Download SECTION 10 28 16 ACCESSIBLE BATH ACCESSORIES for
WORD | RTF | Text | Word Perfect
Find over 500 more CSI Sections
on Arcat.com
Switch to Masterformat 95
 
SECTION 10 28 16
ACCESSIBLE BATH ACCESSORIES
 
 
Copyright 2012 - 2018 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Access-Able Designs, Inc.; benches, shower chairs, toilet benches, dressing benches, grab bars, pool lifts, spa lifts.
This section is based on the products of Access-Able Designs, Inc., which is located at:
8515 Waco Way
Vero Beach, FL 32968
Toll Free Tel: 877-853-7816
Fax: 772-872-3200
Email: request info (a.garrett@accessabledesigns.com)
Web: https://www.accessabledesigns.com
[ Click Here ] for additional information.
At Access-Able Designs, we offer some of the best, ADA compliant bath transfer benches in the industry. We don't stop there though. In addition to our bath transfer benches, we are also your number one source for shower benches, shower chairs, pool access chairs, spa lifts, pool lifts, dressing benches and so much more. We strive to offer the most complete line of handicap accessible products on the web and have been doing so for years. Start browsing through our website for more information on our bath transfer benches and all of our other products!
Our goal at Access-Able Designs is to make your world accessible. Whether it's making the transition from your wheelchair to the bathtub easier or giving you the opportunity to enjoy the benefits of a spa without requiring assistance from others, we constantly aim to make your life easier. Remember, most of our products are ADA compliant so you can have the peace of mind that you are purchasing a product of the highest quality. Contact us today to learn more about our handicap bath benches and the rest of our products!
 
PART 1 GENERAL
 
1.1
SECTION INCLUDES
 
** NOTE TO SPECIFIER ** Delete items below not required for project.
 
A.
Bath Transfer Benches:
1.
Bathtub benches. (Model SH-411)
2.
Rear mount tub transfer benches without legs. (Model SH-414)
3.
Tub transfer benches. (Model SH-414-2SD)
4.
Tub transfer benches. (Model SH-414-L)
5.
Portable tub/shower transfer benches. (Model SH-415)
6.
Portable clamp-on tub seats. (Model SH-416)
7.
Garden tub benches. (Model SH-421)
8.
Portable tub/shower transfer benches. (Model SH-425)
9.
Portable clamp-on tub seats. (Model SH-426)
10.
Wall mounted shower transfer benches. (Model SH-400)
11.
Shower transfer benches. (Model SH-400-2SDL)
12.
Wall mounted shower transfer benches. (Model SH-410)
13.
Shower transfer benches. (Model SH-410-2SDL)
14.
Shower transfer benches. (Model SH-420-2SDL)
B.
Dressing Benches:
1.
Adult dressing benches. (Model D-101)
2.
Child dressing benches. (Model CH-101)
3.
Stationary dressing benches. (Model DST-101)
C.
Grab bars.
D.
Pool Lifts:
1.
Pool lifts. (Revolution)
2.
Pool lifts. (Rational Series R-450R)
3.
Pool lifts. (Home Series H-300)
4.
Pool lifts. (Global Lift Rotational R-375)
5.
Pool lifts. (Global Lift Performance P-375)
6.
Pool lifts. (Global Lift Legend with Drop in Anchor)
7.
Pool lifts. (Global Lift Portable C-375)
8.
Pool lifts. (Global Lift Superior S-350)
9.
Pool lifts. (Global Lift Portable C-450-C450TPAPK)
10.
Pool lifts. (Global Lift Legend with Drop in Anchor)
11.
Pool lifts. (Ambassador)
12.
Pool lifts. (PRO Pool Lift)
13.
Pool lifts. (Ranger Pool Lift)
14.
Pool lifts. (Titan 600 Lift)
15.
Pool lifts. (Scout Lift)
16.
Portable pool lifts. (Patriot Portable Pro Pool Lift)
17.
In-ground, above deck, automatic, 180 degree turn pool lifts. (Model IGAT-180 AD)
18.
Pool lifts. (Model IGAT-90)
E.
Spa Lifts:
1.
Spa lifts. (The Spa Lift Ultra)
2.
Spa lifts. (The Spa Lift Elite)
3.
Above-ground spa lifts. (Model AG60)
4.
Above-ground, spa lifts, with 60 inch (1524 mm) clearance. (Model AG72)
1.2
RELATED SECTIONS
 
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
A.
Section 09 30 00 - Tiling.
B.
Section 10 26 16 - Bumper Guards.
C.
Section 10 28 00 - Toilet, Bath, and Laundry Accessories.
D.
Section 22 43 00 - Healthcare Plumbing Fixtures.
1.3
REFERENCES
A.
Americans with Disabilities Act (ADA).
1.4
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets for products specified, including but not limited to:
1.
Performance characteristics.
2.
Preparation instructions and recommendations.
3.
Storage and handling requirements and recommendations.
4.
Installation Instructions.
C.
Shop Drawings: Provide approved shop drawings showing locations of bath accessories in plan and elevation, with details including but not limited to components, anchorage requirements, accessories, tolerances and clearances.
1.5
QUALITY ASSURANCE
A.
Single Source Requirements: To the greatest extent possible, provide products specified in this section from a single manufacturer.
B.
Manufacturer's Qualifications: Successfully engaged in the manufacture of product specified in this section for at least 5 years.
1.6
DELIVERY, STORAGE AND HANDLING
A.
Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.
B.
Store products indoors in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.
1.7
PROJECT CONDITIONS
A.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
1.8
WARRANTY
A.
Manufacturer's Standard Limited Warranties:
 
** NOTE TO SPECIFIER ** 5 year warranty applies to all models with exceptions listed below. Delete the first subparagraphs below if selection one of the models mentioned the remaining subparagraphs.
 
1.
Warranty Period: Five years for materials and workmanship.
 
** NOTE TO SPECIFIER ** Limited lifetime structural warranty applies Titan 600 and Scout Pool Lifts.
 
2.
Warranty Period: Limited lifetime structural warranty.
 
** NOTE TO SPECIFIER ** 2 year structural warranty applies to Ranger Pool Lifts.
 
3.
Warranty Period: Two years for structural components.
 
** NOTE TO SPECIFIER ** The following applies to EZ Pool Lifts.
 
4.
Warranty Periods:
a.
Five years for structural components.
b.
One year for sling warranty.
PART 2 PRODUCTS
 
2.1
MANUFACTURERS
A.
Acceptable Manufacturer: Access-Able Designs, Inc., which is located at: 8515 Waco Way; Vero Beach, FL 32968; Toll Free Tel: 877-853-7816; Fax: 772-872-3200; Email: request info (a.garrett@accessabledesigns.com); Web: https://www.accessabledesigns.com
 
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
 
** NOTE TO SPECIFIER ** Delete article if not required.
 
2.2
BATH TRANSFER BENCHES
 
** NOTE TO SPECIFIER ** Delete models not required.
 
A.
Bathtub Benches: Model SH-411 Bathtub Benches as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 250 lb (113 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.
2.
Mounting Requirements: Minimum 2 inch (52 mm) wide tub ledges on both sides.
3.
Operation: Seat folds up when not in use, held in raised position by hinge bracket.
4.
Wall Brackets: Type 304 (18-8) stainless steel, 10 gauge hinge brackets with 3 factory drilled mounting holes.
5.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
6.
Seat Tops: As scheduled and indicated on Drawings.
7.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
8.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
9.
Seat Top Size: Custom, _____________.
10.
Seat Top Size: Custom, as indicated on Drawings.
11.
Seat Top Size: Standard, 29 inches W x 15 inches D (736 mm W x 381 mm D).
B.
Bathtub Benches: Model SH-414 Rear Mount Tub Transfer Benches Without Legs as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm).
2.
Weight Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.
3.
Mounting Requirements: Minimum of 2 inch (52 mm) tub ledges to rest on both sides.
4.
Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledges when seat top is lowered.
5.
Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledges and bars on seat bottom when in lowered position.
6.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge brackets.
7.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
8.
Seat Tops: As scheduled and indicated on Drawings.
9.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
10.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
11.
Seat Top Size: Custom, _____________.
12.
Seat Top Size: Custom, as indicated on Drawings.
13.
Seat Top Size: Standard, 29 inches W x 15 inches D (736 mm W x 381 mm D).
 
** NOTE TO SPECIFIER ** Use this seat with the fold-down legs when there is no inner ledge for the regular seat to rest on.
 
