MasterFormat: 95
Download this Specification for   WORD | WP | RTF | TEXT
Find over 500 more construction specifications | Arcat.com
         
 
         
SECTION 16522 - LED LIGHTING*
 
         
LED LIGHTING
 
         
 
         
Copyright 2014 ARCAT, Inc. - All rights reserved

          ** NOTE TO SPECIFIER ** Philips Wide-Lite; LED lighting.
This section is based on the products of Philips Wide-Lite which is located at:
1611 Clovis Barker Road
San Marcos, TX 78741
Toll Free: 800-235-2314
Phone: 512-392-5821
Fax: 512-753-1122
Email: wqe.info@philips.com
Web Site: www.wide-lite.com
Since 1955, Philips Wide-Lite has delivered on the promise of supplying the highest quality lighting solutions available with the highest level of customer service. Our design and manufacturing philosophy is based on superior optical performance, the use of quality materials throughout the luminaire, excellent mechanical design, best of class thermal management and industry leading control options. This award winning commitment to engineering excellence allows us to provide low lifecycle cost, green friendly and innovative product solutions to both the owners and specification community.
We are proud to offer you the following broad range of products utilizing the most complete package of lighting sources combined with the latest in technology available today. We also promise to continue to design and develop both relevant and innovative architectural luminaires for tomorrow as technologies continue to advance.
 
          PART 1GENERAL
 
          1.1SECTION INCLUDES
          ** NOTE TO SPECIFIER ** Delete items below not required for project.
 
          A.LED lighting fixtures including the following:
          1.Area and site LED lighting. (AeroScape, HIBRED, QLA, SiteMaster)
          2.Parking garage LED lighting. (VizorLED Gen-2, QLP Gen-2)
          3.Wall mount LED lighting. (AeroScape, GeoMatrixx, Geoscapes, QLW-7G1, and QLW-16G1)
          4.Architectural LED floodlighting. (TAG, QLF, and Universal Flood)
          5.Gas Station Canopy LED Lighting (Mini 300 LED Gen-2)
          6.Industrial LED lighting. (BayLyter LED)
 
          1.2RELATED SECTIONS
          ** NOTE TO SPECIFIER ** Delete sections below not relevant to this project; add others as required.
 
          A.Section 16050 - Basic Electrical Materials and Methods.
 
          B.Section 16570 - Dimming Controls.
 
          1.3REFERENCES
          ** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
 
          A.ASTM International (ASTM).
 
          B.American National Standards Institute (ANSI): ANSI C62.41.2 - Transient Surge Requirements.
 
          C.Intertek: ETL/cETL Listings.
 
          D.EU Directive for Restriction of Hazardous Substances (RoHS).
 
          E.Design Lights Consortium (DLC): Product Certified.
 
          F.International Organization for Standardization (ISO):
          1.Ingress Protection (IP) ratings system.
          2.ISO 9001 - Quality Management Systems - Requirements.
 
          G.Underwriters Laboratories, Inc. (UL):
          1.UL 924 - Emergency Lighting and Power Equipment.
          2.UL 1598 - Luminaries.
          3.UL 8750 - Light Emitting Diode (LED) for Use in Lighting Products.
 
          1.4SUBMITTALS
 
          A.Submit under provisions of Section 01300.
 
          B.Product Data: Manufacturer's data sheets for each product type specified, including but not limited to:
          1.Preparation instructions and recommendations.
          2.Storage and handling requirements and recommendations.
          3.Installation Instructions.
 
          C.Shop Drawings: Provide shop drawings showing details including but not limited to electrical connections, power requirements, mounting details and locations.
          ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
 
          D.Selection Samples: For each assembly type, two complete sets of samples representing manufacturer's full range of available materials and finishes.
 
          E.Verification Samples: For each finish product specified, two samples representing actual materials and finishes.
 
          1.5QUALITY ASSURANCE
 
          A.Single Source Requirements: To the greatest extent possible, provide products specified in this section from a single manufacturer.
 
          B.Manufacturer Qualifications: The quality systems of the facilities of manufacturer must be registered by UL to ISO 9001 series standards.
          ** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
 
          C.Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
          1.Finish areas designated by Architect.
          2.Do not proceed with remaining work until workmanship is approved by Architect.
          3.Rework mock-up area as required to produce acceptable work.
 
          1.6DELIVERY, STORAGE AND HANDLING
 
          A.Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.
 
          B.Store products in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.
 
          1.7PROJECT CONDITIONS
 
          A.Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
 
          1.8SEQUENCING AND SCHEDULING
 
          A.Conference: Convene a pre-installation conference to establish procedures to maintain optimum working conditions and to coordinate this work with related and adjacent work.
 
          1.9WARRANTY
 
          A.Manufacturer's Warranty for LED Fixtures: Standard limited warranty against defects in materials and manufacturing.
          ** NOTE TO SPECIFIER ** The following applies to Aeroscape, HIBRED, Geoscape, Quality, SiteMaster models only. Delete warranty periods for products not required.
          1.Warranty Period for Area and Site LED Lighting: 5 years.
          ** NOTE TO SPECIFIER ** The following applies to VizorLED Gen-2, Quality LED Gen-2, MiniPro models only. Delete if not required.
          2.Warranty Period for Parking and Under Canopy Fixtures: 5 years.
          ** NOTE TO SPECIFIER ** The following applies to Aeroscape, GeoMatrixx, Geoscape models only. Delete if not required.
          3.Warranty Period for Wall Mount LED Lighting: 5 years.
          ** NOTE TO SPECIFIER ** The following applies to TAG and UF models only. Delete if not required.
          4.Warranty Period for Architectural LED Floodlighting: 5 years.
          ** NOTE TO SPECIFIER ** The following applies to BayLyter models only. Delete if not required.
          5.Warranty Period for Four-Pod Industrial Luminaires: 5 years.
 
          PART 2PRODUCTS
 
          2.1MANUFACTURERS
 
          A.Acceptable Manufacturer: Philips Wide-Lite, which is located at: 1611 Clovis Barker Rd. ; San Marcos, TX 78741; Toll Free Tel: 800-235-2314; Tel: 512-392-5821; Fax: 512-753-1122; Email: request info; Web: www.wide-lite.com
          ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
 
          B.Substitutions: Not permitted.
 
