Noise Control & Building Envelopes

Quiet Qurl® 013 is a sound control mat designed to limit impact noise between floors. This resilient mat absorbs noise when sandwiched in a mass-spring-mass building design.

Quiet Qurl 013 is the first entangled net product to be used in a system with less than an inch of total thickness. Quiet Qurl 013 is engineered for a minimum thickness of 0.75" gypsum concrete pour. It is a Class A fire-rated product.  

Quiet Qurl® 025 is a sound control mat designed to limit impact noise between floors. This resilient mat absorbs noise when sandwiched in a mass-spring-mass building design.

Designed for critical applications in which gypsum concrete will be utilized, Quiet Qurl 025 prevents liquid moisture from passing through to the substrate – an essential quality for wood frame construction.

Quiet Qurl® 040 is a noise control insulation mat designed to limit impact noise between floors. This resilient mat absorbs noise when sandwiched in a mass-spring-mass building design.

This mat prevents liquid moisture in lightweight concrete and gypsum concrete from passing through to the substrate, which is an essential quality for wood frame construction.

Quiet Qurl® 075 is a noise control insulation mat designed to limit impact noise between floors. This resilient mat absorbs noise when sandwiched in a mass-spring-mass building design. The mat is designed for retrofit of existing buildings where a ceiling assembly is not utilized. In critical areas of new construction, 075 will add approximately 35 extra IIC points.

Quiet Qurl® 013 MT is a thin-profile noise control insulation mat designed to limit impact noise between floors. This high-end performance mat has a point-bonded, moisture-resistant fabric laminated to the surface so that gypsum concrete and other materials can be placed to create a floating floor. The bottom side of the MT version, a highly compressible polyester fabric is bonded. 

The MT addition will create up to an additional 5 IIC points for the assembly verses the standard version. In laboratory tests, Quiet Qurl® 013 MT performs better then thicker sounds mats in a thinner application.

Quiet Qurl® 025 MT is a noise control insulation mat designed to limit impact noise between floors. A point-bonded, moisture-resistant fabric is laminated to the surface so that gypsum concrete and other materials can be placed to create a floating floor.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded.

Quiet Qurl® 040 MT is a noise control insulation mat designed to limit impact noise between floors. A point-bonded, moisture-resistant fabric is laminated to the surface so that gypsum concrete and other materials can be placed to create a floating floor.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded. This muffling fabric almost completely compresses when installed with a 1.5" gypsum concrete floor underlayment.

Quiet Qurl® 075 MT is a noise control insulation mat designed to limit impact noise between floors. A white liquid moisture-resistant fabric is laminated to the surface so that gypsum concrete and other materials can be placed to create a floating floor.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded. The MT fabric has the ability to add 5 to 7 IIC points to a mat's performance through diffusion of air pressure in the cavity.

The product is designed for retrofit of existing buildings in which a ceiling assembly is not utilized. In critical areas of new or retrofit construction, Quiet Qurl® 075 MT will provide the highest level of noise performance available on the market in any entangled net product. 

Note: In all retrofit and loft conversion applications performance should be proven with on-site field tests. No floor/ceiling performance on prior projects can replicate performance on another specific project.

Quiet Qurl® 013 RF is a noise control insulation mat designed to limit noise between floors. The product has a reinforced fabric and scrim, which are adhered together, in combination with the standard “entangled net" core material. 

Testing has shown that the addition of a combination reinforced scrim and fabric will enhance tensile strength up to 20%. The 95% void means that the finished floor will only have 5% contact with the subfloor, greatly limiting vibration. 

Quiet Qurl 013 RF is the first entangled net product to be used in a system with less than an inch of total thickness. The system is engineered for sound mat and a gypsum concrete pour between 0.75-Inch to 0.875-Inch.

Quiet Qurl® 025 RF is a noise control insulation mat designed to limit noise between floors. The product has a reinforced fabric and scrim, which are adhered together, in combination with the standard “entangled net" core material.

Testing has shown that the addition of a combination reinforced scrim and fabric will enhance tensile strength up to 20%. The 95% void means that the finished floor will only have 5% contact with the subfloor, greatly limiting vibration. 

Quiet Qurl® 075 RF is a noise control insulation mat designed to limit impact noise between floors. The top side is made with a reinforced scrim and fabric combination to give the gypsum concrete some added strength.

Note: In all retrofit and loft conversion applications performance should be proven with on-site field tests. No floor/ceiling performance on prior projects can replicate performance on another specific project.

Quiet Qurl® 025 RF MT is a noise control insulation mat designed to limit impact noise between floors. It is made with a reinforced scrim to give gypsum concrete additional strength.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded. This muffling fabric almost completely compresses when installed with a 1.25" gypsum concrete floor underlayment.

Quiet Qurl® 040 RF MT is a noise control insulation mat designed to limit impact noise between floors. It is made with a reinforced scrim to give gypsum concrete additional strength.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded. This muffling fabric almost completely compresses when installed with a 1.25" gypsum concrete floor underlayment.

Quiet Qurl® 075 RF MT is a noise control insulation mat designed to limit impact noise between floors. The top side is made with a reinforced scrim and fabric combination to give the gypsum concrete some added strength.

On the bottom side of the MT version, a highly compressible polyester fabric is bonded. The MT fabric has the ability to add 5 to 7 IIC points to a mat's performance through diffusion of air pressure in the cavity.

Note: In all retrofit and loft conversion applications performance should be proven with on-site field tests. No floor/ceiling performance on prior projects can replicate performance on another specific project.

