Glidden Professional Paints and Coatings Specification

MasterFormat: 04

SpecWizard: customize this spec Download this Paints and Coatings Specification for WORD | WP | RTF | TEXT

Find over 500 more construction specifications | Arcat.com

SECTION 09 91 00

PAINTS AND COATINGS

** NOTE TO SPECIFIER ** Glidden Professional™; paints and coatings.
.
This section is based on the products of Glidden Professional™ and Devoe Coatings products manufactured by Akzo Nobel Paints, which is located at:
15885 W. Sprague Rd.
Strongsville, OH 44136
Toll Free: 800-434-3336
Phone: 440-297-8000
Fax: 440-297-8999
Web: http://www.gliddenprofessional.com
Email: brian.joyce@gliddenprofessional.com
AkzoNobel's portfolio of Glidden Professional™ and Devoe Coatings branded paints are sold through Glidden Professional Paint Centers and authorized independent dealers across the United States. In addition to paints and related products, Glidden Professional Paint Centers offer contractors expert advice and services to simplify the product selection, delivery and job site clean up of any residential, commercial or industrial project. To learn more, visit www.gliddenprofessional.com .
AkzoNobel is proud to be one of the world's leading industrial companies. Based in Amsterdam, the Netherlands, we make and supply a wide range of paints, coatings and specialty chemicals - 2008 revenue totaled E15.4 billion. In fact, we are the largest global paints and coatings company. As a major producer of specialty chemicals we supply industries worldwide with quality ingredients for life's essentials. We think about the future, but act in the present. We're passionate about introducing new ideas and developing sustainable answers for our customers. That's why our 60,000 employees - who are based in more than 80 countries - are committed to excellence and delivering Tomorrow's Answers Today™.

PART 1

GENERAL

1.1

SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete any items below not relevant to this project; add others as required.

Interior paints and coatings.

Exterior paints and coatings.

1.2

RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

Section 03 30 00 - Cast-in-Place Concrete.

Section 05 12 16 - Fabricated Fireproofed Steel Columns.

Section 05 50 00 - Metal Fabrications.

Section 06 20 00 - Finish Carpentry.

Section 06 40 00 - Architectural Woodwork.

Section 08 11 13.16 - Custom Hollow Metal Doors and Frames.

Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

1.3

SUBMITTALS

Submit under provisions of Section 01 30 00 - Administrative Requirements.

Product Data: For each paint system indicated, including:

Product characteristics.

Surface preparation instructions and recommendations.

Primer requirements and finish specification.

Storage and handling requirements and recommendations.

Application methods.

Cautions for storage, handling and installation.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

Selection Samples: Submit a complete set of color chips that represent the full range of manufacturer's color samples available.

Verification Samples: For each finish product specified, submit samples that represent actual product, color, and sheen.

Schedule: Provide a paint schedule indicating each type of surface to be painted, and primer and finish coats proposed for use; include dry film thickness for each coating.

1.4

QUALITY ASSURANCE

Installer Qualifications: A firm or individual experienced in applying paints and coatings similar in material, design, and extent to those indicated for this Project, whose work has resulted in applications with a record of successful in-service performance.

Paint exposed surfaces. If a color of finish or a surface is not specifically mentioned, Architect will select from standard colors and finishes available.

Do not paint prefinished items, concealed surfaces, finished metal surfaces, operating parts, and labels unless indicated.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

Finish surfaces for verification of products, colors and sheens.

Finish area designated by Architect.

Provide samples that designate primer and finish coats.

Do not proceed with remaining work until the Architect approves the mock-up.

1.5

DELIVERY, STORAGE, AND HANDLING

Delivery: Deliver manufacturer's unopened containers to the work site. Packaging shall bear the manufacturer's name, label, and the following list of information:

Product name and type (description).

Application and use instructions.

Surface preparation.

VOC content.

Environmental issues.

Batch date.

Color number.

Storage: Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

Store materials in an area that is within the acceptable temperature range, per manufacturer's instructions. Protect from freezing.

Handling: Maintain a clean, dry storage area, to prevent contamination or damage to the coatings.

1.6

PROJECT CONDITIONS

Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

** NOTE TO SPECIFIER ** Extra materials may not be allowed for publicly funded projects. Delete if not required and revised quantity based on your project requirements.

1.7

EXTRA MATERIALS

Furnish extra paint materials from the same production run as the materials applied and in the quantities described below. Package with protective covering for storage and identify with labels describing contents. Deliver extra materials to Owner.

Furnish Owner with an additional one percent of each material and color, but not less than 1 gal (3.8 l) or 1 case, as appropriate.

PART 2

PRODUCTS

2.1

MANUFACTURERS

Acceptable Manufacturer: Glidden Professional, which is located at: 15885 W. Sprague Rd. ; Strongsville, OH 44136; Toll Free Tel: 800-984-5444; Tel: 440-297-8000 ; Fax: 800-491-3240; Email: request info; Web: www.gliddenprofessional.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

Substitutions: Not permitted.

Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2

PAINT MATERIALS - GENERAL

Paints and Coatings:

Unless otherwise indicated, provide factory-mixed coatings. When required, mix coatings to correct consistency in accordance with manufacturer's instructions before application. Do not reduce, thin, or dilute coatings or add materials to coatings unless such procedure is specifically described in manufacturer's product instructions.

For opaque finishes, tint each coat including primer coat and intermediate coats or follow manufacturer's product instructions for optimal color conformance.

Application Accessories: Provide all primers, sealers, cleaning agents, cleaning cloths, sanding materials, and clean-up materials required, per manufacturer's recommendations.

Finish Schedule: Refer to the Drawings for surfaces to receive coatings. Unless indicated otherwise, provide primer and two finish coats for each surface.

** NOTE TO SPECIFIER ** Delete if not required.

2.3

INTERIOR FINISH SCHEDULE

** NOTE TO SPECIFIER ** Delete if not required.

Gypsum Drywall, Plaster, Smooth Concrete and Unglazed Brick:

** NOTE TO SPECIFIER ** Systems 1-5 and 9 Comply with OTC, LEED and CHPS requirements. Systems 6-8 and 11-14 Comply with OTC and LEED requirements. System 10 complies with OTC requirements. For PLASTER Systems Substitute Gripper 3210 Primer for Hi-Hide 1000 Primer, PVA Wall Primer 1030, PVA Standard Primer and Lifemaster No VOC 9116 Primer. (Complies with OTC, LEED and CHPS requirements). For Smooth Concrete and Unglazed Brick Systems Substitute Bond Prep 3030 Primer for Hi-Hide 1000 Primer, PVA Wall Primer 1030, PVA Standard Primer 1090 and Lifemaster No VOC 9116 Primer (Complies with OTC and LEED requirements) -OR- Substitute Gripper 3210 Primer for Hi-Hide 1000 Primer, PVA Wall Primer 1030 and PVA Standard Primer. (Complies with OTC, LEED and CHPS requirements). Delete systems not required.