          C.Requests for substitutions will be considered in accordance with provisions of Section 01600.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.2AREA AND SITE LED LIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Area and Site LED Lighting: AeroScape Series Small as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 66 rating.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: As scheduled or indicated on Drawings.
          3.Optical System: 64 G1 Rebel ES LEDs, 700 mA.
          4.Optical System: 80 G1 Rebel ES LEDs, 350 mA.
          5.Optical System: 80 G1 Rebel ES LEDs, 530 mA.
          6.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          7.Housings: Die-cast aluminum housing, 22 inch (560 mm) optical opening; optic chamber and separate driver housing constructed to IP66.
          8.Hardware: Corrosion resistant hardware.
          9.Heat Sinks: Die-cast aluminum heatsinks.
          10.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          11.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 60.
          12.Boards: Metal core printed circuit board.
          13.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          14.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          15.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          16.Fixture Configuration: As scheduled or indicated on Drawings.
          17.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting Configuration: As scheduled or indicated on Drawings.
          b.Mounting Configuration: 1 at 90 degrees.
          c.Mounting Configuration: 2 at 90 degrees.
          d.Mounting Configuration: 2 at 180 degrees.
          e.Mounting Configuration: 3 at 90 degrees.
          f.Mounting Configuration: 3 at 120 degrees.
          g.Mounting Configuration: 4 at 90 degrees.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          h.Mounting: Straight arm mount.
          i.Mounting: Upswept arm mount.
          j.Mounting Accessory: Wall mount Bracket.
          ** NOTE TO SPECIFIER ** Die-cast aluminum straight or upswept arm mount for mounting to 4 inches to 5 inches O.D. round poles. Square pole adapters included. Round pole adapter accessories required for mounting to 3.0-3.9 inches round poles. Wall mount also available. Delete options for mounting accessory not required.
          k.Mounting Accessory: Provide optional Round pole adapter.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          l.Distribution: Type II.
          m.Distribution: Type II rotated 90 degrees.
          n.Distribution: Type II rotated 270 degrees.
          o.Distribution: Type III.
          p.Distribution: Type III rotated 90 degrees.
          q.Distribution: Type III rotated 270 degrees.
          r.Distribution: Type IV.
          s.Distribution: Type IV rotated 90 degrees.
          t.Distribution: Type IV rotated 270 degrees.
          u.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          v.Voltage: 120 V.
          w.Voltage: 208 V.
          x.Voltage: 240 V.
          y.Voltage: 277 V.
          z.Voltage: 347 V.
          aa.Voltage: 480 V.
          ab.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          ac.Fusing: Single Fusing (120, 277, 347 V).
          ad.Fusing: Double Fusing (208, 240, 480 V).
          ae.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          af.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          ag.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          ah.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          ai.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          aj.Shield: Provide optional house side shield.
          ak.Provide optional twist lock photocell receptacle.
          al.Provide optional twist lock receptacle with photocell.
          am.Stone Guard: Provide optional field installed stone guard.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          B.Area and Site LED Lighting: AeroScape Series Large as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 66 rating.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: As scheduled or indicated on Drawings.
          3.Optical System: 128 G1 Rebel ES LEDs, 700 mA.
          4.Optical System: 160 G1 Rebel ES LEDs, 350 mA.
          5.Optical System: 160 G1 Rebel ES LEDs, 530 mA.
          6.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          7.Housings: Die-cast aluminum housing, 32 inch (813 mm) optical opening; optic chamber and separate driver housing constructed to IP66.
          8.Hardware: Corrosion resistant hardware.
          9.Heat Sinks: Die-cast aluminum heatsinks.
          10.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          11.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 60.
          12.Boards: Metal core printed circuit board.
          13.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          14.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          15.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          16.Fixture Configuration: As scheduled or indicated on Drawings.
          17.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting Configuration: As scheduled or indicated on Drawings.
          b.Mounting Configuration: 1 at 90 degrees.
          c.Mounting Configuration: 2 at 90 degrees.
          d.Mounting Configuration: 2 at 180 degrees.
          e.Mounting Configuration: 3 at 90 degrees.
          f.Mounting Configuration: 3 at 120 degrees.
          g.Mounting Configuration: 4 at 90 degrees.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          h.Mounting: Straight arm mount.
          i.Mounting: Upswept arm mount.
          j.Mounting Accessory: Wall mount bracket.
          ** NOTE TO SPECIFIER ** Die-cast aluminum straight or upswept arm mount for mounting to 4 inches to 5 inches O.D. round poles. Square pole adapters included. Round pole adapter accessories required for mounting to 3.0-3.9 inches round poles. Wall mount also available. Delete options for mounting accessory not required.
          k.Mounting Accessory: Provide optional Round pole adapter.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          l.Distribution: Type II.
          m.Distribution: Type II rotated 90 degrees.
          n.Distribution: Type II rotated 270 degrees.
          o.Distribution: Type III.
          p.Distribution: Type III rotated 90 degrees.
          1)Distribution: Type III rotated 270 degrees.
          q.Distribution: Type IV.
          r.Distribution: Type IV rotated 90 degrees.
          s.Distribution: Type IV rotated 270 degrees.
          t.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          u.Voltage: 120 V.
          v.Voltage: 208 V.
          w.Voltage: 240 V.
          x.Voltage: 277 V.
          y.Voltage: 347 V.
          z.Voltage: 480 V.
          aa.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          ab.Fusing: Single Fusing (120, 277, 347 V).
          ac.Fusing: Double Fusing (208, 240, 480 V).
          ad.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          ae.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          af.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          ag.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          ah.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          ai.Shield: Provide optional house side shield.
          aj.Provide optional twist lock photocell receptacle.
          ak.Provide optional twist lock receptacle with photocell.
          al.Stone Guard: Provide optional field installed stone guard.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          C.Area and Site LED Lighting: Optra 2 OP2L LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers and Boards: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing and Optic Chamber: IP 65 rating.
          2.Finish: Standard, UltraClad polyester powder coating, 2.5 mil nominal thickness, electrostatically applied and oven cured to ensure extreme durability.
          3.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          4.Housing: Die-cast aluminum with 24 inch (610 mm) optical housing
          5.Hardware: Corrosion resistant.
          6.Heat Sinks: Die-cast aluminum heatsinks.
          7.Optical Head: Equipped with an electrical disconnect and is fully gasketed to ensure Dust-Tite construction for higher maintained light levels.
          8.Boards: Aluminum metal clad board.
          9.Optical System: 49 Lumiled Rebel LEDs.
          10.Color Temperature: Neutral White, 4000 K +/- 250K.
          11.Drivers: 525mA constant current, high efficiency multi-volt driver (50 or 60hz); open / short circuit protection
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          12.Fixture Configuration: As scheduled or indicated on Drawings.
          13.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting Configuration: Post Top.
          b.Mounting Configuration: 1 at 90 degrees.
          c.Mounting Configuration: 2 at 90 degrees.
          d.Mounting Configuration: 2 at 120 degrees.
          e.Mounting Configuration: 2 at 180 degrees.
          f.Mounting Configuration: 3 at 90 degrees.
          g.Mounting Configuration: 3 at 120 degrees.
          h.Mounting Configuration: 4 at 90 degrees.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          i.Mounting: Arm Mount to 4 inch - 5 inch OD Round Pole, die-cast aluminum.
          j.Mounting: Arm Mount to 3 inch - 3.9 inch OD Round Pole, die-cast aluminum.
          k.Mounting: Arm Mount to 3 inch - 5 inch Square Pole, die-cast aluminum.
          l.Mounting: Post Top Mount to 4 inch OD Round Pole, die-cast aluminum.
          m.Mounting: Post Top Mount to 3 inch OD Round Pole, die-cast aluminum.
          ** NOTE TO SPECIFIER ** Delete options for mounting accessories not required.
          n.Mounting Accessories: Provide optional Round Pole Tenon Adapter.
          o.Mounting Accessories: Provide optional Square Pole Tenon Adapter.
          p.Mounting Accessories: Wall Mount Junction Box.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          q.Distribution: Type II.
          r.Distribution: Type III.
          s.Distribution: Type IV.
          t.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          u.Voltage: 120 V.
          v.Voltage: 208 V.
          w.Voltage: 240 V.
          x.Voltage: 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          y.Fusing: Single Fusing (120, 277 V).
          z.Fusing: Double Fusing (208, 240 V).
          ** NOTE TO SPECIFIER ** Delete options for lenses not required.
          aa.Lenses: None (Standard.)
          ab.Lenses: Clear (flat glass).
          ac.Lenses: Diffuse (flat glass).
          ** NOTE TO SPECIFIER ** Delete optional accessories not required.
          ad.Photocontrol Button: Provide optional photocell button.
          ae.Shielding: External House Side Shield.
          ** NOTE TO SPECIFIER ** The HIBRED System is compatible with the following Philips Wide-Lite luminaire series: EAL19, AL3, AL3R (see ARCAT section 16520 - Walkway Lighting). Specified below as a Standalone unit (' STND'). Delete if not required.
 
          D.Area and Site LED Lighting: HIBRED STND standalone units as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          2.Operating System: HOPS HIBRED Operating System Control Box.
          3.Construction: Heavy duty aluminum heatsink, 6063-T5, optimally engineered. Suitable for wet locations.
          4.Drivers: Constant output voltage of 24V
          5.Optical System: 21 Cree XPG LEDs, minimum 122 lumens at 350mA).
          6.Color Temperature: Neutral White 4000K +/- 250K; CRI of 72 +/- 3.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          7.Fixture Configuration: As scheduled or indicated on Drawings.
          8.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          a.Mounting: Standard, pole mounted units; hipped with adapters to fit 3 inch (76 mm) - 5 inch (127 mm) O.D. round poles or square poles.
          b.Mounting: Tenon adapter mounting for round or square poles.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          c.Distribution: Type III.
          d.Distribution: Type III rotated 90 degrees.
          e.Distribution: Type III rotated 270 degrees.
          f.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          g.Voltage: 120 V.
          h.Voltage: 208 V.
          i.Voltage: 240 V.
          j.Voltage: 277 V.
          ** NOTE TO SPECIFIER ** Delete optional accessories not required.
          k.Shielding: External House Side Shield.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          E.Area and Site LED Lighting: Quality LED area and site small (QLA) as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 66 rating.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: 64 G1 Rebel ES LEDs, 700 mA.
          3.Optical System: 80 G1 Rebel ES LEDs, 350 mA.
          4.Optical System: 80 G1 Rebel ES LEDs, 530 mA.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          5.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          6.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          7.Housings: Die-cast aluminum housing, 22 inch (560 mm) optical opening; optic chamber and separate driver housing constructed to IP66.
          8.Hardware: Corrosion resistant hardware.
          9.Heat Sinks: Die-cast aluminum heatsinks.
          10.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          11.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 60.
          12.Boards: Metal core printed circuit board.
          13.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          14.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          15.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          16.Fixture Configuration: As scheduled or indicated on Drawings.
          17.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting Configuration: As scheduled or indicated on Drawings.
          b.Mounting Configuration: 1 at 90 degrees.
          c.Mounting Configuration: 2 at 90 degrees.
          d.Mounting Configuration: 2 at 180 degrees.
          e.Mounting Configuration: 3 at 90 degrees.
          f.Mounting Configuration: 3 at 120 degrees.
          g.Mounting Configuration: 4 at 90 degrees.
          h.Mounting: Straight arm mount.
          ** NOTE TO SPECIFIER ** Die-cast aluminum straight or upswept arm mount for mounting to 4 inches to 5 inches O.D. round poles. Square pole adapters included. Round pole adapter accessories required for mounting to 3.0-3.9 inches round poles. Wall mount also available. Delete options for mounting accessory not required.
          i.Mounting Accessory: Provide optional Round pole adapter.
          j.Mounting Accessory: Provide optional Square pole adapter.
          k.Mounting Accessory: Wall Mount Bracket
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          l.Distribution: Type II.
          m.Distribution: Type II rotated 90 degrees.
          n.Distribution: Type II rotated 270 degrees.
          o.Distribution: Type III.
          p.Distribution: Type III rotated 90 degrees.
          q.Distribution: Type III rotated 270 degrees.
          r.Distribution: Type IV.
          s.Distribution: Type IV rotated 90 degrees.
          t.Distribution: Type IV rotated 270 degrees.
          u.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          v.Voltage: 120 V.
          w.Voltage: 208 V.
          x.Voltage: 240 V.
          y.Voltage: 277 V.
          z.Voltage: 347 V.
          aa.Voltage: 480 V.
          ab.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          ac.Fusing: Single Fusing (120, 277, 347 V).
          ad.Fusing: Double Fusing (208, 240, 480 V).
          ae.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          af.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          ag.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          ah.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          ai.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          aj.Shield: Provide optional house side shield.
          ak.Provide optional photocontrol button.
          al.Provide optional twist lock photocell receptacle.
          am.Provide optional twist lock receptacle with photocell.
 