Quiet Qurl® Step Soft underlayment redefines comfort and noise reduction in flooring applications with its advanced, high-density foam technology. This premium product not only diminishes the sound of footsteps and other impact noises but also delivers an unmatched underfoot feel that elevates the overall user experience in any setting. Designed to work seamlessly under hardwood, laminate, and tile, Step Soft contributes to a significant improvement in both the acoustic and tactile qualities of a floor.

Its superior sound dampening capabilities make it an indispensable choice for upscale residential units, commercial offices, and hospitality venues seeking to enhance the quietness and luxury of their environments. Furthermore, Step Soft's composition is engineered to resist compression, ensuring long-term performance and stability beneath various flooring types.

Quiet Qurl® Reinforcement RWT is a crack suppression mat used to reinforce gypsum concrete and many types of concrete in thin applications. 

The 3/8" (9-mm) thickness is perfect to provide the added strength needed in the assembly when the gypsum concrete is less than traditional depth. 

The monofilament helps cracks remain in place so that a tile, marble, stone or vinyl surface can be successfully applied. Quiet Qurl is a Class A fire-rated product.

The Perimeter Isolation Strip is a specialized accessory designed to maximize the effectiveness of the Quiet Qurl® sound mat systems. By ensuring a physical separation between the flooring assembly and adjacent walls, this strip plays a crucial role in Keene's “mass-spring-mass" sound abatement philosophy, effectively preventing flanking paths for sound transmission. The inclusion of the Perimeter Isolation Strip in any Quiet Qurl® installation is essential for achieving the desired level of sound control, making it a staple in both residential and commercial projects focused on creating acoustically isolated environments.

We offer 4 versions of Quiet Qurl Perimeter Isolation: 

1. Quiet Qurl® Perimeter Isolation 025, non-sticky

2. Quiet Qurl® Perimeter Isolation with Quik Stick 2″, Sticky

3. Quiet Qurl® Perimeter Isolation with Quik Stick 3″, Sticky

4. Quiet Qurl® Perimeter Isolation with Quik Stick 3.5″, Sticky and has EASY-FOLD

Cylent Assurance Clips are a revolutionary sound isolation system designed to dramatically reduce noise transfer through ceilings and walls. By effectively decoupling the gypsum board from the structural framing, these clips interrupt the path of sound waves, greatly minimizing both airborne and structure-borne noises. Ideal for enhancing privacy in multi-unit housing, commercial spaces, and sensitive environments like recording studios and home theaters, Cylent Assurance Clips are easy to install and compatible with various construction designs. Their robust construction ensures lasting performance, effectively absorbing and dampening vibrations to create quieter, more serene indoor spaces.

RC Assurance Clips provide a solution for building projects demanding high levels of sound insulation. By forming a resilient channel that separates the drywall from the framing, these clips significantly improve the STC rating of wall and ceiling assemblies. This separation reduces the transmission of sound between rooms or dwelling units, making RC Assurance Clips particularly valuable in densely populated buildings, educational institutions, and anywhere tranquility is paramount. Their innovative design is not only effective in blocking noise but also enhances the structural integrity of the assembly, ensuring a durable and long-lasting soundproofing solution.

Space Assurance products offer a strategic approach to acoustical management in ceiling and wall applications. Designed to target and minimize sound bridging, these solutions are critical for achieving optimal sound isolation and enhancing the acoustic environment of any space.

By addressing the often-overlooked gaps and structural connections that can transmit sound, space assurance ensures a comprehensive noise mitigation strategy.

KeedeRoll™ 100 is an uncoupling mat that provides a long-lasting and inexpensive solution for tile installation. KeedeRoll™ 100 is an ideal product for plywood substrates providing reinforcement and strength.

KeedeRoll™ 300 is a waterproof uncoupling mat that provides a long-lasting and inexpensive solution for tile installation. KeedeRoll™ 300 is an ideal product for plywood substrates providing both reinforcement and water protection using a laminate water resistant fabric.

KeedeRoll™ MT combines our patented Muffling Technology with our uncoupling KEEDE technology to create a quiet yet durable subfloor. A fast, durable solution to protect tile and reduce unwanted noise in one roll!

GSL® K2.6 gypsum cement is an underlayment designed to provide code compliance in wood and concrete UL fire rated assemblies. It is listed on numerous UL designs and has been shown in laboratory testing to provide compliance with IBC standards in impact noise (IIC, ASTM E492) and airborne noise (STC, ASTM E90).

Pumpable, GSL delivers high strength, good water resistance and outstanding performance when placed after drywall in typical multi-family projects, while in some instances prior to drywall. GSL allows for light foot traffic shortly after placement.

Applications from 0.375" up to 3" depth can be achieved in a single pour. GSL remains placable for nearly 30 minutes, yet will withstand light foot traffic at any depth in about 90 minutes. This product offers high density, yet has less finished weight and more flexibility than portland cement self-levelers. Unlike portland cement, gypsum does not shrink and requires no hand finishing tools other than a darby that establishes thickness and uniformity. Typically installed with a specialty mixing machine capable of placing 20,000 to 30,000 square feet per day. GSL K2.6 is specially formulated to add mass to a floor ceiling assembly and help control airborne noise.

GSL is UL approved on all standard assemblies providing developers the fire safety assurance required in today's multi-family projects.

GSL is designed for installation by trained contractors from DEPENDABLE, LLC. Please consult with a local representative for a list of contractors in a specific geography.

Pumpable, GSL delivers high strength, good water resistance and outstanding adhesion. Applications from nearly a featheredge up to 3" depth can be achieved in a single pour. GSL remains flowable for nearly 30 minutes, yet will withstand foot traffic at any depth in about two hours. This product offers high density, yet less finished weight and more exibility than portland cement self-levelers.

