Plastic, single use round forms for cast-in-place concrete applications including the following: ** NOTE TO SPECIFIER ** Delete applications not required. Concrete piers and footings. Concrete light pole bases. Concrete pour-in-place bollards. MANUFACTURERS Acceptable Manufacturer: ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions. Substitutions: Not permitted. Requests for substitutions will be considered in accordance with provisions of Section . ** NOTE TO SPECIFIER ** Delete paragraph below if no Standard Ceme-Tube required for Project. CONCRETE PIER FORMS Round HDPE Plastic Forms for Piers and Footings: Standard Ceme-Tube by Ceme-Tube with the following characteristics: Material: Heavy duty seamless HDPE plastic, impervious to moisture, friction frost heave, and job site abuse. Appearance: Uniform smooth appearance, without spiral form lines. Length: All diameters are 4 feet (1219 mm). in length. All models have an integral collar to allow stacking together for additional length.. ** NOTE TO SPECIFIER ** Delete options below not required. Diameter: 8 inch (203 mm). Diameter: 10 inch (254 mm). Diameter: 12 inch (305 mm). Diameter: 18 inch (457 mm). Gen2 model with reinforcement ribs to keep round and add structural strength for backfill. Diameter: 24 inch (610 mm). Gen2 model with reinforcement ribs to keep round and add structural strength for backfill. Diameter: 30 inch (762 mm). Gen2 model with reinforcement ribs to keep round and add structural strength for backfill. Diameter: Refer to the drawings. ** NOTE TO SPECIFIER ** Delete below if not required. Domed Cap:Match size of forming tube. ** NOTE TO SPECIFIER ** Delete paragraphs below if no bracing and stacking required. Discuss bracing requirements with manufacturer. Integral Collar for Bracing and Stacking for Form Diameters up to 24 Inches: Integral collar on one end shall allow units to be braced and stacked to produce piers or footings up to 20 feet (6 meters) tall in one pour. Integral Collar for Bracing and Stacking for Form Diameter of 30 Inches: Integral collar on one end shall allow units to be braced and stacked to produce piers or footings up to 12 feet (3.7 meters) tall in one pour. ** NOTE TO SPECIFIER ** The 18 inch model and 30 inch model come in Safety Yellow only, but the 24 inch comes in Safety Yellow, Architectural Bronze, and Concrete gray with granite fleck Delete paragraph below if no Light Pole Ceme-Tube required for Project. LIGHT POLE FOOTING FORMS Round HDPE Plastic Forms for Light Pole Footings: Light Pole Ceme-Tube by Ceme-Tube with the following characteristics: Material: Heavy duty seamless HDPE plastic, impervious to moisture. ** NOTE TO SPECIFIER ** Delete colors not required. Color: Caution Yellow. Color: Architectural Bronze. Color: Concrete Gray with granite fleck. Color: Standard black color on below grade tubes. Heavy duty seamless HDPE plastic, impervious to moisture. Appearance: Uniform smooth appearance, without spiral form lines. Length: All models are 4 feet (1219 mm). All models have an integral collar to allow stacking together for additional length. Gen2 model with reinforcement ribs to keep round and add structural strength for backfill. ** NOTE TO SPECIFIER ** Delete diameter below not required. Diameter: 18 inch (457 mm), with 15 inch (381 mm) diameter hole on top of the tube facilitating pouring, finishing, light pole installation, and reinforcement ribs on the tube for added strength. Diameter: 24 inch (610 mm), with 17 inch (432 mm) diameter hole on top of the tube facilitating pouring, finishing, light pole installation, and reinforcement ribs on the tube for added strength. Diameter: 30 inch (762 mm), with 18 inch (457 mm) diameter hole on top of the tube facilitating pouring, finishing, light pole installation, and with reinforcement ribs for added strength. ** NOTE TO SPECIFIER ** Delete paragraphs below if no bracing and stacking required. Discuss bracing requirements with manufacturer. Integral Collar for Bracing and Stacking for Form Diameters up to 24 Inches: Integral collar on one end shall allow units to be braced and stacked to produce piers or footings up to 20 feet (6 meters) tall in one pour. Integral Collar for Bracing and Stacking for Form Diameter of 30 Inches: Integral collar on one end shall allow units to be braced and stacked to produce piers or footings up to 12 feet (3.7 meters) tall in one pour. ** NOTE TO SPECIFIER ** Delete paragraph below if no Bollard Ceme-Tube required for Project. BOLLARD FORMS Round HDPE Forms for Bollards: Bollard Ceme-Tube with 8 inch (203 mm) diameter by Ceme-Tube with the following characteristics: Material: Reflective yellow color above grade and standard black color below grade, heavy duty seamless HDPE plastic, impervious to moisture. Appearance: Uniform smooth maintenance free appearance, without spiral form lines. Comes with dome cap to finish installation after pouring. Length: 4 feet (1219 mm) above grade yellow tube. Can be made taller by adding additional yellow tubes. Below grade tube is 4 feet (102 mm). Can be made longer by adding additional black below grade tubes. ** NOTE TO SPECIFIER ** Delete options below not required. Dome Cap: Included; match size of forming tube. Finished upon filling with concrete and rebar.