.	Static-Dissipative Tile Performance:
				b.	Electrical Resistance, Surface To Ground: 1,000,000 to 1,000,000,000 (1 x 10^6 to 1 x 10^9) ohms, when tested in accordance with ESD S.7.1.
				c.	Static Decay: Less than 0.1 seconds, from 5000 volts to 0 volts, when tested in accordance with FTM 101B, Method 4046.1.
				d.	Static Generation: Less than 100 volts with conductive footwear at 20 percent relative humidity.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			6.	Color: Quick-Ship, 25L5-X0 Glacier.
			7.	Color: Quick-Ship, 25L5-D7 Arctic Ice.
			8.	Color: Standard, 15L5-D9 Limestone.
			9.	Color: Standard, 59L1-X0 Bluestone.
			10.	Color: Standard, 45D2-L2 Rainier.
			11.	Color: Standard, 35L5-D7 Dune.
			12.	Color: Standard, 75L1-D7 Granite .
			13.	Color: Standard, 25D4-D7 Sea Salt.
			14.	Color: Standard, Mont Blanc
			15.	Color: Quick-Ship, as indicated on the Drawings.
			16.	Color: Quick-Ship, as selected by Architect from manufacturer's full range of custom options.
			17.	Color: Standard, as indicated on the Drawings.
			18.	Color: Standard, as selected by Architect from manufacturer's full range of custom options.
			19.	Color: Custom ________________.
			20.	Color: Custom, as indicated on the Drawings.
			21.	Color: Custom, as selected by Architect from manufacturer's full range of custom options.
	** NOTE TO SPECIFIER ** StaticWorx Premium Vinyl Sheet Flooring is ideal for the following applications: clean rooms, electronics manufacturing, data centers, or anywhere a seamless ESD floor is necessary. Permanently conductive, never requiring wax, this flooring can be installed with standard adhesives and is flash cove installation amenable. Delete color options if required.
		E.	Premium Vinyl Sheet Flooring:
			1.	StaticWorx Premium Vinyl Reinforced Sheet Flooring: As manufactured by StaticWorx, Inc.
				a.	Reinforcement: Polyurethane reinforced product (PUR).
				b.	Sheet Thickness: 0.080 inch (2 mm).
				c.	Sheet Size: 6.5 feet x 82.5 feet (2 m x 5 m).
				d.	Finish: Glossy.
			2.	Sheet Characteristics:
				a.	Composition: Homogeneous.
				b.	Fungi / Bacterial Resistance: Does not support growth.
			3.	Compliance:
				a.	Thickness, ASTM F1913: EN 428 0.080 inches, 2.0 mm standard size.
				b.	Sheet Size, ASTM F1913: EN 426 6.5 ft. x 82.5 ft., 2 m x 25 m.
				c.	Weight, EN 430: 6.44 lbs./sq. yd., 3.50 kg/m2.
				d.	Residual Indentation, ASTM F 970, EN 433: Static load 800 psi, < 0.1 mm.
				e.	Flexibility, ASTM F: 137 Pass.
				f.	Dimensional Stability, ASTM F 2199, EN 434: Pass, < 0.4 mm.
				g.	Electrical Resistance, ESD S7.1, EN 1081: 2.5 x 104 - 1.0 x 106, < 106 W.
				h.	Static Generation, ESD S97.2, EN 1815: < 10 V, < 2.0 kV.
				i.	Resistance to Chemicals, ASTM F 925, EN 423: Pass, Good Resistance.
				j.	Thermal Resistance, ISO 8302 (EN 12664): < 0.00512 m2K/W.
				k.	Light Fastness, ASTM F 1515, EN 20105: B02 Pass, Blue Wool Standard 6.
				l.	Chair Castor, EN 425: Continuous Use.
				m.	Smoke Density, ASTM E 662: < 450.
				n.	Flammability:
					1)	EN 13501-1: Class Bfl-S1.
					2)	EN ISO 9239-1: >= 8 kw/m2.
					3)	EN ISO 11925-2: Pass.
					4)	ASTM E648-06: Type 1.
				o.	Abrasion Resistance:
					1)	EN 660-2: Wear Group P.
					2)	ASTM D3384: Pass.
				p.	Slip Resistance
					1)	EN 13893: Class DS.