Premium Durability, No VOC Acrylic Latex:

Flat: 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7100 topcoat.

Eggshell: 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7200 topcoat.

LoLustre (Satin): 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7300 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7400 topcoat.

Sustainability, No VOC Acrylic Latex:

Flat: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9100 topcoat.

Eggshell: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9300 topcoat.

Semi-Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9200 topcoat.

Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9400 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat High Hide 1000 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4216 topcoat.

Sustainability, No VOC Latex:

Flat: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1209 topcoat.

Eggshell: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1411 topcoat.

Semi-Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1415 topcoat.

Productivity, Latex:

** NOTE TO SPECIFIER ** Add Gripper Primer 3210 or Bond Prep Primer 3030 for Plaster (meets OTC and LEED requirements).

Flat: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 1210 topcoat.

Low Sheen Eggshell: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 1410 topcoat.

Eggshell: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 1412 topcoat.

LoLustre (Satin): 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 1433 topcoat.

Semi-Gloss: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 1416 topcoat.

** NOTE TO SPECIFIER ** Topcoat is not CHPS compliant. Delete if not required.

Gloss: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Premium Durability, Latex:

Flat: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1201 topcoat.

Eggshell: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1403 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1407 topcoat.

Productivity, Latex:

** NOTE TO SPECIFIER ** Add Gripper Primer 3210 or Bond Prep Primer 3030 for Plaster (meets OTC and LEED requirements).

Flat: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 250 1200 topcoat.

Eggshell: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 250 1402 topcoat.

Semi-Gloss: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 250 1406 topcoat.

Gloss: 1 coat PVA Wall 1030 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat High Hide 1000 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat High Hide 1000 primer, 2 coats Lifemaster Oil 1508 topcoat.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** 4426 and 4428 comply with CHPS requirements. For gypsum drywall use High Hide 1000 Primer as specified. For plaster substitute Bond Prep 3030 Primer. For smooth concrete and unglazed brick substitute Gripper 3210 Primer.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat High Hide 1000 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

10.

High Performance Coating, Epoxy:

Gloss: 1 coat High Hide 1000 primer, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

11.

Economy, Latex:

Flat: 1 coat PVA Standard 1090 primer, 2 coats ProMaster 1271 topcoat.

Eggshell: 1 coat PVA Standard 1090 primer, 2 coats ProMaster 1473 topcoat.

Semi-Gloss: 1 coat PVA Standard 1090 primer, 2 coats ProMaster 1477 topcoat.

12.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3006 topcoat.

13.

Productivity, Latex High Build:

** NOTE TO SPECIFIER ** Add Gripper Primer 3210 or Bond Prep Primer 3030 for Plaster, Smooth Concrete or Unglazed Brick (meets OTC and LEED requirements).

Flat: 2 topcoats Ultra-Hide 150 High-Build 1290 over prepared substrate.

Eggshell: 2 topcoats Ultra-Hide 150 High-Build 1472 over prepared substrate.

14.

Productivity, Latex High Build Texture Coating:

** NOTE TO SPECIFIER ** Add Gripper Primer 3210 or Bond Prep Primer 3030 for Plaster (meets OTC and LEED requirements).

Smooth: 1 coat PVA Wall 1030 primer, 2 coats Textured Coatings 3230-4330 topcoat.

Medium: 1 coat PVA Wall 1030 primer, 2 coats Textured Coatings 3230-4340 topcoat.

Coarse: 1 coat PVA Wall 1030 primer, 2 coats Textured Coatings 3230-4350 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

CMU, Concrete Block:

** NOTE TO SPECIFIER ** Systems 1-5 Comply with OTC, LEED and CHPS requirements. Systems 6-9 and 11-14 Comply with OTC and LEED requirements. System 10 Complies with OTC requirements. Delete systems not required.

Premium Durability, No VOC Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Diamond 450 No VOC 7100 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Diamond 450 No VOC 7200 topcoat.

LoLustre (Satin): 1 coat Block Filler 3010 primer, 2 coats Diamond 450 No VOC 7300 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats No VOC 7400 topcoat.

Sustainability, No VOC Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Lifemaster No VOC 9100 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Lifemaster No VOC 9300 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster No VOC 9200 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster No VOC 9400 topcoat.

High Performance Coating, Water-Based Acrylic:

** NOTE TO SPECIFIER ** For CHPS Requirements Substitute Block Filler 3010 Primer for Bloxil 4000 Primer.

Eggshell: 1 coat Devoe Coatings Bloxfil 4000 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Bloxfil 4000 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4216V topcoat.

Sustainability, No VOC Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide No VOC 1209 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide No VOC 1411 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide No VOC 1415 topcoat.

Productivity, Latex:

** NOTE TO SPECIFIER ** For CHPS Projects Delete 1433 and 3038 Topcoats.

Flat: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 1210 topcoat.

Low Sheen Eggshell: 1 coat Block Filler 3010 030 primer, 2 coats Ultra-Hide 150 1410 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 1412 topcoat.

LoLustre (Satin): 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 1433 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 1416 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Premium Durability, Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Diamond 350 1201 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Diamond 350 1403 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Diamond 350 1407 topcoat.

Productivity, Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 1200 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 1402 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 1406 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Oil 1508 topcoat.

** NOTE TO SPECIFIER ** For High Performance System in Wet Areas Substitute Tru-Glaze WB Epoxy Blockfiller 4015 for Bloxfil 4000 Primer in Systems 9 and 10. 4015 is not CHPS compliant.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** 4426 and 4428 comply with CHPS requirements when Block Filler 3010 primer substitute for Bloxfil 4000 primer.

Semi-Gloss: 1 coat Devoe Coatings Bloxfil 4000 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat Devoe Coatings Bloxfil 4000 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

10.

High Performance Coating, Epoxy:

Gloss: 1 coat Devoe Coatings Bloxfil 4000 primer, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

11.

Economy, Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats ProMaster 1271 topcoat.

Eggshell: 1 coat Block Filler 3010 primer, 2 coats ProMaster 1473 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats ProMaster 1477 topcoat.

12.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Block Filler 3010, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Accents 3006 topcoat.

13.

Productivity, Latex High Build:

Flat: 1 coat Block Filler 3010 primer, 2 topcoats Ultra-Hide 150 High-Build 1290.

Eggshell: 1 coat Block Filler 3010 primer, 2 topcoats Ultra-Hide 150 High-Build 1472.

14.

Productivity, Latex High Build Texture Coating:

Smooth: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4330 topcoat.

Medium: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4340 topcoat.

