MasterFormat: 2014
Download this On-Premise Laundry Equipment Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
Dexter Laundry On-Premise Laundry Equipment
 
         
SECTION 11 23 00
 
         
ON-PREMISE LAUNDRY EQUIPMENT
 
         
 
         
Copyright 2019 - 2019 ARCAT, Inc. - All rights reserved

          ** NOTE TO SPECIFIER ** Dexter Laundry; on-premise laundry equipment.
This section is based on the products of Dexter Laundry, which is located at:
2211 W. Grimes
Fairfield, IA 52556
Toll Free Tel: 800-524-2954
Tel: 641-472-5131
Email: request info
Web: http://www.dexter.com
[ Click Here ] for additional information.
For over 125 years, Dexter Laundry has been helping people and customers around the world process laundry faster and more efficiently. Headquartered in Fairfield, Iowa, we design, build and assemble all of our products in our manufacturing facility here in the United States. As an employee-owned company, we are committed to helping our customers achieve long-term success by providing them with laundry solutions they can depend on
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
 
          A.On-Premise Laundry Equipment of the Following Types:
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
          1.On-premise washers. (O-series)
          2.On-premise dryers. (O-series)
          3.On-premise washers. (6-Cycle)
          4.On-premise dryers. (6-Cycle)
          5.On-premise stack washer-dryers. (6-Cycle)
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
 
          A.Section 22 05 00 - Common Work Results for Plumbing.
 
          B.Section 26 00 00 - Electrical.
 
          1.3SUBMITTALS
 
          A.Submit under provisions of Section 01 30 00 - Administrative Requirements.
 
          B.Product Data:
          1.Manufacturer's data sheets on each product to be used.
          2.Preparation instructions and recommendations.
          3.Storage and handling requirements and recommendations.
          4.Typical installation methods.
 
          C.Verification Samples: For each finish specified, two 6 inches (150 mm) square samples.
 
          D.Shop Drawings: Include details of materials, construction and finish. Include relationship with adjacent construction.
 
          1.4QUALITY ASSURANCE
 
          A.Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum five years documented experience.
 
          B.Installer Qualifications: Company specializing in performing Work of this section with minimum two years documented experience with projects of similar scope and complexity.
 
          C.Source Limitations: Provide each type of product from a single manufacturing source to ensure uniformity.
          ** NOTE TO SPECIFIER ** Include mock-up if the project size or quality warrant the expense. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          D.Mock-Up: Construct a mock-up with actual materials in sufficient time for Architect's review and to not delay construction progress. Locate mock-up as acceptable to Architect and provide temporary foundations and support.
          1.Intent of mock-up is to demonstrate quality of workmanship and visual appearance.
          2.If mock-up is not acceptable, rebuild mock-up until satisfactory results are achieved.
          3.Retain mock-up during construction as a standard for comparison with completed work.
          4.Do not alter or remove mock-up until work is completed or removal is authorized.
 
          1.5PRE-INSTALLATION CONFERENCE
 
          A.Convene a conference approximately two weeks before scheduled commencement of the Work. Attendees shall include Architect, Contractor and trades involved. Agenda shall include schedule, responsibilities, critical path items and approvals.
 
          1.6DELIVERY, STORAGE, AND HANDLING
 
          A.Store and handle in strict compliance with manufacturer's written instructions and recommendations.
 
          B.Protect from damage due to weather, excessive temperature, and construction operations.
 
          1.7PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.
 
          1.8WARRANTY
 
          A.Manufacturer's Warranty: Provide manufacturer's standard limited warranty.
          ** NOTE TO SPECIFIER ** Delete warranty options not required.
          1.Washers: Lifetime technical support.
          a.Frame, Tub, Cylinder, Shaft, Seals, Bearings, and Bearing Housing: 10 years.
          b.Parts: 3 years.
          2.Dryers: Lifetime technical support.
          a.Trunnion, Bearings, and Bearing Housing: 5 years.
          b.Parts: 3 years.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Dexter Laundry, which is located at: 2211 W. Grimes; Fairfield, IA 52556; Toll Free Tel: 800-524-2954; Tel: 641-472-5131; Email: request info; Web: http://www.dexter.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
          ** NOTE TO SPECIFIER ** Our easy to use O-Series controls give you the precision and features you need to ensure your laundry is done properly. Delete article if not required.
 
          2.2ON-PREMISE O-SERIES WASHERS
 
          A.General:
          1.Cycles: 100 fully customizable cycles.
          2.Wash Stages: 20 stages.
          3.Electric and steam heat options.
          4.Chemical Injection System: Fully programmable 10 point chemical injection system.
          5.Construction:
          a.Bearings: Heavy-duty bearings in cast iron housing.
          b.Spider and Shaft: Welded steel.
          c.Doors: Polished chrome.
          d.Tub and Cylinder: AISI 304 stainless steel.
          e.Top, Front, and Side Panels: AISI 304 stainless steel.
          6.Water Efficiency: Electronic pressure sensor offers a range of water level options.
          7.Control Features:
          a.Delayed start.
          b.Management tools.
          c.Large display.
          d.Streamlined interface.
          e.Multi-lingual capabilities.
          ** NOTE TO SPECIFIER ** Delete basis of design options not required.
 
          B.Basis of Design: T-350 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 20 lbs (9.1 kg).
          2.Cylinder Volume: 2.7 cu ft (76.5 L).
          3.High Extract Speed: Programmable up to 200 g-force (819 rpm) maximum.
          4.Intermediate Extract Speed: Programmable, 60 g-force (449 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (55 rpm) standard.
          6.Motor Size: 1 hp (0.75 kW).
          7.Dimensions (HxWxD): 43-7/8 x 26 x 28 inches (1114 x 660 x 711 mm).
          8.Net Weight: 383 lbs (173.7 kg).
          9.Shipping Dimensions (HxWxD): 49-1/4 x 28-1/4 x 33-1/2 inches (1251 x 718 x 851 mm).
          10.Shipping Weight: 407 lbs (184.6 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 2-1/4 inches (57 mm).
          e.Floor to Center for Drain: 6 inches (152 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208 to 240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208 to 240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          C.Basis of Design: T-450 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Cylinder Volume: 3.8 cu ft (107.6 L).
          3.High Extract Speed: Programmable up to 200 g-force (750 rpm) max.
          4.Intermediate Extract Speed: Programmable, 60 g-force (411 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (50 rpm) standard.
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 48-3/16 x 29-7/8 x 28-1/4 inches (1224 x 759 x 718 mm).
          8.Net Weight: 526 lbs (238.6 kg).
          9.Shipping Dimensions (HxWxD): 53-1/4 x 31-1/2 x 33-1/2 inches (1353 x 800 x 851 mm).
          10.Shipping Weight: 544 lbs (246.8 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 5 inches (127 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          D.Basis of Design: T-750 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 50 lbs (22.7 kg).
          2.Cylinder Volume: 6.5 cu ft (184.1 L).
          3.High Extract Speed: Programmable up to 200 g-force (685 rpm) max.
          4.Intermediate Extract Speed: Programmable, 60 g-force (375 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (43 rpm) standard.
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 53-7/8 x 34-3/8 x 32-7/8 inches (1369 x 873 x 835 mm).
          8.Net Weight: 920 lbs (417.3 kg).
          9.Shipping Dimensions (HxWxD): 60 x 36 x 38 inches (1524 x 914 x 965 mm).
          10.Shipping Weight: 947 lbs (417.3 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 20.
          e.Running Amps: 8.4.
 