					2)	DIN 51130: R10.
					3)	ASTM D 2047: > 0.7.
					4)	Clean Rooms ASTM F51 Class A - Non Shedding
				q.	Maritime Usage:
					1)	US Coast Guard Approved.
					2)	Marine Equipment Directive.
					3)	IMO RES A 653 (16).
					4)	IMO MSC 61 (67).
					5)	Annex 1 Part 2 (Smoke & Toxicity).
					6)	Part 5 (Spread of Flame) and Annex 2.
					7)	(Surface Flammability / Heat Release) .1121.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color: Caribe .
			5.	Color: Bali.
			6.	Color: Licorice.
			7.	Color: Linen.
			8.	Color: Serenade.
			9.	Color: Shale.
			10.	Color: As indicated on the Drawings.
			11.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Delete if not required.
	2.5	STATIC CONTROL CARPETING
	** NOTE TO SPECIFIER ** Antistatic sprays are never needed to preserve ESD performance. Applied using a Conductive Releasable Adhesive, StaticWorx The Conductors Carpet Tiling requires just 1 hour downtime from start to finish of reinstallation. Ideal for installation in critical environment government areas, including data storage, mission critical command centers (like flight towers, 9-1-1 dispatcher areas, and hospitals). Appropriate for areas including light manufacturing, system tests, product repair, box build, as well as for Class-0, research and development (R & D) labs handling ultra-sensitive, state-of-the-art electronic parts. Delete if not required.
		A.	Carpet Tiling:
	** NOTE TO SPECIFIER ** Delete option for conventional StaticWorx The Conductors Floor Tiling System and StaticWorx The Conductors Peel and Stick Carpet Tiling System not required.
			1.	StaticWorx The Conductors Carpet Tiling System: As manufactured by StaticWorx, Inc.
			2.	StaticWorx The Conductors Peel and Stick Carpet Tiling System: As manufactured by StaticWorx, Inc.
				a.	Peel and Stick: Tiles shall be factory coated with peel and stick adhesive.
			3.	Tile Characteristics:
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				a.	Tile Size: 24 by 24 inches (610 by 610 mm).
				b.	Tile Size: Custom, as indicated on the Drawings.
				c.	Tile Size: Custom, as selected by Architect from manufacturer's full range of standard and special order size options.
				d.	Special Treatment: Conductive precoat.
				e.	Primary Backing: Synthetic, non-woven.
				f.	Secondary Backing: Dissipative StaticWorx backing, made with recycled content.
				g.	Material: Thermoplastic polyolefin compound with a fiberglass reinforcing layer.
					1)	Carpet shall be first quality of American manufacture and all yarn shall be of domestic origin.
				h.	Conductive fiber: Continuous conductive StaticWorx TM 44 denier helix fiber monofilament in every tuft.
				i.	PVC Free.
				j.	100 percent recyclable.
				k.	Composition: Homogeneous.
				l.	Fungi / Bacterial Resistance: Does not support growth.
			4.	Compliance:
				a.	Flammability:
					1)	Flooring Radiant Panel: Class I (ASTM E 648).
					2)	NBS Smoke Density : 450 or less (ASTM E 662 Flaming Mode).
				b.	Electrostatic Propensity: Not to exceed 2.0 kV per AATCC 134.
				c.	Electrical Resistance: ESD S7.1, NFPA 99 Rtt, RTG:
					1)	ESD S7.1 Resistive Characterization of Materials: Six or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in Ohms, 1.0 x 105 minimum, 1.0 x 10^8 maximum.
					2)	ESD S7.1 Resistance Characterization of Materials: Six or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in Ohms, 2.5 x 10^4 minimum, 5.0 x 10^7 maximum.
					3)	Electrical Resistance/Voltage Test ANSI/ESD S-20.20, compliant when using approved conductive footwear system. Results within recommended range < 35 x 10^6 Ohm or < 100 volts.
					4)	D.O.D. HDBK263A, Section 40.1.2: Meets recommended guidelines for sensitive ESD devices, Class 1.
					5)	Roller Caster Electrical Test (CET) Assessment. After 100,000 chair caster cycles there was no depreciable change in conductivity or electrical performance. Lab data available on request.