          F.Area and Site LED Lighting: Quality LED area and site large (QLA) as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 66 rating.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: 128 G1 Rebel ES LEDs, 700 mA.
          3.Optical System: 160 G1 Rebel ES LEDs, 350 mA.
          4.Optical System: 160 G1 Rebel ES LEDs, 530 mA.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          5.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          6.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          7.Housings: Die-cast aluminum housing, 32 inch (560 mm) optical opening; optic chamber and separate driver housing constructed to IP66.
          8.Hardware: Corrosion resistant hardware.
          9.Heat Sinks: Die-cast aluminum heatsinks.
          10.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          11.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 60.
          12.Boards: Metal core printed circuit board.
          13.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          14.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          15.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          16.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting Configuration: As scheduled or indicated on Drawings.
          b.Mounting Configuration: 1 at 90 degrees.
          c.Mounting Configuration: 2 at 90 degrees.
          d.Mounting Configuration: 2 at 180 degrees.
          e.Mounting Configuration: 3 at 90 degrees.
          f.Mounting Configuration: 3 at 120 degrees.
          g.Mounting Configuration: 4 at 90 degrees.
          h.Mounting: Straight arm mount.
          ** NOTE TO SPECIFIER ** Die-cast aluminum straight or upswept arm mount for mounting to 4 inches to 5 inches O.D. round poles. Square pole adapters included. Round pole adapter accessories required for mounting to 3.0-3.9 inches round poles. Wall mount also available. Delete options for mounting accessory not required.
          i.Mounting Accessory: Provide optional Round pole adapter.
          j.Mounting Accessory: Provide optional Square pole adapter.
          k.Mounting Accessory: Wall Mount Bracket
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          l.Distribution: Type II.
          m.Distribution: Type II rotated 90 degrees.
          n.Distribution: Type II rotated 270 degrees.
          o.Distribution: Type III.
          p.Distribution: Type III rotated 90 degrees.
          q.Distribution: Type III rotated 270 degrees.
          r.Distribution: Type IV.
          s.Distribution: Type IV rotated 90 degrees.
          t.Distribution: Type IV rotated 270 degrees.
          u.Distribution: Type V.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          v.Voltage: 120 V.
          w.Voltage: 208 V.
          x.Voltage: 240 V.
          y.Voltage: 277 V.
          z.Voltage: 347 V.
          aa.Voltage: 480 V.
          ab.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          ac.Fusing: Single Fusing (120, 277, 347 V).
          ad.Fusing: Double Fusing (208, 240, 480 V).
          ae.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          af.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          ag.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          ah.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          ai.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          aj.Shield: Provide optional house side shield.
          ak.Provide optional photocontrol button.
          al.Provide optional twist lock photocell receptacle.
          am.Provide optional twist lock receptacle with photocell.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          G.Area and Site LED Lighting: SiteMaster LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          2.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          3.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          4.Housing: Precision die-cast aluminum housing.
          5.Heat Sinks: Integral cast aluminum heat sinks.
          6.Lens Frame Assembly: Fully gasketed.
          7.Drivers: Electronic class II LED driver accepts 120-277v, 50/60hz input (constant current).
          8.Optical Systems: High-output LEDs; individual precision optics collect, redirect light.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          9.Fixture Configuration: As scheduled or indicated on Drawings.
          10.Fixture Configuration:
          a.Mounting: Factory installed die-cast aluminum arm with integral wiring/splice chamber; key slot design provides one person installation and leveling.
          ** NOTE TO SPECIFIER ** Delete optional mounting accessories not required.
          b.Mounting Accessory: Provide optional Round pole adapter.
          c.Mounting Accessory: Provide optional Square pole adapter.
          ** NOTE TO SPECIFIER ** Delete options for driver not required.
          d.Drivers: 08 driver.
          e.Drivers: 06 driver.
          ** NOTE TO SPECIFIER ** Delete options for optics not required.
          f.Optical System: Type II.
          g.Optical System: Type III.
          h.Optical System: Type V square distribution.
          i.Optical System: Type V rectangle distribution.
          ** NOTE TO SPECIFIER ** Delete options for color temperature not required.
          j.Color Temperature: Standard, 4000 K, 49 LEDs per unit.
          k.Color Temperature: Standard, 6000 K, 54 LEDs per unit.
          ** NOTE TO SPECIFIER ** Delete optional accessories not required.
          l.Provide optional Photocell Button.
          m.Provide optional Pencil Photocontrol.
          n.Provide optional Adjustable Arm.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.3PARKING GARAGE LED LIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Parking and Under Canopy Lights: VZ24-60G2 Series VizorLED Gen-2 as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          ** NOTE TO SPECIFIER ** Bi-axial symmetric distribution configurations only. Delete if not required.
          b.Design Lights Consortium (DLC) Certified.
          c.IP65 rating.
          2.Construction: Single piece die-cast upper housing; heavy duty extruded aluminum heatsink, 6063-T5, with clear anodized finish.
          3.Finish: Standard, textured Satin Aluminum corrosion resistant polyester powder finish.
          4.Optics: Non-Direct View (NDV) optics, high-lumen white LED array shielded from direct view; faceted MIRO reflector with minimum 94 percent reflectivity.
          5.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          6.LED and Board Arrays: Cree XPG (G2), minimum 122 lms/W; aluminum metal clad boards and 60 LED arrays. CRI = 75
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          7.Color Temperature: Standard, 4000 K +/- 250 K.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          8.Fixture Configuration: As scheduled or indicated on Drawings.
          9.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for driver not required.
          a.Drivers: 350 mA; open/short circuit protection.
          b.Drivers: 530 mA; open/short circuit protection.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          c.Distribution: Bi-axial symmetric.
          d.Distribution: Downlight.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          e.Mounting: Standard, Easy Hanger Plate, galvanized steel.
          f.Mounting: Bulk Pack Easy Hanger Plate.
          g.Mounting: Pendant mount with 24 inch (610 mm) leads.
          h.Mounting: Through-wire provisions.
          i.Mounting: Yoke mount.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          j.Voltage: 120 V.
          k.Voltage: 208 V.
          l.Voltage: 240 V.
          m.Voltage: 277 V.
          n.Voltage: 347 V.
          o.Voltage: 480 V.
          p.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Proximo occupancy detector (PX10) only available in 120, 277, and 347 V configurations; provides added energy savings of up to 94 percent during unoccupied periods. Fixtures with Proximo work as ' Smart Fixtures.' Delete if not required.
          q.Occupancy Sensors: Provide optional PX10 Proximo occupancy detectors; field programmable dimming, 10 percent low; includes dimming drivers.
          r.Wireless Control System: Web based system that operates through high density mesh wireless technology. Radio modules with motion and photocell sensors are incorporated into each luminaire to allow for remote communication.
          ** NOTE TO SPECIFIER ** Dimming driver available without Proximo option. Delete if not required.
          s.Dimming Driver: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power; leads supplied for external connection.
          ** NOTE TO SPECIFIER ** Delete colored drive lane lenses not required.
** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete fusing not required.
          t.Fusing: None.
          u.Fusing: Single Fusing 120 V, 277 V, 347 V.
          v.Fusing: Double Fusing 208 V, 240 V, 480 V.
          w.Fusing: Double Fusing 208 V, 240 V, 480 V, Canadian Double Pull.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          B.Parking and Under Canopy Lights: Quality LED Parking Gen-2 (QLP) as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          ** NOTE TO SPECIFIER ** Symmetric distribution configurations only. Delete if not required.
          b.Design Lights Consortium (DLC) Certified.
          ** NOTE TO SPECIFIER ** Standard unit is IP65 rated. Units with' PX10' and ' OC15' occupancy detectors are currently damp location only. Delete if not required.
          c.IP65 rating.
          2.Construction: Die-cast aluminum alloy construction, corrosion, contaminant resistant.
          3.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          4.Finish Color: Textured Satin Aluminum Standard; contact factory for custom colors.
          5.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          6.Optics: Employ LEDGINE technology.
          7.LED and Board Arrays: Cree XPG, minimum 122 lms/W.
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          8.Color Temperature: Standard, neutral white 4000 K +/- 250 K. CRI = 76
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          9.Fixture Configuration: As scheduled or indicated on Drawings.
          10.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for driver not required.
          a.Drivers: 530 mA; open/short circuit protection, 48 LEDs.
          b.Drivers: 700 mA; open/short circuit protection, 32 LEDs.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          c.Distribution: Asymmetric.
          d.Distribution: Symmetric.
          e.Distribution: Downlight.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          f.Mounting: Standard, Easy Hanger Plate, galvanized steel, with universal provisions for 4 inch (102 mm) junction boxes; external set screw allows the fixture to be locked or removed without fixture disassembly.
          g.Mounting: Bulk Pack Easy Hanger Plate.
          h.Mounting: Pendant mount with 24 inch (610 mm) leads.
          i.Mounting: Pendant mount to rigid conduit.
          j.Mounting: Through-wire provision.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          k.Voltage: 120 V.
          l.Voltage: 208 V.
          m.Voltage: 240 V.
          n.Voltage: 277 V.
          o.Voltage: 347 V.
          p.Voltage: 480 V.
          q.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete option for wire guard accessory if not required.
          r.Wire Guards: Provide optional wire guard.
          ** NOTE TO SPECIFIER ** Proximo occupancy detectors (PX10) only available in 120, 277, and 347 V configurations; provides added energy savings of up to 94 percent during unoccupied periods. Fixtures with Proximo work as ' Smart Fixtures.' Delete if not required.
          s.Motion Sensors: Provide optional PX10 Proximo occupancy detectors; field programmable dimming, 10 percent - 80 percent; includes dimming drivers.
          t.Wireless Control System: Web based system that operates through high density mesh wireless technology. Radio modules with motion and photocell sensors are incorporated into each luminaire to allow for remote communication.
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete fusing not required.
          u.Fusing: Single Fusing 120 V, 277 V, 347 V.
          v.Fusing: Double Fusing 208 V, 240 V, 480 V.
          w.Fusing: Double Fusing 208 V, 240 V, 480 V, Canadian Double Pull.
          ** NOTE TO SPECIFIER ** Delete bird shroud if not required.
          x.Bird Protection: Provide optional bird guard accessory.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.4WALL MOUNT LED LIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Wall Mount LED Lighting: AeroScape ASW-32 as manufactured by Philips Wide-Lite.
          1.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          a.Boards: RoHS compliant.
          b.Housings and Thermal Management Systems: IP 66.
          2.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          3.Housings: Die-cast aluminum housing; optic chamber and separate driver housing.
          4.Hardware: Corrosion resistant hardware.
          5.Heat Sinks: Die-cast aluminum heatsinks.
          6.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          7.Color Temperature: Neutral White 4000 K +/- 250 K.
          8.Boards: Metal core printed circuit board.
          9.Drivers: 350, 530, 700 mA; accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          10.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          11.Optical Systems: 32 Rebel ES LEDs employ LEDGINE technology and Rebel ES LEDs, fully gasketed Dust-Tite construction.
          12.Mounting: Surface mount standard, integral bubble mount; sealing housing to mounting surface. Can be mounted in an inverted position.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          13.Fixture Configuration: As scheduled or indicated on Drawings.
          14.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          a.Voltage: 120 V.
          b.Voltage: 208 V.
          c.Voltage: 240 V.
          d.Voltage: 277 V.
          e.Voltage: 347 V.
          f.Voltage: 480 V.
          g.Voltage: UNV, 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          h.Distribution: Type II.
          i.Distribution: Type III.
          j.Distribution: Type IV.
          k.Distribution: Wall Throw distribution.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          l.Mounting: Standard, surface mount.
          m.Mounting: Conduit through-wire mount.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          n.Fusing: Single Fusing (120, 277, 347 V).
          o.Fusing: Double Fusing (208, 240, 480 V).
          p.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          q.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          r.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          s.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          t.Dimming Drivers: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          u.Photocontrol Button: Provide optional photocell button
          v.Stone Guard: Provide optional field installed stone guard.
          w.Lenses: Provide optional diffuse lens.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          B.Wall Mount LED Lighting: AeroScape ASW-32 with Emergency Backup Battery (EBB) as manufactured by Philips Wide-Lite.
          1.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          a.Emergency Backup Battery: Listed to UL 924 standard.
          b.Boards: RoHS compliant.
          c.Housings and Thermal Management Systems: IP 66.
          2.Emergency Battery Backup (EBB): Provides 1 footcandle minimum path-of-egress illumination, from building up to 10 feet toward common way, will operate for 90 minutes and extinguish itself once power is fully recovered; 120 - 277V only, No heating element required.
          3.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          4.Housings: Die-cast aluminum housing; optic chamber and separate driver housing.
          5.Hardware: Corrosion resistant hardware.
          6.Heat Sinks: Die-cast aluminum heatsinks.
          7.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          8.Color Temperature: Neutral White 4000 K +/- 250 K.
          9.Boards: Metal core printed circuit board.
          10.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          11.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          12.Optical Systems: 32 Rebel ES LEDs employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          13.Mounting: Surface mount standard, integral bubble mount; sealing housing to mounting surface.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          14.Fixture Configuration: As scheduled or indicated on Drawings.
          15.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for drivers not required.
          a.Drivers: 350 mA.
          b.Drivers: 530 mA.
          c.Drivers: 700 mA.
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          d.Voltage: 120 V.
          e.Voltage: 208 V.
          f.Voltage: 240 V.
          g.Voltage: 277 V.
          h.Voltage: UNV, 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          i.Distribution: Type II.
          j.Distribution: Type III.
          k.Distribution: Type IV.
          l.Distribution: Wall Throw distribution.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          m.Mounting: Standard, surface mount.
          n.Mounting: Conduit through-wire mount.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          o.Fusing: Single Fusing (120, 277, 347 V).
          p.Fusing: Double Fusing (208, 240, 480 V).
          ** NOTE TO SPECIFIER ** Photocontrol button not available with 480 V configuration. Delete optional accessories below not required.
          q.Photocontrol Button: Provide optional photocell button
          r.Stone Guard: Provide optional field installed stone guard.
          s.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          t.Lenses: Provide optional diffuse lens.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          C.Wall Mount LED Lighting: AeroScape ASW-80 as manufactured by Philips Wide-Lite.
          1.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          a.Boards: RoHS compliant.
          b.Housings and Thermal Management Systems: IP 66.
          2.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          3.Housings: Die-cast aluminum housing; optic chamber and separate driver housing.
          4.Hardware: Corrosion resistant hardware.
          5.Heat Sinks: Die-cast aluminum heatsinks.
          6.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          7.Color Temperature: Neutral White 4000 K +/- 250 K.
          8.Boards: Metal core printed circuit board.
          9.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          10.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          11.Optical Systems: 80 Rebel ES LEDs employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          12.Mounting: Surface mount standard, integral bubble mount; sealing housing to mounting surface.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          13.Fixture Configuration: As scheduled or indicated on Drawings.
          14.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for drivers not required.
          a.Drivers: 530 mA.
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          b.Voltage: 120 V.
          c.Voltage: 208 V.
          d.Voltage: 240 V.
          e.Voltage: 277 V.
          f.Voltage: 347 V.
          g.Voltage: 480 V.
          h.Voltage: UNV, 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          i.Distribution: Type II.
          j.Distribution: Type III.
          k.Distribution: Type IV.
          l.Distribution: Wall Throw distribution.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          m.Mounting: Standard, surface mount.
          n.Mounting: Conduit through-wire mount.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          o.Fusing: Single Fusing (120, 277, 347V).
          p.Fusing: Double Fusing (208, 240, 480V).
          q.Fusing: Double Fusing (208, 240, 480V), Canadian Double Pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          r.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          s.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          t.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          u.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Photocontrol button not available with 480 V configuration. Delete optional accessories below not required.
          v.Photocontrol Button: Provide optional photocell button
          w.Stone Guard: Provide optional field installed stone guard.
          x.Lenses: Provide optional diffuse lens.
          ** NOTE TO SPECIFIER ** Applications: Ideal for Schools, Malls, Office Buildings, Industrial Parks, Hospitals, Sports Complexes, and Commercial Centers. Delete if not required.
 