Coarse: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4350 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Concrete Floors, Metal Decking, Metal Catwalks, Metal Stairs, Wood Floors, Wood Decking, Wood Porches, Wood Steps:

** NOTE TO SPECIFIER ** Systems 1, 2a, 2b, 3, 4 and 6 Comply with OTC and LEED requirements. System 5 Comply with OTC requirements. For CONCRETE use ONLY Systems 1-5; For WOOD use ONLY Systems 1 and 4-6; For METAL use ONLY Systems 1 and 4-5. Delete systems not required.

Productivity, Acrylic Latex:

Satin: 1 coat Acrylic Floor Enamel 3018 primer, 2 coats Acrylic Floor Enamel 3018 topcoat.

Productivity, Water-Based Clear Sealer:

Satin: 2 topcoats Clear Acrylic Sealer 3214 over prepared substrate.

Gloss: 2 topcoats Clear Urethane Acrylic Sealer 3218 over prepared substrate.

Productivity, Water-Based Concrete Stain:

Satin: 2 topcoats Concrete Stain 3610 over prepared substrate.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** Complies with OTC and LEED requirements. For Concrete Floors, Non-Ferrous Metal and Wood Substrates Delete Tru-Glaze WB 4030 Primer and Substitute Devran 203 Primer.

Semi-Gloss: 1 coat Devoe Coatings Tru-Glaze WB 4030 Primer -or- 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4426, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat Devoe Coatings Tru-Glaze WB 4030 Primer -or- 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4428, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

High Performance Coating, Epoxy:

** NOTE TO SPECIFIER ** Complies with OTC requirements. For LEED Compliance Substitute Tru-Glaze 4508H Topcoat with Devran 224HS Topcoat. For Concrete Floors Substrates, LEED and OTC Compliance Delete Tru-Glaze WB 4030 Primer and Substitute Devran 203 Primer. For Concrete Floors Substrates, LEED and OTC Compliance Delete Tru-Glaze 4508 Topcoat and Substitute Devran 224 HS-V topcoat. For Non-Ferrous Metal Substrates, LEEDand OTC Compliance Delete Devoe Coatings Tru-Glaze WB 4030 Primer and Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 Primer and Substitute Devran 203 Primer or 224 HS-V Primer.

Gloss: 1 coat Devoe Coatings Tru-Glaze WB 4030 Primer -or- 1 coat Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

Productivity, Water-Based Varnish:

Satin: 1 coat Woodpride Semi-Transparent 1700V primer, 2 coats Woodpride Varnish 1802 topcoat.

Gloss: 1 coat Woodpride Semi-Transparent 1700V primer, 2 coats Woodpride Varnish 1808 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Acoustical Plaster, Acoustical Tile:

** NOTE TO SPECIFIER ** Systems 1-4 Comply with OTC, LEED and CHPS requirements; System 5 and 6 comply with OTC and LEED requirements. Delete systems not required.

Premium Durability, Acrylic Latex:

Flat: 2 topcoats Diamond 450 No VOC 7100 over prepared substrate.

Sustainability, No VOC Acrylic Latex:

Flat: 2 topcoats Lifemaster No VOC 9100 over prepared substrate.

Sustainability, No VOC Latex:

Flat: 2 topcoats Ultra-Hide No VOC 1209 topcoat.

Productivity, Latex:

Flat: 2 topcoats Ultra-Hide 150 1210 over prepared substrate.

Premium Durability, Acrylic Latex:

Flat: 2 topcoats Diamond 350 1201 over prepared substrate.

Productivity, Acrylic Latex:

Flat: 2 topcoats Ultra-Hide 250 1200 over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Wood Paneling, Trim, Doors, Cabinets:

** NOTE TO SPECIFIER ** Systems 1-5 and 9 Comply with OTC, LEED and CHPS requirements. Systems 6-8 and 11-13 Comply with OTC and LEED requirements. System 10 Complies with OTC requirements. Delete systems not required.

Premium Durability, Acrylic Latex:

Flat: 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7100 topcoat.

Eggshell: 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7200 topcoat.

LoLustre (Satin): 1 coat High Hide 1000 primer, 2 coats Diamond 450 No VOC 7300 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats No VOC 7400 topcoat.

Sustainability, No VOC Acrylic Latex:

Flat: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9100 topcoat.

Eggshell: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9300 topcoat.

Semi-Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9200 topcoat.

Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Lifemaster No VOC 9400 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Gripper 3210 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4216 topcoat.

Sustainability, No VOC Latex:

Flat: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1209 topcoat.

Eggshell: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1411 topcoat.

Semi-Gloss: 1 coat Lifemaster No VOC 9116 primer, 2 coats Ultra-Hide No VOC 1415 topcoat.

Productivity, Latex:

** NOTE TO SPECIFIER ** For CHPS Projects Delete 1433 and 3038 Topcoats.

Flat: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 1210 topcoat.

Low Sheen Eggshell: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 1410 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 1412 topcoat.

LoLustre (Satin): 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 1433 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 1416 topcoat.

Gloss: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Premium Durability, Latex:

Flat: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1201 topcoat.

Eggshell: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1403 topcoat.

Semi-Gloss: 1 coat High Hide 1000 primer, 2 coats Diamond 350 1407 topcoat.

Productivity, Latex:

Flat: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 250 1200 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 250 1402 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 250 1406 topcoat.

Gloss: 1 coat Gripper 3210 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Gripper 3210 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Gripper 3210 primer, 2 coats Lifemaster Oil 1508 topcoat.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** 4426 and 4428 comply with CHPS requirements as specified.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat Gripper 3210 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

10.

High Performance Coating, Epoxy:

Gloss: 1 coat Gripper 3210 primer, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

11.

Economy, Latex:

Flat: 1 coat Gripper 3210 primer, 2 coats ProMaster 1271 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats ProMaster 1473 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats ProMaster 1477 topcoat.

12.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3006 topcoat.

13.

Productivity, Water-Based Varnish:

Satin: 1 coat Woodpride Semi-Transparent 1700V primer, 2 coats Woodpride Varnish 1802 topcoat.

Gloss: 1 coat Woodpride Semi-Transparent 1700V primer, 2 coats Woodpride Varnish 1808 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Unprimed Ferrous Metal, Galvanized Metal and Aluminum; Handrails and Risers:

** NOTE TO SPECIFIER ** Systems 1-5 Comply with OTC, LEED and CHPS requirements. Systems 6-9 and 11-12 Comply with OTC and LEED requirements. Systems 10 and 15 Comply with OTC requirements. Systems 13, 14, 16, 17 Comply with OTC requirements as described with the notes within the systems below. Delete systems not required.

Premium Durability, No VOC Acrylic Latex:

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 450 No VOC 7100 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 450 No VOC 7200 topcoat.

LoLustre (Satin): 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 450 No VOC 7300 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats No VOC 7400 topcoat.