					6)	Grounding: 5 mm 26 gauge copper strip.
				d.	Addresses Motorola R56.
				e.	Lightfastness: Rating of not less than 3 on International Grey Scale, After 40 AFU's (Xenon Arc) per AATCC Test Method 16E.
				f.	Crockfastness: AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 4 wet and dry.
				g.	Atmospheric Fading, AATCC Test Method 129, Ozone/AATCC Test Method 23: Burned Gas shall not be less than 3 on International Grey. Scale after two cycles on each test.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			5.	Color/Pattern: Solder Grey.
			6.	Color/Pattern: BGA Blue.
			7.	Color/Pattern: Mosaic Alloy.
			8.	Color/Pattern: Standard Colors.
			9.	Color/Pattern: Graphite.
			10.	Color/Pattern: Metallic Beige.
			11.	Color/Pattern: Silicon Valley Sand.
			12.	Color/Pattern: Pure Titanium.
			13.	Color/Pattern: Burnished Copper.
			14.	Color: As indicated on the Drawings.
			15.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Antistatic sprays are never needed to preserve ESD performance. Applied using a Conductive Releasable Adhesive, GroundWorx Carpet Tiling requires just 1 hour downtime from start to finish of reinstallation. Ideal for installation in critical environment government areas, including data storage, mission critical command centers (like flight towers, 9-1-1 dispatcher areas, and hospitals). Appropriate for areas including light manufacturing, system tests, product repair, box build, as well as for Class-0, research and development (R & D) labs handling ultra-sensitive, state-of-the-art electronic parts. Delete if not required.
		B.	Carpet Tiling:
	** NOTE TO SPECIFIER ** Delete option for conventional DataWorx Floor Tiling System and DataWorx Peel and Stick Carpet Tiling System not required.
			1.	DataWorx Carpet Tiling System: As manufactured by StaticWorx, Inc.
			2.	DataWorx Peel and Stick Carpet Tiling System: As manufactured by StaticWorx, Inc.
				a.	Peel and Stick: Tiles shall be factory coated with peel and stick adhesive.
			3.	Tile Characteristics:
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				a.	Tile Size: 24 by 24 inches (610 by 610 mm).
				b.	Tile Size: Custom, as indicated on the Drawings.
				c.	Tile Size: Custom, as selected by Architect from manufacturer's full range of standard and special order size options.
				d.	Special Treatment: Conductive precoat.
				e.	Primary Backing: Synthetic, non-woven.
				f.	Secondary Backing: Dissipative StaticWorx backing, made with recycled content.
				g.	Material: Thermoplastic polyolefin compound with a fiberglass reinforcing layer.
					1)	Carpet shall be first quality of American manufacture and all yarn shall be of domestic origin.
				h.	Conductive fiber: Continuous conductive StaticWorx TM 44 denier helix fiber monofilament in every tuft.
				i.	PVC Free.
				j.	100 percent recyclable.
				k.	Composition: Homogeneous.
				l.	Fungi / Bacterial Resistance: Does not support growth.
			4.	Compliance:
				a.	Flammability:
					1)	Flooring Radiant Panel: Class I (ASTM E 648).
					2)	NBS Smoke Density : 450 or less (ASTM E 662 Flaming Mode).
				b.	Electrostatic Propensity: Not to exceed 2.0 kV per AATCC 134.
				c.	Electrical Resistance: ESD S7.1, NFPA 99 Rtt, RTG:
					1)	ESD S7.1 Resistive Characterization of Materials: Six or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in Ohms, 1.0 x 105 minimum, 1.0 x 10^8 maximum.
					2)	ESD S7.1 Resistance Characterization of Materials: Six or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in Ohms, 2.5 x 10^4 minimum, 5.0 x 10^7 maximum.
					3)	Electrical Resistance/Voltage Test ANSI/ESD S-20.20, compliant when using approved conductive footwear system. Results within recommended range < 35 x 10^6 Ohm or < 100 volts.
					4)	D.O.D. HDBK263A, Section 40.1.2: Meets recommended guidelines for sensitive ESD devices, Class 1.
					5)	Roller Caster Electrical Test (CET) Assessment. After 100,000 chair caster cycles there was no depreciable change in conductivity or electrical performance. Lab data available on request.