C.
Bathtub Benches: Model SH-414-2SD Tub Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm).
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
2.
Configuration: As indicated on Drawings.
3.
Configuration: Right hand.
4.
Configuration: Left hand.
5.
Weight Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.
6.
Mounting Requirements: Minimum of 2 inch (52 mm) tub ledge to rest on one side.
7.
Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledge when seat top is lowered. Locking pin automatically holds swing down leg in place.
8.
Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledge and bar on seat bottom when in lowered position.
9.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge brackets.
10.
Legs: Telescoping for height adjustment; Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
11.
Feet: Adjustable with locking nut, rubber, non-skid.
12.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
13.
Seat Tops: As scheduled and indicated on Drawings.
14.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
15.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
16.
Seat Top Size: Custom, _____________.
17.
Seat Top Size: Custom, as indicated on Drawings.
18.
Seat Top Size: Standard, 25 inches W x 15 inches D (635 mm W x 381 mm D).
D.
Bathtub Benches: Model SH-414-L Tub Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm).
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
2.
Configuration: As indicated on Drawings.
3.
Configuration: Right hand.
4.
Configuration: Left hand.
5.
Weight Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.
6.
Mounting Requirements: Minimum of 2 inch (52 mm) tub ledge to rest on both sides.
7.
Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledges when seat top is lowered.
8.
Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledges and bars underneath seat top when in lowered position.
9.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge brackets.
10.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
11.
Seat Tops: As scheduled and indicated on Drawings.
12.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
13.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
14.
Seat Top Size: Custom, _____________.
15.
Seat Top Size: Custom, as indicated on Drawings.
16.
Seat Top Size: Standard, 29 inches W x 15 inches D x 21 inches D (736 mm W x 381 mm D x 533 mm D).
E.
Bathtub Benches: Model SH-415 Portable Tub/Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 420 lb (190 kg), when used on substrates as recommended by manufacturer.
2.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
3.
Feet: Adjustable with locking nut, rubber, non-skid.
4.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
5.
Seat Tops: As scheduled and indicated on Drawings.
6.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
a.
Height: Adjustable, from 17 inches to 21 inches (431 mm to 533 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
7.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable, from 18-1/2 inches to 22-1/2 inches (469 mm to 571 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
8.
Seat Top Size: Custom, _____________.
9.
Seat Top Size: Custom, as indicated on Drawings.
10.
Seat Top Size: Standard, 30 inches W x 19 inches D (762 mm W x 482 mm D).
11.
Seat Back Size: 16 inches W x 7 inches H (406 mm W x 177 mm H).
F.
Bathtub Benches: Model SH-416 Portable Clamp-On Tub Seats as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 420 lb (190 kg), when mounted on tub ledge and used on substrates as recommended by manufacturer.
2.
Operation: Seat clamps to most standard tub walls.
3.
Mounting: 10 gauge stainless steel, rubber lined tub clamp, adjustable from 3-3/4 inches to 5-3/4 inches (95 mm to 146 mm).
4.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
5.
Feet: Adjustable with locking nut, rubber, non-skid.
6.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
7.
Seat Tops: As scheduled and indicated on Drawings.
8.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
a.
Height: Adjustable, from 12-3/4 inches to 14 inches (323 mm to 355 mm) above tub floor.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
9.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable, from 14-1/4 inches to 15-1/2 inches (361 mm to 393 mm) above tub floor.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
10.
Seat Top Size: Custom, _____________.
11.
Seat Top Size: Custom, as indicated on Drawings.
12.
Seat Top Size: Standard, 24 inches W x 15 inches D (609 mm W x 381 mm D).
G.
Bathtub Benches: Model SH-421 Garden Tub Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted to withstand required loads and on a tub with that allows seat height from 17 inches to 19 inches (431 mm to 482 mm).
2.
Weight Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.
3.
Mounting Requirements: Minimum of 2 inch (52 mm) tub ledges to rest on both sides.
4.
Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledge when seat top is lowered.
5.
Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledges and bars underneath seat top when in lowered position.
6.
Wall Brackets: Type 304 (18-8) stainless steel, 10 gauge hinge brackets with 3 factory drilled mounting holes.
7.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
8.
Seat Tops: As scheduled and indicated on Drawings.
9.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
10.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
11.
Seat Top Size: Custom, _____________.
12.
Seat Top Size: Custom, as indicated on Drawings.
13.
Seat Top Size: Standard, 39 inches W x 13-1/2 inches D (990 mm W x 342 mm D).
H.
Bathtub Benches: Model SH-425 Portable Tub/Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted on tub ledge to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm) and used on substrates as recommended by manufacturer.
2.
Weight Capacity: 420 lb (190 kg), when mounted on substrates as recommended by manufacturer.
3.
Mounting: STPA clamp assembly.
4.
Legs: Telescoping for height adjustment; Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
5.
Feet: Rubber, non-skid.
6.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
7.
Seat Tops: As scheduled and indicated on Drawings.
8.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, slats bolted to frame with stainless steel hardware.
a.
Height: Adjustable, from 17 inches to 21 inches (431 mm to 533 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
9.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable, from 18-1/2 inches to 22-1/2 inches (469 mm to 571 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
10.
Seat Top Size: Custom, _____________.
11.
Seat Top Size: Custom, as indicated on Drawings.
12.
Seat Top Size: Standard, 30 inches W x 16 inches D (762 mm W x 406 mm D).
13.
Seat Back Size: 16 inches W x 7 inches H (406 mm W x 177 mm D).
I.
Bathtub Benches: Model SH-426 Portable Clamp-On Tub Seat as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when mounted on tub ledge to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm) and used on substrates as recommended by manufacturer.
2.
Weight Capacity: 250 lb (113 kg), when mounted on substrates as recommended by manufacturer.
3.
Operation: Legs swing down, locking pin automatically holds legs in place; seat clamps to most standard tub walls.
4.
Mounting: Rubber lined tub clamp, adjustable from 3-3/4 inches to 5-3/4 inches (95 mm to 146 mm); 10 gauge stainless steel.
5.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
6.
Feet: Adjustable with locking nut, rubber, non-skid.
7.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
8.
Seat Tops: As scheduled and indicated on Drawings.
9.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, slats bolted to frame with stainless steel hardware.
a.
Height: Adjustable, from 15-1/2 inches to 17-1/2 inches (393 mm to 444 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
10.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable, from 17 inches to 19 inches (431 mm to 482 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
11.
Seat Top Size: Custom, _____________.
12.
Seat Top Size: Custom, as indicated on Drawings.
13.
Seat Top Size: Standard, 26.5 inches W x 15 inches D (673 mm W x 381 mm D).
 
** NOTE TO SPECIFIER ** Delete options for models not required.
 
J.
Shower Benches: Model AKW 2000 Compact Seat as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 350 lb (159 kg), when mounted on substrates as recommended by manufacturer.
2.
Operation: Seat and legs fold up when not in use.
3.
Frame: Powder coated aluminum.
4.
Feet: Latex free white rubber cap.
 
** NOTE TO SPECIFIER ** Folding armrest and back rest are optional. Delete options not required.
 
5.
Armrest: Folding.
6.
Backrest.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
7.
Colors: As scheduled and indicated on Drawings.
8.
Colors: ______.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Custom sizes up to 72 inches are available. Delete options for size not required.
 
9.
Seat Top Size: Custom, _____________.
10.
Seat Top Size: ______.
K.
Shower Benches: Model AKW 4000 Shower Seat as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 558 lb (253 kg), when mounted on substrates as recommended by manufacturer.
2.
Operation: Seat and legs fold up when not in use.
3.
Frame: Stainless steel.
4.
Feet: Latex free white rubber cap.
5.
Cushion: Removable, closed cell foam.
6.
Adjustable height.
 
** NOTE TO SPECIFIER ** Armrest and back rest are optional. Delete options not required.
 
7.
Armrest: Folding, padded.
8.
Backrest: Padded.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
9.
Colors: As scheduled and indicated on Drawings.
10.
Colors: ______.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Custom sizes up to 72 inches are available. Delete options for size not required.
 
11.
Seat Top Size: Custom, _____________.
12.
Seat Top Size: 24 inches.
L.
Shower Benches: Model SH-400 Wall Mounted Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
1.
Configuration: Right hand.
2.
Configuration: Left hand.
3.
Configuration: As indicated on Drawings.
4.
Weight Capacity: 250 lb (113 kg), when mounted on substrates as recommended by manufacturer.
5.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs.
6.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
7.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
8.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
9.
Seat Tops: As scheduled and indicated on Drawings.
10.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
11.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Custom sizes up to 72 inches are available. Delete options for size not required.
 
12.
Seat Top Size: Custom, _____________.
13.
Seat Top Size: Custom, as indicated on Drawings.
14.
Seat Top Size: 32 inches W x 21 inches D x 13-1/2 inches D (812 mm W x 533 mm D x 342 mm D).
15.
Seat Top Size: 26 inches W x 22-1/2 inches D (660 mm W x 572 mm D).
16.
Seat Top Size: 28 inches W x 22-1/2 inches D (711 mm W x 572 mm D).
17.
Seat Top Size: 30 inches W x 22-1/2 inches D (762 mm W x 572 mm D).
18.
Seat Top Size: 32 inches W x 22-1/2 inches D (813 mm W x 572 mm D).
19.
Seat Top Size: 34 inches W x 22-1/2 inches D (864 mm W x 572 mm D).
20.
Seat Top Size: 36 inches W x 22-1/2 inches D (914 mm W x 572 mm D).
M.
Shower Benches: Model SH-400-2SDL Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when seat top is at a height from 17 inches to 19 inches (431 mm to 482 mm) and mounted on substrates as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
2.
Configuration: Right hand.
3.
Configuration: Left hand.
4.
Configuration: As indicated on Drawings.
5.
Weight Capacity: 800 lb (362 kg), when mounted on substrates as recommended by manufacturer.
6.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs; support legs kept in alignment by stainless steel cross member.
7.
Legs: 4 per unit, adjustable, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
8.
Feet: Adjustable with locking nut, rubber, non-skid.
9.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
10.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
11.
Seat Tops: As scheduled and indicated on Drawings.
12.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
13.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Custom sizes up to 72 inches are available. Delete options for size not required.
 