Sustainability, No VOC Acrylic Latex:

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster No VOC 9100 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster No VOC 9300 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster No VOC 9200 topcoat.

Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster No VOC 9400 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Devoe Coatings Devflex WB Acrylic 4216V topcoat.

Sustainability, No VOC Latex:

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide No VOC 1209 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide No VOC 1411 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide No VOC 1415 topcoat.

Productivity, Latex:

** NOTE TO SPECIFIER ** For CHPS Projects Delete 1433 and 3038 Topcoats.

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 1210 topcoat.

Low Sheen Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 1410 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 1412 topcoat.

LoLustre (Satin): 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 1433 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 1416 topcoat.

Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Premium Durability, Latex:

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 350 1201 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 350 1403 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Diamond 350 1407 topcoat.

Productivity, Latex:

Flat: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 250 1200 topcoat.

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 250 1402 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 250 1406 topcoat.

Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Devoe Coatings Devflex DTM 4020 primer, 2 coats Lifemaster Oil 1508 topcoat.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** 4426 and 4428 comply with CHPS requirements as specified.

Semi-Gloss: 1 coat Devoe Coatings Devran 203 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat Devoe Coatings Devran 203 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

10.

High Performance Coating, Epoxy:

** NOTE TO SPECIFIER ** Complies with OTC requirements. For LEED and OTC Compliance Substitute Devoe Coatings TRU-GLAZE WB Epoxy 4030 primer with Devran 203 primer. For LEED and OTC Compliance Substitute Tru-Glaze 4508H Topcoat with Devran 224HS Topcoat.

Gloss: 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4030 primer, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

11.

Economy, Latex:

Flat: 1 coat Gripper 3210 primer, 2 coats ProMaster 1271 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats ProMaster 1473 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats ProMaster 1477 topcoat.

12.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Gripper 3210 primer, 2 coats Lifemaster Accents 3006 topcoat.

** NOTE TO SPECIFIER ** For OTC Compliance in Systems 13-14 and 16-17 Delete Devguard 4160 Primer and Substitute Devguard 4360 Primer.

13.

Premium Durability, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete 1507 Alkyd Topcoat and Substitute Devguard 4306 Rust Preventative Semi-Gloss Enamel.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 1507 topcoat.

14.

Productivity, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete 1512/1516 Alkyd Topcoats and Substitute Devguard 4303/4306 Rust Preventative Eggshell and Semi-Gloss Enamels.

Eggshell: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 1512 topcoat.

Semi-Gloss:1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 1516 topcoat.

15.

High Performance Coating, Alkyd Rust Preventative:

** NOTE TO SPECIFIER ** Complies with OTC requirements.

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal Primer 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4303 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal Primer 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4306 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal Primer 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4309 topcoat.

16.

High Performance Coating, Alkyd Industrial Enamel:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4308 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVGUARD Industrial Enamel 4308 topcoat.

17.

High Performance Coating, Alkyd-Urethane:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4328 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Shop Primed Ferrous Metal, Machinery, Equipment and Fixtures:

** NOTE TO SPECIFIER ** Systems 1-5 Comply with OTC, LEED and CHPS requirements. Systems 6-9 and 11 Comply with OTC and LEED requirements. System 10 and 14 Comply with OTC requirements as described within the notes. System 10 Complies with LEED requirements as described within the notes. Systems 12, 13, 15, 16 Comply with OTC requirements as described within the notes. Delete systems not required.

Premium Durability, No VOC Acrylic Latex:

Semi-Gloss: 2 topcoats Diamond 450 No VOC 7400 over prepared substrate.

Sustainability, No VOC Acrylic Latex:

Semi-Gloss: 2 topcoats Lifemaster No VOC 9200 over prepared substrate.

Gloss: 2 topcoats Lifemaster No VOC 9400 over prepared substrate.

High Performance Coating, Water-Based Acrylic:

Eggshell: 2 topcoats Devoe Coatings DEVFLEX WB Acrylic 4212 over prepared substrate.

Semi-Gloss: 2 topcoats Devoe Coatings DEVFLEX WB Acrylic 4216 over prepared substrate.

Sustainability, No VOC Latex:

Eggshell: 2 topcoats Ultra-Hide No VOC 1411 over prepared substrate.

Semi-Gloss: 2 topcoats Ultra-Hide No VOC 1415 over prepared substrate.

Productivity, Latex:

Semi-Gloss: 2 topcoats Ultra-Hide 150 1416 over prepared substrate.

** NOTE TO SPECIFIER ** For CHPS Projects Delete the 3038 Topcoat.

Gloss: 2 topcoats Ultra-Hide 150 3038 over prepared substrate.

Premium Durability, Latex:

Semi-Gloss: 2 topcoats Diamond 350 1407 over prepared substrate.

Productivity, Latex:

Semi-Gloss: 2 topcoats Ultra-Hide 250 1406 over prepared substrate.

Gloss: 2 topcoats Ultra-Hide 250 3028 over prepared substrate.

Sustainability, Water-Based Oil:

Eggshell: 2 topcoats Lifemaster Oil 1502 over prepared substrate.

Semi-Gloss: 2 topcoats Lifemaster Oil 1506 over prepared substrate.

Gloss: 2 topcoats Lifemaster Oil 1508 over prepared substrate.

High Performance Coating, Water-Based Epoxy:

** NOTE TO SPECIFIER ** 4426 and 4428 comply with CHPS requirements as specified.

Semi-Gloss:2 topcoats Devoe Coatings TRU-GLAZE WB Epoxy 4426 over prepared substrate.

Gloss: 2 topcoats Devoe Coatings TRU-GLAZE WB Epoxy 4428 over prepared substrate.

10.

High Performance Coating, Epoxy:

** NOTE TO SPECIFIER ** Complies with OTC requirements. For LEED Compliance Substitute Tru-Glaze 4508H Topcoat with Devran 224HS Topcoat. For Non-Ferrous Metal Substrates Delete Tru-Glaze 4508 Topcoat and Substitute Bar Rust 231V Multi-Purpose Epoxy.

Gloss: 2 topcoats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 over prepared substrate.

11.

Sustainability, Acrylic Latex Accent Colors:

Semi-Gloss: 2 topcoats Lifemaster Accents 3006 over prepared substrate.

12.

Premium Durability, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete 1507 Alkyd Topcoat and Substitute Devguard 4306 Rust Preventative Semi-Gloss Enamel.

Semi-Gloss: 2 topcoats Alkyd 1507 over prepared substrate.

13.

Productivity, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete 1512/1516 Alkyd Topcoats and Substitute Devguard 4303/4306 Rust Preventative Eggshell and Semi-Gloss Enamels.

Eggshell: 2 topcoats Alkyd 1512 over prepared substrate.