          D.Wall Mount LED Lighting: GeoScapes Series LED as manufactured by Philips Wide-Lite.
          ** NOTE TO SPECIFIER ** Delete option for housing style not required.
          1.Housing Style: As scheduled or indicated on Drawings.
          2.Housing Style: GeoScapes 1
          3.Housing Style: GeoScapes 2
          4.Housing Style: GeoScapes 3.
          5.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          6.Finish: Polyester powder coating, 2.5 mil nominal thickness, electrostatically applied and oven cured.
          7.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          8.Housings: Heavy duty die cast aluminum housing.
          9.Heat Sinks: Integral cast aluminum heat sink.
          10.Lenses: Fully tempered soda lime glass lens.
          11.Drivers: Electronic class II LED drivers accept 120-277v, 50/60hz input, constant current.
          12.Optical System: High-output LEDs; individual precision optics collect, redirect light.
          13.Mounting: Pre-mountable wall box with integral splice chamber, no J-Box needed; Built-in bubble level for accuracy and hands-free fixture to wall positioning.
          14.Finish: Polyester powder coating, 2.5 mil nominal thickness, electrostatically applied and oven cured.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          15.Fixture Configuration: As scheduled or indicated on Drawings.
          16.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for drivers not required.
          a.Drivers: 08.
          b.Drivers: 06.
          ** NOTE TO SPECIFIER ** Delete options for optics not required.
          c.Optics: Type II.
          d.Optics: Type III.
          e.Voltage: U; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for color temperature not required.
          f.Color Temperature: Standard, 4000 K +/- 250K, 49 LEDs per unit.
          g.Color Temperature: Standard, 5700 K +/- 250K, 54 LEDs per unit.
          ** NOTE TO SPECIFIER ** Delete optional photocontrol if not required.
          h.Photocontrol: Provide optional PCB photocontrol button.
          ** NOTE TO SPECIFIER ** Delete optional surface collar accessory if not required.
          i.Collar: Provide optional surface collar accessory.
          ** NOTE TO SPECIFIER ** Applications: Accent, facade, parking, security, signage, and housing. Delete if not required.
 