Unlike portland cement, gypsum does not shrink and requires no hand finishing tools other than a darby that establishes thickness and uniformity. Typically installed with a specialty mixing machine capable of placing 20,000 to 30,000 square feet per day. GSL M3.4 is specially formulated to add mass to a floor ceiling assembly and help control airborne noise.

GSL is UL approved on all standard assemblies providing developers the fire safety assurance required in today's multi-family projects.

GSL is designed for installation by trained contractors from DEPENDABLE, LLC. Please consult with a local representative for a list of contractors in a specific geography.

Driwall™ Rainscreen 013 is Keene's thinnest drainage mat for exterior wall systems. Same great Rainscreen product, but now can fit your thinner application needs. The entangled net product eliminates incidental moisture problems in most exterior veneer applications, including stucco, manufactured stone, and plank siding.

Keene Driwall™ Rainscreen surpasses the 2021 IRC Exterior Plaster (stucco) code change with its remarkable drainage efficiency of over 90% according to ASTM E2273 & Annex 2 of ASTM E2925.  This high-performance feature will allow our thinnest mat, Driwall™ Rainscreen 013-1 (1/8") to be code compliant in Moist (A) and Marine (C) Climates Zones. (R703.7.3.2 – 2021 IRC).  Also compliant in Dry (B) Climate Zone. 

Driwall™ Rainscreen is a drainage mat for exterior wall systems. The entangled net product eliminates incidental moisture problems in most exterior veneer applications, including stucco, manufactured stone, and plank siding.

Driwall™ Rainscreen is a drainage mat for exterior wall systems. The entangled net product eliminates incidental moisture problems in most exterior veneer applications, including stucco, manufactured stone, and plank siding.

Driwall™ Rainscreen is a drainage mat for exterior wall systems. The entangled net product eliminates incidental moisture problems in brick and natural stone applications.

Driwall™ Rainscreen UV is a drainage mat with long term UV resistance for exterior wall systems. The entangled net product has UV stable fabric and strength bars to increase compression resistance. 

Simplify your installation process and reduce your labor costs while boosting the thermal performance and energy efficiency of your building envelope with this premier product offering.

Driwall™ LathNet combines galvanized metal lath with a polyethylene drainage mesh, providing a two-in-one solution that simplifies the installation process for stucco and thin-stone veneer systems. This integrated approach ensures both robust mechanical bonding for your plaster or stucco and superior drainage and ventilation.

Provides a continuous drainage plane behind rainscreen systems to helps keep stucco, stone, brick and siding-veneered buildings dry

WallNet® allows moisture to easily flow to the weeps, promotes drying to help prevent mold growth and moisture damage, and can help extend the life of siding materials by helping them dry from the back.

Weep holes or a weep screed must be used with WallNet to allow effective moisture drainage and wall drying. Use WeepVent or CellVent to help keep weep holes open and prevent insects from entering the cavity through the weeps.

Protect Your Walls with Driwall™ Drainable Housewrap for Superior Moisture Management and Breathability

Driwall™ Drainable Housewrap is a crucial component in modern construction, designed to protect walls from moisture while allowing internal vapor to escape. Made from synthetic materials, it features a Type II Housewrap with tiny spacers to create a drainage space between the wrap and the wall sheathing. Installed beneath the exterior siding, it overlaps and seals at seams for maximum effectiveness. The importance of Driwall™ Drainable Housewrap lies in its moisture management capability. It prevents water accumulation inside wall cavities, reducing the risk of water damage and mold growth. Additionally, its breathability is key for maintaining indoor air quality and preventing internal condensation.

Viper CDR Vent™ is a drainage and ventilation mat designed to eliminate moisture and moisture vapor in roofing and siding applications. It is useful in cedar shingle/shake roofing and siding where a clean airspace is desired for ventilation and drainage.

Keep Weep Holes Open, Insects and Debris Out

WeepVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can't enter the cavity through the weep holes.  The product's compressibility means it can completely fill the weep holes, and “prickly adhesion" holds the WeepVent in place without fasteners or adhesives.

Available Colors: Brown, Tan, Red, Almond, White, Gray, Black, and Pebble

Commercial Weep Screed for Masonry Cavity Walls

Driwall™ Weep Screed is as a flashing & weep designed to be used with a water-resistive barrier, or building paper, & Driwall™ Rainscreen. The unique “V"-shape allows migration of moisture down the screed and away from the wall. Colors include: gray, tan & white.

Driwall Weep Screed is required by all major building codes & the International Building Code at the bottom of all framed walls.

ViperVent™ CDR is a drainage and ventilation mat designed to eliminate moisture and moisture vapor in roofing and siding applications. It is useful in cedar shingle/shake roofing and siding where a clean airspace is desired for ventilation and drainage.

ViperVent™ CDR Vent 60' | Part #: 01-X-0006
ViperVent™ CDR Vent 50' | Part #: 01-X-0007
ViperVent™ CDR Vent 10MM | Part # : 01-X-0156

A Ridge Vent for a Durable Roof

ViperVent™ Rolled Ridge is Keene Building Products' specialized solution within the Ridge Vent Solutions category, designed to optimize roof ventilation across various roofing systems.

This product stands out for its patented lightweight design and exceptional performance, offering 15 square inches of net free vent area per linear foot to effectively remove excess heat and moisture from attic spaces. Manufactured with UV-resistant, extra thick filter fabric, the Viper Ridge Vent™ ensures clog-free operation and superior airflow for the life of the roof.