					6)	Grounding: 5 mm 26 gauge copper strip.
				d.	Addresses Motorola R56.
				e.	Lightfastness: Rating of not less than 3 on International Grey Scale, After 40 AFU's (Xenon Arc) per AATCC Test Method 16E.
				f.	Crockfastness: AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 4 wet and dry.
				g.	Atmospheric Fading, AATCC Test Method 129, Ozone/AATCC Test Method 23: Burned Gas shall not be less than 3 on International Grey. Scale after two cycles on each test.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			5.	Color/Pattern: 27129 Golden Graphite.
			6.	Color/Pattern: 27130 Bluetooth.
			7.	Color/Pattern: 27131 Plasma.
			8.	Color/Pattern: 27132 Pixel.
			9.	Color/Pattern: 27133 Flash.
			10.	Color/Pattern: 27134 Wired.
			11.	Color: As indicated on the Drawings.
			12.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Antistatic sprays are never needed to preserve ESD performance. Ideal for installation in critical environment government areas, including data storage, mission critical command centers (like flight towers, 9-1-1 dispatcher areas, and hospitals). Appropriate for areas including light manufacturing, system tests, product repair, box build, as well as for Class-0, research and development (R & D) labs handling ultra-sensitive, state-of-the-art electronic parts. Delete if not required.
		C.	Sheet Carpeting:
			1.	StaticWorx The Conductors Sheet Carpeting System: As manufactured by StaticWorx, Inc.
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				a.	Sheet Size: Standard.
				b.	Sheet Size: Custom, as indicated on the Drawings.
				c.	Sheet Size: Custom, as selected by Architect from manufacturer's full range of standard and special order size options.
			2.	Sheet Carpeting Characteristics:
				a.	Special Treatment: Conductive precoat.
				b.	Primary Backing: Synthetic, non-woven.
				c.	Secondary Backing: Dissipative StaticWorx backing, made with recycled content.
				d.	Material: Thermoplastic polyolefin compound with a fiberglass reinforcing layer.
					1)	Carpet shall be first quality of American manufacture and all yarn shall be of domestic origin.
				e.	Conductive fiber: Continuous conductive StaticWorx TM 44 denier helix fiber monofilament in every tuft.
				f.	PVC Free.
				g.	100 percent recyclable.
				h.	Composition: Homogeneous.
				i.	Fungi / Bacterial Resistance: Does not support growth.
			3.	Compliance:
				a.	Flammability:
					1)	Flooring Radiant Panel: Class I (ASTM E 648).
					2)	NBS Smoke Density : 450 or less (ASTM E 662 Flaming Mode).
				b.	Electrostatic Propensity: Not to exceed 2.0 kV per AATCC 134.
				c.	Electrical Resistance:
					1)	ESD S7.1 Resistive Characterization of Materials: Six or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in Ohms, 1.0 x 105 minimum, 1.0 x 10^8 maximum.
					2)	ESD S7.1 Resistance Characterization of Materials: Six or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in Ohms, 2.5 x 10^4 minimum, 5.0 x 10^7 maximum.
					3)	Electrical Resistance/Voltage Test ANSI/ESD S-20.20, compliant when using approved conductive footwear system. Results within recommended range < 35 x 10^6 Ohm or < 100 volts.
					4)	D.O.D. HDBK263A, Section 40.1.2: Meets recommended guidelines for sensitive ESD devices, Class 1.
					5)	Roller Caster Electrical Test (CET) Assessment. After 100,000 chair caster cycles there was no depreciable change in conductivity or electrical performance. Lab data available on request.
					6)	Grounding: 5 mm 26 gauge copper strip.
				d.	Addresses Motorola R56.
				e.	Lightfastness: Rating of not less than 3 on International Grey Scale, After 40 AFU's (Xenon Arc) per AATCC Test Method 16E.
				f.	Crockfastness: AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 4 wet and dry.
				g.	Atmospheric Fading, AATCC Test Method 129, Ozone/AATCC Test Method 23: Burned Gas shall not be less than 3 on International Grey. Scale after two cycles on each test.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color/Pattern: Solder Grey.
