Cable Handrail Assemblies, Handrail and Trellis Systems and Rigging

Our AP1-2000 is a cost effective solution to an all stainless steel railing system. This system uses an aluminum powder coated frame and stainless steel cables for the infill. The vertical post are manufactured from 2 3/8" square post spaced at 4'-0" O.C. and the top cap is a 2" x 3 3/4" oval. This system is available in both 36" high or 42" high railing. The cable infill system is a 1/8" diameter 1x19 cable with a swage stud adjuster at each end for tensioning. Attachment options include either a 5"x 5" surface mounted base plate, core drill or fascia mount Standard finish is powder coat available in a variety of colors

Our FB1-2000 handrail system is an all stainless steel design that consist of vertical post every 4'-0" o.c. The post are manufactured from (2) 1/2" x 1 1/2" flat bars and then connected to each other by a welded tube that is 1/2" in diameter and 1 1/2" inches long. The top cap is manufactured form 1 1/2" diameter tubing. This system is available in both 36" high or 42" high railing. The cable infill system is a 3/16" diameter 1x19 cable with stud adjusters at each end for tensioning Attachment options include either a 4"x4" surface mounted base plate, core drill or fascia mount Available in type 304 and 316 stainless steel Standard finish is a #3 brushed

Our VC1-2000 handrail system is an all stainless steel vertical cable railing system. The vertical post are manufactured from 3/4" x 2" flat bar and the horizontal members are manufactured from a 1 1/2" square tube. The top cap is manufactured from a 2" diameter tube. This system is available in both 36" high or 42" high railing. The cable infill system is a 1/8" diameter 1x19 cable with a decorative button head fitting at the upper end and a stud adjuster at the lower end for tensioning. Attachment options include either a 4"x4" surface mounted base plate, core drill or fascia mount Available in type 304 and 316 stainless steel Standard finish is a #3 brushed

For over a decade Seco South has been the leader in cable handrail systems These unique systems offer the designer a whole new approach to interior and exterior railing design capabilities. Our cable railing systems are used on commercial and residential projects all over the world. The incredible transparency as well as the extremely low maintenance is what set these systems apart from other obtrusive and high maintenance railing systems

Our handrail systems satisfy existing code requirements for use nationwide for horizontal or vertical handrail designs.

This is a welded railing frame system designed for bolt in or core drilled applications. The vertical balusters are made of 3/8" x 1 1/2" stainless steel flat bar and the horizontal component of the system is a 1 1/2" u-channel. The handrail is a 1 1/2" diameter stainless steel. A #320 non-directional satin finish is standard but other finishes as well as powder coating are also available.