Its innovative double density edge design provides unmatched strength and rigidity, maintaining a low-profile look that blends seamlessly with the roofline.

Available in three widths and lengths, this versatile venting solution is compatible with asphalt, wood, tile, metal, and slate roofs, making it a virtually invisible yet powerful component of any roofing system.

7″ Roll Part #: 01-X-0089
9″ Roll Part #: 01-X-0093
9″Stick Vent Part #: 01-X-0090
11″ Roll (36) Part #: 01-X-0091
11″ Stick Vent Part #: 01-X-0092
11″ Roll (16) Part #: 01-X-0094

Fast, Durable, Polymer  Ridge Vent

ViperVent™ Nail-And-Go by Keene Building Products is a durable, high-performance extruded ridge vent system built for fast installation and long-term reliability. It is available in two configurations with 12 or 18 square inches of Net Free Vent Area (NFVA) per linear foot to meet various ventilation requirements.

Molded from a rigid polymer, this vent delivers consistent airflow and a sleek, uniform appearance. The 13.5″ width and 4′ stick format allow for quick layout and installation. Built-in nailing pockets ensure compatibility with any standard nail gun, speeding up the process while improving accuracy. An external baffle helps deflect weather and debris while enhancing overall performance in high wind or storm-prone environments.

ViperVent™ Nail-And-Go is also engineered with subtle end projections that accommodate expansion and contraction, helping maintain its placement and profile over time. Lightweight yet structurally sound, it's a dependable solution for asphalt shingle, wood shake, slate, tile, and metal roofing systems.

12 NFVA Nail-and-Go Part #: 01-X-0212
18 NFVA Nail-and-Go Part #: 01-X-0213

Successfully used in Flood Repair and Renovation

The Driwall™ Hydronic Buffer Mat (HBM) 075-1 MC is an innovative solution for moisture and moisture vapor management in the rehabilitation of brick constructions. This 0.75-inch-thick drainage and ventilation mat combines the resilience of an extruded polymer matrix with a breathable textile non-woven fabric, creating a barrier that enhances the building's interior environment. Designed specifically for rehab and restoration projects involving brick construction, the Driwall HBM 075-1 MC is ideal for applications where maintaining low moisture content and high R-Values is crucial. Its unique composition not only allows for efficient drainage and ventilation but also withstands the high temperatures generated by the curing process of closed-cell spray foam, ensuring durability and performance.

Thickness: 0.75 Inches / 19 mm

• 01-X-0098: Driwall HBM 025-1 | 10 per pallet

• 01-X-0099: Driwall HBM 040-1 | 8 per pallet

• 01-X-0008: Driwall HBM 075-1 | 8 per pallet

A Rollable Furring Strip

Easy-Fur™ is a rollable furring strip that simplifies installation for wood, vinyl, and metal siding, ensuring a consistent cavity space for drainage and ventilation behind cladding. Designed to replace wood furring strips, this product prevents moisture buildup, mold growth, and material decay.

By providing uniform separation between cladding and sheathing, which allows air and moisture to circulate freely, Easy-Fur™  reduces the risk of water damage and enhances the wall's thermal performance. Its durable, nylon construction withstands environmental stresses, maintaining its shape and function over time. Additionally, Easy-Fur™ is compatible with various siding materials, such as Hardie Board, offering flexibility in design and application. 

This adaptability, combined with its moisture management capabilities, makes it an essential component for ensuring a healthy lifespan of the exterior wall systems in diverse climates.

Part #: 01-X-0030 – Width: 4″ (102 mm) | Length: 25′ (7.62 m) | Thickness: 3/8″ (10 mm)

A Lightweight & Easy to Install Furring Strip

Feather-Fur™ is an essential component for modern construction, designed to optimize moisture management and airflow behind various types of siding. By creating a dedicated ventilation and drainage space, Feather-Fur™  helps protect building structures from moisture accumulation, which can lead to mold, mildew, and structural damage.

Its innovative design ensures that water is effectively channeled away, while still allowing air to circulate, enhancing the overall durability of exterior cladding systems. Made from durable materials, Feather-Fur™  is lightweight and simple to install. Feather-Fur™  helps create a healthier, longer-lasting building envelope by enhancing moisture protection and airflow.

Driwall Feather Fur Part #: 01-X-0203 | 192 Linear Ft per Bundle | 56 Bundles
Driwall Feather Fur PS Part #: 01-X-0211 | 192 Linear Ft per Bundle | 56 Bundles (Bundle = 48; 4′ sticks)

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/013 is a 0.13-inch, “zig-zag" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/025 is a 0.25-inch, “zig-zag" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

Drainage Mat for Eliminating Hydrostatic Pressure

DriwallTM Prefabricated Composite Drain 10/045 is a 0.45-inch, square grid geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

The product is produced from an extruded polymer matrix of tangled monofilaments, which are heat-welded at the junctions to form a resilient structure. This product utilizes a non-woven geotextile filter fabric to hold the soil or concrete away from the wall or deck and the core.

When using Driwall Prefabricated Composite Drain, aggregate for drainage can be eliminated from a construction site.

High-Performance Drainage Mat 

TriDent™ DD is a high-performance drainage mat engineered to relieve hydrostatic pressure by creating an exit channel for liquid water. Utilizing a two-layer system, TriDent™ DD provides the user with a high-strength product used for applications in both below-grade foundations and foundation walls. The first layer is  constructed of a high strength, moisture impermeable, cuspated (dimpled) polystyrene sheet designed to provide superior compressive strength. Adhered to the high strength, cuspated polymer base is a nonwoven, polypropylene filter fabric. The filter fabric works in conjunction with the HIPS sheet to promote a high-water flow while preventing silt, dirt, and concrete from penetrating the drainage channel. 

