An Innovative new product to replace the cardboard forming tube. Made from partially recycled HDPE plastic, and available in 8", 10" 12", 18", 24", and 30" diameters, the new CEME-TUBE will change the way footings and piers are made. This revolutionary new product will eliminate a multitude of problems found with using cardboard forming tubes. The CEME-TUBE will not only take job site and shipping abuse, but it can be installed, completely backfilled, and filled with concrete at any future date. All CEME-TUBEs are 4 foot in length, but with the integral collar on one end, can be stacked to produce piers up to 20' tall in one pour. (12' tall for 30" model) The finished pier will be round, smooth, equal in diameter, and of architectural grade for the entire length. An optional domed cap is available in all sizes to keep rain, dirt, children etc. out of the hole prior to pouring concrete. Standard CEME-TUBE Features: Impervious to moisture, before and after pouring. Eliminates '™Friction frost heaving" in colder climates. Can be installed, completely backfilled, and then filled with concrete at any future date. Can easily handle jobsite and shipping abuse without losing integrity. All models are 4' in length, but can be stacked to achieve 20' tall piers and footings. Molded from partially recycled HDPE plastic and is flexible to -103 deg. F. The Unlike cardboard tubes, the diameters are uniform from one Ceme-Tube to another. Easily cut with common power tools. Easily strippable using a grinder with any type of cutting or grinding wheel. (12' tall for 30" model) Ceme-Tube will not chip or crack when cold. (Note: When stripping, only cut Ceme-Tube approximately 90% through, score inside cut with a utility knife, and tube will split open with minimal effort.) On above ground applications, tubes will not fade, and can be left on for an aesthetic appearance. Works well for underwater dock piers. Will work in conjunction with all Optional domed top caps are available Finished pier will be round, smooth, No more rotating form lines as with manufactured footing bells like Bigfoot for all sizes to keep dirt, rain, children, etc. out of hole prior to pouring. and of architectural grade. cardboard tubes.

This Bollard model CEME-TUBE is designed to provide an easy installation of a maintenance free, pour in place Bollard. The Bollard CEME-TUBE is an 8'™ standard CEME-TUBE molded in night reflective, caution yellow throughout. A strong UV inhibitor will keep the CEME-TUBE from fading. After filling the Bollard CEME-TUBE with re-bar reinforced concrete, the installation is complete. Bollard Ceme-Tube Features: The Bollard Ceme-Tube is 8'™ in diameter, and 4'™ in length. The standard black Ceme-Tube must be used below grade and below the Bollard Ceme-Tube to provide deeper footings and stability for the bollard. Upon filling with re-bar and concrete, the installation is complete. The reflective caution yellow color is molded throughout, not just applied. The reflective caution yellow color is highly visible, especially at night. Molded from partially recycled HDPE plastic and is flexible to -103 deg. F. The Bollard Ceme-Tube will not chip or crack when cold. Concrete or asphalt will not adhere to the sides of the Bollard Ceme-Tube which eliminates any friction frost heaving. The Bollard Ceme-Tube will provide a finished, maintenance free product upon installation, and will be very aesthetically appealing to the customer. The outside of the Bollard Ceme-Tube is smooth and seamless. The dome cap comes with stainless steel screws, and finishes the installation nicely. The Bollard Ceme-Tube is made entirely in the USA with USA materials.