          E.Basis of Design: T-650 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 40 lbs (18.1 kg).
          2.Cylinder Volume: 6 cu ft (170 L).
          3.High Extract Speed: Programmable up to 200 g-force (750 rpm) max.
          4.Intermediate Extract Speed: Programmable, 60 g-force (411 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (50 rpm) standard.
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 53 x 29-7/8 x 38-1/8 inches (1346 x 759 x 968 mm).
          8.Net Weight: 744 lbs (337.5 kg).
          9.Shipping Dimensions (HxWxD): 58-3/4 x 31-1/2 x 43-3/4 inches (1492 x 800 x 1111 mm).
          10.Shipping Weight: 766 lbs (347.5 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-7/8 inches (175 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 6.2.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 6.2.
          c.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 8.
          2)Circuit Breaker Amps: 40.
          3)Running Amps: 40.
          d.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 6.2.
          e.Power: 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 0.33 inches (8.4 mm).
          2)Circuit Breaker Amps: 30.
          3)Running Amps: 30.
 
          F.Basis of Design: T-950 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 60 lbs (27.2 kg).
          2.Cylinder Volume: 9 cu ft (254.9 L).
          3.High Extract Speed: Programmable up to 200 g-force (685 rpm) max.
          4.Intermediate Extract Speed: Programmable, 60 g-force (375 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (43 rpm) standard.
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 55-3/8 x 34-3/8 x 38-7/8 inches (1407 x 873 x 987 mm).
          8.Net Weight: 1000 lbs (453.6 kg).
          9.Shipping Dimensions (HxWxD): 61-1/2 x 36 x 45-1/4 inches (1562 x 914 x 1149 mm).
          10.Shipping Weight: 1016 lbs (460.8 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 and 12 gal per min (34 and 45 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 12.
          c.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 6.
          2)Circuit Breaker Amps: 60.
          3)Running Amps: 60.
          d.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 12.
          e.Power: 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 0.33 inches (8.4 mm).
          2)Circuit Breaker Amps: 40.
          3)Running Amps: 40.
 
          G.Basis of Design: T-1450 Express O-Series Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 90 lbs (40.8 kg).
          2.Cylinder Volume: 13.7 cu ft (388 L).
          3.High Extract Speed: Programmable up to 200 g-force (617 rpm) max.
          4.Intermediate Extract Speed: Programmable, 60 g-force (338 rpm) standard.
          5.Washing Speed: Programmable, 0.9 g-force (39 rpm) standard.
          6.Motor Size: 6.7 hp (5 kW).
          7.Dimensions (HxWxD): 62-3/8 x 41-1/2 x 42-1/4 inches (1584 x 1054 x 1073 mm).
          8.Net Weight: 1322 lbs (599.6 kg).
          9.Shipping Dimensions (HxWxD): 69-1/4 x 43-1/8 x 48 inches (1759 x 1095 x 1219 mm).
          10.Shipping Weight: 1364 lbs (618.7 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 and 12 gal per min (34 and 45 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 8-5/16 inches (211 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 10.
          2)Circuit Breaker Amps: 30.
          3)Running Amps: 15.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 10.
          2)Circuit Breaker Amps: 30.
          3)Running Amps: 15.
          c.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 4.
          2)Circuit Breaker Amps: 60.
          3)Running Amps: 60.
          d.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.21 inches (5.3 mm).
          2)Circuit Breaker Amps: 30.
          3)Running Amps: 15.
          ** NOTE TO SPECIFIER ** Our easy to use O-Series controls give you the precision and features you need to ensure your laundry is done properly. Delete article if not required.
 
          2.3ON-PREMISE O-SERIES DRYERS
 
          A.General:
          1.Moisture Detection: Wireless sensing technology reduces dry time.
          ** NOTE TO SPECIFIER ** Fire Response System is optional. Delete if not required.
          2.Fire Response System: Dexter Fire Response System senses unexpected rise in temperature and engages to protect the facility. Level 1 operates without the need for water. Level 2 and 3 operation requires a water hook-up.
          3.Construction:
          a.Bearings: Heavy-duty bearings in cast iron housing.
          b.Cabinet: Fully welded and painted.
          c.Spider: Welded steel.
          ** NOTE TO SPECIFIER ** Delete tumbler option not required.
          d.Tumbler: Stainless steel.
          e.Tumbler: Galvanized steel.
          ** NOTE TO SPECIFIER ** Delete panels option not required.
          f.Panels: Painted white steel.
          g.Panels: Stainless steel.
          4.Efficiency Features:
          a.Perforated tumblers.
          b.Radial airflow.
          c.Efficient air circulation.
          5.Control Features:
          a.Management tools.
          b.Large display.
          c.Streamlined interface.
          d.Multi-lingual capabilities.
          ** NOTE TO SPECIFIER ** Delete basis of design options not required.
 
          B.Basis of Design: T-30 Express O-Series Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Cylinder Volume: 11.3 cu ft (320 L).
          3.Tumbler Speed: 47 rpm.
          4.Motor Size: 0.5 hp (0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          5.Air Flow: 830 cu ft per min (23.5 cu m per min).
          6.Air Flow: 690 cu ft per min (19.5 cu m per min).
          7.Dimensions (HxWxD): 72-1/4 x 31-1/2 x 41-3/4 inches (1835 x 800 x 1060 m).
          8.Net Weight: 454 lbs (205.9 kg).
          9.Shipping Dimensions (HxWxD): 77-1/4 x 32-3/4 x 45-1/2 inches (1962 x 832 x 1156 mm).
          10.Shipping Weight: 499 lbs (226.3 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          11.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 90,000 BTU per hr (26.4 kW).
          e.Gas Usage: 74,000 BTU per hr (21.7 kW).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Select power requirements. Delete options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.1.
          4)Non-reversing.
          b.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 9.6.
          4)Non-reversing.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.1.
          4)Non-reversing.
          ** NOTE TO SPECIFIER ** Water requirements are for models with Fire Response System Level 2 and 3. Delete if not required.
          13.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 40 to 120 psi (276 to 827 kPa).
 