High-Performance Drainage Mat 

TriDent™ DD is a high-performance drainage mat engineered to relieve hydrostatic pressure by creating an exit channel for liquid water. Utilizing a two-layer system, TriDent™ DD provides the user with a high-strength product used for applications in both below-grade foundations and foundation walls. The first layer is  constructed of a high strength, moisture impermeable, cuspated (dimpled) polystyrene sheet designed to provide superior compressive strength. Adhered to the high strength, cuspated polymer base is a nonwoven, polypropylene filter fabric. The filter fabric works in conjunction with the HIPS sheet to promote a high-water flow while preventing silt, dirt, and concrete from penetrating the drainage channel. 

A Ventilation Mat for Green Roof Vegetation

N-Vire™ Mat 040-1 and 075-1 are multi-functional products comprised of a structured strand core and filter-fabric that can either assist with root entanglement & soil reinforcement or act as a moderate or high-flow drainage product in your green roof assembly or landscaping application.

When used with the filament-side up, the product assists with root entanglement and soil reinforcement, allowing roots to grow into and become tangled with the 3-dimensional polymeric core. This feature facilitates the easy transportation of vegetation from one place to another. Alternatively, when installed with the fabric side up, the mat creates a 0.40″ to 0.75″ thick air-space, enabling incidental moisture to drain away and ventilate out effectively."

N-Vire™ Mat 040-1: Part # 01-X-0149 | Thickness: 0.40 Inches / 10.2 mm
N-Vire™ Mat 075-1: Part # 01-X-0149 | Thickness: 0.75 Inches / 19 mm

High-Performance, Seamless Waterproofing for Any Condition

Aqua-Shield™ 100 is a premium, cold-applied, single-component, non-asphaltic, liquid waterproofing membrane. It is a moisture-curing, elastomeric barrier designed for horizontal, vertical, and specialty applications, making it an ideal solution for both above and below-grade construction. Aqua-Shield™ 100 is formulated with 100% solids content, ensuring no shrinkage during curing, and has extremely low VOCs, making it environmentally safe and compliant with the most stringent green building standards.

Self-Adhesive Waterproofing Membrane

Driwall™ Membrane 60 Mil (1.5 mm thick) is a self-adhering flashing and waterproofing membrane. It provides a self-adhered waterproofing membrane in above and below grade applications such as concrete foundation walls, plaza decks, balconies, tunnels and breezeways.

Thickness: 60 mil / 1.5 mm

• Driwall™ Membrane 60 Mil – 12″ | Part #: 01-X-0045

• Driwall™ Membrane 60 Mil – 36″ | Part #: 01-X-0046

Keene Root Barrier is a high-density polyethylene sheet (20-mil or 30-mil), that effectively arrests root penetration and redirect roots to a horizontal growth plane.

Root Barrier 20-mil: 773 sqft. | Part #: 01-X-0143
Root Barrier 30-mil: 773 sqft. |  Part #: 01-X-0144

Self-Adhesive Air and Vapor Barrier

Driwall™ Membrane 40 mil thick (1.0 mm) is a self-adhering flashing and waterproofing membrane. It provides an air and vapor barrier for full wall, or flashing applications in masonry, wood, or gypsum construction. This highly adhesive, 40 mil membrane, insures air and vapor protection.

Thickness: 40 mil / 1 mm

• Driwall™ Membrane 40 Mil – 12″ | Part #: 01-X-0042

• Driwall™ Membrane 40 Mil – 18″ | Part #: 01-X-0043

• Driwall™ Membrane 40 Mil – 24″ | Part #: 01-X-0196

A Multipurpose Sealant

KeeneSeal 100 is a one component, fast grab, multipurpose silyl-terminated polyether (hybrid) elastomeric sealant. When fully cured, this unique VOC compliant formula offers spectacular stress-free adhesion to Driwall™Membrane, PVC, concrete, masonry, painted surfaces, USB, plywood, metal plus other common substrates. This product is specifically formulated to offer all weather performance to meet today's green building standards.

Meets specifications: ASTM C920 Type S, Grade NS, Class 25, Use NT, A, M.

KeeneFlash™ is a versatile, high performance construction tape specifically engineered to provide superior adhesion to a wide variety of substrates throughout the building envelope. KeeneFlash is manufactured from a highly conformable polymetric film and a high-performance acrylic adhesive. 

This combination produces an extremely flexible tape with excellent peal and tack properties with superior nail sealability. 

KeeneFlash's unique design makes it the go-to flashing and repair tape on the modern job site. Whether used as a window & door wrap, roof deck tape, joint & transition tape, roof repair tape, whatever your building envelope needs KeeneFlash has it covered. With its outstanding performance, easy of handling, UV stability, and wide variety available widths KeeneFlash is the Duck Tape® for the building envelope.

A Solvent-based Adhesive

Driwall™ Membrane Adhesive is a fast-drying solvent release adhesive. Designed to require a minimum amount of mixing before applications.

Formulated to have outstanding performance with all Keene Driwall Membrane products, Driwall Membrane Adhesive will also work with most asphalt based waterproofing membranes.

Radon, Moisture & Vapor Intrusion Mitigation System

VaporMat™ is highly adaptable venting system used to collect radon, moisture and other toxic vapors coming from the soil around a house and direct them toward an exhaust stack, which leads them safely out through the roof. 

It works effectively as part of a passive soil depressurization system (PSD) or a fan can be added to the exhaust stack for an active soil depressurization system (ASD).

