The SafetyRail 2000 (SR2K) is a non-penetrating, passive fall protection system for workplace safety in rooftop or ground level applications. Used as a portable or permanent solution, the SafetyRail 2000 System's unique design eliminates the cost and danger of potential trip hazards created by intermediate counterweights used in other guardrail systems. When the 96-pound cast iron bases are installed in a run with a 90-degree return on each end, the combined mass and the geometry of the installation creates an OSHA-compliant barrier for roof edge protection.
The SafetyRail 2000 Guardrail is an OSHA Fall Protection guardrail. OSHA guardrails and roof railings ensure OSHA Compliance using a passive fall protection system. The SafetyRail 2000 Guardrail is part of BlueWater Manufacturing's SR2K system, a non-penetrating, passive fall protection system for workplace safety in rooftop or ground level applications. Used as a portable or permanent solution, the SafetyRail 2000 System's unique design eliminates the cost and danger of potential trip hazards created by intermediate counterweights used in other guardrail systems.
The SafetyRail 2000 has been tested by a nationally-recognized engineering firm and found to be in accordance with OSHA regulations. These regulations are in fall protection for guardrail; sections 1910.23 and sections 1926.500 - 1926.503.
The Architectural Series combines our non-penetrating guardrail system with an architectural appeal for those applications where appearance of the railing is important. The Architectural Series has a pleasing sightline and can enhance the overall appearance of your building while maintaining a fall protection barrier around the roof edge that meets OSHA Regulations. Since the Architectural Series utilizes the same patented, non-penetrating base as the SafetyRail 2000, your roof system will maintain its integrity and not be compromised by having to penetrate the roof surface for installation. The Architectural Series is ideal for new building construction, adding passive fall protection to an existing building or as an addition to existing guardrails.
Architectural Series Cut Sheet
The StealthRail folding guardrail is a collapsible, portable guardrail and safety rail system. Designed with a one-way pivot assembly, the guardrail folds when used on a surface and does not exceed a vertical plane when in the upright position. A detent pin on each pivot assembly locks the safety guard rail in the upright position. When the system is in its folded position, there are clean sightlines from ground level and the building's architectural integrity is preserved.
The SG Series Standing Seam Metal Roof Guardrail offers optimal fall protection for standing seam metal roof applications, providing mandated worker protection for ladder egress/ingress and roof edge fall protection. The SG Series Galvanized Base Plate can be incorporated with BlueWater's Architectural Series Guardrail, SafetyRail 2000 or the PermaLine Warning Line System.
The PermaLine was designed for permanent placement of a Warning Line System for roof edge fall protection. With this innovative system, you will no longer have to make monthly trips to your rooftop to replace torn or worn out plastic flagging. In addition, you will no longer have to inventory the flagging for future replacements. Once in place, the PermaLine remains intact until you want to move it. Best of all, it's a non-penetrating system. The PermaLine (Patent Pending) is the only permanent Warning Line System in the market place. It is not a motion stopping devise. It is a highly visible warning barrier. It exceeds OSHA regulations for warning line systems. Please call us for more details. OSHA has had some recent interpretations on warning line systems. Please visit our OSHA web page for important links regarding the use of warning line systems.
PermaLine Cut Sheet
BlueWater's patent-pending and non-penetrating ParaRail exceeds OSHA regulations and allows workers full access to a leading edge on a flat roof or the roof's parapet. May be used as a permanent solution to a rooftop leading edge or may be moved as needed.
The BlueWater Industrial Self-Closing OSHA Ladder Safety Gate is tough, durable and best of all, economical, reliable, easy to install, and more closely matches the railings and their dimensional requirements provided for by Federal OSHA.
The gate arm is dimensioned to provide maximum opening coverage. When the gate is installed and the top rail is at the OSHA's recommended nominal height of 42", the bottom rail of the gate is positioned at a height of 21". This matches the OSHA mid-rail height for guardrails.
GuardDog Cut Sheet
Our Roof Hatch/Skylight Systems exceeds OSHA Std. 29 CFR 1910.23 and 1910.27. It is the only product available in the market with a gate assembly that meets the same OSHA regulations and requires no drilling into any surface for installation. The Roof Hatch/Skylight Systems set up in minutes and are easily dismantled for roof repair. Sized gates enable the Roof Hatch System to be located within 6 inches of the open roof hatch.
We can configure or custom manufacture to any size hatch. Please contact us for more information.
BlueWater's OSHA-compliant,Skylight screen protection is non-penetrating. The Skylight Defender is specifically engineered to protect against injuries and deaths from falls through skylights. Accommodates diverse skylight protection needs and applications, available in customizable sizes.
Skylight Defender Installation
The BlueWater Hatch Defender is a non penetrating fall protection solution designed specifically for rooftop hatches. Featuring a unique compression attachment system the Hatch Defender installs in minutes without any drilling required and can also be dismantled during maintenance..
Included with every Hatch Defender is a GrabBar and GuardDog self-closing safety gate to completely protect against falls.
For added ease of egress and ingress through roof hatches and floor hatches, BlueWater offers the GrabBar. Easily adjusted to match the width of the ladder inside the hatch or wider if needed.
The Self Closing Gate is optional.
The KwikRail Modular Safety Handrail System offers a lower-cost option for fall protection that exceeds OSHA and BOCA standards. Durable and built to last, the easy-to-install design only requires the use of a hex key.
KwikFit structural pipe fittings are made of malleable iron and are designed to make the building of handrails and pipe structures fast and easy. Using only simple hand tools, complex pipe configurations can be produced quickly and efficiently.
- Expands from 2" to 16"
- Simple and fast compression locking system
- Adjustable guardrail post allows it to comply with OSHA guardrail heights from the work surface
- Install at 8 foot increments
- Use on parapets or decking applications
- Toe Board Brackets are available for deck applications.
- Adaptors for KwikRail are available for permanent placement on buildings
- Tough safety yellow powder coat finish
- Other colors are available to match application requirements
The ParaClamps unique compression locking system makes it simple, economical and fast to install. Simply place the clamp over a parapet and slide the compression plate against the surface, turn the compression rod against the plate and your're finished!
|