14.
Seat Top Size: Custom, _____________.
15.
Seat Top Size: Custom, as indicated on Drawings.
16.
Seat Top Size: 32 inches W x 21 inches D x 13-1/2 inches D (812 mm W x 533 mm D x 342 mm D).
17.
Seat Top Size: 26 inches W x 22-1/2 inches D (660 mm W x 572 mm D).
18.
Seat Top Size: 28 inches W x 22-1/2 inches D (711 mm W x 572 mm D).
19.
Seat Top Size: 30 inches W x 22-1/2 inches D (762 mm W x 572 mm D).
20.
Seat Top Size: 32 inches W x 22-1/2 inches D (813 mm W x 572 mm D).
21.
Seat Top Size: 34 inches W x 22-1/2 inches D (864 mm W x 572 mm D).
22.
Seat Top Size: 36 inches W x 22-1/2 inches D (914 mm W x 572 mm D).
N.
Shower Benches: Model SH-410 Wall Mounted Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Frame: Type 304 (18-8) stainless steel.
2.
Weight Capacity: 250 lb (113 kg), when mounted on substrates as recommended by manufacturer.
3.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs.
4.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
5.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
6.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
7.
Seat Tops: As scheduled and indicated on Drawings.
8.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
9.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
10.
Seat Top Size: Custom, _____________.
11.
Seat Top Size: Custom, as indicated on Drawings.
12.
Seat Top Size: 15 inches W x 15 inches D (381 mm W x 381 mm D).
13.
Seat Top Size: 18 inches W x 15 inches D (457 mm W x 381 mm D).
14.
Seat Top Size: 22 inches W x 16 inches D (559 mm W x 406 mm D).
15.
Seat Top Size: 24 inches W x 16 inches D (610 mm W x 406 mm D).
O.
Shower Benches: Model SH-410-2SDL Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when seat top is at a height from 17 inches to 19 inches (431 mm to 482 mm) and mounted on substrates as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
2.
Configuration: Right hand.
3.
Configuration: Left hand.
4.
Configuration: As indicated on Drawings.
5.
Weight Capacity: 800 lb (362 kg), when mounted on substrates as recommended by manufacturer.
6.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs; support legs kept in alignment by stainless steel cross member.
7.
Legs: 4 per unit, adjustable, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
8.
Feet: Adjustable with locking nut, rubber, non-skid.
9.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
10.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
11.
Seat Tops: As scheduled and indicated on Drawings.
12.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
13.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
14.
Seat Top Size: Custom, _____________.
15.
Seat Top Size: Custom, as indicated on Drawings.
16.
Seat Top Size: 18 inches W x 13-1/2 inches D (457 mm W x 342 mm D).
17.
Seat Top Size: 18 inches W x 15 inches D (457 mm W x 381 mm D).
18.
Seat Top Size: 22 inches W x 16 inches D (559 mm W x 406 mm D).
19.
Seat Top Size: 24 inches W x 16 inches D (610 mm W x 406 mm D).
P.
Shower Benches: Model SH-420-2SDL Shower Transfer Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when seat top is at a height from 17 inches to 19 inches (431 mm to 482 mm) and mounted on substrates as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.
 
2.
Configuration: Right hand.
3.
Configuration: Left hand.
4.
Configuration: As indicated on Drawings.
5.
Weight Capacity: 800 lb (362 kg), when mounted on substrates as recommended by manufacturer.
6.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs; support legs kept in alignment by stainless steel cross member.
7.
Legs: 4 per unit, adjustable, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
8.
Feet: Adjustable with locking nut, rubber, non-skid.
9.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
10.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
11.
Seat Tops: As scheduled and indicated on Drawings.
12.
Seat Tops: Phenolic, 1/2 inch (13 mm) x 3 inch (76 mm) slats bolted to frame with stainless steel hardware.
a.
Height: Adjustable, from 15-1/2 inches to 17-1/2 inches (393 mm to 444 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
13.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable, from 17 inches to 19 inches (431 mm to 482 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Custom sizes up to 72 inches are available. Delete options for size not required.
 
14.
Seat Top Size: Custom, _____________.
15.
Seat Top Size: Custom, as indicated on Drawings.
16.
Seat Top Size: 32 inches W x 13-1/2 inches D (812 mm W x 342 mm D).
17.
Seat Top Size: 26 inches W x 16 inches D (660 mm W x 406 mm D).
18.
Seat Top Size: 28 inches W x 16 inches D (711 mm W x 406 mm D).
19.
Seat Top Size: 30 inches W x 16 inches D (762 mm W x 406 mm D).
20.
Seat Top Size: 32 inches W x 16 inches D (812 mm W x 406 mm D).
21.
Seat Top Size: 34 inches W x 16 inches D (864 mm W x 406 mm D).
 
** NOTE TO SPECIFIER ** Delete article not required.
 
2.3
DRESSING BENCHES
 
** NOTE TO SPECIFIER ** Delete models not required.
 
A.
Dressing Benches: Model D-101 Adult Dressing Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when seat top is at a height from 17 inches to 19 inches (431 mm to 482 mm) and mounted on substrates as recommended by manufacturer.
2.
Weight Capacity: 800 lb (362 kg), when mounted on substrates as recommended by manufacturer.
3.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs; support legs kept in alignment by stainless steel cross member.
4.
Support Hooks: 1 per unit.
5.
Legs: 4 per unit, adjustable, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
6.
Feet: Adjustable with locking nut, rubber, non-skid.
7.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
8.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
9.
Seat Tops: As scheduled and indicated on Drawings.
10.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: PW White.
c.
Colors: PA Almond.
d.
Colors: PT Teak.
11.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
a.
Colors: As scheduled and indicated on Drawings.
b.
Colors: NW White.
c.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
12.
Seat Top Size: Custom, _____________.
13.
Seat Top Size: Custom, as indicated on Drawings.
14.
Size: 48 inches W x 22-1/2 inches D (1219 mm W x 571 mm D).
 
** NOTE TO SPECIFIER ** The child dressing Bench has adjustable length legs allowing caregivers to stand upright while caring for a child.
 
B.
Dressing Benches: Model CH-101 Child Dressing Benches as manufactured by Access-Able Designs, Inc.
1.
Weight Capacity: 800 lb (362 kg), when mounted on substrates as recommended by manufacturer.
2.
Operation: Seat folds up when not in use, held in raised position by stainless cross member attached to support legs; support legs kept in alignment by stainless steel cross member.
3.
Support Hooks: 1 per unit.
4.
Legs: 4 per unit, adjustable, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.
5.
Feet: Adjustable with locking nut, rubber, non-skid.
6.
Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge.
7.
Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
8.
Seat Tops: As scheduled and indicated on Drawings.
9.
Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.
a.
Height: Adjustable from 34 inches to 36 inches (863 mm to 914 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
10.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable from 36 inches to 38 inches (914 mm to 965 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
11.
Seat Top Size: Custom, _____________.
12.
Seat Top Size: Custom, as indicated on Drawings.
13.
Seat Top Size: 48 inches W x 24 inches D (1219 mm W x 609 mm D).
 
** NOTE TO SPECIFIER ** Adult dressing bench to allow room for undressing in public rooms.
 
C.
Dressing Benches: Model DST-101 Stationary Dressing Benches as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when seat top is at a height from 17 inches to 19 inches (431 mm to 482 mm) and mounted on substrates as recommended by manufacturer.
2.
Weight Capacity: 500 lb (226 kg), when mounted on substrates as recommended by manufacturer.
3.
Legs: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1-1/4 inch (31 mm) tubing, heliarc welded to frame.
4.
Feet: Fixed.
5.
Backrest: removable.
6.
Main Seat Frame: One piece, heliarc welded, Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1-1/4 inch (31 mm) tubing.
 
** NOTE TO SPECIFIER ** Delete options for seat tops not required.
 
7.
Seat Tops: As scheduled and indicated on Drawings.
8.
Seat Tops: Phenolic, bolted to frame with stainless steel hardware.
a.
Height: Adjustable from 34 inches to 36 inches (863 mm to 914 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: PW White.
d.
Colors: PA Almond.
e.
Colors: PT Teak.
9.
Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.
a.
Height: Adjustable from 36 inches to 38 inches (914 mm to 965 mm).
 
** NOTE TO SPECIFIER ** Delete options for color not required.
 
b.
Colors: As scheduled and indicated on Drawings.
c.
Colors: NW White.
d.
Colors: NA Almond.
 
** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.
 
10.
Seat Top Size: Custom, _____________.
11.
Seat Top Size: Custom, as indicated on Drawings.
12.
Seat Top Size: 48 inches W x 24 inches D (1219 mm W x 609 mm D).
13.
Seat Back Size: 48 inches W x 24 inches H (1219 mm W x 609 mm H).
 
** NOTE TO SPECIFIER ** Applications: Bathroom grab bars, shower grab bars, bariatric grab bars. Delete article if not required.
 
2.4
GRAB BARS
A.
Grab Bars - General:
 
** NOTE TO SPECIFIER ** Delete if not required.
 
1.
Compliance: Products designed to meet ADA guidelines when mounted at heights and on substrates at heights as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** If the following subparagraph is retained, then delete all subsequent paragraphs in this article. Delete if individual models are selected subsequent paragraphs in this article.
 
2.
Series, Finish, Size and Type: Grab bars as scheduled and indicated on Drawings.
 
** NOTE TO SPECIFIER ** Fill in blank with designation for wall clearance or delete line as applicable. Delete options for wall clearance not required.
 
3.
Wall Clearance: _________.
4.
Wall Clearance: As scheduled and indicated on Drawings.
5.
Wall Clearance: 1/2 inch (12 mm).
6.
Flange Mountings: ADA compliant, Type 304 stainless steel construction, heliarc welded to bar to form single structural unit.
 
** NOTE TO SPECIFIER ** Delete flanges not required.
 
7.
Flange Style: As scheduled and indicated on Drawings.
8.
Flange Style: ER - Exposed screw flanges.
9.
Flange Style: EW - Exposed screw flanges.
10.
Flange Style: CR - Concealed screw flanges.
11.
Flange Style: CB - Concealed screw flanges.
 
** NOTE TO SPECIFIER ** Delete decorative concealed flange covers if not required.
 
12.
Decorative Concealed Flange Covers Style: As scheduled and indicated on Drawings.
13.
Decorative Concealed Flange Covers Style: Rope 2.
14.
Decorative Concealed Flange Covers Style: Ridge 3.
15.
Decorative Concealed Flange Covers Style: Step 4.
16.
Decorative Concealed Flange Covers Style: Band 5.
 
