The "ACE" can be adhesive or mechanically fastened and requires a 3" flat mounting area. They will fit most brands of screwed-down 36" panels that have three 12" flats and the majority of the standing seam floating panels with at least a 3 inch flat area. The waffled base enhances the bonding power when used with the SB-190. Starter points are provided for mechanically fastening with self-drilling screws. Professional ATI test results show the SnoBlox "ACE" held up to 4849 pounds when screw mounted and 1449 pounds when adhesive mounted using the Surebond SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard. Not recommend for placement in just isolated areas such as chimneys, doorways, vents and partial roof sections. Available in clear and the minimum order is 25.

Rated 5 based on 1 product reviews
The "DEUCE" can be adhesive or mechanically fastened and requires a 1.5" flat mounting area. They will fit most popular 36" panels with three 12" flats or four 9" flats without rib straddling! The waffled base provides almost triple the bonding power of a smooth bottom guard in this size category. Starter points are provided for mechanically fastening. Available in a variety of stock colors: Clear, Brown, Red, Green, White, Light Gray, Black and Blue. For online orders, the clear will be shipped unless otherwise specified in the comment box. Professional ATI test results show the SnoBlox Deuce held up to 3456 pounds when screw mounted and 1379 pounds when adhesive mounted using the SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard. Placement in just isolated areas such as chimneys, doorways, vents and partial roof sections is NOT recommended. Minimum order is 25.

Rated 5 based on 1 product reviews
Invented in 1976, Snojax I is the "original" clear snow guard that may only be mechanically fastened through the roof sheet into a structural purlin or support below. Because of the unique rib straddling design, they fit most brands of screwed-down 36" panels with three 12" flats or four 9" flats. The distinctive 8 holes in the face plate provide exceptional water drainage. Not recommend for placement in just isolated areas such as chimneys, doorways, vents and partial roof sections. Surebond SB-190 is not recommended with this guard. Available in clear and the minimum order is 25.

Rated 5 based on 1 product reviews
Invented in 1985, the Snojax II is the first "adhesive mounted" clear polycarbonate snow guard. The patented design features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Use the flat side down on a 5.25" flat surface or simply flip the unit over to straddle a small minor rib. Starter points are provided on both sides for mechanically fastening with self-drilling screws. Not recommend for placement in just isolated areas such as chimneys, doorways, vents and partial roof sections. Available in clear and the minimum order is 25.

Rated 5 based on 1 product reviews
Based on the proven patented Snojax II design, the Icejax I is a miniature version of the Icejax II. It features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Mount the flat side down on a 3" flat surface or simply flip the unit over to straddle a small minor rib. They will fit most brands of screwed-down 36" panels that have three 12" flats or four 9" flats and the majority of standing seam floating panels with at least a 3 inch flat mounting area. Professional ATI test results show the Icejax I held a remarkable 4200 pounds when screw mounted and up to 500 pounds when adhesive mounted using the Surebond SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard. Not recommend for placement in just isolated areas such as chimneys, doorways, vents and partial roof sections. Available in clear and the minimum order is 25.

Rated 5 based on 1 product reviews
Based on the proven Snojax II design, the Icejax II is the new improved version of the original adhesive mounted clear polycarbonate snow guard. This patented design still features unique interchangeable sides that can either be mechanically fastened or adhesive mounted. Use the flat side down on a 5" flat surface or simply flip the unit over to straddle a small minor rib. Starter points are provided on both sides for mechanically fastening with self-drilling screws. Professional ATI test results show the Icejax II held and astonishing 6388 pounds when screw mounted and a mind blowing 1561 pounds when adhesive mounted using the Surebond SB-190. All tests were performed simulating realistic snow loading conditions applied to face of the guard. Not recommend for placement in just isolated areas such as chimneys, doorways, vents and partial roof sections. Available in clear and the minimum order is 25.

Rated 5 based on 1 product reviews
Official Adhesive of SnoBlox-SnoJax.com. Requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. SureBond SB-190 provides improved life and durability, and better impact strength and has been approved for use in prisons to secure fixtures. SureBond bonds with concrete, finished metals, painted metals, plastics, fiberglass, pipe, conduit, FRP-plywood and composites, while eliminating costly fasteners, rattles and leaks. Minimum order is 6 when purchased without guards. No minimum with guard purchase.

Rated 5 based on 1 product reviews
THE CRICKET ELIMINATOR: The smaller of two models. This ingenious new product adds support and strength to your smaller vent pipes while the innovative fin design cuts through and assists in shedding the snow and ice from your roof. VentSaver FB-151 series is made from non-corrosive powder-coated aircraft grade aluminum with a pre-punched stainless steel strap to fit smaller sizes of pipe from 1.5"- 4". Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. It protects a standing profile of 6". Installation is quick and easy.

Rated 5 based on 1 product reviews
THE CRICKET ELIMINATOR: The larger of two models. We recommend this one for heavy snow areas. This ingenious new product adds support and strength to your vent pipes, chimneys or masts while the innovative fin design cuts through and assists in the shedding of snow and ice from your roof. Installation is quick and easy. The VentSaver P383 Series is made from non-corrosive powder-coated aircraft grade aluminum and stainless steel aircraft cable. Also provided are stainless steel nuts, bolts and heavy duty 1 1/2" lag screws. The 383 series will fit any roof pitch and an infinite array of sizes from 1" to 14" around. Its 9"standing profile is designed to protect taller stacks such as chimneys, gas vents and masts. The beauty of the 383 series is the variety of applications it will fit as well as the ease of installation.

Rated 5 based on 1 product reviews
A year round solution featuring stainless steel for strength and durability, color-match paint and clamp or U-Bracket mounting. Also available with Ice-Stoppers, to prevent snow and ice from sliding under the rail.

Rated 5 based on 1 product reviews
Kit includes 25 SnoBlox Deuce, 25 Galvanized Straps, 50 S.S. Bolts, 50 Lock Nuts & 1 tube of SB-1800 C Bondaprene. User assembled in the field. Strap can be cut to desired length. Can only be purchased as entire kit, minimum order is one kit.

Rated 5 based on 1 product reviews
The Plastic Snow Guard Market is becoming very competative. We developed the plastic snow guard 30 years ago and continue to offer the highest quality, independently tested snow guards on the market. We now offer the SNOBLOX products and the ICEJAX products on a wholesale level at extremely competative prices for resale to the public. To protect your reselling interests, product information and pricing will only be available after qualifying as a wholesaler.

Rated 5 based on 1 product reviews