Specifically designed for mid-rise buildings where higher windload requirements and limits to deflection are needed.
Designed to meet the structural capabilities required for buildings up to 20 stories tall or DP of +/-70 psf, the reinforced frame profile where the two folding panels intersect is a mere 5 1/4" (133 mm).
The NW Reinforced 647 is independently certified and rated to meet CW-PG35.
A fundamental benefit of this Generation 4 folding glass wall is energy efficiency. Depending on glass type selected, NW Reinforced 647 offers thermal performance values as low as “.24".
For openings onto balconies, terraces, and rooftops, this reinforced folding glass wall system opens wide to 90% or more and is not restricted as with a traditional slider.
Standard to NW Reinforced 647 is the PowerLock—a pair of locking bolts to the top and to the bottom with approximately a 1" (24 mm) throw for maximum security engagement into the head and floor track.
Build Your Own | 3D CAD, Revit, & Specs Configurator
Performance Results:
Performance Sill
Low Profile Saddle Sill
Low Profile Saddle Sill with UniverSILL
Slimmest and most thermally efficient aluminum frame.
Floor supported systems with stainless steel wheels on stainless steel track.
Largest panel sizes in the Generation 4 product group; with height up to 11′ 6″ (3500 mm).
20% more thermally efficient than other aluminum framed folding systems.
Patented lateral adjustment of +/- 3/16″ (5 mm) to allow for construction tolerance.
Multipurpose frame insert for thermal break, acoustical performance, and streamlined look.
Build Your Own | 3D CAD, Revit, & Specs Configurator
Low Profile Saddle Sill:
Performance Sill
Build Your Own | 3D CAD, Revit, & Specs Configurator |
Single track offers total customization
Unlimited spans, customizable stacking
Unit heights up to 10' 6" (3200 mm) are possible
Sliding panels are available up to 4' 1" (1250 mm) in width
Single/double action sliding panels are available up to 3' 3" (1000 mm) in width
Non-sliding end single/double action panels are available up to 3' 7" (1100 mm) in width
Build Your Own | 3D CAD, Revit, & Specs Configurator
Architectural Binder Section
Performance Overview