Semi-Gloss: 2 topcoats Alkyd 1516 over prepared substrate.

14.

High Performance Coating, Alkyd Rust Preventative:

** NOTE TO SPECIFIER ** Complies with OTC requirements.

Eggshell: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative Enamel 4303 over prepared substrate.

Semi-Gloss: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative Enamel 4306 over prepared substrate.

Gloss: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative Enamel 4309 over prepared substrate.

15.

High Performance Coating, Alkyd Industrial Enamel:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4308 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel.

Gloss: 2 topcoats Devoe Coatings DEVGUARD Industrial Enamel 4308 over prepared substrate.

16.

High Performance Coating, Alkyd-Urethane:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4328 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 2 topcoats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Decking and Overhead Ceiling Structure (Pre-Primed / Pre-Finished and Unprimed Ferrous) and Bar Joists (Shop Primed and Unprimed):

** NOTE TO SPECIFIER ** Systems 1, 3, 4, 7, 8 and 9 Comply with OTC requirements. Systems 3, 8 and 9 Comply with LEED requirements as noted below. System 3 Complies with CHPS requirements. For Pre-Primed, Pre-Finished Substrates Delete Primer Coat but Perform Surface Passivation Test and/or Check for Compatibility of Topcoat before Proceeding. Delete systems not required.

Productivity, Water-Based Acrylic Dry Fall:

** NOTE TO SPECIFIER ** For LEED Compliance Delete Devguard 4360 Primer and Substitute Devflex 4020 DTM Primer.

Flat: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats WB Dry Fall 1280 topcoat.

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats WB Dry Fall 1482 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats WB Dry Fall 1486 topcoat.

Productivity, Alkyd Dry Fall:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4160 Primer and Substitute Devguard 4360 Low VOC Universal Primer.

Flat: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats SB Dry Fall 1380 topcoat.

Eggshell: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats SB Dry Fall 1582 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats SB Dry Fall 1586 topcoat.

High Performance Coating, Water-Based Acrylic:

Flat: 1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX DTM 4020 topcoat.

Eggshell: 1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX WB Acrylic 4216 topcoat.

High Performance Coating, Alkyd Rust Preventative:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4303 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4306 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative Enamel 4309 topcoat.

High Performance Coating, Alkyd Industrial Enamel:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4160 Primer and Substitute Devguard 4360 Primer; For OTC Compliance Delete Devguard 4308 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVGUARD Industrial Enamel 4308 topcoat.

High Performance Coating, Alkyd-Urethane:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4328 Enamel and Substitute Devguard 4309 Rust Preventative Gloss Enamel or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 topcoat.

High Performance Coating, Single Component Modified Epoxy:

Flat: 1 coat Uni-Grip Modified Epoxy Flay Dryfall Primer/Finish 4380.

Eggshell: 1 coat Uni-Grip Modified Epoxy Flay Dryfall Primer/Finish 4382.

High Performance Coating, Water-Based Epoxy:

Semi-Gloss: 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4030 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4426 topcoat.

Gloss: 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4030 primer, 2 coats Devoe Coatings TRU-GLAZE WB Epoxy 4428 topcoat.

High Performance Coating, Epoxy:

** NOTE TO SPECIFIER ** Complies with OTC requirements. For LEED Compliance Substitute Tru-Glaze 4508H Topcoat with Devran 224HS Topcoat.

Gloss: 1 coat Devoe Coatings TRU-GLAZE WB Epoxy 4030 primer, 2 coats Devoe Coatings TRU-GLAZE Chemical Resistant Epoxy 4508 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Galvanized Decking and Overhead Ceiling Structure:

** NOTE TO SPECIFIER ** Systems 1-4 Comply with OTC requirements. Systems 1 and 3 Comply with LEED requirements. System 3 Complies with CHPS requirements. Delete systems not required.

Productivity, Water-Based Acrylic Dry Fall:

Flat: 2 topcoats WB Dry Fall1280 over prepared substrate.

Eggshell: 2 topcoats WB Dry Fall 1482 over prepared substrate.

Semi-Gloss: 2 topcoats WB Dry Fall 1486 over prepared substrate.

Productivity, Alkyd Dry Fall:

Flat: 2 topcoats SB Dry Fall 1370 over prepared substrate.

Eggshell: 1 coat SB Dry Fall 1370 primer, 2 coats SB Dry Fall 1582 topcoat.

Semi-Gloss: 1 coat SB Dry Fall 1370 primer, 2 coats SB Dry Fall 1586 topcoat.

High Performance Coating, Water-Based Acrylic:

Flat: 1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX DTM 4020 topcoat.

Eggshell:1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX DTM 4020 primer, 2 coats Devoe Coatings DEVFLEX WB Acrylic 4216 topcoat.

High Performance Coating, Single Component Modified Epoxy:

Flat: 1 coat Uni-Grip Modified Epoxy Flay Dryfall Primer/Finish 4380.

Eggshell: 1 coat Uni-Grip Modified Epoxy Flay Dryfall Primer/Finish 4382.

** NOTE TO SPECIFIER ** Delete if not required.

2.4

EXTERIOR FINISH SCHEDULE

** NOTE TO SPECIFIER ** LEED and CHPS only apply inside the Building Envelope; All Products on Exterior assumed OTC Compliant for Exterior except as otherwise noted. Delete if not required.

Poured or Pre-Cast Concrete, Stucco, Brick:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6407 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2406 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3006 topcoat.

Productivity, Latex High Build Texture Coating:

Smooth: 1 coat Hydrosealer 6001 primer, 2 coats Textured Coatings 3230-4330 topcoat.

Medium: 1 coat Hydrosealer 6001 primer, 2 coats Textured Coatings 3230-4340 topcoat.

Coarse: 1 coat Hydrosealer 6001 primer, 2 coats 3230-4350 topcoat.

Durability, Elastomeric:

Smooth: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2260 topcoat.

Fine: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2270 topcoat.

Coarse: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2290 topcoat.

Productivity, Elastomeric:

Smooth: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 200 2221 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Hydrosealer 001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

10.

High Performance Coating, Urethane:

Gloss: 1 coat Devoe Coatings Devran 203 primer, 2 coats Devoe Coatings DEVTHANE Aliphatic Urethane Enamel 379 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

CMU, Cinder Block, Split Face Block:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Block Filler 3010 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Fortis 450 6407 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Block Filler 3010 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Fortis 350 2406 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Block Filler 3010 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Block Filler 3010 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Block Filler 3010 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell:1 coat Block Filler 3010 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Lifemaster Accents 3006 topcoat.

Productivity, Latex High Build Texture Coating:

Smooth: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4330 topcoat.

Medium: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4340 topcoat.

Coarse: 1 coat Block Filler 3010 primer, 2 coats Textured Coatings 3230-4350 topcoat.

