Floor and Wall Coatings
1/16 – 1/4 INCH EPOXY FLOOR SYSTEM
HEF – PB (Pigmented Broadcast) 1/16 – 1/4 Inch Epoxy Flooring System is aesthetically pleasing, 100% solids pigmented epoxy resin and aggregate flooring system. This system is installed at a nominal thickness of 1/16 – 1/4 Inch
RBC Industries' Hallemite floor and wall coating products comprise some of the most innovative polymer technology currently available.
All over the world customers choose to rely on state of the art Hallemite seamless flooring and coating systems to protect, beautify and restore commercial, institutional and industrial facilities.
We have numerous installers we regularly work with to install all Hallemite products.
Hallemite products meet or exceed FDA, USDA, DEP and OSHA standards.
Hallemite Floor and Wall Coatings
EPOXY FLOOR SEAL-COAT SYSTEM
HEF - CC (Clear Coating) Epoxy Floor Seal-Coat System is a chemical resistant, 100% solids, solventless, high build two part epoxy coating. It is designed to reduce dusting and protect concrete slabs while making the surface easy to clean. The Seal-Coat is installed at a nominal thickness of 8 to 20 mils.
1/8" to >1" MORTAR and SLURRY SYSTEM
Black Amazite is a 100% solids epoxy resin and aggregate flooring system which is installed at a minimum thickness of 1/8 Inch >1 Inch for flooring.
1/16 TO 1/4 INCH BROADCAST SYSTEM1/16 TO 1/4 INCH BROADCAST SYSTEM
HEF - CQ (Color Quartz) Broadcast Flooring System is aesthetically pleasing, 100% solids, clear epoxy resin with colored aggregate. This system is installed at a nominal thickness of 1/16 – 1/4 Inch.
3/16 – 1/4 INCH MORTAR SYSTEM
HEF - DOL (Decorative Overlay) UV Light Stable and Chemical Resistant 3/16 to 1/4 Inch Mortar is aesthetically pleasing, 100% solids clear epoxy resin T-Grade or equal aggregate flooring system. It can be installed either by hand trowel or by power trowel at a nominal thickness of 3/16 to 1/4 Inch.
1/16 INCH FLOORING SYSTEM
HEF - EC (Epo-Chip) Decorative Flooring System is 100% solids clear epoxy resin and colored chips that is aesthetically appealing. The colored chips are available in 2mm or 6mm and are installed at a nominal thickness of 1/16 Inch.
1/4 to 3/8 INCH THIN-SET EPOXY TERRAZZO SYSTEM
HEF - ET (Epoxy Terrazzo) Thin-Set System is a pigmented, solventless, 100% solids epoxy matrix that meets or exceeds the NTMA (National Terrazzo and Mosaic Associations, Inc.) published physical properties requirement.
FLEXIBLE FLUID PROOFING EPOXY MEMBRANE ELASTO-FLEX™ SYSTEM
HEF - FM (Flexible Membrane) Elasto-Flex System is a 100% solids, solventless, high build two part epoxy membrane system. It is designed to be placed under Hallemite flooring systems. It is intended to replace solvent containing polyurethane membranes for fluidproofing and crack dampening under flooring systems. It is installed at a nominal 20 to 60 mils, per coat.
1/16 – 1/4 INCH EPOXY FLOOR SYSTEM
HEF – PB (Pigmented Broadcast) 1/16 – 1/4 Inch Epoxy Flooring System is aesthetically pleasing, 100% solids pigmented epoxy resin and aggregate flooring system. This system is installed at a nominal thickness of 1/16 – 1/4 Inch
EPOXY FLOOR SYSTEM
HEF - PC (Pigmented Coating) Epoxy Flooring System is a chemical resistant, 100% solids, solventless, high build two part epoxy coating. It is designed to enhance the appearance and protect concrete. The Coating is installed at a nominal thickness of 8 to 20 mils.
DECORATIVE COLOR QUARTZ 1/8 INCH MORTAR WALL SYSTEM
HEF - CQW (Color Quartz Wainscot) Decorative Color Quartz 1/8 Inch Mortar Wall System is a 100% solids epoxy resin and color quartz aggregate. It is installed at a nominal thickness of 1/8 inch. HEF - CQW Wall Syst
PIGMENTED WALL and CEILING COATING SYSTEM
HEF - WC (Wall Coating) Pigmented Epoxy Wall and Ceiling Coating System is a solventless, 100% solids, two component epoxy coating system. It is available in 16 standard colors, as well as, an infinite number of custom colors.
HEF Epoxy is an all purpose, seamfree, 100% solids epoxy. It can be used as a coating or when combined with colored colorquartz aggregate it provides a decorative and skid-resistant surface.
Control Joint and Non-Structural Crack Filler System
HEF – CONTROL JOINT FILLER is a two component, 100% solids, semi-rigid epoxy. It is designed to reinforce and protect joint nosing and filling nonstructural cracks on interior concrete slabs.
HEF Waterbase Epoxy Primer is a two component 1:1 mix ratio to be used as a primer for Hallemite Flooring Systems. It can also be used as a light duty floor coating/sealer. It forms a thin film sealer epoxy coating and is non-flamable with zero VOC.
HEF Waterbase Acrylic is a clear waterborne acrylic air-dry coating. It provides a tough, scratch resistant, finish with excellent adhesion to most substrates. HEF Waterbase Acrylic has excellent moisture resistance, and is a viable alternative to solvent-based coatings. This product meets current state and federal restrictions on VOC's
HEF UV OPF – UV Light Stable and Chemical Resistant Epoxy is a 100% solids, solventless, high build two part epoxy coating. It is designed to enhance the appearance of the floor substrate while making the surface easy-to-clean.
