Aluminum and Stainless Steel Mounting Hardware
CONTACT INFO
891 Trademark Dr.
Reno, NV 89521
Phone: 775-829-7272
Fax: 775-201-7200
CONTENT
VIDEOS
CATALOGS
GREEN DATACOMPANY OVERVIEW
Manufacturer of aluminum and stainless steel mounting hardware for signage, artwork, exhibits, displays and interiors. Made in the USA.
Choose from a large selection of StandOff, wire and rod systems. Most orders ship within 24 hours and design support can be reached online at standoffsystems.com or over the phone at 775-829-7272. Custom colors and sizes are available through an in-house custom shop. Made in the USA.
ALL PRODUCTS
{{this.show}} {{this.hide}} New Products
Structurelite C- Channel
Structurelite C- Channel Extrusion is supplied in standard sized 1.25" wide x 2.125" high x 100" long 6063-T5 aluminum bars that are clear anodized. The 1.75" x 0.556" slot is centered to hold .375" material using the C-Channel installation Kit (SL-CHNLKIT). *Additional packaging fee will apply for lengths over 34".
Structurelite Spider Mounts
The Gyford Spider Mount is available in two and four hole versions. Made of hardened steel and powder coated grey. The connections points are tapped to accept 5/16-18™ threads. These mounts are used for connecting decorative panels to StructureLite Extrusion such as H-Tube to create partitions and divider walls.
Structurelite Baffle Fin Hardware
This .375 x .47.75" aluminum bar is cut, drilled, and tapped with 9 holes to accept 1/4-20 HD-S10 cup point socket screws (included). Use this bar in conjunction with Gyford extrusion to create fin or baffle installs.
H-Tube Extrusion
Our 2-1/2" diameter, clear anodized aluminum Htube Extrusion has 1/4" walls and comes in 8" lengths. One end is drilled to accommodate three button head screws for attachment to the SL-A2.5BM mount. More than four (4) cuts will incur additional fee(s). Remnants will be recycled unless specified below. Selecting to ship the remnants will add additional shipping charges. Profile over 36" will incur additional shipping fees. Additional lead time is required for all cuts. Please indicate the length, number of cuts you want and the desired cut length (inches) for each piece
BLOX 3 Slot Extrusion Profile
This 1.25" square extruded three slot extrusion profile has a clear satin finish. Standard in 148™ lengths with up to four (4) cuts at no charge. More cuts will incur additional fee(s). Remnants will be recycled unless specified at time of order, and selecting to ship remnants will cause additional shipping charges. Profile longer than 36" will incur additional shipping fees. Additional lead time is required for all cuts. Please indicate the length, number of cuts you want and the desired cut length (inches) for each piece. For custom lengths and colors/finishes, speak with one of our Customer Solutions Specialists.
{{this.show}} {{this.hide}} New StructureLite Blox
StructureLite Blox
StructureLite ™Blox™ is our name for a specialized collection of StructureLite components designed to work with square extrusion. The Blox line includes square extrusion, hub and corner connectors, feet and covers for square profile. These components are also compatible with our other product lines.
StructureLite Blox Corner
This 1.25″ clear anodized cubed corner junction is used to connect 1.25″ square profile on four sides of the cube via (3) three capstans and (4) four cone head set screws. The two outer faces of the cube are smooth. Primarily used for creating square or rectangle structures such as a display case, shelving unit or exhibit platform.
StructureLite Blox Hub
The StructureLite Blox Hub Connector for Square Profile is a 2″ square x 1.25″ deep hub connector with 45 degree beveled corners. It uses four capstans and set screws to extend square profile in four directions. Additionally, a 1.25″ square profile may be passed through the center. This hub connector may also be used to transition from square profile to round profile.
StructureLite Square Mounting Plate w/Hardware
The SL Square Mounting Plate with Counterbore thru-hole and hardware is a 2-1/2″ wide mounting plate, counter-bored with a 5/16″ thru-hole for attachment to other parts with a low head screw. Mounting hardware is included.
StructureLite Square Mounting Plate with Counterbore thru-hole
The SL Square Mounting Plate with Counterbore thru-hole is a 2-1/2″ wide mounting plate, counter-bored with a 5/16″ thru-hole for attachment to other parts with a low head screw. Mounting hardware is included.