Durability, Elastomeric:

Smooth: 1 coat Block Filler 3010 primer, 2 coats Decra-Flex 300 2260 topcoat.

Fine: 1 coat Block Filler 3010 primer, 2 coats Decra-Flex 300 2270 topcoat.

Coarse: 1 coat Block Filler 3010 primer, 2 coats Decra-Flex 300 2290 topcoat.

Productivity, Elastomeric:

Smooth: 1 coat Block Filler 3010 primer, 2 coats Decra-Flex 200 2221 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Block Filler 3010 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Block Filler 3010 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Cementitious Siding, Flexboard, Transite and Shingles:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6407 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2406 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3006 topcoat.

Productivity, Latex High Build Texture Coating:

Smooth:1 coat Hydrosealer 6001 primer, 2 coats Textured Coatings 3230-4330 topcoat.

Medium: 1 coat Hydrosealer 6001 primer, 2 coats Textured Coatings 3230-4340 topcoat.

Coarse: 1 coat Hydrosealer 6001 primer, 2 coats Textured Coatings 3230-4350 topcoat.

Durability, Elastomeric:

Smooth: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2260 topcoat.

Fine: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2270 topcoat.

Coarse: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 300 2290 topcoat.

Productivity, Elastomeric:

Smooth: 1 coat Hydrosealer 6001 primer, 2 coats Decra-Flex 200 2221 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Concrete Floors and Decking:

** NOTE TO SPECIFIER ** Delete systems not required.

Productivity, Acrylic Latex:

Satin: 1 coat Acrylic Floor Enamel 3018 primer, 2 coats Acrylic Floor Enamel 3018 topcoat.

Productivity, Water-Based Clear Sealer

Satin: 2 topcoats Clear Acrylic Sealer 3214 over prepared substrate.

Gloss: 2 topcoats Clear Urethane Acrylic 3218 over prepared substrate.

Productivity, Water-Based Concrete Stain

Satin: 2 topcoats Concrete Stain 3610 over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Wood Siding, T-1-11 Siding, Pressed Board, Hard Board, Particle Board:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6407 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2406 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3006 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1508 topcoat.

Productivity, Solid Color Stain:

Flat: 2 topcoats Flood SWF-SOLID over prepared substrate.

Productivity, Semi-Transparent Stain:

Flat: 2 topcoats Flood TWF-SEMI over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Wood Trim, Shutters, Sash, Doors, PVC Composition Trim Board:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 450 6407 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Fortis 350 2406 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Hydrosealer 6001 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Accents 3006 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Lifemaster Oil 1508 topcoat.

Productivity, Solid Color Stain:

Flat: 2 topcoats Flood SWF-SOLID over prepared substrate.

Productivity, Semi-Transparent Stain:

Flat: 2 topcoats Flood TWF-SOLID over prepared substrate.

High Performance Coating, Water-Based Acrylic

Eggshell: 1 coat Hydrosealer 6001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Hydrosealer 6001 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Wood Decks:

** NOTE TO SPECIFIER ** Delete systems not required.

Productivity, Acrylic:

Clear Matte: 2 topcoats Flood CWF Hardwoods over prepared substrate.

Low Luster: 1 coat Flood SPA-N-DECK Basecoat, 2 topcoats Flood SPA-N-DECK Topcoat.

Productivity, Oil/Water Blend:

Clear Matte: 2 topcoats Flood CWF-UV over prepared substrate.

Clear Matte: 2 topcoats Flood CWF-UV 5 over prepared substrate.

Productivity, Solid Color Stain:

Flat: 2 topcoats Flood SWF-SOLID over prepared substrate.

Productivity, Semi-Transparent Stain:

Flat: 2 topcoats Flood TWF-SEMI over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Wood Covered or Protected Flooring and Decking:

** NOTE TO SPECIFIER ** Delete systems not required.

Productivity, Acrylic Latex:

Satin: 1 coat Acrylic Floor Enamel 3018 primer, 2 coats Acrylic Floor Enamel 3018 topcoat.

Productivity, Acrylic:

Clear Matte: 2 topcoats Flood CWF Hardwoods over prepared substrate.

Low Luster: 1 coat Flood SPA-N-DECK Basecoat, 2 topcoats Flood SPA-N-DECK Topcoat.

Productivity, Oil/Water Blend:

Clear Matte: 2 topcoats Flood CWF-UV over prepared substrate.

Clear Matte: 2 topcoats Flood CWF-UV 5 over prepared substrate.

Productivity, Solid Color Stain:

Flat: 2 topcoats Flood SWF-SOLID over prepared substrate.

Productivity, Semi-Transparent Stain:

Flat: 2 topcoats Flood TWF-SEMI over prepared substrate.

** NOTE TO SPECIFIER ** Delete if not required.

Structural Iron and Ferrous Steel (Including Tanks and Water Towers):

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6407 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2406 topcoat.

Durability, 100 Percent Acrylic Latex:

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 1502412 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3006 topcoat.

Productivity, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4160 Primer and Substitute Devguard 4360 Low VOC Universal Primer. For OTC Compliance Delete 2516 Alkyd Semi-Gloss and Substitute Devguard 4306 Rust Preventative Semi-Gloss.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 2516 topcoat.

High Performance Coating, Water-Based Acrylic:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX Direct-to-Metal 4020 topcoat.

Eggshell: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

High Performance Coating, Alkyd Rust Preventative:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4303 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4306 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4309 topcoat.

10.

High Performance Coating, Alkyd Industrial Enamel:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4160 Primer and Substitute Devguard 4360 Low VOC Universal Primer. For OTC Compliance Delete Devguard 4308 Gloss and Substitute Devguard 4309 Rust Preventative Gloss or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVGUARD Industrial Enamel 4308 topcoat.

11.

High Performance Coating, Alkyd-Urethane:

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 topcoat.

12.

High Performance Coating, Urethane:

Gloss: 1 coat Devoe Coatings DEVRAN Universal Epoxy 201H primer, 2 coats Devoe Coatings DEVTHANE Aliphatic Urethane Enamel 379 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Miscellaneous Ferrous Metal (Including Railings, Catwalks, Fire Escapes):

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6407 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2406 topcoat.

Durability, 100 Percent Acrylic Latex:

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3006 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1508 topcoat.

Productivity, Alkyd:

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 2516 topcoat.

High Performance Coating, Water-Based Acrylic:

Eggshell: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

10.

High Performance Coating, Alkyd Rust Preventative:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4303 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4306 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4309 topcoat.

11.

High Performance Coating, Alkyd Industrial Enamel:

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVGUARD Industrial Enamel 4308 topcoat.

12.

High Performance Coating, Alkyd-Urethane:

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 topcoat.

13.