          C.Basis of Design: T-50 Express O-Series Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 50 lbs (22.7 kg).
          2.Cylinder Volume: 15.8 cu ft (447.4 L).
          3.Tumbler Speed: 45 rpm.
          ** NOTE TO SPECIFIER ** Delete motor size options not required.
          4.Motor Size: 1 hp (.75 kW); 60 Hz models.
          5.Motor Size: .75 hp (.56 kW); 50 Hz models.
          6.Motor Size: 2 and 0.5 hp (1.5 and 0.38 kW); reversing models.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          7.Air Flow: 910 cu ft per min (25.8 cu m per min).
          8.Air Flow: 760 cu ft per min (21.5 cu m per min).
          9.Dimensions (HxWxD): 72-1/4 x 34-1/2 x 50 inches (1835 x 876 x 1270 mm).
          10.Net Weight: 560 lbs (254 kg).
          11.Shipping Dimensions (HxWxD): 77-1/4 x 36 x 53-1/2 inches (1962 x 914 x 1359 mm).
          12.Shipping Weight: 620 lbs (281.2 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          13.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 145,000 BTU per hr (42.5 kW).
          e.Gas Usage: 120,000 BTU per hr (35.2 kW).
          14.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208 to 240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.1.
          4)Reversing.
          b.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.1.
          4)Reversing and Non-Reversing
          c.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.1.
          4)Non-reversing.
          d.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 9.6.
          4)Non-reversing.
          ** NOTE TO SPECIFIER ** Water requirements are for models with Fire Response System. Delete if not required.
          15.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 40 to 120 psi (276 to 827 kPa).
 
          D.Basis of Design: T-80 Express O-Series Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 80 lbs (36.3 kg).
          2.Cylinder Volume: 23 cu ft (651.3 L).
          3.Tumbler Speed: 40 rpm.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model, third subparagraph below is for reversing models. Delete motor size options not required.
          4.Motor Size: 1 hp (0.75 kW).
          5.Motor Size: 0.75 hp (0.56 kW).
          6.Motor Size: 0.75 and 1 hp (0.56 and 0.75 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          7.Air Flow: 1200 cu ft per min (34 cu m per min).
          8.Air Flow: 1000 cu ft per min (28.3 cu m per min).
          9.Dimensions (HxWxD): 75-3/4 x 38-1/2 x 51-3/4 inches (1924 x 978 x 1314 mm).
          10.Net Weight: 715 lbs (324.3 kg).
          11.Shipping Dimensions (HxWxD): 80-3/4 x 40-1/4 x 55-1/2 inches (2051 x 1022 x 1410 mm).
          12.Shipping Weight: 770 lbs (349.3 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          13.Gas Requirements:
          a.Gas Supply Connection: 3/4 inch (19.1 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 215,000 BTU per hr (63 kW).
          e.Gas Usage: 195,000 BTU per hr (57.1 kW).
          14.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 10.4.
          4)Reversing.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.5.
          4)Reversing.
          c.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.5.
          4)Non-reversing.
          d.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 10.4.
          4)Non-reversing.
          e.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.2.
          4)Both reversing and non-reversing.
          ** NOTE TO SPECIFIER ** Water requirements are for models with Fire Response System Level 2 and 3. Delete if not required.
          15.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 40 to 120 psi (276 to 827 kPa).
 
          E.Basis of Design: T-120 Express O-Series Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 120 lbs (54.4 kg).
          2.Cylinder Volume: 36.1 cu ft (1022.2 L).
          3.Tumbler Speed: 36.5 rpm.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete motor size option not required.
          4.Motor Size: 1 and 1 hp (0.75 and 0.75 kW).
          5.Motor Size: 0.75 and 1 hp (0.56 and 0.75 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model with 10 inch outlet, second subparagraph below is for 60 Hz model with 12 inch outlet, and third subparagraph below is for 50 Hz model. Delete air flow options not required.
          6.Air Flow: 1250 cu ft per min (35.4 cu m per min).
          7.Air Flow: 1450 cu ft per min (41.1 cu m per min).
          8.Air Flow: 1000 cu ft per min (28.3 cu m per min).
          9.Dimensions (HxWxD): 85-5/16 x 46-3/4 x 60-3/16 inches (2167 x 1187 x 1529 mm).
          10.Net Weight: 1075 lbs (487.6 kg).
          11.Shipping Dimensions (HxWxD): 88-3/8 x 48-1/4 x 68-1/2 inches (2245 x 1226 x 1740 mm).
          12.Shipping Weight: 1122 lbs (508.9 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          13.Gas Requirements:
          a.Gas Supply Connection: 3/4 inch (19.1 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 320,000 BTU per hr (93.8 kW).
          e.Gas Usage: 300,000 BTU per hr (87.9 kW).
          14.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 25.
          3)Running Amps: 15.
          4)Reversing.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 15.
          4)Reversing.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 10.
          4)Reversing.
          ** NOTE TO SPECIFIER ** Water requirements are for models with Fire Response System Level 2 and 3. Delete if not required.
          15.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 40 to 120 psi (276 to 827 kPa).
          ** NOTE TO SPECIFIER ** Dexter on-premise washers are engineered to show up for work in even the harshest laundry environments. Delete article if not required.
 
          2.4ON-PREMISE 6-CYCLE WASHERS
 
          A.General:
          1.Cycles: 6 programmable cycles.
          2.Construction:
          a.Bearings: Heavy-duty bearings in cast iron housing.
          b.Spider and Shaft: Welded steel.
          c.Doors: Polished chrome.
          d.Tub and Cylinder: AISI 304 stainless steel.
          e.Top, Front, and Side Panels: AISI 304 stainless steel.
          3.Efficiency Features:
          a.Electronic pressure sensor offers a range of water level options.
          b.Perforated cylinder.
          c.Raised baffles.
          d.Automatic chemical injection.
          ** NOTE TO SPECIFIER ** Delete basis of design options not required.
 
          B.Basis of Design: T-300 Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 20 lbs (9.1 kg).
          2.Cylinder Volume: 2.7 cu ft (76.5 L).
          3.High Extract Speed: 100 g-force (579 rpm).
          4.Intermediate Extract Speed: 60 g-force (449 rpm).
          5.Washing Speed: 0.9 g-force (55 rpm).
          6.Motor Size: 1 hp (0.75 kW).
          7.Dimensions (HxWxD): 43-7/8 x 26 x 25 inches (1114 x 660 x 635 mm).
          8.Net Weight: 317 lbs (143.8 kg).
          9.Shipping Dimensions (HxWxD): 50 x 27-1/4 x 30-1/2 inches (1270 x 692 x 775 mm).
          10.Shipping Weight: 340 lbs (154.2 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 2-1/4 inches (57 mm).
          e.Floor to Center for Drain: 6 inches (152 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 13.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 4.
          c.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 4.
          d.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 4.
 