HEF OTP (Oil Tolerant Primer) is a unique product that has ultra low viscosity and developed to be used as a penetrating primer without additional solvents.
HEF FAST PATCH is a quick setting, filled epoxy. It is designed to be used as patching material on cracks, to fill bug holes as well as divot filling, etc. Enclosed is a sample kit for your evaluation. Please let us know your comments once you have a chance to try the product. If you have any questions, please call.
HEF Elasto-Flex is a unique formulated copolymer surfacing that offers excellent flexibility at low temperatures while maintaining good strength, modulus, and tear resistance. It is a two part, 100% solids (no solvent epoxy resin/hardener) allows a 1:1 formulation/mix ratio. Its resilient nature makes it suitable for flexible flooring joint sealants, crack bridging and secondary containment membranes.
This product is a 100% solids, two component, clear polymer coating that is mixed at a 1:1 ratio by volume. It cures to a clear, high build, glass like finish that resists scratching and yellowing. Items coated with this will become permanently preserved and protected for your enjoyment throughout a lifetime
Black Amazite is a 100% solids epoxy resin and aggregate flooring system which is installed at a minimum thickness of 1/8 Inch >1 Inch for flooring.
HEF Rapid Cure is a low viscosity, all purpose, 100% two part solids epoxy in clear or pigmented. It can be used as a primer or when combined with color quartz aggregate or colored chips, it provides a decorative and skid-resistant surface.
Hallemite 120 Non-Sag Epoxy Paste Adhesive is a two component epoxy bonding agent. It is a structural adhesive designed to transfer loads from one element to another and to be used for general purpose bonding applications. Non-sag properties will be between 1/8" to 1/4" inch depending on the temperature.
HEF UV Water Clear Light Stable and Chemical Resistant Clear Epoxy is a 100% solids, solventless, high build two part epoxy coating. It is designed to enhance the appearance of the floor substrate while making the surface easy-to-clean.
HEF UV Cove Gel Non-Sag Epoxy Paste is a 100% solids, solventless, two component epoxy. It is designed for vertical applications where extra non-sag properties are required. Cove Gel can be used as a primer, a Mortar System and a Sealer, saving on installation time.
HEF UV Light Stable and Chemical Resistant Clear Epoxy is a 100% solids, solventless, high build two part epoxy coating. It is designed to enhance the appearance of the floor substrate while making the surface easy-to-clean.
HEF UV and HEW UV Pigmented are 100% solids, solventless, high build, two-part epoxy for floors and walls. It is durable, abrasion resistant as well as resistant to UV Degradation.
HEF Black Underlayment is a low viscosity, 100% solids, solventless, two part epoxy. It is designed to enhance the appearance of the floor substrate. HEF Black Underlayment can be used as a primer, a concrete repair mortar, a broadcast, a resurfacing screed or a self-leveling slurry system. HEF Underlayment is NOT to be used as a topcoat.
HEF CRD Epoxy Novolac is a 100% solids, solventless, high build two part epoxy coating. It is Chemical Resistant and High Temperature Resistant epoxy. It can be used as a coating or when combined with colored colorquartz aggregate it provides a decorative and skidresistant surface. It enhances the appearance of the floor substrate while making the surface easyto-clean.
HEF CRA Epoxy Novolac is a 100% solids, solventless, high build two part epoxy. It is Chemical Resistant and High Temperature Resistant. It can be used as a coating or when combined with colored colorquartz aggregate it provides a decorative and skid-resistant surface. It enhances the appearance of the floor substrate while making the surface easy-to-clean.
HEF CR Epoxy Novolac is a 100% solids, solventless, high build two part epoxy. It is Chemical Resistant and High Temperature Resistant. It can be used as a coating or when combined with colored colorquartz aggregate it provides a decorative and skid-resistant surface. It enhances the appearance of the floor substrate while making the surface easy-to-clean.
Color Cards
Guideline Instructions For Concrete Substrate Surface Preparationn
Hallemite surface preparation guideline is designed to assist the specifier and contractor in inspection and surface preparation of concrete substrates prior to the placement of a Hallemite polymer system.
Understanding Dielectric, Conductive, and Static Dissipating Epoxy Flooring Systems
Hallemite includes both fluid applied ESD and nonconductive dielectric epoxy flooring systems. ESD epoxy flooring systems for years have been considered to be only functional, but never aesthetically pleasing.
Chemical Resistance Guide
Hallemite Product Lines’ chemical property test data in the reference chart is to serve as a guide only. Field conditions may vary and may cause a different effect, therefore, no guarantee is made nor can Hallemite assume liability in connection with their use.
Maintenance Guideline for Epoxy Flooring Systems
Epoxy floor systems are specified because they protect and beautify and are better than any other flooring products.
Functional non-aesthetic, epoxy floor systems are selected to protect individuals, equipment and substrate from harm. Aesthetically pleasing epoxy floor systems may be required to meet all the physical requirements of a non-aesthetic function epoxy floor, while beautifying the work environment, as well.
Prior to placing an epoxy flooring system, the substrate should be properly sloped-to-drains and trenches and areas prone to puddling should be leveled. Failure to properly slope and level the substrate prior to placing the epoxy flooring system can have a negative effect on drainage and ease-of-cleaning. To level and slope-to-drain use Hallemite HEF OL Underlayment and Slope-to-Drain Mortar System.