          E.Wall Mount LED Lighting: Quality LED Wall Mount Small (QLW-7G1) Sconce as manufactured by Philips Wide-Lite.
          1.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          2.Housings: Heavy die cast aluminum, fully gasketed.
          3.Heat Sinks: Integral cast aluminum heat sink with integral splice chamber.
          4.Drivers: Electronic Class II LED drivers accept 120-220v, 50/60Hz input (constant current); require only 13 system watts.
          5.Optical System: Seven high-output LEDS.
          6.Distribution: Type III, shielded optics, no uplight, individual precision collimating optics.
          7.Lenses: Acrylic.
          8.Color Temperature: 4100 K, neutral white.
          9.Mounting: Universal mounting plate with hook and lock mounting with a built-in bubble level for accuracy.
          10.Finish: Corrosion resistant Duraplex II polyester powder coated finish.
          11.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          ** NOTE TO SPECIFIER ** Delete optional photocontrol if not required.
          12.Photocontrol: Provide optional PCB photocontrol button.
          ** NOTE TO SPECIFIER ** Applications: Accent, facade, , security, signage, and. Delete if not required.
 
          F.Wall Mount LED Lighting: Quality LED Wall Mount Small (QLW-16G1) Sconce as manufactured by Philips Wide-Lite.
          1.Compliance: ETL and cETL listed, per UL 1598, suitable for wet locations.
          2.Housings: Heavy die cast aluminum, fully gasketed.
          3.Heat Sinks: Integral cast aluminum heat sink with integral splice chamber.
          4.Drivers: Electronic Class II LED drivers accept 120-220v, 50/60Hz input (constant current); require only 13 system watts.
          5.Optical System: Sixteen high-output LEDS. Employs LEDGINE technology - Philips global LED-based optical system.
          6.Distribution: 16 LED unit: Type II, III, IV, or Wall Throw distribution. Meets IES Full Cutoff criteria.
          7.Lenses: Acrylic.
          8.Color Temperature: Neutral White 4000 K +/- 250K.
          9.Mounting: Universal mounting plate with hook and lock mounting with a built-in bubble level for accuracy.
          10.Finish: Corrosion resistant Duraplex II polyester powder coated finish.
          11.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          12.Fixture Configuration: As scheduled or indicated on Drawings.
          13.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          a.Drivers: 700 mA.
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          b.Voltage: 120 V.
          c.Voltage: 208 V.
          d.Voltage: 240 V.
          e.Voltage: 277 V.
          f.Voltage: UNV, 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          g.Distribution: Type II.
          h.Distribution: Type III.
          i.Distribution: Type IV.
          j.Distribution: Wall Throw distribution.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          k.Mounting: Standard, surface mount.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          l.Fusing: Single Fusing (120, 277, 347V).
          m.Fusing: Double Fusing (208, 240V).
          n.Fusing: Double Fusing (208, 240 V), Canadian Double Pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          o.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          p.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          q.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          r.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Photocontrol button not available with 480 V configuration. Delete optional accessories below not required.
          s.Photocontrol Button: Provide optional photocell button
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          G.Wall Mount LED Lighting: GeoMatrixx LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          ** NOTE TO SPECIFIER ** Delete if not required.
          a.Housing: IP54 rating.
          2.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          3.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          4.Housings: Die-cast aluminum alloy construction.
          5.Heat Sinks: Integral cast aluminum heat sink.
          6.Exposed Hardware: Stainless steel.
          7.Lens: Fully tempered soda lime glass lens,.
          8.Drivers: Electronic class II LED driver accepts 120-277v, 50/60hz input, constant current.
          9.Optical System: High-output LEDs, individual precision optics collect and redirect light.
          10.Mounting: The GeoMatrixx can be surface mounted in various positions. UL approved mounting box rated for 90 degree C supply wire with integral bubble level.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          11.Fixture Configuration: As scheduled or indicated on Drawings.
          12.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for drivers not required.
          a.Drivers: 08.
          b.Drivers: 06.
          ** NOTE TO SPECIFIER ** Delete options for optics not required.
          c.Optics: Type II.
          d.Optics: Type III.
          e.Mounting: 3/4 inch (19 mm) arm with serrated teeth lock arm mount unit into position for vertical adjustment.
          f.Voltage: U; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for color temperature not required.
          g.Color Temperature: Standard, 4000 K +/- 250K, 49 LEDs per unit.
          h.Color Temperature: Standard, 5700 K +/- 250K, 54 LEDs per unit.
          ** NOTE TO SPECIFIER ** Delete optional photocontrol if not required.
          i.Photocontrol: Provide optional P150F field installed multitap photocell..
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          2.5ARCHITECTURAL LED FLOODLIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Architectural Floodlighting: TAG Linear as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 and UL 8750 standard, suitable for Wet Locations.
          a.Boards: RoHS compliant.
          b.Fixture: IP66 rating.
          ** NOTE TO SPECIFIER ** Delete if not required.
          c.Driver: IP65 rating.
          ** NOTE TO SPECIFIER ** Delete sizes not required.
          2.Size: 12 LEDs.
          3.Size: 24 LEDs.
          4.Size: 36 LEDs.
          5.Size: 72 LEDs.
          6.Construction: Extruded aluminum alloy construction, with integrated heat sinks and machined end caps.
          7.Signal Repeater/Splitter: DMX Signal Repeater/Splitter.
          8.Driver Finish Color: Gray or Stainless Steel. Fixture Color: Anodized Satin Aluminum.
          9.Adjustment Mechanism: Lockable thumb screw aiming.
          10.Drivers:
          ** NOTE TO SPECIFIER ** Delete options for driver types not required.
          a.Driver Types: 24 VDC output, TAG-DR Series Indoor LED Driver Box, ordered separately from fixture; gray polyester powder coat finish on inside and out.
          b.Driver Types: 24 VDC output, TAG-DR Series Outdoor LED Driver Box, ordered separately from fixture; stainless steel with a brushed No. 4 finish
          c.Driver Types: 24 VDC output, as manufactured by others; ordered separately from fixture.
          ** NOTE TO SPECIFIER ** Delete options for wattages not required.
          d.Driver Wattage: 100.
          e.Driver Wattage: 150.
          f.Driver Wattage: 200.
          g.Driver Wattage: 300.
          ** NOTE TO SPECIFIER ** Delete options for voltages not required.
          h.Voltage: 120.
          i.Voltage: 208.
          j.Voltage: 240.
          k.Voltage: 277.
          ** NOTE TO SPECIFIER ** DMX option recommended for use with ColorDial or 3rd party DMX system. Delete optional features not required.
          l.Provide optional DMX Terminal Block;
          m.Provide optional through-wire provisions.
          n.Provide optional Single Fuse (120/277V).
          o.Provide optional Double Fuse (208/240V).
          p.Provide optional Photocell Button.
          q.Provide optional Tamper Proof Screws.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          11.Fixture Configuration: As scheduled or indicated on Drawings.
          12.Fixture Configuration:
          ** NOTE TO SPECIFIER ** One ' Master Unit' is required to control a run of ' Drone Units' using Color-Tune. DMX wires must be daisy chained in series (Level-2 control). Can control up to 80 units before requiring ' DMXSR' or additional ' Master Unit'. ' DMXSR' is a secondary DMX signal repeater/splitter and is required when more than 80 TAG RGB fixtures are controlled via DMX from a single DMX source (including ' Master Unit' and ' CLRD' control). ColorDial is a standalone lighting controller and interface for TAG light fixtures. The ColorDial is an easy to install, wall-mountable assembly ideal for applications that desire a variety of effects in an easy interface. ColorDial's ease-of-use design lets you select and modify a variety of lighting effects with a simple push and turn of a knob. ColorDial includes eight lighting effects that can be accessed and modified with a simple-to-use rotary/push dial - no programming required. Push the dial to select Fixed Color, Color Wash, three Chasing Rainbow settings, Random Color, Random Fade, White Light, or off. Rotate the dial to adjust the color or speed, depending on the effect. ColorDial comes ready to mount into a standard U.S. single or multi gang wall box using a standard face plate. It is designed for power and data connections to be hardwired to the internal five-position terminal block. Switches are provided to disable/enable effects prior to installation. Delete options for colors not required.
          a.LED Color: Red Green Blue Drone Unit, with Color-Tune technology.
          1)Wiring: 10 feet of 7-wire multimedia cable standard with floating male/female terminals.
          2)Controller: ColorDial DMX Controller.
          b.LED Color: Red Green Blue Master Unit, with Color-Tune technology.
          1)Wiring: 10 feet of 7-wire multimedia cable standard with floating male/female terminals.
          2)Controller: ColorDial DMX Controller.
          c.LED Color: Neutral White 4000K +/- 250K; CRI of 70 +/- 3.
          1)Wiring: 10 feet of S/O cord standard.
          d.LED Color: Cool White 5700K +/- 250K; CRI of 70 +/- 3.
          1)Wiring: 10 feet of S/O cord standard.
          e.Voltage: 24 V DC.
          ** NOTE TO SPECIFIER ** Delete options for control systems not required.
          1)Control System: Level 1. Color Tune Control - Push-Button on each fixture
          f.Control System: Level 2. Color Tune Control - Up to 32 fixtures from 1 location
          g.Control System: Level 3. ColorDial - Control up to 60 fixtures with wall mounted controller
          h.Control System: Level 4.- Control with most off the shelf DMX controllers
          ** NOTE TO SPECIFIER ** Field or factory DMX addressing is required for use with ' CLRD' ColorDial's chasing rainbow effects. Can only accept addresses, 1 to 60. Delete options for addressing not required.
          i.Addressing: Sequential factory DMX addressing.
          j.Addressing: Custom factory DMX addressing.
          k.Addressing: Field addressing.
          ** NOTE TO SPECIFIER ** Delete options for handheld programmer not required.
          l.Handheld Programmer: For field set master and drones and Field DMX channel addressing.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          m.Distribution: 9 degree spot.
          n.Distribution: 12 degree spot.
          o.Distribution: 18 degree flood.
          p.Distribution: 30 degree flood.
          q.Distribution: 70 degree flood.
          ** NOTE TO SPECIFIER ** Delete options for mounting accessories not required.
          r.Mounting Accessories: Provide optional Short Straight Arm, 8 inches (203 mm) with textured satin aluminum finish.
          s.Mounting Accessories: Provide optional Long Straight Arm 24 inches (610 mm) with textured satin aluminum finish.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          t.Mounting: None required.
          u.Mounting: Bracket arm, stainless steel.
          ** NOTE TO SPECIFIER ** Delete options for shielding not required.
          v.Shielding: Provide optional factory attached Stone Guard polycarbonate shielding; compatible with ' TS' top shield and ' FS' full snoot accessories.