          C.Basis of Design: T-400 Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Cylinder Volume: 4 cu ft (113.3 L).
          3.High Extract Speed: 100 g-force (532 rpm).
          4.Intermediate Extract Speed: 60 g-force (412 rpm).
          5.Washing Speed: 0.9 g-force (50 rpm).
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 48-3/16 x 29-7/8 x 27-3/8 inches (1224 x 759 x 695 mm).
          8.Net Weight: 432 lbs (196 kg).
          9.Shipping Dimensions (HxWxD): 53-1/4 x 31-1/2 x 33-1/2 inches (1353 x 800 x 851 mm).
          10.Shipping Weight: 450 lbs (204.1 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 4-11/16 inches (119 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          D.Basis of Design: T-600 Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 40 lbs (18.1 kg).
          2.Cylinder Volume: 6 cu ft (170 L).
          3.High Extract Speed: 100 g-force (532 rpm).
          4.Intermediate Extract Speed: 60 g-force (412 rpm).
          5.Washing Speed: 0.9 g-force (50 rpm).
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 49-11/16 x 29-7/8 x 36 inches (1262 x 759 x 914 mm).
          8.Net Weight: 558 lbs (253.1 kg).
          9.Shipping Dimensions (HxWxD): 54-3/4 x 31-1/2 x 41 inches (1391 x 800 x 1041 mm).
          10.Shipping Weight: 580 lbs (263.1 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 5 inches (127 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          E.Basis of Design: T-900 Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 60 lbs (27.2 kg).
          2.Cylinder Volume: 9 cu ft (254.9 L).
          3.High Extract Speed: 100 g-force (485 rpm).
          4.Intermediate Extract Speed: 60 g-force (375 rpm).
          5.Washing Speed: 0.9 g-force (43 rpm).
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 55-3/8 x 34-3/8 x 38-7/8 inches (1407 x 873 x 988 mm).
          8.Net Weight: 964 lbs (437.3 kg).
          9.Shipping Dimensions (HxWxD): 61-1/2 x 36 x 44-1/4 inches (1562 x 914 x 1124 mm).
          10.Shipping Weight: 980 lbs (444.5 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 20.
          e.Running Amps: 8.4.
 
          F.Basis of Design: T-1200 Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 80 lbs (36.3 kg).
          2.Cylinder Volume: 11.5 cu ft (325.6 L).
          3.High Extract Speed: 100 g-force (485 rpm).
          4.Intermediate Extract Speed: 60 g-force (375 rpm).
          5.Washing Speed: 0.9 g-force (43 rpm).
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 57-7/8 x 34-3/8 x 45-3/8 inches (1470 x 873 x 1153 mm).
          8.Net Weight: 1022 lbs (463.6 kg).
          9.Shipping Dimensions (HxWxD): 63-3/4 x 36 x 52-3/16 inches (1619 x 914 x 1326 mm).
          10.Shipping Weight: 1063 lbs (482.2 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 and 12 gal per min (34 and 45 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 8-5/8 inches (218 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 20.
          e.Running Amps: 8.4.
 
          G.Basis of Design: T-350 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 20 lbs (9.1 kg).
          2.Cylinder Volume: 2.7 cu ft (76.5 L).
          3.High Extract Speed: 200 g-force (819 rpm).
          4.Intermediate Extract Speed: 60 g-force (449 rpm).
          5.Washing Speed: 0.9 g-force (55 rpm).
          6.Motor Size: 1 hp (0.75 kW).
          7.Dimensions (HxWxD): 43-7/8 x 26 x 28 inches (1114 x 660 x 711 mm).
          8.Net Weight: 383 lbs (173.7 kg).
          9.Shipping Dimensions (HxWxD): 49-1/4 x 28-1/4 x 33-1/2 inches (1251 x 718 x 851 mm).
          10.Shipping Weight: 407 lbs (184.6 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 2-1/4 inches (57 mm).
          e.Floor to Center for Drain: 6 inches (152 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          H.Basis of Design: T-450 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Cylinder Volume: 3.8 cu ft (107.6 L).
          3.High Extract Speed: 200 g-force (750 rpm).
          4.Intermediate Extract Speed: 60 g-force (411 rpm).
          5.Washing Speed: 0.9 g-force (50 rpm).
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 48-3/16 x 29-7/8 x 28-1/4 inches (1224 x 759 x 718 mm).
          8.Net Weight: 526 lbs (238.6 kg).
          9.Shipping Dimensions (HxWxD): 53-1/4 x 31-1/2 x 33-1/2 inches (1353 x 800 x 851 mm).
          10.Shipping Weight: 544 lbs (246.8 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 5 inches (127 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          I.Basis of Design: T-650 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 40 lbs (18.1 kg).
          2.Cylinder Volume: 6 cu ft (170 L).
          3.High Extract Speed: 200 g-force (750 rpm).
          4.Intermediate Extract Speed: 60 g-force (411 rpm).
          5.Washing Speed: 0.9 g-force (50 rpm).
          6.Motor Size: 2 hp (1.5 kW).
          7.Dimensions (HxWxD): 53 x 29-7/8 x 38-1/8 inches (1346 x 759 x 968 mm).
          8.Net Weight: 744 lbs (337.5 kg).
          9.Shipping Dimensions (HxWxD): 58-3/4 x 31-1/2 x 43-3/4 inches (1492 x 800 x 1111 mm).
          10.Shipping Weight: 766 lbs (347.5 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-7/8 inches (175 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Select power requirements. Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 15.
          e.Running Amps: 6.2.
 
          J.Basis of Design: T-750 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 50 lbs (22.7 kg).
          2.Cylinder Volume: 6.5 cu ft (184.1 L).
          3.High Extract Speed: 200 g-force (685 rpm).
          4.Intermediate Extract Speed: 60 g-force (375 rpm).
          5.Washing Speed: 0.9 g-force (43 rpm).
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 53-7/8 x 34-3/8 x 32-7/8 inches (1369 x 873 x 835 mm).
          8.Net Weight: 920 lbs (417.3 kg).
          9.Shipping Dimensions (HxWxD): 60 x 36 x 38 inches (1524 x 914 x 965 mm).
          10.Shipping Weight: 947 lbs (417.3 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 20.
          e.Running Amps: 8.4.
 
          K.Basis of Design: T-950 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 60 lbs (27.2 kg).
          2.Cylinder Volume: 9 cu ft (254.9 L).
          3.High Extract Speed: 200 g-force (685 rpm).
          4.Intermediate Extract Speed: 60 g-force (375 rpm).
          5.Washing Speed: 0.9 g-force (43 rpm).
          6.Motor Size: 3 hp (2.2 kW).
          7.Dimensions (HxWxD): 55-3/8 x 34-3/8 x 38-7/8 inches (1407 x 873 x 987 mm).
          8.Net Weight: 1000 lbs (453.6 kg).
          9.Shipping Dimensions (HxWxD): 61-1/2 x 36 x 45-1/4 inches (1562 x 914 x 1149 mm).
          10.Shipping Weight: 1016 lbs (460.8 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 and 12 gal per min (34 and 45 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 12.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          d.Circuit Breaker Amps: 20.
          e.Running Amps: 12.
 
