Resilient tile flooring and accessories. Moisture barrier membrane. Noise reduction underlayment. MANUFACTURERS Acceptable Manufacturer: Karndean Designflooring, which is located at: 1100 Pontiac Ct.; Export, PA 15632; ASD Toll Free Tel: 888-266-4343; Fax: 800-887-7043; Email: info@karndean.com; Web: www.karndean.com ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions. Substitutions: Not permitted. Requests for substitutions will be considered in accordance with provisions of Section . RESILIENT TILE FLOORING ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Planks by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. WP311 GRANO. WP312 PALLEO. WP313 IGNEA. WP315 AURUM. WP316 RUBRA. WP317 ATRA. WP318 CARBO. WP321 LUTEUS. WP322 CANITIA. WP324 TERGO. WP325 ARRADO. WP326 NATURAL WALNUT. WP328 WASHED WALNUT. WP329 BLEACHED GREY WALNUT. WP330 TENEBRA WALNUT. WP331 TEXTUM. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Planks by Karndean Designflooring. Dimensions: 48 by 9 inches (1219 by 228 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. WP411 NIVEUS. WP413 MAGNA. WP414 ARGEN. WP415 ORDO. WP416 LINEA. WP417 SYLVA. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Tiles by Karndean Designflooring. Dimensions: 18 by 18 inches (457 by 457 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: SP115 NERO. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Tiles by Karndean Designflooring. Dimensions: 18 by 24 inches (457 by 610 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SP212 TERRA. SP213 URBUS. SP215 FERRA. SP216 FUMO. SP218 LUTUM. SP219 CASABLANCA. SP220 MARRAKESH. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Tiles by Karndean Designflooring. Dimensions: 18 by 3 inches (457 by 76 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: SM-SP216 FUMO. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Tiles by Karndean Designflooring. Dimensions: 18 by 36 inches (457 by 915 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SP714 CLARUS. SP716 AUREGO. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Planks by Karndean Designflooring. Dimensions: 36 by 4 inches (915 by 102 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. WP511 WEATHERED ELM. WP513 GOLDEN TEAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Range Tiles by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: SP718 TEXO. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Opus Heritage Range Tiles by Karndean Designflooring. Dimensions: 9 by 9 inches (228 by 228 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: CLIF-01 CLIFTON. CLIF-04 CLIFTON. Resilient Tile Flooring: Opus Heritage Range Tiles by Karndean Designflooring. Dimensions: 12 by 12 inches (305 by 305 mm). Thickness: 3/32 inches (2.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 1700. Classification: ASTM F 1700: Class 3 Type B. Reaction to Fire: ASTM E 648-06: Class 1. ASTM E 662-15a: Pass. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Less than 8. Abrasion Resistance: ASTM 3884: Pass. Dimensional Stability: ASTM F 2199: Pass. Indentation, Residual: ASTM F 1914: Pass. Castor Chair Continuous Use: ASTM D 3884: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0120 m^2K/W. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number, Name: MAYF-01 MAYFAIR. MAYF-02 MAYFAIR. Resilient Tile Flooring: Knight Tile Range Planks by Karndean Designflooring. Dimensions: 36 by 4 inches (915 by 102 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.08 inches (2 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.88). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. KP32 SYCAMORE. KP35 CEDAR. KP36 WALNUT. KP37 ELM. KP39 WARM OAK. KP67 ARAN OAK. KP69 LARNE OAK. KP70 BRAY OAK. KP90 HONEY MAPLE. KP93 NATIVE KOA. KP107 SIENNA. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Knight Tile Range Planks by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.08 inches (2 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.88). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. KP94 PALE LIMED OAK. KP96 MID LIMED OAK. KP97 CLASSIC LIMED OAK. KP98 AGED OAK. KP99 LIME WASHED OAK. KP105 WHITE PAINTED PINE. KP131 GREY SCANDI PINE. KP138 GREY LIMED OAK. KP140 NICKEL SPOTTED GUM. KP141 URBAN SPOTTED GUM. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Knight Tile Range Tiles by Karndean Designflooring. Dimensions: 12 by 12 inches (305 by 305 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.08 inches (2 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: D 2047: Pass (Dry 0.88). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. ST5 SOAPSTONE. T74 MIDNIGHT BLACK. T84 COPPER. T89 ANDECITE. T90 CARRARA. T99 RONA. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Knight Tile Range Tiles by Karndean Designflooring. Dimensions: 12 by 18 inches (305 by 457 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.08 inches (2 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: D 2047: Pass (Dry 0.88). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. ST12 BATH STONE. ST13 PORTLAND STONE. ST14 CUMBRIAN STONE. ST16 GREY RIVEN SLATE. ST17 HONED OYSTER SLATE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Knight Tile Rigid Core Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Non-beveled edge. Compliance: ASTM F 3261. Classification, ASTM F 1700: Class 3 Type B. Slip Resistance, ASTM D 2047: Pass (Dry 0.89). Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance, ASTM F 925: Pass. Light Fastness, ASTM F 1515: Less than 8. Abrasion Resistance, ASTM D 4060: 20000 Cycles. Dimensional Stability, ISO 23999: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC69. Indentation, Residual, ASTM F 1914: Pass. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SCB-KP94 PALE LIMED OAK. SCB-KP96 MID LIMED OAK. SCB-KP97 CLASSIC LIMED OAK. SCB-KP98 AGED OAK. SCB-KP99 LIMED WASHED OAK. SCB-KP105 WHITE PAINTED PINE. SCB-KP131 GREY SCANDI PINE. SCB-KP138 GREY LIMED OAK. SCB-KP140 NICKEL SPOTTED GUM. SCB-KP141 URBAN SPOTTED GUM. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Knight Tile Rigid Core Tiles by Karndean Designflooring. Dimensions: 12 by 24 inches (305 by 610 mm). Wear Layer Thickness: 12 mil (0.3 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Non-beveled edge. Compliance: ASTM F 3261. Classification, ASTM F 1700: Class 3 Type B. Slip Resistance, ASTM D 2047: Pass (Dry 0.89). Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance, ASTM F 925: Pass. Light Fastness, ASTM F 1515: Less than 8. Abrasion Resistance, ASTM D 4060: 20000 Cycles. Dimensional Stability, ISO 23999: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC69. Indentation, Residual, ASTM F 1914: Pass. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SCB-ST13 PORTLAND STONE. SCB-ST16 GREY RIVEN SLATE. SCB-ST17 HONED OSYTER SLATE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Van Gogh Range Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Wear Layer Thickness: 20 mil (0.5 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Micro bevel. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. VG1-7 BRACKEN. VG5-7 BURNT GINGER. VGW33T COPPER GUM. VGW39T ANTIQUE KARRI. VGW40T MELBOURNE LARCH. VGW41T MERBAU. VGW42T JATOBA. VGW44T LANCEWOOD. VGW49T RIMU. VGW50T MACROCAPRA. VGW51T AGED KAURI. VGW53T WELLINGTON OAK. VGW54T CHRISTCHURCH OAK. VGW70T SMOKED OAK. VGW71T RECLAIMED MAPLE. VGW76T VINTAGE PINE. VGW81T COUNTRY OAK. VGW85T FRENCH OAK. VGW86T CLASSIC OAK. VGW89T EBONY. VGW91T TAWNY OAK. VGW92T BURGUNDY OAK. VGW93T HESSIAN OAK. VGW94T HONEY OAK. VGW95T LIME-WASHED CYPRESS. VGW96T BURNISHED CYPRESS. VGW97T BURNISHED BEECH. VGW98T SMOKED BEECH. VGW99T RECLAIMED REDWOOD. VGW100T AGED REDWOOD. VGW101T SALVAGED REDWOOD. VGW102T CHARRED OAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Van Gogh Rigid Core Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Wear Layer Thickness: 20 mil (0.5 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Micro bevel. Compliance: ASTM F 3261. Classification, ASTM F 1700: Class 3 Type B. Slip Resistance, ASTM D 2047: Pass (Dry 0.89). Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance, ASTM F 925: Pass. Light Fastness, ASTM F 1515: Less than 8. Abrasion Resistance, ASTM D 4060: 20000 Cycles. Dimensional Stability, ISO 23999: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC69. Indentation, Residual, ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SCB39 ANTIQUE KARRI. SCB42 JATOBA. SCB44 LANCEWOOD. SCB53 WELLINGTON OAK. SCB70 SMOKED OAK. SCB71 RECLAIMED MAPLE. SCB76 VINTAGE PINE. SCB81 COUNTRY OAK. SCB85 FRENCH OAK. SCB86 CLASSIC OAK. SCB91 TAWNY OAK. SCG93 HESSIAN OAK. SCB99 RECLAIMED REDWOOD. SCB100 AGED REDWOOD. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Karndean LooseLay Range Planks by Karndean Designflooring. Dimensions: 41.3 by 9.85 inches (1050 by 250 mm). Wear Layer Thickness: 20 mil (0.5 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.92). ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0245 m^2K/W. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LLP5-7 BURNT GINGER. LLP33 COPPER GUM. LLP38 TASMANIAN WATTLE. LLP39 ANTIQUE KARRI. LLP91 MERBAU. LLP92 COUNTRY OAK. LLP94 NEWPORT. LLP95 ASHLAND. LLP108 PROVIDENCE. LLP109 STAMFORD. LLP110 BURLINGTON. LLP111 BOSTON. LLP112 HARTFORD. LLP113 CAMBRIDGE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Karndean LooseLay Range Tiles by Karndean Designflooring. Dimensions: 19.7 by 24 inches (500 by 610 mm). Wear Layer Thickness: 20 mil (0.5 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.92). ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0245 m^2K/W. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LLT201 COLORADO. LLT202 INDIANA. LLT203 MONTANA. LLT206 GEORGIA. LLT208 TINO. LLT209 CAPRI. LLT211 VULCANO. LLT212 DAKOTA. LLT213 MAINE. LLT214 SEATTLE. LLT217 VERMONT. LLT218 ONTARIO. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Da Vinci Range Planks by Karndean Designflooring. Dimensions: 36 by 3 inches (915 by 76 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RP41 AUSTRALIAN WALNUT. RP61 CANADIAN MAPLE. RP73 KENYAN TIGERWOOD. RP91 LORENZO WARM OAK. RP94 SCORCHED OAK. RP95 BLENDED OAK. RP96 LIMED SILK OAK. RP97 LIMED JUTE OAK. RP98 LIMED LINEN OAK. RP99 LIMED COTTON OAK. RP100 COASTAL DRIFTWOOD. RP101 BEACH DRIFTWOOD. RP102 NATURAL OAK. RP103 HARVEST OAK. RP104 SINGLE SMOKED ACACIA. RP105 DOUBLE SMOKED ACACIA. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Da Vinci Range Tiles by Karndean Designflooring. Dimensions: 16 by 16 inches (406 by 406 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. CC08 OXIDE. LST03 PIAZZA LIMESTONE. LST04 SPIRITO LIMESTONE. LST05 SANTI LIMESTONE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Da Vinci Range Tiles by Karndean Designflooring. Dimensions: 12 by 18 inches (305 by 457 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. CER11 MOLTEN. CER12 IRON ORE. CER13 EISEN. CER14 CARBON. CER15 DUNE. CER16 SABLE. CER17 DRIFT. CER19 BURNET. CER20 CAMBRIC. CER21 SINDON. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Hand Crafted Wood Collection Planks by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. EW01 HICKORY PAPRIKA. EW02 HICKORY PEPPERCORN. EW03 HICKORY NUTMEG. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Limestone Collection Tiles by Karndean Designflooring. Dimensions: 9 assorted tiles sizes in 36 by 36 inches (915 by 915 mm) roman pattern design. Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LM01 JERSEY. LM02 GUERNSEY. LM03 ALDERNEY. LM20 HERM. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Marble collection Tiles by Karndean Designflooring. Dimensions: 16 by 16 inches (406 by 406 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LM15 OTONO. LM16 FIORE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Slate collection Tiles by Karndean Designflooring. Dimensions: 18 by 24 inches (457 by 610 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LM05 MELBOURNE. LM06 CANBERRA. LM21 OAKELEY. LM22 CORRIS. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Travertine Collection Tiles by Karndean Designflooring. Dimensions: 18 by 24 inches (457 by 610 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LM07 WASHBURN. LM08 CALDERA. LM09 GALLATIN. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Travertine Collection Tiles by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LM27 WASHBURN. LM28 CALDERA. LM29 GALLATIN. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RL01 SPRING OAK. (Oak Royale). RL02 SUMMER OAK. (Oak Royale). RL03 AUTUMN OAK. (Oak Royale). RL04 WINTER OAK. (Oak Royale). RL05 SPANISH CHERRY. (Cherry Royale). RL07 SANTINA CHERRY. (Cherry Royale). RL12 STORM OAK. (Oak Royale). ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Planks by Karndean Designflooring. Dimensions: 4 inches (102 mm), 5 inches (127 mm), 7 inches (178 mm) by Random Lengths. Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RL09 COFFEE MAPLE. RL11 TOASTED MAPLE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Planks by Karndean Designflooring. Dimensions: 56 by 9 inches (1422 by 228 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. EW11 WEATHERED HICKORY. EW12 VINTAGE HICKORY. EW13 CLASSIC HICKORY. EW21 RECLAIMED CHESTNUT. EW22 SALVAGED CHESTNUT. RL21 GLACIER OAK. RL23 SAVANNAH OAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Oak Premiere Collection Planks by Karndean Designflooring. Dimensions: 36 by 6 inches (915 by 152 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. HC01 DAWN OAK. HC03 DUSK OAK. HC04 SUNDOWN OAK. HC06 MIDNIGHT OAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Art Select Range; Parquet Collection Planks by Karndean Designflooring. Dimensions: 18 by 3 inches (457 by 76 mm). Wear Layer Thickness: 30 mil (0.7 mm). Tile Thickness: 1/8 inches (3 mm). Edge: Beveled edge, 2.5 mm thick. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). Item Number and Name: SM-RL21 GLACIER OAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Karndean LooseLay Longboard Range Planks by Karndean Designflooring. Dimensions: 59.1 by 9.85 inches (1500 by 250 mm). Wear Layer Thickness: 20 mil (0.5 mm). Tile Thickness: 0.18 inches (4.5 mm). Edge: Non-beveled edge. Material Compliance: ASTM F 1700. Reaction to Fire: ASTM E 662, ASTM E 648. Slip Resistance: ASTM D 2047: Pass (Dry 0.89). ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.0245 m^2K/W. Item Number and Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LLP301 TWILIGHT OAK. LLP302 RAVEN OAK. LLP303 ANTIQUE HEART PINE. LLP304 WEATHERED HEART PINE. LLP305 RECLAIMED HEART PINE. LLP306 PEARL OAK. LLP307 NEUTRAL OAK. LLP308 FRENCH GREY OAK. LLP309 TAUPE OAK. LLP310 CHAMPAGNE OAK. LLP315 CHARACTER WALNUT. LLP317 LEMON SPOTTED GUM. LLP330 WORN FABRIC OAK. LLP331 SHADOW FABRIC OAK. LLP332 URBAN FABRIC OAK. LLP333 VANILLA OAK. LLP335 WEATHERED AMERICAN PINE. LLP336 DISTRESSED AMERICAN PINE. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Korlok Select Range Planks by Karndean Designflooring. Dimensions: 56 by 9 inches (1420 by 225 mm). Thickness: 1/4 inches (6.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 3261. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 4060: 36000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC68. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.052 m^2K/W Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RKP8101 BALTIC WASHED OAK. RKP8102 WASHED VELVET ASH. RKP8103 WARM ASH. RKP8104 WASHED GREY ASH. RKP8105 TEXAS WHITE ASH. RKP8107 SMOKED BUTTERNUT. RKP9108 WASHED BUTTERNUT. RKP8109 RECLAIMED FRENCH OAK. RKP8110 ANTIQUE FRENCH OAK. RKP8111 BALTIC LIMED OAK. RKP8114 CATHEDRAL OAK. RKP8115 ENGLISH CHARACTER OAK. RKP8116 CANADIAN URBAN OAK. RKP8122 NATURAL KOA. RKP8124 KILAUEA KOA. RKP8126 SMOKED KOA. RKP8202 OSYTER OAK. RKP8203 SHADOW OAK. RKP8206 BARLEY OAK. RKP8208 SILVER BARNWOOD. RKP8209 SALVAGED BARNWOOD. RKP8211 WEATHERED BARNWOOD. RKP8215 WARM BRUSHED OAK. RKP8217 IVORY BRUSHED OAK. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Korlok Select Range Planks by Karndean Designflooring. Dimensions: 24 by 6 inches (609 by 152 mm). Thickness: 1/4 inches (6.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 3261. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 4060: 36000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC68. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.052 m^2K/W. Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SM-RKP8208 SILVER BARNWOOD. SM-RKP8209 SALVAGED BARNWOOD. SM-RKP8211 WEATHERED BARNWOOD. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: Korlok Select Stone Range by Karndean Designflooring. Dimensions: 18 by 24 inches (457 by 610 mm). Thickness: 1/4 inches (6.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 3261. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 4060: 36000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC68. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.052 m^2K/W Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RKT2407 SHADOW LACE. RKT2408 ALPINE LACE. RKT3001-G VOLCANIC SLATE. RKT3002-G ANTIQUE COPPER. RKT3003-G MOUNTAIN SLATE. RKT3004-G COASTAL FOG. RKT3005-G ARTIC MIST. RKT3006-G BLACK SANDS. RKT3007-G METRO GREY. RKT3008-G OXFORD GREY. RKT3009-G PEBBLE GREY. RKT3010-G SANDSTORM. RKT3011-G AGED PARCHMENT. RKT3012-G PALAZZO MARBLE. RKT3013-G BRUNELLE MARBLE. Resilient Tile Flooring: Korlok Select Stone Range by Karndean Designflooring. Dimensions: 24 by 6 inches (609 by 152 mm). Thickness: 1/4 inches (6.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 3261. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 4060: 36000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC68. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.052 m^2K/W Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. SM-RKT3012-G PALAZZO MARBLE. SM-RKT3013-G BRUNELLE MARBLE. Resilient Tile Flooring: Korlok Reserve Range Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Thickness: 1/4 inches (6.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: Micro bevel. Compliance: ASTM F 3261. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 4060: 36000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC68. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Thermal Conductivity: ISO 8302, 0.052 m^2K/W. Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. RCP6531 VINTAGE OREGON OAK. RCP6532 WEATHERED OAK. RCP6533 NORTH AMERICAN OAK. RCP6534 LIMED COASTAL OAK. RCP6535 AGED SPANISH OAK. RCP6536 NATURAL OILED OAK. RCP6537 TAVERN OILED OAK. RCP6538 LIMED CHARCOAL OAK. RCP6539 CHARRED WEATHERED PINE. RCP6540 PROVINCIAL OILED OAK. RCP6541 GREY OILED OAK. RCP6542 TEXAN WHISKEY WALNUT. ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: KTrade Gluedown Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Thickness: 0.08 inches (2 mm). Wear Layer: 12 mil (0.3 mm). Beveled Edge: No. Compliance: ASTM F 1700. Slip Resistance: ASTM D 2047. Reaction to Fire: ASTM E 648-06: Class 1, ASTM E 662. Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 3884: 42000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC43. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. PVP120 CHARLESTON. PVP121 ATHENS. PVP123 NAPLES. PVP128 CLEMSON. PVP142 SICILIA. PVP145 TORCELLO. PVP147 LAMPIONE. PVP148 LINOSA. PVP150 LEVANZO. PVP151 VIVARA ** NOTE TO SPECIFIER ** Delete resilient floor tile type if not required. Resilient Tile Flooring: KTrade LooseLay Planks by Karndean Designflooring. Dimensions: 41.3 by 9.85 inches (1050 by 250 mm). Thickness: 0.18 inches (4.5 mm). Wear Layer: 20 mil (0.5 mm). Beveled Edge: No. Compliance: ASTM F 1700. Slip Resistance: ASTM D 2047 Reaction to Fire: ASTM E 648-06: Class 1, ASTM E 662 Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 3884: 113000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC56. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. LLP120 CHARLESTON. LLP121 ATHENS. LLP123 NAPLES. LLP128 CLEMSON. LLP142 SICILIA. LLP145 TORCELLO. LLP147 LAMPIONE. LLP148 LINOSA. LLP150 LEVANZO. LLP151 VIVARA. ** NOTE TO SPECIFIER ** Delete if application does include Karndean Borders or feature strips. Resilient Tile Flooring: KTrade Rigid Core Planks by Karndean Designflooring. Dimensions: 48 by 7 inches (1219 by 178 mm). Thickness: 0.18 inches (4.5 mm). Wear Layer: 12 mil (0.3 mm). Beveled Edge: No. Compliance: ASTM F 1700. Slip Resistance: ASTM D 2047 Reaction to Fire: ASTM E 648-06: Class 1, ASTM E 662 Staining Resistance: ASTM F 925: Pass. Light Fastness: ASTM F 1515: Pass. Abrasion Resistance: ASTM D 3884: 113000 Cycles. Dimensional Stability: ASTM F 2199: Pass. Acoustic Impact Noise Reduction: ASTM E 492-09: IIC56. Indentation, Residual: ASTM F 1914: Pass. ** NOTE TO SPECIFIER ** Suitable for underfloor heating. Item Number, Name: ** NOTE TO SPECIFIER ** Delete item numbers and names not required. PVP120-SCB CHARLESTON. PVP121-SCB ATHENS. PVP123-SCB NAPLES. PVP128-SCB CLEMSON. PVP142-SCB SICILIA. PVP145-SCB TORCELLO. PVP147-SCB LAMPIONE. PVP148-SCB LINOSA. PVP150-SCB LEVANZO. PVP151-SCB VIVARA. Karndean Borders and Feature Strips: Location, quantity, type, style and configuration as indicated on the Drawings. ACCESSORIES ** NOTE TO SPECIFIER ** Delete if floor care kit not required. Karndean Floor Care Kit with cleaning and maintenance products in quantities appropriate to size and scope of resilient flooring application are available but not required. Adhesive: Manufacturer's recommended adhesive