High Performance Coating, Urethane:

Gloss: 1 coat Devoe Coatings DEVRAN Universal Epoxy 201H primer, 2 coats Devoe Coatings DEVTHANE Aliphatic Urethane Enamel 379 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Shop Primed Metal Doors, Trim, Panels and Miscellaneous Surfaces:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Semi-Gloss: 2 topcoats Fortis 450 6407 over prepared substrate.

Premium Durability, 100 Percent Acrylic Latex:

Semi-Gloss: 2 topcoats Fortis 350 2406 over prepared substrate.

Durability, 100 Percent Acrylic Latex:

Gloss: 2 topcoats Ultra-Hide 250 3028 over prepared substrate.

Productivity, 100 Percent Acrylic Latex:

Semi-Gloss: 2 topcoats Ultra-Hide 150 2416 over prepared substrate.

Gloss: 2 topcoats Ultra-Hide 150 3038 over prepared substrate.

Economy, Acrylic Latex:

Satin: 2 topcoats Speed-Cote 2452 over prepared substrate.

Sustainability, Acrylic Latex Accent Colors:

Semi-Gloss:2 topcoats Lifemaster Accents 3006 over prepared substrate.

Sustainability, Water-Based Oil:

Eggshell: 2 topcoats Lifemaster Oil 1502 over prepared substrate.

Semi-Gloss: 2 topcoats Lifemaster Oil 1506 over prepared substrate.

Gloss: 2 topcoats Lifemaster Oil 1508 over prepared substrate.

Productivity, Alkyd:

** NOTE TO SPECIFIER ** For OTC Compliance Delete 2516 Alkyd Semi-Gloss and Substitute Devguard 4306 Rust Preventative Semi-Gloss

Semi-Gloss: 2 topcoats Alkyd 2516 over prepared substrate.

High Performance Coating, Water-Based Acrylic:

Eggshell: 2 topcoats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 over prepared substrate.

Semi-Gloss: 2 topcoats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 over prepared substrate.

10.

High Performance Coating, Alkyd Rust Preventative:

Eggshell: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative 4303 over prepared substrate.

Semi-Gloss: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative 4306 over prepared substrate.

Gloss: 2 topcoats Devoe Coatings DEVGUARD Rust Preventative 4309 over prepared substrate.

11.

High Performance Coating, Alkyd Industrial Enamel:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4308 Gloss and Substitute Devguard 4309 Rust Preventative Gloss or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 2 topcoats Devoe Coatings DEVGUARD Industrial Enamel 4308 over prepared substrate.

12.

High Performance Coating, Alkyd-Urethane:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4328 Gloss and Substitute Devguard 4309 Rust Preventative Gloss or Devguard 4348 Low VOC Alkyd Gloss Enamel.

Gloss: 2 topcoats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 over prepared substrate.

13.

High Performance Coating, Urethane:

Gloss: 1 coat Devoe Coatings DEVRAN Universal Epoxy 201H primer, 2 coats Devoe Coatings DEVTHANE Aliphatic Urethane Enamel 379

** NOTE TO SPECIFIER ** Delete if not required.

Non-Ferrous Galvanized, Aluminum, Copper:

** NOTE TO SPECIFIER ** Delete systems not required.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6201 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6403 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 450 6407 topcoat.

Premium Durability, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2200 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2402 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Fortis 350 2406 topcoat.

Durability, 100 Percent Acrylic Latex:

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 250 3028 topcoat.

Productivity, 100 Percent Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2210 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2412 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 2416 topcoat.

Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Ultra-Hide 150 3038 topcoat.

Economy, Acrylic Latex:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Speed-Cote 2250 topcoat.

Satin: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Speed-Cote 2452 topcoat.

Sustainability, Acrylic Latex Accent Colors:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3000 topcoat.

Eggshell: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3002 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Lifemaster Accents 3006 topcoat.

Sustainability, Water-Based Oil:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1502 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1506 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Lifemaster Oil 1508 topcoat.

Productivity, Alkyd:

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Alkyd 2516 topcoat.

High Performance Coating, Water-Based Acrylic:

Flat: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX Direct-to-Metal 4020 topcoat.

Eggshell: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4212 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVFLEX Direct-to-Metal 4020 primer, 2 coats Devoe Coatings DEVFLEX High Performance WB Acrylic 4216 topcoat.

10.

High Performance Coating, Alkyd Rust Preventative:

Eggshell: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4303 topcoat.

Semi-Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4306 topcoat.

Gloss: 1 coat Devoe Coatings DEVGUARD Low VOC Universal 4360 primer, 2 coats Devoe Coatings DEVGUARD Rust Preventative 4309 topcoat.

11.

High Performance Coating, Alkyd Industrial Enamel:

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVGUARD Industrial Enamel 4308 topcoat.

12.

High Performance Coating, Alkyd-Urethane:

** NOTE TO SPECIFIER ** For OTC Compliance Delete Devguard 4160 Primer and Substitute Devguard 4360 Low VOC Universal Primer. For OTC Compliance Delete Devguard 4328 Gloss and Substitute Devguard 4309 Rust Preventative Gloss or Devguard 4348 Low VOC Gloss Enamel.

Gloss: 1 coat Devoe Coatings DEVGUARD Multipurpose Tank and Structural 4160 primer, 2 coats Devoe Coatings DEVSHIELD Alkyd Urethane 4328 topcoat.

13.

High Performance Coating, Urethane:

Gloss: 1 coat Devoe Coatings DEVRAN Universal Epoxy 201H primer, 2 coats Devoe Coatings DEVTHANE Aliphatic Urethane Enamel 379 topcoat.

** NOTE TO SPECIFIER ** Delete if not required.

Built-up and Gravel Roof Systems or Urethane Foam Roofing:

** NOTE TO SPECIFIER ** Delete systems not required.

Productivity, 100 Percent Acrylic Elastomeric:

Smooth: 2 topcoats 100 Percent Acrylic Elastomeric 2070 over prepared substrate.

Acrylic Copolymer Elastomeric:

Smooth: 2 topcoats Acrylic Copolymer 2071 over prepared substrate.

PART 3

EXECUTION

3.1

EXAMINATION

Do not begin installation until substrates have been properly prepared; notify Architect of unsatisfactory conditions before proceeding. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

Proceed with work only after conditions have been corrected and approved by all parties, otherwise application of coatings will be considered as an acceptance of surface conditions.

3.2

SURFACE PREPARATION

General: Surfaces shall be dry and in sound condition. Remove oil, dust, dirt, loose rust, peeling paint or other contamination to ensure good adhesion.

Remove mildew before painting by washing with a solution of 1 part liquid household bleach and 3 parts of warm water. Apply the solution and scrub the mildewed area. Allow the solution to remain on the surface for 10 minutes. Rinse thoroughly with clean water and allow the surface to dry 48 hours before painting. Wear protective glasses or goggles, waterproof gloves, and protective clothing. Quickly wash off any of the mixture that comes in contact with your skin. Do not add detergents or ammonia to the bleach/water solution.

