Evonik Industries - Protectosil

Building Protection Products

CONTACT INFO
2 Turner Place
Piscataway, NJ 08854
Toll Free: 800-828-0919
Phone: 732-289-1239
Continuing Education Logo
Request for information Evonik Industries - Protectosil Contact Us / RFI
CONTENT
CSI specifications / specs
Videos
Catalogs / Brochures
LEED data
Certificates
Datasheets
SOCIAL
COMPANY OVERVIEW
Protectosil® - your partner in successful building protection. Protectosil® is one of the most successful brands in the field of hydrophobization (water repellents), graffiti control, corrosion inhibition (corrosion inhibitor treatment) and surface protection (easy-to-clean). The range of Protectosil® products provides the perfect solution for almost every material.
ALL PRODUCTS

Protectosil® Water Repellents  

Protectosil® water repellent products penetrate deep into the substrate and keep water out.


Application Areas
LEED Product Information


Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS LEED

Protectosil® BHN is a clear, penetrating, breathable VOC-compliant surface treatment for use on concrete. The unique 100% silane treatment (no solvent) penetrates the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Creates a deep hydrophobic layer that prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. By combining low surface tension with a tailored rate of reaction, Protectosil BHN is able to move through the moisture boundary layer that lines the pore structure of the substrate. This permits the development of uniform gradient permeation — a consistent level of protection throughout the entire depth of penetration — allowing for longer treatment life, especially on wearing surfaces.

Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

A clear, penetrating, breathable water repellent for use on exterior above-grade concrete masonry units, brick masonry and most natural stones. Provides resistance against water, alkali attack, acid rain and waterborne staining. Penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® PB 100 is especially suited for making porous substrates such as split-face block water repellent. This water repellent effect stands up against wind-driven rain.


Technical Data Sheet
Health Product Declaration
LEED Product Information

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

A clear, penetrating, breathable water repellent for use on concrete, brick, concrete masonry units and some natural stones. Prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. Penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® PB VOC is especially suited for making porous substrates such as split-face block water repellent. This water repellent effect stands up against wind-driven rain.


Technical Data Sheet
LEED Product Information

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

Protectosil® 300 S is a solvent-free silane treatment that penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Creates a deep hydrophobic layer which prevents the ingress of water and water borne contaminants from entering the substrate and causing premature deterioration.


Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

Protectosil® CHEM-TRETE® BSM 400 brings you the next generation in silane technology. Our chemists have developed a pure silane that yields a water repellent with the longest service life available, unsurpassed performance on brick masonry and the lowest possible levels of volatile organic compounds. Protectosil® CHEM-TRETE® BSM 400 can be applied in the most extreme temperature conditions without changing the surface appearance of the substrate.


Technical Data Sheet - BSM 400
Health Product Declaration
LEED Product Information

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

A clear, penetrating, breathable water repellent for use on exterior above-grade concrete, brick masonry, concrete masonry units and some natural stones. Penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® 40 VOC is not a coating and as a result will not discolor or change the surface appearance in anyway.


Technical Data Sheet
LEED Product Information


Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

A clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones.


Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS DATASHEETS

A clear, penetrating, breathable water repellent and consolidant for use on exterior above-grade calcareous stone such as limestone and marble, brick masonry and natural stones. Penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. Protectosil® CHEM-TRETE® 40 D is not a coating and as a result will not change the surface appearance of the substrate.


Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS DATASHEETS

A clear, penetrating, waterborne, breathable water repellent for use on concrete. A ready-to-use, low-VOC silane emulsion. Reduces the ingress of water and waterborne contaminants that cause premature deterioration of the substrate. Penetrates the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. Protectosil® AQUA-TRETE® 40 water repellent is especially suited for application when solvent borne products are not acceptable, as in states that have VOC regulations for AIM coatings. Protectosil® AQUA-TRETE® 40 meets most national and state VOC regulations.



Technical Data Sheet
Health Product Declaration
LEED Product Information

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

A penetrating, waterborne, vapor-permeable water repellent for use on concrete, brick, concrete masonry units and some natural stones. A ready-to-use, low-VOC, silane/siloxane emulsion.


Technical Data Sheet



Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

Protectosil® AQUA-TRETE® 340 is a clear, breathable, penetrating, aqueous water no repellent intended for use on concrete, brick, and masonry. This product reduces and prevents the ingress of water and waterborne contaminants by chemically bonding with silica within a substrate. This permanently bonds the water repellent to the surface, preventing water and waterborne contaminants from entering the surface.

Technical Data Sheet
Safety Data Sheet

Rated 5 based on 1 product reviews
CATALOGS VIDEOS DATASHEETS

Protectosil® Corrosion Control  

A surface-applied clear liquid that penetrates concrete and provides an organofunctional molecule to inhibit the electro chemical corrosion process between the rebar and the chloride ions, and oxygen and moisture within the concrete.


Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS DATASHEETS
Highly efficient, water redispersible powdery corrosion inhibitor based on Multifunctional Silane Systems' for cementitious building materials.
Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS

A clear penetrating breathable VOC compliant surface treatment for use on concrete. The unique solvent-free silane treatment penetrates into the substrate and chemically bonds with silica to form a permanent attachment of the water repellent molecule. The addition of a migrating corrosion inhibitor allows the Protectosil® 300C to be used to reduce corrosion in steel reinforced concrete. The inhibitor migrates to reach the steel and form protective layer to reduce active corrosion sites.

Technical Data Sheet

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS DATASHEETS

Protectosil® Graffiti Control  

Protectosil® ANTIGRAFFITI protects surfaces to allow easy removal of a wide variety of graffiti, including spray paint, permanent marker, ink, bituminous paints, asphalt sealers, and other solvent or waterborne paints. Because of Protectosil® ANTIGRAFFITI's superior performance, standard non hazardous cleaners and low-pressure water blasting are sufficient removal methods for most graffiti.


Technical Data Sheet
Health Product Declaration
LEED Product Information

Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS

Protectosil® Easy to Clean Surfaces  

This product is a clear, breathable, zero-VOC treatment for concrete, brick, concrete masonry units, tiles, EFIS, pavers, natural stone, paint and other building materials. Protectosil® AQUA-TRETE® SG is a multifunctional system that provides superior water and stain resistance and also performs as a sacrificial antigraffiti coating. The primary function of Protectosil® AQUA-TRETE® SG is to repel water- and oilbased materials that cause staining, thereby making cleaning easier. The unique multifunctional chemistry makes the Protectosil® AQUA-TRETE® SG inherently UV stable. This feature allows longer surface repellency than is offered by competing technologies. Protectosil® AQUA-TRETE® SG decreases such problems as dirt buildup, staining and graffiti tagging.


Technical Data Sheet
Health Product Declaration
LEED Product Information


Rated 5 based on 1 product reviews
SPECS CATALOGS VIDEOS CERTIFICATIONS DATASHEETS