          w.Shielding: Provide optional Top Shields glare shield accessories for field attachment.
          x.Shielding: Provide optional stone guard accessories for field attachment.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          B.Architectural Floodlighting: TAG RD Round as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 and UL 8750 standard, suitable for Wet Locations.
          a.Boards: RoHS compliant.
          b.Fixture: IP66 rating.
          ** NOTE TO SPECIFIER ** Delete if not required.
          c.Driver: IP65 rating.
          ** NOTE TO SPECIFIER ** Delete options for sizes not required.
          2.Size: As scheduled or indicated on Drawings.
          3.Size: Small, 6 LEDs.
          4.Size: Medium, 30 LEDs.
          5.Construction: Die-cast aluminum alloy construction, with integrated heat sinks.
          6.Signal Repeater/Splitter: DMX Signal Repeater/Splitter.
          7.Finish: Powder coating, 2.5 mil nominal thickness, electrostatically applied and oven cured.
          8.Finish Color: Textured Gray Standard.
          9.Adjustment Mechanism: Lockable thumb screw aiming.
          10.Drivers:
          ** NOTE TO SPECIFIER ** Delete options for driver types not required.
          a.Driver Types: 24 VDC output, TAG-DR Series Indoor LED Driver Box, ordered separately from fixture; gray ANSI 61 polyester powder coat finish on inside and out.
          b.Driver Types: 24 VDC output, TAG-DR Series Outdoor LED Driver Box, ordered separately from fixture; stainless steel with a brushed No. 4 finish
          c.Driver Types: 24 VDC output, as manufactured by others; ordered separately from fixture.
          ** NOTE TO SPECIFIER ** Delete options for wattages not required.
          d.Wattage: 100.
          e.Wattage: 150.
          f.Wattage: 200.
          g.Wattage: 300.
          ** NOTE TO SPECIFIER ** Delete options for voltages not required.
          h.Voltage: 120.
          i.Voltage: 208.
          j.Voltage: 240.
          k.Voltage: 277.
          ** NOTE TO SPECIFIER ** DMX option recommended for use with ColorDial or 3rd party DMX system. Delete optional features not required.
          l.Provide optional DMX Terminal Block;
          m.Provide optional through-wire provisions.
          n.Provide optional Single Fuse (120/277V).
          o.Provide optional Double Fuse (208/240V).
          p.Provide optional Photocell Button.
          q.Provide optional Tamper Proof Screws.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          11.Fixture Configuration: As scheduled or indicated on Drawings.
          12.Fixture Configuration:
          ** NOTE TO SPECIFIER ** One ' Master Unit' is required to control a run of ' Drone Units' using Color-Tune. DMX wires must be daisy chained in series (Level-2 control). Can control up to 80 units before requiring ' DMXSR' or additional ' Master Unit'. ' DMXSR' is a secondary DMX signal repeater/splitter and is required when more than 80 TAG RGB fixtures are controlled via DMX from a single DMX source (including ' Master Unit' and ' CLRD' control). ColorDial is a standalone lighting controller and interface for TAG light fixtures. The ColorDial is an easy to install, wall-mountable assembly ideal for applications that desire a variety of effects in an easy interface. ColorDial's ease-of-use design lets you select and modify a variety of lighting effects with a simple push and turn of a knob. ColorDial includes eight lighting effects that can be accessed and modified with a simple-to-use rotary/push dial - no programming required. Push the dial to select Fixed Color, Color Wash, three Chasing Rainbow settings, Random Color, Random Fade, White Light, or off. Rotate the dial to adjust the color or speed, depending on the effect. ColorDial comes ready to mount into a standard U.S. single or multi gang wall box using a standard face plate. It is designed for power and data connections to be hardwired to the internal five-position terminal block. Switches are provided to disable/enable effects prior to installation. Delete options for colors not required.
          a.LED Color: Red Green Blue Drone Unit, with Color-Tune technology.
          1)Wiring: 10 feet of 7-wire multimedia cable standard with floating male/female terminals.
          2)Controller: ColorDial DMX Controller.
          b.LED Color: Red Green Blue Master Unit, with Color-Tune technology.
          1)Wiring: 10 feet of 7-wire multimedia cable standard with floating male/female terminals.
          2)Controller: ColorDial DMX Controller.
          c.LED Color: Neutral White 4000K +/- 250K; CRI of 70 +/- 3.
          1)Wiring: 10 feet of S/O cord standard.
          d.LED Color: Cool White 5700K +/- 250K; CRI of 70 +/- 3.
          1)Wiring: 10 feet of S/O cord standard.
          e.Voltage: 24 V DC.
          ** NOTE TO SPECIFIER ** Delete options for control systems not required.
          f.Control System: Level 1.Color Tune Control - Push-Button on each fixture.
          g.Control System: Level 2. Color Tune Control - Up to 32 fixtures from 1 location.
          h.Control System: Level 3. ColorDial - Control up to 60 fixtures with wall mounted controller.
          i.Control System: Level 4.- Control with most off the shelf DMX controllers.
          ** NOTE TO SPECIFIER ** Field or factory DMX addressing is required for use with ' CLRD' ColorDial's chasing rainbow effects. Can only accept addresses, 1 to 60. Delete options for addressing not required.
          j.Addressing: Sequential factory DMX addressing.
          k.Addressing: Custom factory DMX addressing.
          l.Addressing: Field addressing.
          ** NOTE TO SPECIFIER ** Delete options for handheld programmer not required.
          m.Handheld Programmer: For field set master and drones.
          n.Handheld Programmer: Field DMX channel addressing.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          o.Distribution: 9 degree spot.
          p.Distribution: 12 degree spot.
          q.Distribution: 18 degree flood.
          r.Distribution: 30 degree flood.
          s.Distribution: 70 degree flood.
          ** NOTE TO SPECIFIER ** Delete options for mounting accessories not required.
          t.Mounting Accessories: Provide optional 8 inch (203 mm) Stanchion Mount.
          u.Mounting Accessories: Provide optional Slip Fitter, fits 2-3/8 inch (60 mm) tenon.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          v.Mounting: Yoke only.
          w.Mounting: Surface mount J-box.
          x.Mounting: Universal mount.
          ** NOTE TO SPECIFIER ** Delete options for shielding not required.
          y.Shielding: Provide optional factory attached Stone Guard polycarbonate shielding; compatible with ' TS' top shield and ' FS' full snoot accessories.
          z.Shielding: Provide optional Top Shields glare shield accessories for field attachment.
          aa.Shielding: Provide optional Full Snoot glare shield accessories for field attachment.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          C.Architectural Floodlighting: Quality LED Floodlighting Series (QLF) as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 66 rating.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: 32 G1 Rebel ES LEDs, 530 mA.
          3.Optical System: 32 G1 Rebel ES LEDs, 700 mA.
          4.Optical System: 80 G1 Rebel ES LEDs, 350 mA.
          5.Optical System: 80 G1 Rebel ES LEDs, 530 mA.
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          6.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          7.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          8.Housings: Die-cast aluminum housing, 22 inch (560 mm) optical opening; optic chamber and separate driver housing constructed to IP66.
          9.Hardware: Corrosion resistant hardware.
          10.Heat Sinks: Die-cast aluminum heatsinks.
          11.Thermal Management: Creates a vortex of airflow with passthrough convective cooling system and heat extraction.
          12.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 60.
          13.Boards: Metal core printed circuit board.
          14.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          15.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          16.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          17.Fixture Configuration: As scheduled or indicated on Drawings.
          18.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting configuration not required.
          a.Mounting: Die Cast mastfitter mount.
          ** Mounting Accessory: Provide optional
          b.Mounting Accessory: Provide optional Pole Top adapter.
          c.Mounting Accessory: Wall Mount Bracket
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          d.Distribution: Spot.
          e.Distribution: Narrow Beam Flood
          f.Distribution: Medium Beam Flood
          g.Distribution: Wide Beam Flood #1
          h.Distribution: Wide Beam Flood #2
          i.Distribution: Horizontal Beam Flood
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          j.Voltage: 120 V.
          k.Voltage: 208 V.
          l.Voltage: 240 V.
          m.Voltage: 277 V.
          n.Voltage: 347 V.
          o.Voltage: 480 V.
          p.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          q.Fusing: Single Fusing (120, 277, 347 V).
          r.Fusing: Double Fusing (208, 240, 480 V).
          s.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          t.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          u.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          v.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          w.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          x.Provide optional photocontrol button.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          D.Architectural Floodlighting: Universal Flood UF3 medium LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          2.Construction: Die-cast aluminum alloy construction, corrosion, contaminant resistant.
          3.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          4.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          5.Body Construction: Precision die-cast aluminum construction body.
          6.Lens: Tempered glass lens.
          7.Lens Frame: Cast aluminum lens frame with heat sinks.
          8.Lens Screws: Captive stainless steel screws.
          9.Gasket: Extruded silicone gasket.
          10.Drivers: Accept 120-277 V, 50/60 Hz input, with 10 kV surge protector standard.
          11.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          12.Optics: 49 high-output LEDs, individual precision optics collect and redirect light.
          13.LED and Board Arrays: 30 Cree XPG LEDs per unit, minimum 122 lms/W.
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          14.Color Temperature: Standard, neutral white 4000 K +/- 250K.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          15.Fixture Configuration: As scheduled or indicated on Drawings.
          16.Fixture Configuration:
          a.Wattage: 102 W.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          b.Distribution: 2x2 luminaire with clear prismatic plastic optics.
          c.Distribution: 4x4 luminaire with clear prismatic plastic optics.
          d.Distribution: 5x5 luminaire with clear prismatic plastic optics.
          e.Distribution: 3x5 luminaire with clear prismatic plastic optics.
          f.Distribution: 5x3 luminaire with clear prismatic plastic optics.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          g.Mounting: Trunnion.
          h.Mounting: 2-3/8 inch (60 mm) tenon slipfitter, with splice box in mounting arm.
          i.Mounting: Wall mount bracket with tenon.
          j.Voltage: U; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for accessories if not required.
          k.Replacement Slipfitter: Provide optional replacement slipfitter.
          l.Replacement Yoke: Provide optional replacement yoke.
          ** NOTE TO SPECIFIER ** Applications: Security, accent, facade, recreational, fields, signage lighting, landscape lighting. Delete if not required.
 