Thickness: 1.1 Inches / 26.7 mm

• VaporMat™ 040 | Part #: 01-X-0130

• VaporMat™ 1-16 | Part #: 01-X-0088

Helps Keep Cavity Walls Dry and Flashings Functioning Properly

Mortar dropping device that helps prevent mortar droppings from blocking the weeps.

In masonry cavity walls, mortar collection above the flashing and weep hole levels is vital for proper masonry wall performance and to prevent water damage. In today's walls, it's common to see a 2" cavity reduced to the minimum requirement of 1" with the inclusion of insulation, so the need for better ventilation is essential to keep the wall dry and trouble-free. MortarNet WallDefender suspends mortar droppings above the flashing and weeps, so they stay clear and unobstructed. Its NEW design using a structural strand polymer mesh allows moisture to flow to the weeps and significantly greater airflow within the cavity to promote drying.

The Cav-Air-Ator® is a full wall drainage and ventilation mat for full brick or stone masonry walls. It prevents mortar from entering the cavity, clinging to wall ties, or blocking weep holes. The innovative design of the Cav-Air-Ator allows it to be extremely light and flexible so it can easily rest on top of the brick ties.

Mortar Dropping Collection Device, The Keystone Cut

Driwall™ Mortar Deflection from is a masonry drainage device designed to catch and hold mortar droppings. It can be used for both commercial and residential projects to allow moisture to pass through masonry and stone cavity walls. Debris is collected above the flashing and below the face of the interior wall, in order to allow moisture to flow through to the weep holes. Driwall™ Mortar Deflection does not absorb water, and prevents mold.

Mortar Deflection 0.50-040: Part #: 01-X-0009 | Thickness 0.375 Inches / 9 mm
Mortar Deflection 1.0-075:  Part #: 01-X-0010 | Thickness: 0.8 Inches / 20 mm
Mortar Deflection 2.0-160: Part #: 01-X-0097 | Thickness: 1.60 Inches / 41 mm

Helps Keep Homes with Masonry Cavity Walls Dry

In residential masonry cavity walls, mortar collection above the flashing and weep hole levels is vital for proper masonry cavity wall performance and to prevent water damage. HouseNet suspends mortar droppings above the flashing and weeps so they stay clear and unobstructed. Its 90% open mesh allows moisture to flow to the weeps and air to move within the cavity to promote drying.  By using HouseNet for mortar suspension and collection, residential cavity walls perform the way they're designed and walls stay dry and trouble-free.

Residential HouseNet available in 3/8″ and 1″

The Original Mortar Dropping Collection Device

Over 30 years in the industry. Over 100 Million feet installed. Not a single wall failure.

In masonry cavity walls, mortar collection above the flashing and weep hole levels is vital for proper masonry cavity wall performance and to prevent water damage. In today's walls, it's common to see a 2" cavity reduced to the minimum requirement of 1" with the inclusion of insulation, so the need for better ventilation is essential to keep the wall dry and trouble-free. MortarNet™ with Insect Barrier™ suspends mortar droppings above the flashing and weeps, so they stay clear and unobstructed. The patented Insect Barrier helps deter insects from entering the cavity through the weep holes. Its NEW design using a structural strand polymer mesh allows moisture to flow to the weeps and significantly greater airflow within the cavity to promote drying.

Patented, Dual-Layered Mortar Collection Device with Compressibility for Inconsistent Cavity Widths

MortarNet® Ultra suspends mortar droppings above the flashing and weeps, so they stay clear and unobstructed. The patented dual layers help provide compressibility within inconsistent cavity widths, while maintaining the drainage and ventilation you can expect from a MortarNet product.

Preformed 14″ High Corner Boots and Preformed End Dams

Tough and Rugged. Only available from Mortar Net Solutions™.

MortarFlash™ 20-Mil PVC is a non-reinforced polyvinyl chloride (PVC) thru-wall flashing membrane designed for use as a low-cost alternative in concealed flashing applications.

When the use of prefabricated accessories is not feasible, MortarFlash™ 20-Mil PVC can be used to create inside and outside corners.

MortarFlash™ Non-Asphaltic flashing is a 40-mil, polyethylene blend peel-and-stick flashing membrane with applications to masonry, concrete, steel, gypsum, and wood.

When the use of prefabricated accessories is not feasible, MortarFlash™ Non-Asphaltic can be used to create inside and outside corners.

MortarFlash™ 40-Mil Rubberized Asphalt is a prefabricated self-adhering sheet-type waterproofing membrane composed of a high-tensile polyester film that is coated with a layer of specially formulated rubberized asphalt adhesive. MortarFlash adheres aggressively to most clean, dry substrates including metal, wood, vinyl and masonry.

Available in 12″, 18″ & 24″

Keep Weep Holes Open, Insects and Debris Out

WeepVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can't enter the cavity through the weep holes.  The product's compressibility means it can completely fill the weep holes, and “prickly adhesion" holds the WeepVent in place without fasteners or adhesives.

Available Colors: Brown, Tan, Red, Almond, White, Gray, Black, and Pebble

Keep Weep Holes Open, Insects and Debris Out

CellVent is an economical weep hole protection for masonry cavity walls that helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can't enter the cavity through the weep holes.

Available in Black, Brown, Cocoa, Tan, Gray, White, Clear

Accessory for the TotalFlash® Cavity Wall Drainage system

Mortar Net Solutions' stainless steel inside & outside corners, and universal end dams help protect from moisture penetration at corners and end of runs in flashing installations. They are manufactured from 26-gauge Type 304 stainless steel for excellent durability and are soldered at joints to ensure leak-proof seams.