          L.Basis of Design: T-1450 Express Washer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 90 lbs (40.8 kg).
          2.Cylinder Volume: 13.7 cu ft (388 L).
          3.High Extract Speed: 200 g-force (617 rpm).
          4.Intermediate Extract Speed: 60 g-force (338 rpm).
          5.Washing Speed: 0.9 g-force (39 rpm).
          6.Motor Size: 6.7 hp (5 kW).
          7.Dimensions (HxWxD): 62-3/8 x 41-1/2 x 42-1/4 inches (1584 x 1054 x 1073 mm).
          8.Net Weight: 1322 lbs (599.6 kg).
          9.Shipping Dimensions (HxWxD): 69-1/4 x 43-1/8 x 48 inches (1759 x 1095 x 1219 mm).
          10.Shipping Weight: 1364 lbs (618.7 kg).
          11.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 and 12 gal per min (34 and 45 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 8-5/16 inches (211 mm).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 10.
          b.Power: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          1)Wire Size: No. 10.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.21 inches (5.3 mm).
          d.Circuit Breaker Amps: 30.
          e.Running Amps: 15.
          ** NOTE TO SPECIFIER ** Dexter on-premise dryers are engineered to show up for work in even the harshest laundry environments. Delete article if not required.
 
          2.5ON-PREMISE 6-CYCLE DRYERS
 
          A.General:
          1.Construction:
          a.Bearings: Heavy-duty bearings in cast iron housing.
          b.Cabinet: Fully welded and painted.
          c.Spider: Welded steel.
          ** NOTE TO SPECIFIER ** Delete tumbler option not required.
          d.Tumbler: Stainless steel.
          e.Tumbler: Galvanized steel.
          ** NOTE TO SPECIFIER ** Delete panels option not required.
          f.Panels: Painted white steel.
          g.Panels: Stainless steel.
          2.Efficiency Features:
          a.Perforated tumblers.
          b.Radial airflow.
          c.Efficient air circulation.
          3.Control Features:
          a.Anti-wrinkle feature.
          b.Cycles: 5 preset cycles and one temporary cycle.
          ** NOTE TO SPECIFIER ** Delete basis of design options not required.
 
          B.Basis of Design: T-30 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Cylinder Volume: 11.3 cu ft (320 L).
          3.Tumbler Speed: 47 rpm.
          4.Motor Size: 0.5 hp (0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          5.Air Flow: 830 cu ft per min (23.5 cu m per min).
          6.Air Flow: 690 cu ft per min (19.5 cu m per min).
          7.Dimensions (HxWxD): 72-1/4 x 31-1/2 x 41-3/4 inches (1835 x 800 x 1060 mm).
          8.Net Weight: 454 lbs (205.9 kg).
          9.Shipping Dimensions (HxWxD): 77-1/4 x 32-3/4 x 45-1/2 inches (1962 x 832 x 1156 mm).
          10.Shipping Weight: 499 lbs (226.3 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          11.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 90,000 BTU per hr (26.4 kW).
          e.Gas Usage: 74,000 BTU per hr (21.7 kW).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** First two options are for gas models, remaining options are for electric models. Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 9.6.
          4)Non-reversing.
          b.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.1.
          4)Non-reversing.
          c.Power: 24 kW, 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 2.
          2)Circuit Breaker Amps: 90.
          3)Running Amps: 85.
          4)Non-reversing.
          d.Power: 24 kW, 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 3.
          2)Circuit Breaker Amps: 80.
          3)Running Amps: 75.
          4)Non-reversing.
          e.Power: 20 kW, 208 volt, 60 Hz, 1 phase, 3 wires and ground.
          1)Wire Size: 1/0.
          2)Circuit Breaker Amps: 125.
          3)Running Amps: 120.
          4)Non-reversing.
          f.Power: 20 kW, 240 volt, 60 Hz, 1 phase, 3 wires and ground.
          1)Wire Size: 1/0.
          2)Circuit Breaker Amps: 110.
          3)Running Amps: 105.
          4)Non-reversing.
          g.Power: 24 kW, 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 0.52 inches (13.3 mm).
          2)Circuit Breaker Amps: 50.
          3)Running Amps: 45.
          4)Non-reversing.
 
          C.Basis of Design: T-50 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 50 lbs (22.7 kg).
          2.Cylinder Volume: 15.8 cu ft (447.4 L).
          3.Tumbler Speed: 45 rpm.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz standard model, second subparagraph below is for 50 Hz model, third subparagraph below is for 60 Hz reversing model. Delete motor size options not required.
          4.Motor Size: 1 hp (0.75 kW).
          5.Motor Size: 0.75 hp (0.56 kW).
          6.Motor Size: 2 and 0.5 hp (1.5 and 0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          7.Air Flow: 910 cu ft per min (25.8 cu m per min).
          8.Air Flow: 760 cu ft per min (21.5 cu m per min).
          ** NOTE TO SPECIFIER ** First subparagraph below is for standard model, second subparagraph below is for reversing model. Delete dimensions option not required.
          9.Dimensions (HxWxD): 72-1/4 x 34-1/2 x 48 inches (1835 x 876 x 1219 mm).
          10.Dimensions (HxWxD): 72-1/4 x 34-1/2 x 50 inches (1835 x 876 x 1270 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for standard model, second subparagraph below is for reversing model. Delete net weight option not required.
          11.Net Weight: 540 lbs (244.9 kg).
          12.Net Weight: 560 lbs (254 kg).
          ** NOTE TO SPECIFIER ** First subparagraph below is for standard model, second subparagraph below is for reversing model. Delete shipping domensions option not required.
          13.Shipping Dimensions (HxWxD): 77-1/4 x 36 x 51-1/2 inches (1962 x 914 x 1308 mm).
          14.Shipping Dimensions (HxWxD): 77-1/4 x 36 x 53-1/2 inches (1962 x 914 x 1359 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for standard model, second subparagraph below is for reversing model. Delete shipping weight option not required.
          15.Shipping Weight: 590 lbs (267.6 kg).
          16.Shipping Weight: 620 lbs (281.2 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          17.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 145,000 BTU per hr (42.5 kW).
          e.Gas Usage: 120,000 BTU per hr (35.2 kW).
          18.Electrical Requirements:
          ** NOTE TO SPECIFIER ** First three options are for gas models, remaining options are for electric models. Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 9.6.
          4)Non-Reversing.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.1.
          4)Reversing.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.1.
          4)Non-Reversing.
          d.Power: 24 kW, 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 2.
          2)Circuit Breaker Amps: 90.
          3)Running Amps: 85.
          4)Non-Reversing.
          e.Power: 30 kW, 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 1.
          2)Circuit Breaker Amps: 100.
          3)Running Amps: 100.
          4)Non-Reversing.
          f.Power: 24 kW, 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 3.
          2)Circuit Breaker Amps: 80.
          3)Running Amps: 75.
          4)Non-Reversing.
          g.Power: 30 kW, 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 2.
          2)Circuit Breaker Amps: 90.
          3)Running Amps: 90.
          4)Non-Reversing.
          h.Power: 24 kW, 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 0.52 inches (13.3 mm).
          2)Circuit Breaker Amps: 50.
          3)Running Amps: 45.
          4)Non-Reversing.
 