** NOTE TO SPECIFIER ** Delete grab bar models not required.
 
B.
Grab Bars: GS Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Satin. Materials: Type 304 stainless steel.
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings.
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GSS-120, 12 inches (304 mm).
b.
Product: Item GSS-160, 16 inches (406 mm).
c.
Product: Item GSS-180, 18 inches (457 mm).
d.
Product: Item GSS-240, 24 inches (609 mm).
e.
Product: Item GSS-300, 30 inches (762 mm).
f.
Product: Item GSS-320, 32 inches (812 mm).
g.
Product: Item GSS-360, 36 inches (914 mm).
h.
Product: Item GSS-420, 42 inches (1066 mm).
i.
Product: Item GSS-480, 48 inches (1219 mm).
4.
Series: M; straight bars with center post.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GSM-360, 36 inches (914 mm).
b.
Product: Item GSM-420, 42 inches (1066 mm).
c.
Product: Item GSM-480, 48 inches (1219 mm).
d.
Product: Item GSM-520, 52 inches (1320 mm).
e.
Product: Item GSM-540, 54 inches (1371 mm).
f.
Product: Item GSM-600, 60 inches (1524 mm).
5.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GST-160160, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GST-160320, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GST-240240, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GST-200400, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GST-240360, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GST-240480, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GST-300300, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GST-360360, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GST-360480, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GST-360540, 36 inches x 54 inches (914 mm x 1371 mm).
6.
Series: V; vertical angle bars.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GSV-160160, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GSV-200200, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GSV-240240, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GSV-300300, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GSV-160320, 16 inches x 32 inches (406 mm x 812 mm).
7.
Series: U; U shaped shower bars.
a.
Product: Item GSU-300360, 30 inches x 36 inches x 30 inches (762 mm x 914 mm x 762 mm).
b.
Product: Item GSU-300480, 30 inches x 48 inches x 30 inches (762 mm x 1219 mm x 762 mm).
c.
Product: Item GSU-300540, 30 inches x 54 inches x 30 inches (762 mm x 1372 mm x 762 mm).
d.
Product: Item GSU-300600, 30 inches x 60 inches x 30 inches (762 mm x 1524 mm x 762 mm).
8.
Series: D; drinking fountain bar.
a.
Product: Item GSD-330180, 33 inches x 18 inches (838 mm x 457 mm).
9.
Series: W; wall to floor bar.
a.
Product: Item GSW-330300, 33 inches x 30 inches (838 mm x 762 mm).
10.
Series: WR; wall to floor bars with side legs.
a.
Product: Item GSWR-330300, 33 inches x 30 inches (838 mm x 762 mm).
11.
Series: WL; wall to floor bars with side legs.
a.
Product: Item GSWL-330300, 33 inches x 30 inches (838 mm x 762 mm).
C.
Grab Bars: GX (Q) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Polished. Materials: Type 304 stainless steel. Diameter: 1-1/4 inches (32 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings.
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GXS-120-QCR, 12 inches (304 mm).
b.
Product: Item GXS-160-QCR, 16 inches (406 mm).
c.
Product: Item GXS-180-QCR, 18 inches (457 mm).
d.
Product: Item GXS-240-QCR, 24 inches (609 mm).
e.
Product: Item GXS-300-QCR, 30 inches (762 mm).
f.
Product: Item GXS-320-QCR, 32 inches (812 mm).
g.
Product: Item GXS-360-QCR, 36 inches (914 mm).
h.
Product: Item GXS-420-QCR, 42 inches (1066 mm).
i.
Product: Item GXS-480-QCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GXT-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GXT-160320-QCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GXT-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GXT-200400-QCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GXT-240360-QCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GXT-240480-QCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GXT-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GXT-360360-QCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GXT-360480-QCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GXT-360540-QCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GXV-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GXV-200200-QCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GXV-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GXV-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GXV-160320-QCR, 15 inches x 32 inches (381 mm x 812 mm).
D.
Grab Bars: GX (H) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Polished. Materials: Type 304 stainless steel. Diameter: 1-1/2 inches (39 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GXS-120-HCR, 12 inches (304 mm).
b.
Product: Item GXS-160-HCR, 16 inches (406 mm).
c.
Product: Item GXS-180-HCR, 18 inches (457 mm).
d.
Product: Item GXS-240-HCR, 24 inches (609 mm).
e.
Product: Item GXS-300-HCR, 30 inches (762 mm).
f.
Product: Item GXS-320-HCR, 32 inches (812 mm).
g.
Product: Item GXS-360-HCR, 36 inches (914 mm).
h.
Product: Item GXS-420-HCR, 42 inches (1066 mm).
i.
Product: Item GXS-480-HCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GXT-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GXT-160320-HCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GXT-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GXT-200400-HCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GXT-240360-HCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GXT-240480-HCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GXT-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GXT-360360-HCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GXT-360480-HCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GXT-360540-HCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GXV-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GXV-200200-HCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GXV-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GXV-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GXV-160320-HCR, 15 inches x 32 inches (381 mm x 812 mm).
E.
Grab Bars: GY (Q) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Peened with satin ends. Materials: Type 304 stainless steel. Diameter: 1-1/4 inches (32 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings.
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GYS-120-QCR, 12 inches (304 mm).
b.
Product: Item GYS-160-QCR, 16 inches (406 mm).
c.
Product: Item GYS-180-QCR, 18 inches (457 mm).
d.
Product: Item GYS-240-QCR, 24 inches (609 mm).
e.
Product: Item GYS-300-QCR, 30 inches (762 mm).
f.
Product: Item GYS-320-QCR, 32 inches (812 mm).
g.
Product: Item GYS-360-QCR, 36 inches (914 mm).
h.
Product: Item GYS-420-QCR, 42 inches (1066 mm).
i.
Product: Item GYS-480-QCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GYT-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GYT-160320-QCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GYT-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GYT-200400-QCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GYT-240360-QCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GYT-240480-QCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GYT-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GYT-360360-QCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GYT-360480-QCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GYT-360540-QCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GYV-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GYV-200200-QCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GYV-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GYV-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GYV-160320-QCR, 15 inches x 32 inches (381 mm x 812 mm).
F.
Grab Bars: GY (H) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Peened with satin ends. Materials: Type 304 stainless steel. Diameter: 1-1/2 inches (39 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GYS-120-HCR, 12 inches (304 mm).
b.
Product: Item GYS-160-HCR, 16 inches (406 mm).
c.
Product: Item GYS-180-HCR, 18 inches (457 mm).
d.
Product: Item GYS-240-HCR, 24 inches (609 mm).
e.
Product: Item GYS-300-HCR, 30 inches (762 mm).
f.
Product: Item GYS-320-HCR, 32 inches (812 mm).
g.
Product: Item GYS-360-HCR, 36 inches (914 mm).
h.
Product: Item GYS-420-HCR, 42 inches (1066 mm).
i.
Product: Item GYS-480-HCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GYT-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GYT-160320-HCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GYT-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GYT-200400-HCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GYT-240360-HCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GYT-240480-HCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GYT-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GYT-360360-HCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GYT-360480-HCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GYT-360540-HCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GYV-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GYV-200200-HCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GYV-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GYV-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GYV-160320-HCR, 15 inches x 32 inches (381 mm x 812 mm).
G.
Grab Bars: GZ (Q) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Peened with polished ends. Materials: Type 304 stainless steel.
2.
Diameter: 1-1/4 inches (32 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
3.
Series: Grab bars as scheduled and indicated on Drawings.
4.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GZS-120-QCR, 12 inches (304 mm).
b.
Product: Item GZS-160-QCR, 16 inches (406 mm).
c.
Product: Item GZS-180-QCR, 18 inches (457 mm).
d.
Product: Item GZS-240-QCR, 24 inches (609 mm).
e.
Product: Item GZS-300-QCR, 30 inches (762 mm).
f.
Product: Item GZS-320-QCR, 32 inches (812 mm).
g.
Product: Item GZS-360-QCR, 36 inches (914 mm).
h.
Product: Item GZS-420-QCR, 42 inches (1066 mm).
i.
Product: Item GZS-480-QCR, 48 inches (1219 mm).
5.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GZT-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GZT-160320-QCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GZT-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GZT-200400-QCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GZT-240360-QCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GZT-240480-QCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GZT-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GZT-360360-QCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GZT-360480-QCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GZT-360540-QCR, 36 inches x 54 inches (914 mm x 1372 mm).
6.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GZV-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GZV-200200-QCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GZV-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GZV-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GZV-160320-QCR, 15 inches x 32 inches (381 mm x 812 mm).
H.
Grab Bars: GZ (H) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Peened with polished ends. Materials: Type 304 stainless steel. Diameter: 1-1/2 inches (39 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GZS-120-HCR, 12 inches (304 mm).
b.
Product: Item GZS-160-HCR, 16 inches (406 mm).
c.
Product: Item GZS-180-HCR, 18 inches (457 mm).
d.
Product: Item GZS-240-HCR, 24 inches (609 mm).
e.
Product: Item GZS-300-HCR, 30 inches (762 mm).
f.
Product: Item GZS-320-HCR, 32 inches (812 mm).
g.
Product: Item GZS-360-HCR, 36 inches (914 mm).
h.
Product: Item GZS-420-HCR, 42 inches (1066 mm).
i.
Product: Item GZS-480-HCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GZT-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GZT-160320-HCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GZT-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GZT-200400-HCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GZT-240360-HCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GZT-240480-HCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GZT-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GZT-360360-HCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GZT-360480-HCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GZT-360540-HCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GZV-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GZV-200200-HCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GZV-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GZV-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GZV-160320-HCR, 15 inches x 32 inches (381 mm x 812 mm).
I.
Grab Bars: GB (Q) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Polished. Materials: Type 260 brass alloy. Diameter: 1-1/4 inches (32 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings.
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GBS-120-QCR, 12 inches (304 mm).
b.
Product: Item GBS-160-QCR, 16 inches (406 mm).
c.
Product: Item GBS-180-QCR, 18 inches (457 mm).
d.
Product: Item GBS-240-QCR, 24 inches (609 mm).
e.
Product: Item GBS-300-QCR, 30 inches (762 mm).
f.
Product: Item GBS-320-QCR, 32 inches (812 mm).
g.
Product: Item GBS-360-QCR, 36 inches (914 mm).
h.
Product: Item GBS-420-QCR, 42 inches (1066 mm).
i.
Product: Item GBS-480-QCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GBT-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GBT-160320-QCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GBT-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GBT-200400-QCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GBT-240360-QCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GBT-240480-QCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GBT-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GBT-360360-QCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GBT-360480-QCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GBT-360540-QCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GBV-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GBV-200200-QCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GBV-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GBV-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GBV-160320-QCR, 15 inches x 32 inches (381 mm x 812 mm).
J.
Grab Bars: GB (H) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Polished. Materials: Type 260 brass alloy. Diameter: 1-1/2 inches (39 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
2.
Series: Grab bars as scheduled and indicated on Drawings
3.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GBS-120-HCR, 12 inches (304 mm).
b.
Product: Item GBS-160-HCR, 16 inches (406 mm).
c.
Product: Item GBS-180-HCR, 18 inches (457 mm).
d.
Product: Item GBS-240-HCR, 24 inches (609 mm).
e.
Product: Item GBS-300-HCR, 30 inches (762 mm).
f.
Product: Item GBS-320-HCR, 32 inches (812 mm).
g.
Product: Item GBS-360-HCR, 36 inches (914 mm).
h.
Product: Item GBS-420-HCR, 42 inches (1066 mm).
i.
Product: Item GBS-480-HCR, 48 inches (1219 mm).
4.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GBT-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GBT-160320-HCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GBT-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GBT-200400-HCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GBT-240360-HCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GBT-240480-HCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GBT-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GBT-360360-HCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GBT-360480-HCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GBT-360540-HCR, 36 inches x 54 inches (914 mm x 1372 mm).
5.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GBV-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GBV-200200-HCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GBV-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GBV-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GBV-160320-HCR, 15 inches x 32 inches (381 mm x 812 mm).
K.
Grab Bars: GP (Q) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Powder coated.
 