StructureLite Rigid Plastic Spline
StructureLite Rigid Plastic Spline is designed to secure 1/4″ material in slotted profile and protect it from the profile™s metal edges. It is available in 8′ lengths.
StructureLite Plastic Flexible Spline
StructureLite Plastic Flexible Spline is designed to accommodate material 1/4″ thick and protect it from the profile™s metal edges. It is sold by the foot and can be cut to length.
StructureLite Square 180 Degree Two Slot Profile
This 1.25″ square extruded 180 degree two-slot profile has a clear satin finish. Standard in 100″ lengths with up to four (4) cuts at no charge. More cuts will incur additional fee(s). Remnants will be recycled unless specified at time of order, and selecting to ship remnants will cause additional shipping charges. Profile longer than 36″ will incur additional shipping fees. Additional lead time is required for all cuts. Please indicate the length, number of cuts you want and the desired cut length (inches) for each piece. For custom lengths and colors/finishes, speak with one of our Customer Solutions Specialists.
StructureLite Square 90 Degree Two Slot Profile
This 1.25″ square extruded 90 degree two slot profile has a clear satin finish. Standard in 100™ lengths with up to four (4) cuts at no charge. More cuts will incur additional fee(s). Remnants will be recycled unless specified at time of order, and selecting to ship remnants will cause additional shipping charges. Profile longer than 36″ will incur additional shipping fees. Additional lead time is required for all cuts. Please indicate the length, number of cuts you want and the desired cut length (inches) for each piece. For custom lengths and colors/finishes, speak with one of our Customer Solutions Specialists.
Adhesive Cover for Square Profile
Square profile cover with rounded corners and adhesive backing to finish the end of the square profile.
{{this.show}} {{this.hide}} New LED Standoffs
SO-LED-WHITE
This LED circuit board has white leds with 6 side firing lights. It comes with 4' lead wires to assist with those higher installations. Purchase a 1" diameter LED barrel, 1" diameter cap, power supply and a connection block to finish out your LED installation.
SO-LED-RED
This LED circuit board is contains red leds with 6 side firing lights. It comes with 4' lead wires to assist with those higher installations. Purchase a 1" diameter LED barrel, 1" diameter cap, power supply and a connection block to finish out your LED installation.
SO-LED-BLUE
This LED circuit board is a blue led with 6 side firing lights. It comes with 4' lead wires to assist with those higher installations. Purchase a 1" diameter LED barrel, 1" diameter cap, power supply and a connection block to finish out your LED installation.
SO-LED-GREEN
This LED circuit board is a green led with 6 side firing lights. It comes with 4' lead wires to assist with those higher installations. Purchase a 1" diameter LED barrel, 1" diameter cap, power supply and a connection block to finish out your LED installation.
SO-9050-LED - 1/2 inch
This 1" diameter x 1/2" long barrels has a hole one the side to accommodate the LED circuit board 4' long lead wires. This 1/2" long barrels works great with any 1" diameter caps. Purchase a power supply, connector, LED circuit board and a cap to complete your LED installation.
SO-9100-LED - 1 inch
This 1" diameter x 1" long barrels has a hole one the side to accommodate the LED circuit board 4' long lead wires. This 1/2" long barrels works great with any 1" diameter caps. Purchase a power supply, connector, LED circuit board and a cap to complete your LED installation.
SO-9150-LED - 1 -1/2 inch
This 1" diameter x 1-1/2" long barrels has a hole one the side to accommodate the LED circuit board 4' long lead wires. This 1-1/2" long barrels works great with any 1" diameter caps. Purchase a power supply, connector, LED circuit board and a cap to complete your LED installation.
{{this.show}} {{this.hide}} Additional New Products
New 1" Diameter Chrome StandOff Kit
This 1" diameter Chrome StandOff Mounting Kit includes four chrome StandOff caps and barrels, all necessary hardware, wall anchors and instructions.
New 5/8" Diameter Chrome StandOff Kit
Our 5/8" diameter Chrome StandOff Kits are a fast and easy way to mount your project. The kits include four StandOff caps and barrels, all necessary hardware, wall anchors and installation instructions.