          E.Architectural Floodlighting: Universal Flood UF2 small LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          2.Construction: Die-cast aluminum alloy construction, corrosion, contaminant resistant.
          3.Finish: Polyester powder coat, electrostatically applied, preceded by five step pre-treatment process including an iron phosphate priming stage; meets or exceeds ASTM testing requirements, including 1,000 hour salt spray endurance testing.
          4.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          5.Body Construction: Precision die-cast aluminum construction body.
          6.Lens: Tempered glass lens.
          7.Lens Frame: Cast aluminum lens frame with heat sinks.
          8.Lens Screws: Captive stainless steel screws.
          9.Gasket: Extruded silicone gasket.
          10.Drivers: Accept 120-277 V, 50/60 Hz input, with 10 kV surge protector standard.
          11.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          12.Optics: 30 high-output LEDs, individual precision optics collect and redirect light.
          13.LED and Board Arrays: 30 Cree XPG LEDs per unit, minimum 122 lms/W.
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          14.Color Temperature: Standard, neutral white 4000 K.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          15.Fixture Configuration: As scheduled or indicated on Drawings.
          16.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for wattage not required.
          a.Wattage: 43 W.
          b.Wattage: 63 W.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          c.Distribution: 2x2 luminaire with clear prismatic plastic optics.
          d.Distribution: 4x4 luminaire with clear prismatic plastic optics.
          e.Distribution: 5x5 luminaire with clear prismatic plastic optics.
          f.Distribution: 3x5 luminaire with clear prismatic plastic optics.
          g.Distribution: 5x3 luminaire with clear prismatic plastic optics.
          h.Mounting: 3/4 inch (19 mm) arm with serrated teeth lock arm mount unit into position for vertical adjustment.
          i.Voltage: U; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for adapters not required.
          j.Adapters: 2 inch (51 mm) Slipfitter adapters.
          k.Adapters: 3 inch (76 mm) Slipfitter adapters.
          ** NOTE TO SPECIFIER ** Applications: Gas Station Canopies, Convenience Stores. Maintenance Facilities Delete if not required.
 
          2.6GAS STATION LED LIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Gas Station LED Lighting: Mini 300 Gen-2 LED as manufactured by Philips Wide-Lite.
          1.Compliance: ETL/cETL listed to the UL 1598 standard, suitable for Wet Locations.
          a.Drivers: RoHS compliant.
          b.Design Lights Consortium (DLC) Certified.
          c.Housing: IP 65 rating (Single Skin and Surface Mount Units).
          ** NOTE TO SPECIFIER ** Delete options for optical systems not required.
          2.Optical System: As scheduled or indicated on Drawings.
          3.Optical System: 32 G1 Rebel ES LEDs, 700 mA.
          4.Optical System: 48 G1 Rebel ES LEDs, 700 mA.
          5.Finish Color: As selected from standard Philips Wide-Lite colors; contact factory for custom colors.
          a.Housings: Integrated die cast aluminum heat management system for
          b.maximum heat dissipation and exposure to outside air flow
          c.resulting in cooling of electronics and long life. LED's are protected by a tempered flat glass lens
          6.Hardware: Corrosion resistant hardware.
          7.Heat Sinks: Die-cast aluminum heatsinks.
          8.Color Temperature: Neutral White 4000 K +/- 250 K; CRI greater than or equal to 65. Cool White 5700K, CRI = 70.
          9.Boards: Metal core printed circuit board.
          10.Drivers: Accepts 120-277 V, 50/60 Hz input, with open/short circuit, 10 kV surge protection standard.
          11.Surge Protection: Standard, in accordance with IEEE / ANSI C62.41.2 guidelines; surge current rating of 10,000 amps.
          12.Optical Systems: Employ LEDGINE technology and Rebel ES LEDs; fully gasketed Dust-Tite construction.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          13.Fixture Configuration: As scheduled or indicated on Drawings.
          14.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          a.Mounting: Single Skin mount.
          b.Mounting: Double Skin mount.
          c.Mounting: Surface mount.
          d.Mounting: Retrofit Kit #1
          e.Mounting Accessory: Retrofit Kit #2.
          f.Mounting Accessory: Retrofit Kit #3.
          ** NOTE TO SPECIFIER ** Delete options for distribution not required.
          g.Distribution: Symmetrical
          h.Distribution: Asymmetrical
          i.Distribution: Symmetrical Shine
          j.Distribution: Asymmetrical Shine
          ** NOTE TO SPECIFIER ** Fusing not available with ' UNV' option. Delete voltages not required.
          k.Voltage: 120 V.
          l.Voltage: 208 V.
          m.Voltage: 240 V.
          n.Voltage: 277 V.
          o.Voltage: 347 V.
          p.Voltage: 480 V.
          q.Voltage: UNV; 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete options for fusing not required.
          r.Fusing: Single Fusing (120, 277, 347 V).
          s.Fusing: Double Fusing (208, 240, 480 V).
          t.Fusing: Double Fusing (208, 240, 480 V), Canadian double pull.
          ** NOTE TO SPECIFIER ** Dynadimmer not available in 347 or 480 V configurations. Dynadimmer can be modified later by the end-user with optional USB cable and free programming software. Delete options for dimming drivers not required.
          u.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          ** NOTE TO SPECIFIER ** This mode focuses on safety by dimming during a limited period of time. Decreases light levels to 25, 50, or 75 percent low during a four hour period.
          v.Dimming System: Dynadimmer - Safety Profile.
          ** NOTE TO SPECIFIER ** This mode provides an ideal balance between illumination and energy savings. Decreases light levels to 25, 50, or 75 percent low during a six hour period
          w.Dimming System: Dynadimmer - Median Profile.
          ** NOTE TO SPECIFIER ** This mode maximizes energy savings by dimming during a longer period of time. Decreases light levels to 25, 50, or 75 percent low during an eight hour period
          x.Dimming System: Dynadimmer - Economy Profile.
          ** NOTE TO SPECIFIER ** Delete optional accessories below not required.
          y.Environmental Protection Cover
          ** NOTE TO SPECIFIER ** Applications: Wide variety of high ceiling applications; including large retail, home centers, cold storage, manufacturing, warehousing, and gymnasiums. Delete if not required.
 