** NOTE TO SPECIFIER ** Fill in blank below with color designation or delete line as applicable. Consult manufacturer for details about color availability. Delete options color not required.
 
2.
Color: ____________.
3.
Color: As scheduled and indicated on Drawings.
4.
Materials: Type 304 stainless steel. Diameter: 1-1/4 inches (32 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
5.
Series: Grab bars as scheduled and indicated on Drawings.
6.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GPS-120-QCR, 12 inches (304 mm).
b.
Product: Item GPS-160-QCR, 16 inches (406 mm).
c.
Product: Item GPS-180-QCR, 18 inches (457 mm).
d.
Product: Item GPS-240-QCR, 24 inches (609 mm).
e.
Product: Item GPS-300-QCR, 30 inches (762 mm).
f.
Product: Item GPS-320-QCR, 32 inches (812 mm).
g.
Product: Item GPS-360-QCR, 36 inches (914 mm).
h.
Product: Item GPS-420-QCR, 42 inches (1066 mm).
i.
Product: Item GPS-480-QCR, 48 inches (1219 mm).
7.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GPT-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GPT-160320-QCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GPT-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GPT-200400-QCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GPT-240360-QCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GPT-240480-QCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GPT-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GPT-360360-QCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GPT-360480-QCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GPT-360540-QCR, 36 inches x 54 inches (914 mm x 1372 mm).
8.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GPV-160160-QCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GPV-200200-QCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GPV-240240-QCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GPV-300300-QCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GPV-160320-QCR, 15 inches x 32 inches (381 mm x 812 mm).
L.
Grab Bars: GP (H) Grab Bars as manufactured by Access-Able Designs, Inc.
1.
Finish: Powder coated.
 
** NOTE TO SPECIFIER ** Fill in blank below with color designation or delete line as applicable. Consult manufacturer for details about color availability. Delete options color not required.
 
2.
Color: ____________.
3.
Color: As scheduled and indicated on Drawings.
4.
Materials: Type 304 stainless steel. Diameter: 1-1/2 inches (39 mm). Bar Wall Thickness: .049 inches (18 gauge) (1.25 mm).
 
** NOTE TO SPECIFIER ** Delete series options not required.
 
5.
Series: Grab bars as scheduled and indicated on Drawings
6.
Series: S; straight bars.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GPS-120-HCR, 12 inches (304 mm).
b.
Product: Item GPS-160-HCR, 16 inches (406 mm).
c.
Product: Item GPS-180-HCR, 18 inches (457 mm).
d.
Product: Item GPS-240-HCR, 24 inches (609 mm).
e.
Product: Item GPS-300-HCR, 30 inches (762 mm).
f.
Product: Item GPS-320-HCR, 32 inches (812 mm).
g.
Product: Item GPS-360-HCR, 36 inches (914 mm).
h.
Product: Item GPS-420-HCR, 42 inches (1066 mm).
i.
Product: Item GPS-480-HCR, 48 inches (1219 mm).
7.
Series: T; tub and shower bars, reversible.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
a.
Product: Item GPT-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
b.
Product: Item GPT-160320-HCR, 16 inches x 32 inches (406 mm x 812 mm).
c.
Product: Item GPT-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
d.
Product: Item GPT-200400-HCR, 20 inches x 40 inches (508 mm x 1016 mm).
e.
Product: Item GPT-240360-HCR, 24 inches x 36 inches (609 mm x 914 mm).
f.
Product: Item GPT-240480-HCR, 24 inches x 48 inches (609 mm x 1219 mm).
g.
Product: Item GPT-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GPT-360360-HCR, 36 inches x 36 inches (914 mm x 914 mm).
i.
Product: Item GPT-360480-HCR, 36 inches x 48 inches (914 mm x 1219 mm).
j.
Product: Item GPT-360540-HCR, 36 inches x 54 inches (914 mm x 1372 mm).
8.
Series: V; vertical angle.
 
** NOTE TO SPECIFIER ** Delete configuration options not required.
 
a.
Configuration: As indicated on Drawings.
b.
Configuration: Right hand.
c.
Configuration: Left hand.
 
** NOTE TO SPECIFIER ** Delete products not required.
 
d.
Product: Item GPV-160160-HCR, 16 inches x 16 inches (406 mm x 406 mm).
e.
Product: Item GPV-200200-HCR, 20 inches x 20 inches (508 mm x 508 mm).
f.
Product: Item GPV-240240-HCR, 24 inches x 24 inches (609 mm x 609 mm).
g.
Product: Item GPV-300300-HCR, 30 inches x 30 inches (762 mm x 762 mm).
h.
Product: Item GPV-160320-HCR, 15 inches x 32 inches (381 mm x 812 mm).
 
** NOTE TO SPECIFIER ** Delete article not required.
 
2.5
POOL LIFTS
 
** NOTE TO SPECIFIER ** Designed to be self-operated by the individual user. With an easy to use 4 button handset, the user is able to control all movement and enjoy a fully independent aquatic experience. Delete pool lifts not required.
 
A.
Pool Lifts: The Revolution Pool Lift as manufactured by Access-Able Designs, Inc.
 
** NOTE TO SPECIFIER ** Delete product type options not required.
 
1.
Product Type: Revolution Pool Lift, Standard.
a.
Compliance: ADA compliant when installed as recommended by manufacturer. Anchor Setback: 36 in (914 mm) maximum. Anchor Setback: 21 in (533 mm) minimum ADA. Water Draft: 10 in (254 mm) maximum. Vertical Travel Distance: 46 in (1168 mm). Powered Rotation: 360 degrees in either direction. Battery: Rechargeable battery with wall mount charger.
b.
Attachments:
c.
1.)Standard Seat: Lift Capacity: 500 lbs (227 kg). Adjustable Seat Height: 16 in (406 mm) adjustable in 4 in (102 mm) increments. Adjustable footrest and lap belt.
d.
2.)Gurney: Lift Capacity: 350 lbs (159 kg). Material: 314 stainless steel, powder coated for extra corrosion resistance. Alignment Blocks: HDPE-plastic. Quick attach safety pins.
e.
3.)Spine Board: Lift Capacity: 350 lbs (159 kg). Attachment Material: 314 stainless steel, powder coated for extra corrosion resistance. Gurney Material: Rotationally molded LLDPE.
f.
4.)Wheelchair: Lift Capacity: 350 lbs (159 kg). Anchor Setback: 28 in (711 mm) maximum. Material: 314 stainless steel, powder coated for extra corrosion resistance. Sliding forks to accommodate any size wheelchair. Safety Straps: Two.
 
