** NOTE TO SPECIFIER ** Delete items below not required for project. Fiber reinforced cement panel siding system. Accessories required for complete installation. MANUFACTURERS Acceptable Manufacturer: ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions. Substitutions: Not permitted. Requests for substitutions will be considered in accordance with provisions of Section . ** NOTE TO SPECIFIER ** Select the siding material required from the following paragraphs. Delete materials from the following paragraphs that are not actually required for the project. MATERIALS ** NOTE TO SPECIFIER ** SIL-BONIT™ siding panels are intended for use for new construction, building facade refurbishment or insulation projects with light facades. SIL-BONIT™ cement panels meet the highest requirements of quality, function, weather resistance and aesthetics. Prefinished Cement Board Siding Panels: SILBONIT siding sheets, fiber reinforced, cement based product conforming to ASTM C 1186 and manufactured of cement sand, cellulose fibers and fillers. Panel Size: ** NOTE TO SPECIFIER ** Select the size(s) required from the following paragraphs and delete the one not required. 5/16 inch 49-1/4 inches by 96 inches. (8 mm by 1250 mm by 2440 mm). 5/16 inch 49-1/4 inches by 120 inches. (8 mm by 1250 mm by 3050 mm). Colors: ** NOTE TO SPECIFIER ** Select the color(s) required from the following Natural Colors or Treated Colors paragraphs as required and delete the ones not required. If more than one color is required indicated the location of each on the Drawings. Natural colors: Ash - Natural. Desert - Natural. Almond - Natural. Stone - Natural. Olive - Natural. Coral - Natural. Gold - Natural. Iceberg - Natural Bark - Natural Chestnut - Natural ** NOTE TO SPECIFIER ** Select the fastener type required from the following paragraphs and delete those not required. Mechanical fasteners: External tamper proof screws, stainless steel, torx head fasteners. Screws shall be length as required by the panel manufacturer for the furring material used. Wood screws: Size: #10 by 1-1/2 inch (38 mm). Steel Screws: Size: #10 by 10 inch (25.4 mm). ** NOTE TO SPECIFIER ** Painted screws are optional delete if not required. Use painted screws to match panel finish. Continuous cushions of black EPDM rubber, 1-1/4 inch (32 mm) and 3-1/2 inch (95 mm) as required. ** NOTE TO SPECIFIER ** Select the accessories required from the following paragraphs. Delete references from the list below that are not actually required by the text of the edited section. ACCESSORIES Trim: PVC, composite and stainless steel trim shapes suitable for trim conditions. Sheet Metal Flashing: Minimum 26 gauge hot-dipped galvanized steel sheet, or stainless steel. Wood furring materials shall conform to the requirements specified is Section . Metal furring shall conform to the requirements of Section . Rigid insulation between furring channels shall comply with Section . Thickness of insulation shall be as indicated on the Drawings.