			5.	Color/Pattern: BGA Blue.
			6.	Color/Pattern: Mosaic Alloy.
			7.	Color/Pattern: Standard Colors.
			8.	Color/Pattern: Graphite.
			9.	Color/Pattern: Metallic Beige.
			10.	Color/Pattern: Silicon Valley Sand.
			11.	Color/Pattern: Pure Titanium.
			12.	Color/Pattern: Burnished Copper.
			13.	Color: As indicated on the Drawings.
			14.	Color: As selected by Architect from manufacturer's full range of standard options.
	** NOTE TO SPECIFIER ** Antistatic sprays are never needed to preserve ESD performance. Ideal for installation in critical environment government areas, including data storage, mission critical command centers (like flight towers, 9-1-1 dispatcher areas, and hospitals). Appropriate for areas including light manufacturing, system tests, product repair, box build, as well as for Class-0, research and development (R & D) labs handling ultra-sensitive, state-of-the-art electronic parts. Delete if not required.
		D.	Sheet Carpeting:
			1.	DataWorx Sheet Carpeting System: As manufactured by StaticWorx, Inc.
	** NOTE TO SPECIFIER ** Non-stock size options require minimum order size. Contact a StaticWorx representative for details. Delete size options not required.
				a.	Sheet Size: Standard.
				b.	Sheet Size: Custom, as indicated on the Drawings.
				c.	Sheet Size: Custom, as selected by Architect from manufacturer's full range of standard and special order size options.
			2.	Sheet Carpeting Characteristics:
				a.	Special Treatment: Conductive precoat.
				b.	Primary Backing: Synthetic, non-woven.
				c.	Secondary Backing: Dissipative StaticWorx backing, made with recycled content.
				d.	Material: Thermoplastic polyolefin compound with a fiberglass reinforcing layer.
					1)	Carpet shall be first quality of American manufacture and all yarn shall be of domestic origin.
				e.	Conductive fiber: Continuous conductive StaticWorx TM 44 denier helix fiber monofilament in every tuft.
				f.	PVC Free.
				g.	100 percent recyclable.
				h.	Composition: Homogeneous.
				i.	Fungi / Bacterial Resistance: Does not support growth.
			3.	Compliance:
				a.	Flammability:
					1)	Flooring Radiant Panel: Class I (ASTM E 648).
					2)	NBS Smoke Density : 450 or less (ASTM E 662 Flaming Mode).
				b.	Electrostatic Propensity: Not to exceed 2.0 kV per AATCC 134.
				c.	Electrical Resistance:
					1)	ESD S7.1 Resistive Characterization of Materials: Six or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in Ohms, 1.0 x 105 minimum, 1.0 x 10^8 maximum.
					2)	ESD S7.1 Resistance Characterization of Materials: Six or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in Ohms, 2.5 x 10^4 minimum, 5.0 x 10^7 maximum.
					3)	Electrical Resistance/Voltage Test ANSI/ESD S-20.20, compliant when using approved conductive footwear system. Results within recommended range < 35 x 10^6 Ohm or < 100 volts.
					4)	D.O.D. HDBK263A, Section 40.1.2: Meets recommended guidelines for sensitive ESD devices, Class 1.
					5)	Roller Caster Electrical Test (CET) Assessment. After 100,000 chair caster cycles there was no depreciable change in conductivity or electrical performance. Lab data available on request.
					6)	Grounding: 5 mm 26 gauge copper strip.
				d.	Addresses Motorola R56.
				e.	Lightfastness: Rating of not less than 3 on International Grey Scale, After 40 AFU's (Xenon Arc) per AATCC Test Method 16E.
				f.	Crockfastness: AATCC Test Method 165 Minimum stain rating on International Grey Scale of not less than 4 wet and dry.
				g.	Atmospheric Fading, AATCC Test Method 129, Ozone/AATCC Test Method 23: Burned Gas shall not be less than 3 on International Grey. Scale after two cycles on each test.
	** NOTE TO SPECIFIER ** Non-stock colors require minimum order size. Contact a StaticWorx representative for details. Delete color options not required.