New H-tube Extrusion
The H-tube Extrusion is 2-1/2″ diameter and has 1/4″ walls and comes in 8′ lengths. The H-tube extrusion is clear anodized aluminum. One end is drilled to accommodate three button head screws for attachment to the SL-A2.5BM mount which can be found here. More than four (4) cuts will incur additional fee(s). Remnants will be recycled unless specified below. Selecting to ship the remnants will add additional shipping charges. Profile over 36″ will incur additional shipping fees. Additional lead time is required for all cuts.
{{this.show}} {{this.hide}} Gyford StandOff Systems®
StandOffs
Our StandOffs product line consists of caps, barrels, edge grips, 4-way hubs, grippers and fixed hinges machined from aircraft-grade aluminum or #316 stainless steel. They are designed to hold signs, architectural panels, glass panels, banners, photographs, artwork and other materials at a predetermined distance from the surface upon which they are mounted.
StandOff Caps
StandOff Caps are the decorative anchor for any mounting surface. Available in different diameters and styles, our caps can be used in a variety of applications. Whether you are going for a sophisticated look with a Round Cap, unique with a Square Cap, industrial with a Hex Cap or for minimal interference with our Low Profile Cap, we have the solution you need. Custom colors and finishes are also available.
StandOff Barrels
StandOff Barrels are often referred to as "spacers" or simply "standoffs" and can be used to create length or layers between any surface. These are great if you are looking to mount some artwork or suspend a piece of glass over a countertop. We offer Round Aluminum Barrels, Square Aluminum Barrels and Round #316 Stainless Steel Barrels in a variety of lengths and diameters. They can be used with our caps and other StandOff components, like grippers or edge grips.
Wire Suspension
The Wire Suspension system is designed to support various light-weight applications that span a variety of distances. This product line uses our 3/64" stainless steel wire to suspend, grip and mount materials from any fixed or angled surface. Wire Suspension is a unique design alternative to mounting graphic, glass and architectural panels, banners, photographs, artwork, creating shelf units and a multitude of other applications.
WL-Rod & Wire
Our WL-Rod & Wireproduct line is an understated, yet sophisticated wire and rod suspension system machined from aircraftgrade aluminum. This stylish line of unique and modular components consists of connectors, travelers, turnbuckles, clips and mounting bases designed around minimal 3/64" stainless steel wire or 1/4" diameter aluminum rod. WL-Rod & Wire has a perfect selection for suspending and mounting lighter weight applications at various angles.
EZ-Rod & Wire
The EZ-Rod & Wire system includes grippers, panel grippers, connectors, turnbuckles, hinges and pulley wheels designed to be used with rod or wire. This system allows more flexibility in combining rods and wires to suspend and hold heavier applications from any flat or angled surface. The EZ-Rod & Wire system uses extruded rod in three diameters (1/4", 3/8", 5/8") and stainless steel wire in two diameters (1/8", 1/4").
StructureLite
The StructureLite system uses a variety of our extrusions, hinges, connection travelers, brackets, clamps and plates manufactured from aircraft-grade aluminum. This system allows more flexibility in combining rods, wires and profile to suspend and hold heavier applications from any angled surface. Create your own furniture, displays, signage mounting, partitions and tradeshow booths with StructureLite.
{{this.show}} {{this.hide}} Hardware
{{this.show}} {{this.hide}} Resources
Resources
We do everything in our power to make design and installation easier for our clients. We go above and beyond by offering howto videos, installation guides, one-on-one design support and inspiration through galleries and application photos. We also offer custom colors, finishes and parts.
Photo Gallery
We hope to provide you with some ideas of how you can incorporate our products into a variety of designs.
Solutions Gallery
Whether it's an office building, retail space, residence or university campus, we have the solution for you.
How-To Videos
Our tech lead will teach you how to install Gyford StandOff Systems® parts and hardware. For additional design support call one of our Client Solutions Specialists at 775-829-7272.
Frequently Asked Questions
Have a quick question for us? Browse our frequently asked questions. For additional questions, you can always contact our design support team at 775.829.7272 or by emailing info@standoffsystems.com
Catalog Downloads
Download our PDF Product Catalog (19.6 MB PDF)
Our entire 168 page Product Catalog contains products, photos, and specifications along with installation photographs.
Last Update: 2019-06-04