** NOTE TO SPECIFIER ** Delete options and accessories not required.
 
g.
Options and Accessories:
h.
1.)Anchor kit, standard 2 in (51 mm) ID x 8 in (203 mm) deep.
i.
2.)Anchor kit, for semi-recessed, shallow concrete.
j.
3.)Cover, standard lockable, blue.
k.
4.)Cover, for use with solar charger.
l.
5.)Solar charging station.
m.
6.)Transport cart.
2.
Product Type: Revolution, Deep Draft Pool Lift.
a.
Compliance: ADA compliant when installed as recommended by manufacturer. Anchor Setback: 42 in (1067 mm) maximum. Anchor Setback: 21 in (533 mm) minimum ADA. Water Draft: 14 in (356 mm) maximum. Vertical Travel Distance: 49 in (1245 mm). Clearances vary by wall height and width. Powered Rotation: 360 degrees in either direction. Battery: Rechargeable battery with wall mount charger.
b.
Attachment Options:
c.
1.)Standard Seat: Lift Capacity: 400 lbs (181 kg). Adjustable Seat Height: 16 in (406 mm) adjustable in 4 in (102 mm) increments. Adjustable footrest and lap belt.
d.
2.)Gurney: Lift Capacity: 300 lbs (136 kg). Material: 314 stainless steel, powder coated for extra corrosion resistance. Alignment Blocks: HDPE-plastic. Quick attach safety pins.
e.
3.)Spine Board: Lift Capacity: 300 lbs (136 kg). Attachment Material: 314 stainless steel, powder coated for extra corrosion resistance. Gurney Material: Rotationally molded LLDPE.
f.
4.)Wheelchair: Allows for pool access with any stainless steel wheel chair without the need to transfer. Lift Capacity: 300 lbs (136 kg). Anchor Setback: 28 in (711 mm) maximum. Material: 314 stainless steel, powder coated for extra corrosion resistance. Sliding forks to accommodate any size wheelchair. Safety Straps: Two.
g.
Options and Accessories:
 
** NOTE TO SPECIFIER ** Delete options and accessories not required.
 
h.
1.)Anchor kit, standard 2 in (51 mm) ID x 8 in (203 mm) deep.
i.
2.)Anchor kit, for semi-recessed, shallow concrete.
j.
3.)Cover, standard lockable, blue.
k.
4.)Cover, for use with solar charger.
l.
5.)Solar charging station.
m.
6.)Transport cart.
B.
Pool Lifts: The Rational Series R-450R Pool Lift as manufactured by Access-Able Designs, Inc.
1.
Lift Capacity: 450 lbs (204 kg). Battery powered 24 Vdc system. Controls: User-friendly. Arm rests. Foot rests. Safety seat belt. Compatible with pools and spas. UV resistant. Battery charging station. Rotation: 90 degrees right and left. Extends 35 in (889 mm) over pool gutter. Curb Height Clearance: From deck height, 18 in (457 mm) high (Provide deck form for verification).
 
** NOTE TO SPECIFIER ** Optional delete if not required.
 
2.
Sleeve anchor system.
C.
Pool Lifts: The Home Series H-300 Pool Lift as manufactured by Access-Able Designs, Inc.
1.
Lift Capacity: 300 lbs (136 kg). ADA compliant. Construction: Stainless steel with powder coat finish. Battery powered 24 Vdc system. Controls: User-friendly. Arm rests. Foot rests. Safety seat belt. Compatible with most standard pool applications. UV resistant. Right seat application. Battery charging station.
 
** NOTE TO SPECIFIER ** Optional. Delete if not required.
 
2.
Drop in or Four Point Anchoring System.
D.
Pool Lifts: The Global Lift Rotational Pool Lift R-375 as manufactured by Access-Able Designs, Inc.
1.
Lifting Capacity: 375 lbs (170 kg). ADA compliant. Battery powered 24 Vdc system. Arm rests. Foot rests. Compatible with pools and spas. Battery charging station. Rotation: 360 degrees right and left. Extends 36 in (914 mm) from anchor and will allow for a 10 in (254 mm) drop to the water. Key Lockout System: Designed to lock the system out with the turn of a key when the unit is not in or intended to be in use. Curb Height Clearance: Clears obstacles up to 10 in (254 mm) tall.
2.
Construction: Stainless steel with a powder coat UV resistant finish. Anti-Pinch Linkage System: Holds seat in level position with an external linkage system that eliminates pinch points. Key Lock-Out System: Lock the system out with turn of a key when unit is not in or intended to be in use. Emergency Return System: Connects the power source directly to actuator if handset or controls malfunction. Safely returns the stranded user to the up position out of the water.
E.
Pool Lifts: The Global Lift Performance Pool Lift P-375 as manufactured by Access-Able Designs, Inc.
1.
Lifting Capacity: 375 lbs (170 kg). ADA compliant. Arm rests. Foot rests. Compatible with pools and spas. Battery charging station. Anti-Pinch Linkage System: Holds seat in level position with an external linkage system that eliminates pinch points. Key Lock-Out System: Lock the system out with turn of a key when unit is not in or intended to be in use. Emergency Return System: Connects the power source directly to actuator if handset or controls malfunction. Safely returns the stranded user to the up position out of the water.
F.
Pool Lifts: The Global Lift Legend Pool Lift with Drop in Anchor as manufactured by Access-Able Designs, Inc.
1.
Lifting Capacity: 325 lbs (147 kg). ADA compliant. Battery powered 24 Vdc system. Arm rests. Foot rests. Safety seat belt. Battery charging station. Construction: Stainless steel with a powder coat UV resistant finish. Controls: User-friendly. Fits most standard pool applications. UV resistant. Right seat application. Battery charging station. Drop in anchoring system.
G.
Pool Lifts: The Global Lift Portable Pool Lift C-375 as manufactured by Access-Able Designs, Inc.
1.
Lifting Capacity: 375 lbs (170 kg). ADA compliant. Battery powered 24 Vdc system. Arm rests. Foot rests. Battery charging station. Anti-Pinch Linkage System: Holds seat in level position with an external linkage system that eliminates pinch points. Key Lock-Out System: Lock the system out with turn of a key when unit is not in or intended to be in use. Emergency Return System: Connects the power source directly to actuator if handset or controls malfunction. Safely returns the stranded user to the up position out of the water.
H.
Pool Lifts: The Global Lift Superior Pool Lift S-350 as manufactured by Access-Able Designs, Inc.
1.
Lifting Capacity: 375 lbs (170 kg). ADA compliant. Battery powered 24 Vdc system. Arm rests. Foot rests. Compatible with pools and spas. Battery charging station. Anti-Pinch Linkage System: Holds seat in level position with an external linkage system that eliminates pinch points. Key Lock-Out System: Lock the system out with turn of a key when unit is not in or intended to be in use. Emergency Return System: Connects the power source directly to actuator if handset or controls malfunction. Safely returns the stranded user to the up position out of the water.
I.
Pool Lifts: The Global Portable Pool Lift C-450-C450TPAPK as manufactured by Access-Able Designs, Inc.
1.
Lift Capacity: 450 lbs (204 kg). ADA compliant. Battery powered 24 Vdc system. Arm rests. Foot rests. Fits most standard pool applications. Provide deck form for verification. Safety seat belt. Right seat position. Compatible with pools and spas. Battery charging station. Controls: User-friendly. Portable capability system. UV Resistant. Construction: Stainless steel with a powder coat UV resistant finish. Anti-Pinch Linkage System: Holds seat in level position with an external linkage system that eliminates pinch points. Key Lock-Out System: Lock the system out with turn of a key when unit is not in or intended to be in use. Emergency Return System: Connects the power source directly to actuator if handset or controls malfunction. Safely returns the stranded user to the up position out of the water.
J.
Pool Lifts: The Ambassador Pool Lift as manufactured by Access-Able Designs, Inc.
1.
Designed for clearing wide gutters and spa benches. Ideal for raised perimeter pools and spas.
2.
Lift Capacity: 350 lbs (159 kg). ADA compliant. Battery powered 24 Vdc system. Setback Range: 18 to 38 in (460 to 960 mm). This extended reach pool lift comes as a standard deep draft and is also available in a reverse configuration. Clearances vary by wall height and width. Are Rest: Flip-up. Leg Rest: Pull out. Construction: Stainless steel with a powder coat UV resistant finish. Adjustable lap belt. Controls: Water resistant handset. Battery charging station with wall mount charger.
 
** NOTE TO SPECIFIER ** The Pro Pool Lift is arguably the most technically advanced pool access lift available on the market today. If you are looking to keep your deck clear and anchor free, then incorporating our Portable Kit will allow you to place the Pro Pool Lift almost anywhere on the deck! Delete if not required.
 
K.
Pool Lifts: The PRO Pool Lift as manufactured by Access-Able Designs, Inc.
 
** NOTE TO SPECIFIER ** Delete options for product types not required.
 
1.
Product Type: Pro Pool Lift Battery Powered with Anchor as manufactured by Access-Able Designs, Inc.
2.
Product Type: Pro Pool Lift Battery Powered, with Portable Kit as manufactured by Access-Able Designs, Inc.
3.
Product Type: Pro Pool Lift Portable Kit (For Retrofit) as manufactured by Access-Able Designs, Inc.
4.
Compliance: ADA compliant when installed as recommended by manufacturer. Lifting: Capacity: 400 lb (136 kg). Description: Linear actuated, self operable, in-ground pool or spa lift. Design: Does not intrude into the pool or spa unless in use. Assembly: Fully factory assembled, delivered ready for installation. Base Plates: 1/4 inches (6 mm) stainless steel Type 304. Hardware: Stainless steel. Set Back Range: 22.5 inches (571 mm) from centerline of seat to pool edge. Seats: 18 inches (457 mm) wide; seatbelt included. Actuators: 24 inch (610 mm) stroke Linak LA34 linear actuators. Chairs and Footrests: Rotationally molded UV stabilized polyetheylene (lldpe). Battery: Rechargeable, 24 volt battery; charger included. Remote Control Handset: 2 button, 24 volt waterproof controller remote. Lap Belts: Adjustable. Main Housing: 2 inches (52 mm) x 4 inches (102 mm) x .120 inches (13 mm) stainless steel tube, Type 304. Housing Finish: White, UV resistant powder coating.
 