          D.Basis of Design: T-80 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 80 lbs (36.3 kg).
          2.Cylinder Volume: 23 cu ft (651.3 L).
          3.Tumbler Speed: 40 rpm.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model, third subparagraph below is for reversing models. Delete motor size options not required.
          4.Motor Size: 1 hp (0.75 kW).
          5.Motor Size: 0.75 hp (0.56 kW).
          6.Motor Size: 0.75 and 1 hp (0.56 and 0.75 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          7.Air Flow: 1200 cu ft per min (34 cu m per min).
          8.Air Flow: 1000 cu ft per min (28.3 cu m per min).
          9.Dimensions (HxWxD): 75-3/4 x 38-1/2 x 51-3/4 inches (1924 x 978 x 1314 mm).
          10.Net Weight: 715 lbs (324.3 kg).
          11.Shipping Dimensions (HxWxD): 80-3/4 x 40-1/4 x 55-1/2 inches (2051 x 1022 x 1410 mm).
          12.Shipping Weight: 770 lbs (349.3 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          13.Gas Requirements:
          a.Gas Supply Connection: 3/4 inch (19.1 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 tp 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 215,000 BTU per hr (63 kW).
          e.Gas Usage: 195,000 BTU per hr (57.1 kW).
          14.Electrical Requirements:
          ** NOTE TO SPECIFIER ** First three options are for gas models, remaining options are for electric models. Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 10.4.
          4)Both reversing and non-reversing.
          b.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.2.
          4)Both reversing and non-reversing.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.083 inches (2.1 mm).
          2)Circuit Breaker Amps: 10.
          3)Running Amps: 5.2.
          4)Non-reversing.
          d.Power: 30 kW, 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 1.
          2)Circuit Breaker Amps: 100.
          3)Running Amps: 100.
          4)Non-reversing.
          e.Power: 35 kW, 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 1/0.
          2)Circuit Breaker Amps: 125.
          3)Running Amps: 120.
          4)Non-reversing.
          f.Power: 30 kW, 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 2.
          2)Circuit Breaker Amps: 90.
          3)Running Amps: 90.
          4)Non-reversing.
          g.Power: 36 kW, 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: No. 1.
          2)Circuit Breaker Amps: 110.
          3)Running Amps: 105.
          4)Non-reversing.
          h.Power: 24 kW, 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          1)Wire Size: 0.52 inches (13.3 mm).
          2)Circuit Breaker Amps: 50.
          3)Running Amps: 45.
          4)Non-reversing.
 
          E.Basis of Design: T-120 Express O-Series Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 120 lbs (54.4 kg).
          2.Cylinder Volume: 36.1 cu ft (1022.2 L).
          3.Tumbler Speed: 36.5 rpm.
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete motor size option not required.
          4.Motor Size: 1 and 1 hp (0.75 and 0.75 kW).
          5.Motor Size: 0.75 and 1 hp (0.56 and 0.75 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model with 10 inch outlet, second subparagraph below is for 60 Hz model with 12 inch outlet, and third subparagraph below is for 50 Hz model. Delete air flow options not required.
          6.Air Flow: 1250 cu ft per min (35.4 cu m per min).
          7.Air Flow: 1450 cu ft per min (41.1 cu m per min).
          8.Air Flow: 1000 cu ft per min (28.3 cu m per min).
          9.Dimensions (HxWxD): 85-5/16 x 46-3/4 x 60-3/16 inches (2167 x 1187 x 1529 mm).
          10.Net Weight: 1075 lbs (487.6 kg).
          11.Shipping Dimensions (HxWxD): 88-3/8 x 48-1/4 x 68-1/2 inches (2245 x 1226 x 1740 mm).
          12.Shipping Weight: 1122 lbs (508.9 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          13.Gas Requirements:
          a.Gas Supply Connection: 3/4 inch (19.1 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 320,000 BTU per hr (93.8 kW).
          e.Gas Usage: 300,000 BTU per hr (87.9 kW).
          14.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 25.
          3)Running Amps: 15.
          4)Reversing.
          b.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 10.
          4)Reversing.
 
          F.Basis of Design: T-20x2 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 2 x 20 lbs (2 x 9.1 kg).
          2.Cylinder Volume: 7.0 cu ft (198 L).
          3.Motor Size, per dryer: 1/3 hp (0.248 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          4.Air Flow: 370 cu ft per min (10.5 cu m per min).
          5.Air Flow: 300 cu ft per min (8.5 cu m per min).
          6.Dimensions (HxWxD): 68-1/2 x 27 x 44-5/8 inches (1740 x 686 x 1133 mm).
          7.Net Weight: 615 lbs (279 kg).
          8.Shipping Weight: 650 lbs (295 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          9.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 14 inch (292 to 356 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 56,000 BTU per hr (16.4 kW).
          e.Gas Usage: 47,000 BTU per hr (13.8 kW).
          10.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 7.8.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 3.8.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 6.6.
 
          G.Basis of Design: T-30x2 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 2 x 30 lbs (2 x 13.6 kg).
          2.Cylinder Volume: 11.3 cu ft (319 L).
          3.Motor Size: 0.5 hp (0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          4.Air Flow: 600 cu ft per min (17.0 cu m per min).
          5.Air Flow: 500 cu ft per min (14.2 cu m per min).
          6.Dimensions (HxWxD): 76-1/4 x 31-1/2 x 49-1/2 inches (1937 x 800 x 1257 mm).
          7.Net Weight: 719 lbs (326 kg).
          8.Shipping Weight: 765 lbs (347 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          9.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13 1/2 inch (292 to 356 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 90,000 BTU per hr (26.4 kW).
          e.Gas Usage: 74,000 BTU per hr (21.7 kW).
          10.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 8.0.
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 5.0.
          c.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 15.
          3)Running Amps: 10.0.
 