Install these flashing accessories under the flashing membrane being used. Their 26-gauge profile will allow for a smoother transition as opposed to field fabricated corners and end dams made from 40 or 60 mil flashing materials.

Type 304 stainless steel – ASTM A 240, ASTM A 666, ASTM A 480, ASTM A 167

Mortar Net's termination bars are available in PVC, stainless steel, and Aluminum. Mortar Net always recommends mechanically fastening termination bars at the top of flashing installations to help prevent moisture from getting trapped behind the flashing.

Accessory for the TotalFlash® Cavity Wall Drainage system

Mortar Net's drip edge's are available in stainless steel, cold-rolled copper, and four colors of Kynar-coated galvanized steel. All come with a 3/8" hemmed edge to create clean-looking edges during installation. Combine with our metal corner drip edges to complete the installation.

Accessory for the TotalFlash® Cavity Wall Drainage system

Mortar Net Solutions offers metal drip edge corners that match the profile of our drip edge to help maintain the functionality of the flashing installation while creating a clean-looking corner every time.

Synthetic Rubber Sealant

BTL-1 is a synthetic rubber sealant that is ideal for most construction applications.  It produces high-performance joints with both high strength and elasticity.  BTL-1 bonds aggressively to steel, aluminum, ceramics, wood, Kynar® -coated metal, glass, fiberglass and many plastics.

Tube Size: 10.3 Oz | Tubes/Case: 12

Cuts flashing system installation time. Helps keep veneer walls dry. Specified in over 1,500 projects. Over 1 million feet of TotalFlash sold.

The patented TotalFlash Cavity Wall Drainage Solution is a complete, factory-assembled masonry cavity wall flashing system that cuts labor costs and provides better performance than standard through wall flashing. It combines a flashing membrane with a mortar dropping collection drainage mat, weep tabs, drip edge and termination bar into a single, easy-to-install panel.

TotalFlash is suitable for use at all flashing locations, including base of wall, above exterior wall openings and bond beams, in parapet walls, and wherever flashing is desirable.

And TotalFlash is more than just a product.  Every TotalFlash job includes free services to help make purchasing and installation headache-free, including expert takeoffs, bid help and custom panel sizing for wall openings.

Cuts flashing system installation time.  Helps keep veneer walls dry. Over 1 million feet of TotalFlash sold.

The patented TotalFlash Roll Cavity Wall Drainage Solution is a factory-assembled masonry cavity wall flashing system that provides better performance than standard through wall flashing.  It combines a flashing membrane, mortar dropping collection drainage mat, and drainage mesh weep tabs into a single, easy-to-install 50′ roll.  It provides superior moisture protection, slashes labor costs, and can be custom configured for your job, usually at no additional charge.

Sold in 50′ rolls
18″ standard height.  12″, 24″, and other custom heights available upon request

Flashing Solution for Single Wythe Concrete Masonry Unit Walls

A continuous drainage system with stainless steel drip edge. The only system that can be installed post-construction.

The BlockNet CMU single wythe flashing solution reliably protects CMU walls from water infiltration damage by enabling moisture to easily drain from the block cell interiors to the building exterior.

Water in the block cells flows down the inside of the face of the cells through the BlockNet vertical mesh component and onto the horizontal stainless steel drainage section, which channels water out of the wall through the integrated horizontal drainage mesh element and drainage tabs.

The Complete Flashing Solution for Single Wythe Concrete Masonry Unit Walls

BlockFlash is a complete, embeddable flashing solution for managing moisture in exterior single wythe CMU walls. It uses patented flashing pans to collect moisture in the wall and channel it to the exterior through integrated weep spouts. Its included drainage mesh provides hundreds of clear pathways for water to flow around mortar droppings inside the block cells so it can be collected by the pans.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall Prefabricated Composite Drain products are drainage mats designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies. A filter fabric is heat-laminated to one side of the mat to hold soil or concrete away from the wall or deck and keep the drainage plane clear. When using Driwall™ Prefabricated Composite Drain, aggregate for drainage can be eliminated from the construction site.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/013 is a 0.13-inch, “zig-zag" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/013-2 is a 0.125-inch, “zig-zag" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

The product is produced from an extruded polymer matrix of tangled monofilaments, which are heat-welded at the junctions to form a resilient structure. This product utilizes a non-woven geotextile filter fabric to hold the soil or concrete away from the wall or deck and the core.

When using Driwall™ Prefabricated Composite Drain, aggregate for drainage can be eliminated from a construction site.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/025 is a 0.25-inch, “zig-zag" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

Drainage Mat for Eliminating Hydrostatic Pressure

Driwall™ Prefabricated Composite Drain 10/025-2 is a 0.25-inch, “ZIG-ZAG" geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters and plaza decks, while providing an
impermeable membrane surface for the face of the structure.

The product is produced from an extruded polymer matrix of tangled monofilaments, which are heat-welded at the junctions to form a resilient structure. This structure utilizes a filter fabric to hold the soil
away from the wall and core. A fabric is heat-laminated to the surface on one side so that in one step, aggregate for drainage can be eliminated from a construction site.

On the other side of the drain's three-dimensional core, an additional filter-fabric is adhered. This secondary fabric will act as a plane to stop moisture penetration to the foundation and in one step, provide drainage and protection to your waterproofing mebrane, or double-sided drainage in landscape applications.

Drainage Mat for Eliminating Hydrostatic Pressure

DriwallTM Prefabricated Composite Drain 10/045 is a 0.45-inch, square grid geometric patterned core, drainage mat designed to eliminate hydrostatic pressure from behind foundation walls, retaining walls, planters, plaza decks, and balconies.