          2.7INDUSTRIAL LED LIGHTING
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          A.Two-Pod Industrial Luminaires: BL2 BayLyter LED as manufactured by Philips Wide-Lite.
          1.Compliance:
          a.Drivers: RoHS compliant.
          ** NOTE TO SPECIFIER ** 700 mA configurations only. Delete if not required.
          b.Design Lights Consortium (DLC) Certified.
          ** NOTE TO SPECIFIER ** The following are not available for all configurations. Delete if not required.
          c.IP65 rating (optional with cable mounting only).
          d.ETL approved for damp locations.
          2.Design: Low profile design, die-cast aluminum heat sinks, field-replaceable drivers; LEDs with individual optical lenses.
          ** NOTE TO SPECIFIER ** Delete options for finish not required.
          3.Finish: Standard, textured white corrosion resistant polyester powder finish.
          4.Finish: Textured black corrosion resistant polyester powder finish.
          5.Finish: Titanium gray corrosion resistant polyester powder finish.
          6.LED Pods and Driver Housings: Precision die-cast aluminum.
          7.Optics: Employ LEDGINE technology.
          a.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          8.Gasket: Molded silicone gasket seals optical compartment.
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          9.Color Temperature: Standard, neutral white.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          10.Fixture Configuration: As scheduled or indicated on Drawings.
          11.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for engine designator not required.
          a.Type: High-bay units.
          b.Type: Low-bay units.
          ** NOTE TO SPECIFIER ** Delete options for LEDs per pod not required.
          c.LEDs Per Pod: 48.
          d.LEDs Per Pod: 32.
          ** NOTE TO SPECIFIER ** Delete options for engine designator not required.
          e.Engine Designator: 73W at 350 mA.
          f.Engine Designator: 110W at 530 mA.
          g.Engine Designator: 144W at 700 mA.
          h.Engine Designator: 105W at 350 mA.
          ** NOTE TO SPECIFIER ** Delete options for optics not required.
          i.Optics: Aisle.
          j.Optics: Medium.
          k.Optics: Narrow.
          l.Optics: Wide; for lowbay fixtures.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          m.Mounting: 3/4 inch pendant stems.
          n.Mounting: Aircraft cabling.
          o.Mounting: Hooks.
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          p.Voltage: 120 V.
          q.Voltage: 208 V.
          r.Voltage: 240 V.
          s.Voltage: 277 V.
          t.Voltage: 480 V.
          u.Voltage: 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete option for wire guard accessory if not required.
          v.Wire Guards: Provide optional wire guard field installed accessories.
          ** NOTE TO SPECIFIER ** Delete option for fusing not required.
          w.Fusing: Single fuse.
          x.Fusing: Double fuse.
          ** NOTE TO SPECIFIER ** Not all cords are compliant with IP65 rating and wet location listing. Delete option for wire guard accessory if not required.
          y.Cords/Plugs: ______.
          ** NOTE TO SPECIFIER ** Delete emergency lampholders if not required.
          z.Emergency Lampholders: Provide emergency lampholders, lamps by others.
          ** NOTE TO SPECIFIER ** Delete options for motions sensors not required.
          aa.Motion Sensors: 360 degree motion sensor with Control 0 - 10V.
          ab.Motion Sensors: 360 degree motion sensor with adjustable day lighting control.
          ** NOTE TO SPECIFIER ** Delete options for lens not required.
          ac.Lens: Standard, tempered glass lens.
          ad.Lens: Diffuse lens.
          ** NOTE TO SPECIFIER ** Delete if not required.
 
          B.Four-Pod Industrial Luminaires: BL4 BayLyter LED as manufactured by Philips Wide-Lite.
          1.Compliance: Drivers are RoHS compliant.
          a.Drivers: RoHS compliant.
          ** NOTE TO SPECIFIER ** 700 mA configurations only. Delete if not required.
          b.Design Lights Consortium (DLC) Certified.
          ** NOTE TO SPECIFIER ** The following are not available for all configurations. IP65 rating available with cable mounting only. Delete if not required.
          c.IP65 rating (optional with cable mounting only)..
          d.ETL approved for damp locations.
          2.Design: Low profile design, computer designed heat sinks, field-replaceable drivers; LEDs include individual optical lenses.
          ** NOTE TO SPECIFIER ** Delete options for finish not required.
          3.Finish: As scheduled or indicated on Drawings.
          4.Finish: Standard, textured white corrosion resistant polyester powder finish.
          5.Finish: Textured black corrosion resistant polyester powder finish.
          6.Finish: Titanium gray corrosion resistant polyester powder finish.
          7.LED Pods and Driver Housings: Precision die-cast aluminum.
          8.Optics: Employ LEDGINE technology.
          a.Dimming Drivers: Provide optional dimming drivers, 0-10V, continuous dimming down to 10 percent power.
          9.Gasket: Molded silicone gasket seals optical compartment.
          ** NOTE TO SPECIFIER ** Fill in blank below or delete line as applicable. Contact factory for additional color temperature options. Delete options for color temperature not required.
          10.Color Temperature: Standard, neutral white.
          ** NOTE TO SPECIFIER ** Delete option for fixture configuration not required.
          11.Fixture Configuration: As scheduled or indicated on Drawings.
          12.Fixture Configuration:
          ** NOTE TO SPECIFIER ** Delete options for engine designator not required.
          a.Type: High-bay units.
          b.Type: Low-bay units.
          ** NOTE TO SPECIFIER ** Delete options for LEDs per pod not required.
          c.LEDs Per Pod: 48.
          d.LEDs Per Pod: 32.
          ** NOTE TO SPECIFIER ** Delete options for engine designator not required.
          e.Engine Designator: 146W at 350 mA.
          f.Engine Designator: 220W at 530 mA.
          g.Engine Designator: 288W at 700 mA.
          h.Engine Designator: 210W at 350 mA.
          ** NOTE TO SPECIFIER ** Delete options for optics not required.
          i.Optics: Aisle.
          j.Optics: Medium.
          k.Optics: Narrow.
          l.Optics: Wide; for lowbay fixtures.
          ** NOTE TO SPECIFIER ** Delete options for mounting not required.
          m.Mounting: 3/4 inch pendant stems.
          n.Mounting: Aircraft cabling.
          o.Mounting: Hooks.
          ** NOTE TO SPECIFIER ** Delete options for voltage not required.
          p.Voltage: 120 V.
          q.Voltage: 208 V.
          r.Voltage: 240 V.
          s.Voltage: 277 V.
          t.Voltage: 480 V.
          u.Voltage: 120 V - 277 V.
          ** NOTE TO SPECIFIER ** Delete option for wire guard accessory if not required.
          v.Wire Guards: Provide optional wire guard accessory.
          ** NOTE TO SPECIFIER ** Delete option for fusing not required.
          w.Fusing: Single fuse.
          x.Fusing: Double fuse.
          ** NOTE TO SPECIFIER ** Not all cords are compliant with IP65 rating and wet location listing. Delete option for wire guard accessory if not required.
          y.Cords/Plugs: ______.
          ** NOTE TO SPECIFIER ** Delete emergency lampholders if not required.
          z.Emergency Lampholders: Provide emergency lampholders, lamps by others.
          ** NOTE TO SPECIFIER ** Delete options for motions sensors not required.
          aa.Motion Sensors: 360 degree motion sensor with Control 0 - 10V.
          ab.Motion Sensors: 360 degree motion sensor with adjustable day lighting control.
          ** NOTE TO SPECIFIER ** Delete options for lens not required.
          ac.Lens: Standard, tempered glass lens.
          ad.Lens: Diffuse lens.
 
          PART 3EXECUTION
 
          3.1EXAMINATION AND PREPARATION
 
          A.Prepare substrates using the methods recommended by the manufacturer for achieving best result for the substrates under project conditions.
 
          B.Do not proceed with installation until substrates have been prepared using the methods recommended by the manufacturer and deviations from manufacturer's recommended tolerances are corrected. Commencement of installation constitutes acceptance of conditions.
 
          C.If preparation is the responsibility of another installer, notify Architect in writing of deviations from manufacturer's recommended installation tolerances and conditions.
 
          3.2INSTALLATION
 
          A.Install products in accordance with manufacturer's instructions.
 
          3.3PROTECTION
 
          A.Touch-up, repair or replace damaged products before Substantial Completion.
 
          B.Protect installed products and finishes from damage during construction.
 
         
END OF SECTION