          H.Basis of Design: T-50x2 Express Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 2 x 50 lbs (2 x 22.7 kg).
          2.Cylinder Volume: 15.84 cu ft (448 L).
          ** NOTE TO SPECIFIER ** Delete motor size options not required.
          3.Motor Size: 0.5 hp (0.38 kW)
          4.Motor Size: 0.75 hp (0.56 kW).
          5.Motor Size: 2 hp (1.5 kW)
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete air flow option not required.
          6.Air Flow: 650 cu ft per min (18.4 cu m per min).
          7.Air Flow: 510 cu ft per min (14.4 cu m per min).
          8.Dimensions (HxWxD): 79-1/4 x 34-1/2 x 54-3/4 inches (2012 x 876 x 1391 mm).
          9.Net Weight: 871 lbs (389 kg).
          10.Shipping Weight: 922 lbs (416 kg).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          11.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 356 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 108,000 BTU per hr (31.7 kW).
          e.Gas Usage: 96,500 BTU per hr (28.3 kW).
          12.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 10.
          2)Circuit Breaker Amps: 30.
          3)Running Amps: 20.0.
          4)Non-Reversing
          b.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 10.0.
          4)Non-Reversing
          c.Power: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: No. 12.
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 15.0.
          4)Reversing.
          d.Power: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          1)Wire Size: 0.14 inches (3.5 mm).
          2)Circuit Breaker Amps: 20.
          3)Running Amps: 10.0.
          4)Reversing and Non-Reversing.
          ** NOTE TO SPECIFIER ** Dexter on-premise washers are engineered to show up for work in even the harshest laundry environments. Delete article if not required.
 
          2.6ON-PREMISE 6-CYCLE STACK WASHER-DRYERS
 
          A.General:
          1.Cycles: 6 cycle washer and 6 cycle dryer.
          2.Construction:
          a.Bearings: Heavy-duty bearings in cast iron housing.
          b.Spider and Shaft: Welded steel.
          c.Doors: Polished chrome.
          d.Tub and Cylinder: AISI 304 stainless steel.
          e.Top, Front, and Side Panels: AISI 304 stainless steel.
          ** NOTE TO SPECIFIER ** Delete tumbler option not required.
          f.Tumbler: Stainless steel.
          g.Tumbler: Galvanized steel.
          3.Efficiency Features:
          a.Electronic pressure sensor offers a range of water level options.
          b.Perforated cylinder.
          c.Raised baffles.
          d.Automatic chemical injection.
          ** NOTE TO SPECIFIER ** Delete basis of design options not required.
 
          B.Basis of Design: T-350 Express Stack Washer-Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 20 lbs (9.1 kg).
          2.Washer Cylinder Volume: 2.7 cu ft (76.5 L).
          3.Dryer Cylinder Volume: 7 cu ft (198.2 L).
          4.Washer High Extract Speed: 200 g-force (579 rpm).
          5.Washer Intermediate Extract Speed: 60 g-force (449 rpm).
          6.Washing Speed: 0.9 g-force (55 rpm).
          7.Washer Motor Size: 1 hp (0.75 kW).
          8.Dryer Tumbler Speed: 51 rpm.
          9.Dryer Motor Size: 1/3 hp (0.25 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete dryer air flow option not required.
          10.Dryer Air Flow: 370 cu ft per min (10.5 cu m per min).
          11.Dryer Air Flow: 300 cu ft per min (8.5 cu m per min).
          12.Dimensions (HxWxD): 74-3/4 x 27 x 44-5/8 inches (1899 x 686 x 1137 mm).
          13.Net Weight: 800 lbs (362.9 kg).
          14.Shipping Dimensions (HxWxD): 80-5/8 x 29-1/4 x 49-3/4 inches (2050 x 743 x 1264 mm).
          15.Shipping Weight: 840 lbs (381 kg).
          16.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 2-1/4 inches (57 mm).
          e.Floor to Center for Drain: 5-7/8 inches (149 mm).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          17.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 56,000 BTU per hr (16.4 kW).
          e.Gas Usage: 47,000 BTU per hr (13.8 kW).
          18.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power, Gas Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          4)Dryer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          5)Wire Size: No. 12.
          6)Dryer Circuit Breaker Amps: 15.
          7)Dryer Running Amps: 3.9.
          8)Dryer: Non-reversing.
          b.Power, Gas Dryer:
          1)Washer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          2)Dryer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          3)Wire Size: 0.14 inches (3.5 mm).
          4)Dryer Circuit Breaker Amps: 15.
          5)Dryer Running Amps: 3.4.
          6)Dryer: Non-reversing.
          c.Power, Electric Dryer:
          1)Washer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          2)Dryer: 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          3)Washer Wire Size: 0.14 inches (3.5 mm).
          4)Dryer Wire Size: 0.33 inches (8.5 mm).
          5)Dryer Circuit Breaker Amps: 30.
          6)Dryer Running Amps: 30.
          7)Dryer: Non-reversing.
          d.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 4.
          6)Dryer Circuit Breaker Amps: 60.
          7)Dryer Running Amps: 55.
          8)Dryer: Non-reversing.
          e.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 240 volt, 60 Hz, 3 phase, 3 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 4.
          6)Dryer Circuit Breaker Amps: 50.
          7)Dryer Running Amps: 50.
          8)Dryer: Non-reversing.
          f.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 208 volt, 60 Hz, 1 phase, 3 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 1.
          6)Dryer Circuit Breaker Amps: 100.
          7)Dryer Running Amps: 100.
          8)Dryer: Non-reversing.
          g.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 240 volt, 60 Hz, 1 phase, 4 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 2.
          6)Dryer Circuit Breaker Amps: 90.
          7)Dryer Running Amps: 85.
          8)Dryer: Non-reversing.
          h.Washer Circuit Breaker Amps: 15.
          i.Washer Running Amps: 6.2.
 