			4.	Color/Pattern: 27129 Golden Graphite.
			5.	Color/Pattern: 27130 Bluetooth.
			6.	Color/Pattern: 27131 Plasma.
			7.	Color/Pattern: 27132 Pixel.
			8.	Color/Pattern: 27133 Flash.
			9.	Color/Pattern: 27134 Wired.
			10.	Color: As indicated on the Drawings.
			11.	Color: As selected by Architect from manufacturer's full range of standard options.
	2.6	STATIC CONTROL MATS AND RUNNERS
	** NOTE TO SPECIFIER ** StaticWorx GridLock Tile does not require permanent installation. This versatile vinyl tile can be installed over old flooring, bare concrete or raised access floors. Any spaces where carpet tile impedes ease of rolling including: Over any raised access flooring, NASA command centers, Data Centers, 9-1-1 Call centers, Flight Towers and flight support area, Mission Critical Spaces, NOCs, FAA ATCT, TRACON, AFSS, DASR, ARTCC, Government CCC facilities, Military EOC's, MP and fire dispatch rooms. Delete if not required.
		A.	Vinyl Chair Mats:
			1.	StaticWorx GridLock Conductive Tile: As manufactured by StaticWorx, Inc
			2.	Description: Adhesive free, permanently conductive, modular, hard-surface tile for use on its own or as a companion product to carpet tile.
			3.	Construction: Homogenous vinyl tile with encased conductive elements distributed throughout.
			4.	Tile Size: 24 inches by 24 inches (610 mm by 610 mm).
			5.	Tile Thickness: 13/64 inch (5 mm).
			6.	Static Control Properties
				a.	Meets ANSI/ESD S20.20.
				b.	Electrostatic propensity of less than 2 kV.
				c.	Meets the D.O.D. HDBK263A, Section 40.1.2: guidelines for sensitive ESD devices, Class 1.
				d.	Meets FAA-STD-019E Section 3.16.5.2.1.5 - requirements for static dissipative ESD control floor coverings.
				e.	Static Generation Comparison )less than 20 volts per ESD STM 97.2): <20 volts.
				f.	Squareness (A STM F 540): Less than 0.010 inch.
				g.	Static Load Limit (Mod. ASTM F 970-00): 2,500 psi.
				h.	Electrical Resistance: 2.5 x 104 1.0 x 106 Per ANSI/ESD S7.1.
				i.	Static Decay: 0.01 seconds.
	** NOTE TO SPECIFIER ** Meets Class 0. For use in: Labs, Data Centers, Server rooms, Electronics Manufacturing, Emergency 9-1-1, Communication Applications, Clean Rooms. Lay-flat, 2 millimeter thickness allows for easy rolling of chairs and carts without curling. Delete if not required.
		B.	Rubber Floor Mats and Runners:
			1.	Aisle-Safe with Ground Cord: As manufactured by StaticWorx, Inc.
			2.	Construction: Two-layer, vulcanized conductive rubber with high quality natural and industrial rubber components.
			3.	Thickness: 2 mm.
	** NOTE TO SPECIFIER ** Delete sizes not required.
			4.	Runner Size: 4 feet by 40 feet (1219 mm by 12192 mm).
			5.	Mat Size: 4 feet by 5.5 feet (1219 mm by 1676 mm).
			6.	Mat Size: 4 feet x 7.75 feet (1219 mm by 2362 mm).
			7.	Compliance:
				a.	Coloring: ASTM F 1344, for solid color, homogeneous tiles and through-mottled tiles as applicable
				b.	Protects below 10 volts walking body voltage generation BVG.
				c.	Hardness: ASTM D 2240, Shore A, not less than 85.
				d.	Slip Resistance: Static co-efficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance.
				e.	Asbestos-Free: Products shall contain no asbestos.
				f.	Flammability: ASTM E 648; NFPA 253; NBSIR 75 950 result to be not less than 0.45 watts per square centimeter, Class-1.
				g.	Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450.
				h.	Burn Resistance: Solder burn resistant.
				i.	Halogen-Free: Products shall not contain halogen.
				j.	PVC-Free: Products shall not contain poly-vinyl-chloride.
				k.	Conductivity: Less than 1.0 x 10 to the sixth resistance to ground when tested according to ASTM F 150 and ESD.S7.1 under >30% relative humidity at room temperature.
				l.	Lifetime Conductivity: As per guidelines of ANSI/ESD S20.20.
				m.	Decay Time: .025 seconds for StaticWorx when tested according to FTM 4046 101.
				n.	Static Generation: <20 volts when tested according to ESD STM 97.2.
				o.	Abrasion Resistance Taber abrasion test, ASTM D 3389, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.70.
				p.	System Resistance: <1.0 x 10 to the sixth per ANSI/ESD STM 97.1 with conductive footwear (meets or exceeds recommended guidelines of ANSI/ESD S20.20).