** NOTE TO SPECIFIER ** Delete optional headrest if not required.
 
5.
Headrests: Provide optional headrests.
 
** NOTE TO SPECIFIER ** Delete wheel kits if not required.
 
6.
Wheel Kits: Molded polyolefin.
 
** NOTE TO SPECIFIER ** The Ranger is ideal for use on smaller hotel and motel pools, also a great economical choice for backyard enthusiasts who enjoy their independence. Delete if not required.
 
L.
Pool Lifts: The Ranger Pool Lift as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when installed as recommended by manufacturer. Lifting Capacity: 300 lb (136 kg). Description: Linear actuated, self operable, in-ground pool or spa lift. Design: Does not intrude into the pool or spa unless in use. Actuators: 24 inches (610 mm) stroke Linak LA34 linear actuators. Battery: Rechargeable, 24 volt battery; charger included. Remote Control Handset: 2 button, 24 volt waterproof controller remote. Set Back Range: 4 inches to 14 inches (101 mm to 355 mm); 16 inches (405 mm) from centerline of seat to pool edge. Seats: 18 inches (457 mm) wide; seatbelt included. Base Plates: 1/4 inches (6 mm) stainless steel, Type 304. Hardware: Stainless steel. Chairs and Footrests: UV stabilized polyetheylene (lldpe). Main Housing: 2 inches (52 mm) x 4 inches (102 mm) x .120 inches (13 mm) stainless steel tube, Type 304. Housing Finish: White, UV resistant epoxy powder coating.
 
** NOTE TO SPECIFIER ** Delete optional features/accessories not required.
 
2.
Optional Features/Accessories: As scheduled and indicated on Drawings.
3.
Optional Features/Accessories: Provide optional features/accessories listed below.
 
** NOTE TO SPECIFIER ** Delete options from list below not required.
 
a.
Concrete anchor systems.
b.
Anchor for concrete anchor systems.
c.
Wheel Kits: Molded polyolefin.
d.
Part Number: F-004PLBAP - Ranger Upgrade Kits.
e.
Part Number: F-433PP4A - Preset Anchors.
f.
Part Number: F-046QAB - Quick Set Anchor Kits.
g.
Part Number: F-422PLH - Headrests.
h.
Part Number: F-442PPC - Safety Covers.
i.
Part Number: F-40220 - Wood Deck Anchors.
j.
Part Number: F-004AB - 24V Additional Batteries.
k.
Part Number: F-044CH - 24V Battery Chargers.
l.
Part Number: F-423CS - Chest Straps.
m.
Part Number: F-100JH - Remotes.
 
** NOTE TO SPECIFIER ** The Titan 600 Lift shares a lot of the same great features as The Revolution Lift but is designed to lift patrons up to 600 lb (272 kg). Now independently verified by Wyle Labs to meet ADA standards. No other ADA compliant pool lift on the market has this weight capacity. Delete options from list below not required.
 
M.
Pool Lifts: The Titan 600 Lift as manufactured by Access-Able Designs, Inc.
1.
Compliance: Independently verified by Wyle Labs to meet ADA standards when installed as recommended by manufacturer. Lifting Capacity: 600 lb (272 kg). Construction: Stainless steel. Operation: 360 powered rotation in either direction, ability to clear a 30 inch (762 mm) high wall. Battery: Rechargeable, 24 Volts; includes charger. Set Back Range: 12 inches to 44 inches (304 mm to 1117 mm). Finish: White epoxy powder coating. Arms: Dual flip-up arms. Lap Belts: Adjustable. Foot Rests: Removable, adjustable.
 
** NOTE TO SPECIFIER ** Delete optional features/accessories not required.
 
2.
Optional Features/Accessories: As scheduled and indicated on Drawings.
3.
Optional Features/Accessories: Provide optional features/accessories listed below.
 
** NOTE TO SPECIFIER ** Delete options from list below not required.
 
a.
Part Number: F-612TLA - Anchor Systems, Titan 600 Lift.
b.
Part Number: F-720RLC - Covers, Titan 600 Lift.
c.
Part Number: F-423CS - Chest Straps.
d.
Part Number: F-722HRR - Headrests.
e.
Part Number: F-614TTC - Transport Carts.
f.
Part Number: F-019CA - Cycle Attachments.
g.
Part Number: F-600TLAP - Titan 600 Lift Upgrade Packages.
 
** NOTE TO SPECIFIER ** If your facility needs to become ADA compliant and you already have an existing 6 inch deep anchor, then The Scout is your solution. The Scout eliminates the need for anchor installation by utilizing almost any existing 1.9 inches I.D. x 6 inches (48 mm I.D. x 152 mm) deep anchor. Also available are adapter sleeves to accommodate larger and deeper diameter anchors. Delete options from list below not required.
 
N.
Pool Lifts: The Scout Lift as manufactured by Access-Able Designs, Inc.
1.
Compliance: Independently verified to meet ADA guidelines when installed as recommended by manufacturer. Description: Designed to be used in retro-fit applications. Set Back Range: 12 inches to 36 inches (304 mm to 914 mm). Operation: 360 degree powered rotation in either direction, clears walls up to 6 inches (152 mm) high. Footrest and Lap Belt: Adjustable.
 
** NOTE TO SPECIFIER ** Can be adapted to most existing 6 inch deep anchors, utilizing almost any existing 1.9 inch I.D. x 6 inch deep anchor; also available are adapter sleeves to accommodate larger and deeper diameter anchors. Fill in blank below with mounting designation/description or delete line as applicable. No sleeve required for EZ/Power EZ, Econo or Recreonics Anchors. Delete options for mounting not required.
 
2.
Mounting: ________________.
3.
Mounting: As scheduled and indicated on Drawings.
 
** NOTE TO SPECIFIER ** Delete capacity not required.
 
4.
Lifting Capacity: 350 lb (159 kg) weight capacity.
5.
Lifting Capacity: 300 lb (136 kg) when utilizing plastic sleeve.
 
** NOTE TO SPECIFIER ** Delete optional features/accessories not required.
 
6.
Finish: Powdercoated.
7.
Construction: Stainless steel.
8.
Battery: Rechargeable, 24 Volts; includes charger.
9.
Remote Control Handset: 4 button, 24 volt waterproof controller remote.
10.
Lap Belts: Adjustable.
11.
Arms: Dual flip-up arms.
 
** NOTE TO SPECIFIER ** Delete optional features/accessories not required.
 
12.
Optional Features/Accessories: As scheduled and indicated on Drawings.
13.
Optional Features/Accessories: Provide optional features/accessories listed below.
 
** NOTE TO SPECIFIER ** Delete options from list below not required.
 
a.
Part Number: F-802SCNA - Scout lift, no anchors.
b.
Part Number: F-800SCAP - Upgrade Packs (include batteries, headrests, chest straps, covers).
c.
Part Number: F-814SCTC - Transport carts.
d.
Part Number: F-722HRR - Headrests.
e.
Part Number: F-423CS - Chest straps.
f.
Part Number: F-105LAR - Pull out leg rests.
g.
Part Number: F-450SC - Protective covers.
h.
Part Number: F-808SA - Additional standard anchors.
i.
Part Number: F-820 - Anchor sleeves to retro-fit HANDY lift anchors.
j.
Part Number: F-822 - Anchor sleeves to retro-fit Lifeguard lift anchors.
k.
Part Number: F-824 - Anchor sleeves to retro-fit Elkhorn lift anchors.
l.
Part Number: F-826 - Anchor sleeves to retro-fit Hoyer lift anchors.
 
** NOTE TO SPECIFIER ** The Patriot Portable Pro Pool Lift is the only completely portable, Independently certified ADA compliant aquatic lift on the market that has a 450lb (204kg) lifting capacity. This lift requires no anchors and can easily be removed from poolside when not needed. Delete if not required.
 
O.
Pool Lifts: The Patriot Portable Pro Pool Lift as manufactured by Access-Able Designs, Inc.
1.
Compliance: Independently certified to be ADA compliant when installed as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** 400 lb (181 kg) capacity for pools with deck to water level greater than 6 inches. Delete capacity not required.
 
2.
Lifting Capacity: 450 lb (204 kg)
3.
Lifting Capacity: 400 lb (181 kg).
4.
Design: Field convertible to an anchored lift. Frames: 1-1/2 inches (39 mm) x .180 inches (4.6 mm) wall square tubing, Type 304L stainless steel. Finish: White epoxy powder coating. Battery: Rechargeable, 24 Volts; includes charger. Remote Control Handset: 4 button, 24 volt waterproof controller remote. Lap Belts: Adjustable. Footrests: Flip-up, adjustable and removable. Arm Rests: Dual flip up. Actuator: Battery operated linear actuator. Set Back Range: 0 - 10 inches (0 - 254 mm) maximum. Clearances: 25 inch (635 mm) lowering depth. Counter Weights: 11 per unit, 60 lb (27 kg) each; fiberglass and rebar reinforced concrete weights. Packaging: Capable of being rolled through a standard 36 inches wide doorway. Sliding Mechanism: Allows lifts to be stored on top of frame for transportation without disassembly or tools. Cover, Seat and Footrest: Rotomolded polyethylene. Plastic Components: Except for cover, seat and footrest, UHMW polyethylene. Base Plates: 3/8 inches (9.5 mm) thick plate, Type 304L stainless steel. Covers: Rotomolded MDPE (medium density polyethylene). Casters: 3-1/2 inches (89 mm) rubber wheel, stainless steel frame (2 with brakes).
 