The product is produced from an extruded polymer matrix of tangled monofilaments, which are heat-welded at the junctions to form a resilient structure. This product utilizes a non-woven geotextile filter fabric to hold the soil or concrete away from the wall or deck and the core.

When using Driwall Prefabricated Composite Drain, aggregate for drainage can be eliminated from a construction site.

High-Performance Drainage Mat

TriDent® DD is engineered to manage water with precision, relieving hydrostatic pressure and protecting below-grade structures. Its two-layer design combines a moisture-impermeable, dimpled polystyrene sheet for superior compressive strength with a polypropylene filter fabric that ensures high water flow while blocking silt and debris. Lightweight yet durable, it installs easily while maintaining long-term performance. By creating an air gap between the foundation wall and waterproofing membrane, TriDent® DD reduces water contact, prevents leaks, and safeguards structural integrity. Ideal for foundations, under-slab drainage, balconies, planters, plaza decks, and green roofs.

High-Performance Drainage Mat 

TriDent® DD is engineered to manage water with precision, relieving hydrostatic pressure and protecting below-grade structures. Its two-layer design combines a moisture-impermeable, dimpled polystyrene sheet for superior compressive strength with a polypropylene filter fabric that ensures high water flow while blocking silt and debris. Lightweight yet durable, it installs easily while maintaining long-term performance. By creating an air gap between the foundation wall and waterproofing membrane, TriDent® DD reduces water contact, prevents leaks, and safeguards structural integrity. Ideal for foundations, under-slab drainage, balconies, planters, plaza decks, and green roofs.

• N-Vire™ Mat 040-1: Part # 01-X-0040 | Thickness: 0.40 Inches / 10.2 mm

• N-Vire™ Mat 075-1: Part # 01-X-0041 | Thickness: 0.75 Inches / 19 mm
  
  

A Ventilation Mat for Green Roof Vegetation

N-Vire™ Mat 040-1 and 075-1 are multi-functional products comprised of a structured strand core and filter-fabric that can either assist with root entanglement & soil reinforcement or act as a moderate or high-flow drainage product in your green roof assembly or landscaping application.

When used with the filament-side up, the product assists with root entanglement and soil reinforcement, allowing roots to grow into and become tangled with the 3-dimensional polymeric core. This feature facilitates the easy transportation of vegetation from one place to another. Alternatively, when installed with the fabric side up, the mat creates a 0.40″ to 0.75″ thick air-space, enabling incidental moisture to drain away and ventilate out effectively."

• Root Barrier 20-mil: 773 sqft. | Part #: 01-X-0143

• Root Barrier 30-mil: 773 sqft. |  Part #: 01-X-0144
  
  

Keene Root Barrier is a high-density polyethylene sheet (20-mil or 30-mil), that effectively arrests root penetration and redirect roots to a horizontal growth plane.

Aqua Balance Mat: Part # 01-X-0194 | Thickness: 0.75 Inches (10 mm) | Dimensions: 4' x 75', 300ft.² | Units/Pallet: 10 rolls / pallet

High-Performance Water Retention & Drainage Solution

Keene Building Products' Aqua Balance Mat is an innovative water retention and drainage mat engineered to optimize green roof performance and enhance your project's sustainability. Designed with a proprietary blend of 100% recycled, low/mid-denier fibers, this mechanically bonded needled felt mat enhances capillary action for efficient water absorption and distribution, ensuring consistent moisture availability for rooftop vegetation.

Built for durability, flexibility, and long-lasting performance, Aqua Balance Mat is a sustainable solution made from 100% recycled materials. It improves stormwater management, mitigates urban heat island effects, and supports biodiversity in green roof applications.

High-Performance, Seamless Waterproofing for Any Condition

Aqua-Shield™ 100 is a premium, cold-applied, single-component, non-asphaltic, liquid waterproofing membrane. It is a moisture-curing, elastomeric barrier designed for horizontal, vertical, and specialty applications, making it an ideal solution for both above and below-grade construction. Aqua-Shield™ 100 is formulated with 100% solids content, ensuring no shrinkage during curing, and has extremely low VOCs, making it environmentally safe and compliant with the most stringent green building standards.

Durable Clear Flashing Tape for Lasting Seals

KeeneFlash 300 is a clear butyl flashing tape designed for sealing building penetrations (such as windows, doors, dryer vents, utility pipes, etc.) The aggressive butyl adhesive system produces a permanent seal to protect buildings from air and water infiltration. The backing is a flat film construction that provides strength and durability against rips, tears and punctures.

KeeneFlash's unique design makes it the go-to flashing and repair tape on the modern job site. Whether used as a window & door wrap, roof deck tape, joint & transition tape, roof repair tape, whatever your building envelope needs KeeneFlash has it covered. With its outstanding performance, easy of handling, UV stability, and wide variety available widths KeeneFlash is the Duck Tape® for the building envelope.

A Multipurpose Flashing & Repair Tape

KeeneFlash™ is a versatile, high performance construction tape specifically engineered to provide superior adhesion to a wide variety of substrates throughout the building envelope. KeeneFlash is manufactured from a highly conformable polymetric film and a high-performance acrylic adhesive. 

This combination produces an extremely flexible tape with excellent peal and tack properties with superior nail sealability. 

KeeneFlash's unique design makes it the go-to flashing and repair tape on the modern job site. Whether used as a window & door wrap, roof deck tape, joint & transition tape, roof repair tape, whatever your building envelope needs KeeneFlash has it covered. With its outstanding performance, easy of handling, UV stability, and wide variety available widths KeeneFlash is the Duck Tape® for the building envelope.