	2.7	ADHESIVES AND AUXILIARY PRODUCTS
		A.	Adhesives: Provide adhesive recommended by manufacturer for applications and systems specified.
	** NOTE TO SPECIFIER ** Delete options not required.
			1.	Statbond One-Part Acrylic Adhesive, Conductive Waterborne Acrylic Dispersion Adhesive: As manufactured by StaticWorx, Inc.
			2.	Groundtack Conductive Release Adhesive, Conductive Water Based Acrylic Adhesive: As manufactured by StaticWorx, Inc.
			3.	Dry Adhesive For Antistatic Flooring: As manufactured by StaticWorx, Inc.
			4.	As indicated on the Drawings.
			5.	As selected by Architect from manufacturer's full range of adhesive options.
		B.	Floor Finish Coating: Provide adhesive recommended by manufacturer for applications and systems specified.
	** NOTE TO SPECIFIER ** Delete options not required.
			1.	COAT StaticWorx Coat Dissipative Floor Finish: As manufactured by StaticWorx, Inc
			2.	SEAL Static Dissipative Sealer: As manufactured by StaticWorx, Inc
			3.	None.
			4.	As indicated on the Drawings.
			5.	As selected by Architect from manufacturer's full range of adhesive options.
		C.	Auxiliary Products:
	** NOTE TO SPECIFIER ** Delete options not required.
			1.	StaticWorx 5505 TriboGround: As manufactured by StaticWorx, Inc
			2.	StaticWorx TriboClean: As manufactured by StaticWorx, Inc
			3.	StaticWorx 5504 Anti Static Flooring Stripper and Degreaser: As manufactured by StaticWorx, Inc
	PART 3	EXECUTION
	3.1	EXAMINATION
		A.	Do not begin installation until substrates are within manufacturer's specified tolerances and have been prepared in accordance with manufacturer's instructions.
		B.	If substrate preparation is the responsibility of another installer, do not proceed with installation. Notify Architect of unsatisfactory preparation immediately. Commencement of full installation represents acceptance of existing substrate conditions.
	3.2	PREPARATION
		A.	Prepare acceptable substrates using the methods recommended by the manufacturer for achieving the best result for the substrate. Clean surfaces thoroughly prior to installation.
	** NOTE TO SPECIFIER ** Delete if concrete substrates not required.
		B.	Concrete Substrates: The Contractor shall verify to the Owner and installer a minimum of 30 days prior to the scheduled flooring installation the following substrate conditions. All substrate testing shall be documented and submitted to the Architect and Owner before commencement of the flooring installation.
			1.	Verify that substrates are dry and free of curing compounds, sealers, and hardeners.
			2.	Remove substrate coatings and other substances that are incompatible with adhesives and that contain soap, wax, oil, or silicone, using mechanical methods recommended by manufacturer.
			3.	Alkalinity and Adhesion Testing: Perform tests recommended by manufacturer. Proceed with installation only after substrates pass testing.
			4.	Moisture Testing: Perform tests recommended by manufacturer. Proceed with installation only after substrates pass testing.
	3.3	INSTALLATION
		A.	Install in accordance with manufacturer's instructions and warranty conditions and to meet specified performance requirements. Install flooring with uniform appearance and in proper relationship with adjacent work.
		B.	Test electrical properties of flooring in accordance with manufacturer's recommendations. Correct any defects prior to Substantial Completion.
	3.4	PROTECTION
		A.	Protect installed products, including but not limited to finished flooring system, from damage until Substantial Completion.
		B.	Touch-up, repair or replace damaged products before Substantial Completion.
	3.5	CLEANING
		A.	Refer to manufacturers instructions for proper cleaning and maintenance of the products.
	END OF SECTION