as follows. ** NOTE TO SPECIFIER ** Karndean Epoxy is a 2-part epoxy adhesive for moisture prone areas. Epoxy resin suitable for areas with extreme temperature variations. Moisture shall be less than 90 percent RH or 8 lb MVER. 45 minutes working time. Recommended for 3 seasons rooms, over metal substrates, and epoxy coated floors. Delete if not required. Karndean Epoxy adhesive. ** NOTE TO SPECIFIER ** If moisture is not within the manufacturer's specifications, a moisture mitigation system shall be used to correct the problem. Delete if not required. Moisture readings higher than approved by the adhesive shall use a moisture mitigation system. ** NOTE TO SPECIFIER ** Delete if not required. Karndean DrySet Roll-on Adhesive. ** NOTE TO SPECIFIER ** If moisture is not within the manufacturer's specifications, a sealer can be used to correct the problem. Delete if not required. Moisture readings higher than approved by the adhesive shall use a moisture mitigation system. ** NOTE TO SPECIFIER ** Delete if not required. Karndean K-Spray Spray Adhesive. ** NOTE TO SPECIFIER ** If moisture is not within the manufacturer's specifications, a sealer can be used to correct the problem. Delete if not required. Moisture readings higher than approved by the adhesive shall use a moisture mitigation system. ** NOTE TO SPECIFIER ** Delete if not required. Karndean K-95 HM. ** NOTE TO SPECIFIER ** If moisture is not within the manufacturer's specifications, a sealer can be used to correct the problem. Delete if not required. Moisture readings higher than approved by the adhesive shall use a moisture mitigation system. ** NOTE TO SPECIFIER ** Coordinate with Division 1 sections Unit Prices, Allowances. Depending on application and substrate condition, scope of work for substrate preparation can vary greatly. Manufacturer's recommended substrate tolerances ensure high quality finish appearance. Delete adhesive types not required. Portland based cementitious base leveler or patch. Gypsum based not acceptable unless properly prepared. ** NOTE TO SPECIFIER ** Delete if application does require moisture barrier membrane. MOISTURE BARRIER MEMBRANE Moisture Barrier Membrane: ** NOTE TO SPECIFIER ** KOVARA 95 is a moisture barrier membrane designed to be laid down above concrete floor slabs and below floor coverings to protect these materials, as well as their adhesives, from any staining, warping, or mold that may result from water vapor emissions and alkaline salts infiltrating through the concrete slab up to 95 percent relative humidity. Delete if not required. KOVARA 95 as manufactured by GCP Applied Technologies. Material: Three-layer composite construction of a HDPE bottom layer, glass mat middle layer, and gray mineral top layer. Thickness: 0.024 inches (0.61 mm). Resistant to heavy rolling loads. No VOC content. Does not support mold or mildew growth. Provides resistance to 95 percent relative humidity. Tapes: As recommended by Manufacturer. ** NOTE TO SPECIFIER ** KOVARA MBX is a moisture barrier membrane designed to be laid down above concrete floor slabs and below floor coverings to protect these materials, as well as their adhesives, from any staining, warping, or mold that may result from water vapor emissions and alkaline salts infiltrating through the concrete slab up to 99.5 percent relative humidity. Delete if not required. KOVARA MBX as manufactured by GCP Applied Technologies. Material: Three-layer composite construction of a HDPE bottom layer, glass mat middle layer, and dark blue mineral top layer. Thickness: 0.028 inches (0.71 mm). Resistant to heavy rolling loads. No VOC content. Does not support mold or mildew growth. Provides resistance to 99.5 percent relative humidity. Tapes: As recommended by Manufacturer. ** NOTE TO SPECIFIER ** QuietChoice is a Noise Reduction Underlayment engineered to reduce sound transmission within multi-level structures. Delete if application does not require noise reduction underlayment. NOISE REDUCTION UNDERLAYMENT Noise Reduction Underlayment: QuietChoice Acoustic Underlayment. Material Composition: Frothed polyurethane foam. Thickness: 0.055 inches (1.4 mm). Sound Rating with 6 inch (152 mm) concrete slab, drop ceiling, and 5 mm (0.20 inch) LVT: Impact Isolation Class (IIC): 71. Delta IIC: 25.