Remove items including but not limited to thermostats, electrical outlets, switch covers and similar items prior to painting. After completing painting operations in each space or area, reinstall items removed using workers skilled in the trades involved.

** NOTE TO SPECIFIER ** Delete substrates not required.

Aluminum: Remove all oil, grease, dirt, oxide and other foreign material by cleaning per SSPC-SP1, Solvent Cleaning.

Block (Cinder and Concrete): Remove all loose mortar and foreign material. Surface shall be free of laitance, concrete dust, dirt, form release agents, moisture curing membranes, loose cement, and hardeners. Concrete and mortar shall be cured at least 30 days at 75 degrees F. The pH of the surface shall be between 6 and 9, unless the products are designed to be used in high pH environments. On tilt-up and poured-in-place concrete, commercial detergents and abrasive blasting may be necessary to prepare the surface. Fill bug holes, air pockets, and other voids with a cement patching compound.

Concrete, SSPC-SP13 or NACE 6: This standard gives requirements for surface preparation of concrete by mechanical, chemical, or thermal methods prior to the application of bonded protective coating or lining systems. The requirements of this standard are applicable to all types of cementitious surfaces including cast-in-place concrete floors and walls, precast slabs, masonry walls, and shotcrete surfaces. An acceptable prepared concrete surface shall be free of contaminants, laitance, loosely adhering concrete, and dust, and shall provide a sound, uniform substrate suitable for the application of protective coating or lining systems.

Cement Composition Siding/Panels: Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Existing peeled or checked paint shall be scraped and sanded to a sound surface. Pressure clean, if needed, with a minimum of 2100 psi pressure to remove all dirt, dust, grease, oil, loose particles, laitance, foreign material, and peeling or defective coatings. Allow the surface to dry thoroughly. The pH of the surface shall be between 6 and 9, unless the products are designed to be used in high pH environments.

Copper and Stainless Steel: Remove all oil, grease, dirt, oxide and other foreign material by cleaning per SSPC-SP 2, Hand Tool Cleaning.

Drywall Interior: Shall be clean and dry. All nail heads shall be set and spackled. Joints shall be taped and covered with a joint compound. Spackled nail heads and tape joints shall be sanded Smooth and all dust removed prior to painting.

Galvanized Metal: Clean per SSPC-SP1 using detergent and water or a degreasing cleaner to remove greases and oils. Apply a test area, priming as required. Allow the coating to dry at least one week before testing. If adhesion is poor, Brush Blast per SSPC-SP7 is necessary to remove these treatments.

Plaster: Shall be allowed to dry thoroughly for at least 30 days before painting, unless the products are designed to be used in high pH environments. Room shall be ventilated while drying; in cold, damp weather, rooms shall be heated. Damaged areas shall be repaired with an appropriate patching material. Bare plaster shall be cured and hard. Textured, soft, porous, or powdery plaster shall be treated with a solution of 1 pint household vinegar to 1 gallon of water. Repeat until the surface is hard, rinse with clear water and allow to dry.

Steel: Structural, Plate, and Similar Items: Shall be cleaned by one or more of the surface preparations as required by the manufacturer's requirements for the paint system scheduled.

Solvent Cleaning, SSPC-SP1:

Hand Tool Cleaning, SSPC-SP2: Before hand tool cleaning, remove visible oil, grease, soluble welding residues, and salts by the methods outlined in SSPC-SP1.

Power Tool Cleaning, SSPC-SP3: Before power tool cleaning, remove visible oil, grease, soluble welding residues, and salts by the methods outlined in SSPC-SP1.

White Metal Blast Cleaning, SSPC-SP5 or NACE 1: Before blast cleaning, visible deposits of oil or grease shall be removed by the methods specified in SSPC-SP1 or other agreed upon methods.

Commercial Blast Cleaning, SSPC-SP6 or NACE 3: Before blast cleaning, visible deposits of oil or grease shall be removed by the methods specified in SSPC-SP1 or other agreed upon methods.

Brush-Off Blast Cleaning, SSPC-SP7 or NACE 4: Before blast cleaning, visible deposits of oil or grease shall be removed by the methods specified in SSPC-SP 1 or other agreed upon methods.

Power Tool Cleaning to Bare Metal, SSPC-SP11: Prior to power tool surface preparation, remove visible deposits of oil or grease by methods specified in SSPC-SP1, Solvent Cleaning, or other agreed upon methods.

Near-White Blast Cleaning, SSPC-SP10 or NACE 2: A Near White Blast Cleaned surface, when viewed without magnification, shall be free of all visible oil, grease, dirt, dust, mill scale, rust, paint, oxides, corrosion products, and other foreign matter, except for staining. Staining shall be limited to no more than 5 percent of each square inch of surface area and may consist of light shadows, slight streaks, or minor discoloration caused by stains of rust, stains of mill scale, or stains of previously applied paint. Before blast cleaning, visible deposits of oil or grease shall be removed by the methods specified in SSPC-SP1 or other agreed upon methods.

High- and Ultra-High Pressure Water Jetting for Steel and Other Hard Materials: SSPC-SP12 or NACE 5:

10.

Water Blasting, SSPC-SP12/NACE No. 5: Removal of oil grease dirt, loose rust, loose mill scale, and loose paint by water at pressures of 2,000 to 2,500 psi at a flow of 4 to 14 gallons per minute.

Vinyl Siding, Architectural Plastics, and Fiberglass: Clean thoroughly by scrubbing with a warm, soapy water solution. Rinse thoroughly. Do not paint vinyl siding with any color darker than the original color, unless the product and color are designed for such use. Painting with darker colors may cause siding to warp.

Wood: Shall be clean and dry. Prime and paint as soon as possible. Knots and pitch streaks shall be scraped, sanded, and spot primed before a full priming coat is applied. Patch all nail holes and imperfections with a wood filler or putty and sand Smooth.

3.3

INSTALLATION

General: Apply all coatings and materials in accordance with manufacturer specifications. Mix and thin coatings according to manufacturer's recommendations.

Apply coatings using methods recommended by manufacturer.

Uniformly apply coatings without runs, drips, or sags, without brush marks, and with consistent sheen. Apply coatings at spreading rate required to achieve the manufacturers recommended dry film thickness.

Regardless of number of coats specified, apply as many coats as necessary for complete hide, and uniform appearance.

3.4

PROTECTION

Protect finished coatings from damage until completion of project.

Touch-up damaged coatings after substantial completion, following manufacturer's recommendation for touch up or repair of damaged coatings. Repair any defects that will hinder the performance of the coatings.

END OF SECTION