** NOTE TO SPECIFIER ** Delete optional features/accessories not required.
 
5.
Optional Features/Accessories: As scheduled and indicated on Drawings.
6.
Optional Features/Accessories: Provide optional features/accessories listed below.
 
** NOTE TO SPECIFIER ** Delete options from list below not required.
 
a.
Headrests.
b.
Chest straps.
c.
Protective covers.
d.
Pull out leg rests.
 
** NOTE TO SPECIFIER ** Side-to-side transfers are easy, the footrest flips up and the mounting arm is under the seat; this allows for unobstructed transfer. Previously available as a custom design, the Model IGAT-180AD is designed to accommodate pools with automatic covers and some pool/spa combinations. Delete if not required.
 
P.
Pool Lifts: Model IGAT-180 AD In-Ground Above Deck Automatic 180 degree Seat Turn as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when installed as recommended by manufacturer.
 
** NOTE TO SPECIFIER ** Delete options from list below not required.
 
2.
Configuration: As scheduled and indicated on Drawings.
3.
Configuration: Standard units.
4.
Configuration: Opposite facing/opposite turn units.
5.
Rated Lifting Capacity: 350 lb (158 kg). Operation: Automatic seat turn, water pressure powered; user-operable, seat height adjustable to accommodate various wheelchair heights. Seat rotates forward when entering the pool, and backward when exiting the water.
 
** NOTE TO SPECIFIER ** Delete degree of operation not required.
 
6.
Degree of Rotation: As scheduled and indicated on Drawings.
7.
Degree of Rotation: Standard, 180 degrees.
8.
Degree of Rotation: 135 degrees.
9.
Degree of Rotation: 90 degrees.
10.
Design: Elevated deck clearance allows for automatic pool covers or pool/spa combinations.
 
** NOTE TO SPECIFIER ** Delete seat turn direction not required.
 
11.
Seat Turn Direction: As scheduled and indicated on Drawings.
12.
Seat Turn Direction: Standard, clockwise.
13.
Seat Turn Direction: Counter-clockwise.
14.
Mounting: Installs in deck sockets; socket covers included.
15.
Vertical Seat Travel: 42 inches (1066 mm).
 
** NOTE TO SPECIFIER ** Delete options for armrests not required.
 
16.
Armrests: As scheduled and indicated on Drawings.
17.
Armrests: Standard, right arm only.
18.
Armrests: Provide optional flip-up outer arms.
19.
Footrests: Flip-up.
20.
Lockable: Can be padlocked in seat-up position.
 
** NOTE TO SPECIFIER ** Delete if not required.
 
21.
California Seating Packages: Provide optional packages to meet the California Building Code for Pool Lifts.
 
** NOTE TO SPECIFIER ** Note that the pressure requirement for a faucet or hose connection is approximately 10 percent higher to achieve our rated load. Delete options from list below not required.
 
Q.
Pool Lifts: Model IGAT-90 as manufactured by Access-Able Designs, Inc.
 
** NOTE TO SPECIFIER ** Opposite facing/opposite turn units available; custom charges may apply. Delete options for seat configuration not required.
 
1.
Seat Configuration: As scheduled and indicated on Drawings.
2.
Seat Configuration: Standard units.
3.
Seat Configuration: Opposite facing/opposite turn units.
4.
Operation: Independent, automatic, 90 degree seat turn; water pressure powered. Lockable: Can be padlocked in seat-up position. Rated Lifting Capacity (at 55 psi): 400 lb (181 kg). Description: Portable; lift out and roll away. Vertical Seat Travel: 42 inches (1066 mm). Mounting: Installs in deck socket.
 
** NOTE TO SPECIFIER ** Delete article if not required.
 
2.6
SPA LIFTS
 
** NOTE TO SPECIFIER ** The Spa Lift Ultra is the solution to stress-free access to your personal backyard or commercial spa. Access your personal backyard or commercial spa environment while enjoying the benefits of relaxation along with increased independence. Delete if not required.
 
A.
Spa Lifts: The Spa Lift Ultra Model F-005SLU as manufactured by Access-Able Designs, Inc.
1.
Lift providing access to residential and commercial elevated pools and spas. ADA compliant. Capacity: 400 lbs (181 kg).
2.
Clearance Range: Clearances vary by wall height and width.
a.
Wall Height: 21 to 51 in (533 to 1295 mm).
b.
Wall Thickness at 21 in (533 mm) height: 12 in (305 mm).
c.
Wall Thickness at 51 in (1295 mm) height: 14 in (356 mm).
d.
Width Clearance: 17 in (432 mm) maximum.
e.
Vertical Travel Distance: 41-1/8 in (1045 mm).
3.
Powered Rotation: 360 degrees. Leg Rests: Adjustable pull-out. Arm Rests: Flip-up. Battery Powered: Rechargeable with wall mount charger. Controls: Water resistant handset. Pushbutton operation. Construction: Stainless steel. Product Weight: 180lbs (81 kg). Finish: Powder coat.
 
** NOTE TO SPECIFIER ** Delete anchor option not require.
 
4.
Anchors: Concrete Deck No. F-SPAAK8. Anchor setback: 10 in (254 mm).
5.
Anchors: Wood Deck No. F-107UEWDA. Anchor setback: 10 in (254 mm).
 
** NOTE TO SPECIFIER ** The Spa Lift Elite is the solution to stress-free access to your personal backyard or commercial spa. Ideal for swim spas, you can now enjoy increased independence and improved health through the benefits of aquatic exercise. Delete if not required.
 
B.
Spa Lifts: The Spa Lift Elite Model F-006SLE as manufactured by Access-Able Designs, Inc.
1.
Fully powered lift providing access to elevated pools and spas. ADA compliant.
2.
Capacity: 300 lbs (136 kg).
3.
Clearance Range: Clearances vary by wall height and width.
a.
Wall Height: 21 to 68 in (533 to 1727 mm).
b.
Wall Thickness at 21 in (533 mm): 18 in (457 mm).
c.
Wall Thickness at 51 in (1295 mm): 15 in (381 mm).
d.
Width Clearance: 26 in (660 mm) maximum.
e.
Vertical Travel Distance: 58-7/8 in (1495 mm).
4.
Powered Rotation: 360 degrees. Leg Rests: Adjustable pull-out. Arm Rests: Flip-up. Battery Powered: Rechargeable with wall mount charger. Controls: Water resistant handset. Pushbutton operation. Construction: Stainless steel. Product Weight: 185 lbs (84 kg). Finish: Powder coat.
 
** NOTE TO SPECIFIER ** Delete anchor option not require.
 
5.
Anchors: Concrete Deck No. F-SPAAK8. Anchor setback: 10 in (254 mm).
6.
Anchors: Wood Deck No. F-107UEWDA. Anchor setback: 10 in (254 mm).
 
** NOTE TO SPECIFIER ** A great access addition to above-ground spas and hot tubs. Other applications for this unit include freestanding nursing home tubs. Delete if not required.
 
C.
Spa Lifts: Model AG60 Above-Ground as manufactured by Access-Able Designs, Inc.
1.
Rated Lifting Capacity (at 55-65 psi): 300 lb (kg). Construction: Cylinder welded to a 16 inch x 16 inch (406 mm x 406 mm) stainless-steel plate with tripod supports. Design: Control valve mounted on cylinder, adjustable in height Can accommodate variable wall heights. Operation: Assisted; manual 360 degree seat turn, water pressure powered.
 
** NOTE TO SPECIFIER ** Delete options for seat configuration not required.
 
2.
Seat Configuration: As scheduled and indicated on Drawings.
3.
Seat Configuration: Facing right.
4.
Seat Configuration: Facing left.
5.
Seat Configuration: Facing straight out.
 
** NOTE TO SPECIFIER ** Delete options for base plates not required.
 
6.
Base Plates: As scheduled and indicated on Drawings.
7.
Base Plates: Standard, bolted to floor.
8.
Base Plates: Lift is attached to top edge of spa.
9.
Arms: Rigid, two per unit.
 
** NOTE TO SPECIFIER ** Several styles of manual-turn handles allow some people to be able to use this lift unassisted by manually rotating themselves while on the seat. Delete if not required.
 
10.
Handles: ____________.
11.
Handles: As scheduled and indicated on Drawings..
12.
Handles: Standard.
13.
Vertical Seat Travel: 31 inches (787 mm).
 
** NOTE TO SPECIFIER ** Specifically designed to lift people into and out of above-ground high wall therapy pools walls. Delete if not required.
 
D.
Spa Lifts: Model AG72 Above-Ground Lifts with 60 inch (1524 mm) clearance as manufactured by Access-Able Designs, Inc.
1.
Compliance: ADA compliant when installed as recommended by manufacturer. Operation: Assisted, manual 360 degree seat turn; after raising seat, assistant turns seat while helping lift patient's legs, then turns valve handle to lower seat inside pool. Water pressure powered. Rated Lifts Capacity (at 55 psi): 300 lb (kg). Mounting: Installs on deck and top pool flange. Vertical Seat Travel: 61 inches (1549 mm). Base Plate: Stainless steel, bolted to floor. Bracket: Stainless-steel, around top of cylinder, bolted through the top pool flange. Mounting Hardware: Provide manufacturer's standard mounting hardware. Seats: Two arms and a seat belt is included with each lift.
PART 3 EXECUTION
 
3.1
EXAMINATION AND PREPARATION
A.
Prepare substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions. Do not proceed with installation until substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected.
3.2
INSTALLATION
A.
Install in accordance with manufacturer's instructions, approved submittals and in proper relationship to adjacent construction.
3.3
PROTECTION
A.
Protect installed products until completion of project. Touch-up, repair or replace damaged products before substantial completion.
END OF SECTION