          C.Basis of Design: T-450 Express Stack Washer-Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 30 lbs (13.6 kg).
          2.Washer Cylinder Volume: 4 cu ft (113.3 L).
          3.Dryer Cylinder Volume: 11.3 cu ft (320 L).
          4.Washer High Extract Speed: 200 g-force (750 rpm).
          5.Washer Intermediate Extract Speed: 60 g-force (411 rpm).
          6.Washing Speed: 0.9 g-force (50 rpm).
          7.Washer Motor Size: 2 hp (1.5 kW).
          8.Dryer Tumbler Speed: 47 rpm.
          9.Dryer Motor Size: 1/2 hp (0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete dryer air flow option not required.
          10.Dryer Air Flow: 500 cu ft per min (14.6 cu m per min).
          11.Dryer Air Flow: 450 cu ft per min (12.7 cu m per min).
          12.Dimensions (HxWxD): 78-3/8 x 31-1/2 x 49-7/16 inches (1990 x 800 x 1256 mm).
          13.Net Weight: 1051 lbs (476.7 kg).
          14.Shipping Dimensions (HxWxD): 84 x 34 x 54 inches (2134 x 864 x 1372 mm).
          15.Shipping Weight: 1101 lbs (499.4 kg).
          16.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 4-7/16 inches (113 mm).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          17.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 80,000 BTU per hr (23.4 kW).
          e.Gas Usage: 74,000 BTU per hr (21.7 kW).
          18.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power, Gas Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 120 volt, 60 Hz, 1 phase, 2 wires and ground.
          a)Dryer Circuit Breaker Amps: 15.
          b)Dryer Running Amps: 4.
          4)Dryer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          a)Dryer Circuit Breaker Amps: 15.
          b)Dryer Running Amps: 2.5.
          5)Wire Size: No. 12.
          6)Dryer: Non-reversing.
          b.Power, Gas Dryer:
          1)Washer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          2)Dryer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          3)Wire Size: 0.14 inches (3.5 mm).
          4)Dryer Circuit Breaker Amps: 15.
          5)Dryer Running Amps: 5.
          6)Dryer: Non-reversing.
          c.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 208 volt, 60 Hz, 3 phase, 4 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 2.
          6)Dryer Circuit Breaker Amps: 90.
          7)Dryer Running Amps: 85.
          8)Dryer: Non-reversing.
          d.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 240 volt, 60 Hz, 3 phase, 4 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: No. 3.
          6)Dryer Circuit Breaker Amps: 80.
          7)Dryer Running Amps: 75.
          8)Dryer: Non-reversing.
          e.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 208 volt, 60 Hz, 1 phase, 3 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: 1/0.
          6)Dryer Circuit Breaker Amps: 125.
          7)Dryer Running Amps: 120.
          8)Dryer: Non-reversing.
          f.Power, Electric Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 240 volt, 60 Hz, 1 phase, 3 wires and ground.
          4)Washer Wire Size: No. 12.
          5)Dryer Wire Size: 1/0.
          6)Dryer Circuit Breaker Amps: 110.
          7)Dryer Running Amps: 105.
          8)Dryer: Non-reversing.
          g.Power, Electric Dryer:
          1)Washer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          2)Dryer: 400 volt, 50 Hz, 3 phase, 4 wires and ground.
          3)Washer Wire Size: 0.14 inches (3.5 mm).
          4)Dryer Wire Size: 0.52 inches (13.3 mm).
          5)Dryer Circuit Breaker Amps: 50.
          6)Dryer Running Amps: 45.
          7)Dryer: Non-reversing.
          h.Washer Circuit Breaker Amps: 15.
          i.Washer Running Amps: 6.5.
 
          D.Basis of Design: T-750 Express Stack Washer-Dryer; as manufactured by Dexter Laundry.
          1.Dry Weight Capacity: 50 lbs (22.7 kg).
          2.Washer Cylinder Volume: 6.5 cu ft (184.1 L).
          3.Dryer Cylinder Volume: 15.8 cu ft (447.4 L).
          4.Washer High Extract Speed: 200 g-force (685 rpm).
          5.Washer Intermediate Extract Speed: 60 g-force (375 rpm).
          6.Washing Speed: 0.9 g-force (43 rpm).
          7.Washer Motor Size: 3 hp (2.2 kW).
          8.Dryer Tumbler Speed: 45 rpm.
          9.Dryer Motor Size: 2 and 1/2 hp (1.5 and 0.38 kW).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete dryer air flow option not required.
          10.Dryer Air Flow: 650 cu ft per min (18.4 cu m per min).
          11.Dryer Air Flow: 510 cu ft per min (14.4 cu m per min).
          12.Dimensions (HxWxD): 87-3/16 x 34-1/2 x 54-5/8 inches (2215 x 876 x 1387 mm).
          13.Net Weight: 1600 lbs (725.7 kg).
          14.Shipping Dimensions (HxWxD): 91-5/8 x 35-7/8 x 63-1/2 inches (2327 x 911 x 1613 mm).
          15.Shipping Weight: 1650 lbs (748.4 kg).
          16.Water Requirements:
          a.Inlet Size: 3/4 inch (19 mm).
          b.Pressure: 30 to 120 psi (207 to 827 kPa).
          c.Flow Rate Per Value: 9 gal per min (34 L per min).
          d.Drain Diameter (O.D.): 3 inches (76 mm).
          e.Floor to Center for Drain: 6-5/8 inches (168 mm).
          ** NOTE TO SPECIFIER ** Gas requirements are for gas models only. Delete if not required.
          17.Gas Requirements:
          a.Gas Supply Connection: 1/2 inch (12.7 mm).
          b.Natural Gas Supply (Water Column): 5 to 10 inch (127 to 254 mm).
          c.LP Gas Supply (Water Column): 11-1/2 to 13-1/2 inch (292 to 343 mm).
          ** NOTE TO SPECIFIER ** First subparagraph below is for 60 Hz model, second subparagraph below is for 50 Hz model. Delete gas usage option not required.
          d.Gas Usage: 108,000 BTU per hr (31.7 kW).
          e.Gas Usage: 96,000 BTU per hr (28.3 kW).
          18.Electrical Requirements:
          ** NOTE TO SPECIFIER ** Delete power options not required.
          a.Power, Gas Dryer:
          1)Washer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          2)Washer: 208-240 volt, 60 Hz, 3 phase, 3 wires and ground.
          3)Dryer: 208-240 volt, 60 Hz, 1 phase, 2 wires and ground.
          a)Dryer Circuit Breaker Amps: 15.
          b)Dryer Running Amps: 10.
          c)Reversing.
          4)Wire Size: No. 12.
          b.Power, Gas Dryer:
          1)Washer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          2)Dryer: 230 volt, 50 Hz, 1 phase, 2 wires and ground.
          3)Wire Size: 0.14 inches (3.5 mm).
          4)Dryer Circuit Breaker Amps: 15.
          5)Dryer Running Amps: 10.
          6)Dryer: Reversing.
          c.Washer Circuit Breaker Amps: 20.
          d.Washer Running Amps: 8.4.
 
          PART 3EXECUTION
 
          3.1EXAMINATION
 
          A.Do not begin installation until substrates have been properly constructed and prepared.
 
          B.If substrate preparation is the responsibility of another installer, notify Architect in writing of unsatisfactory preparation before proceeding.
 
          C.Verify that support slab meets manufacturer's recommendations.
 
          3.2PREPARATION
 
          A.Clean surfaces thoroughly prior to installation.
 
          B.Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
 
          3.3INSTALLATION
 
          A.Install in accordance with manufacturer's instructions approved submittals and in proper relationship with adjacent construction.
          1.Follow manufacturer's recommendations for clearance between machines and behind machines.
 
          3.4CLEANING AND PROTECTION
 
          A.Clean products in accordance with the manufacturer's recommendations.
 
          B.Touch-up, repair or replace damaged products before Substantial Completion.
 
         
END OF SECTION