Sauna rooms have a full one year warranty. Sauna heaters have a one year warranty for parts and a five year warranty on labor if the heater is sent back to the factory.
Call 1-800-354-3342 for nearest dealer.
You frame and insulate the room. Use Finlandia's precut material package to make a sauna out of your space. 1x4 Western Red Cedar interior paneling is cut to size. Benches of 2x2 are premade. Fir and glass door is prehung. Sauna heater and accessories are all included as part of the kit. This is the most custom looking kit and the one most often used in new construction or remodeling projects.
Our prefab sauna rooms come in premade insulated panels that easily lock together to make the freestanding sauna. ETL approved conduit is installed inside the walls for ease of electrical hookup. Prefabs are meant to install in an open space where there is a solid surface waterproof floor. Modular rooms are available in a wide variety of sizes.
F-1T and F-2T manual wall controls include: thermostat, 60 min. timer, light switch, and indicator light. Made in USA. F-2 control does not include a 60 min. timer. It is meant for commercial use where multiple hour or all day sauna bathing is needed. Separate 7-day time clock is required . For use with FIN and CLUB heaters.
F-1T, 3 3/4"w x 9 1/4"h x 3 1/2"d
F-2T, 3 3/4"w x 9 1/4"h x 2 1/2"d
F-2, 3 3/4"w x 9 1/4"h x 2 1/2"d
COVER 3, To block access to thermostat dial
Surface or flush mount
Control pad size: 3 3/8"w x 1"d x 4 3/8"h
Power unit size CX170: 10 1/2"w x 3"d x 10 1/2"h
Power unit size CX30, CX45, CX30C: 14 1/4"w x 3"d x 10 1/2"h
Touch screen design. Adjusts time duration, temperature, and controls room light.
Xenio has 60 min. timer plus 10 min. to 12 hour delay timer (10 min. increments). Has degrees F or degrees C display settings. Control pad, power unit, heat sensor with 13 feet of cable, and 16 foot long data cable included. CX30C has additional 16 foot long humidity sensor cable. All cables connect to the power unit. Longer cables (82 ft. max.) may be ordered.Not recommended for commercial use.
CX170-U1-15 Use with 240v/1ph FIN heaters
CX170-U3-15 Use with 208v/3ph FIN-3 heaters
CX30-U1-U3 Dual 240v/1ph and 208v/3ph power. Use with Club K10G-U1-NC, K10G-U3-NC, all Cilindro HPC, and all Virta HL heaters.
CX30C-U1 Virta Combi HLS heaters
CX45-U1-U3 Dual 240v/1ph and 208v/3ph power. Use with Club K12.5G-U1-NC,K12.5G-U3-NC, K15G-U1-NC, and K15G-U3-NC
