High-Strength Industrial Flooring

Floor Quartz is a silica quartz aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear  resistance on the surface of industrial grade floor slabs and pavements. It is applied to the surface of fresh concrete during the normal floor finishing operations with standard finishing equipment.

Floor TR Hardener is a trap rock aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs and pavements. It is applied to the surface of fresh concrete during the normal floor finishing operations with standard finishing equipment.

Floor E Hardener is an emery aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs and pavements. It is applied to the surface of fresh concrete during the normal floor finishing operations with standard finishing equipment.

Floor Quartz FF is a silica quartz aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs and pavements. It is applied to the surface of fresh concrete after screeding and highway straightedge operations where a FF 50 or greater floor tolerance is specified.

Florundum is a marble aggregate dry shake intended for use as a surface hardener on fresh concrete to provide a decorative and durable floor surface in retail, commercial, institutional and residential grade facilities. It is applied on the surface of freshly placed concrete during normal floor finishing operations with standard finishing  equipment. Florundum will provide a terrazzo like appearance after it is diamond abraded and polished using the Retroplate system.

Metalplate is a metallic aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs. It is applied to the surface of fresh concrete during the normal finishing operations on the floor with standard finishing equipment.

Metalplate Plus is a non-oxidizing metallic aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs in combination with 100% resistance to oxidation or rusting. It is applied to the surface of fresh concrete during the normal finishing operations on the floor with standard finishing equipment.

Metalplate SD is metallic aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs in combination with static disseminating, conductive, and spark resistant properties. It is applied to the surface of fresh concrete during the normal finishing operations on the floor with standard finishing equipment. 

Metalplate Supreme is high-metallic aggregate content dry shake intended for use as a heavy-duty surface hardener on fresh concrete to provide substantially greater wear resistance to the surface of industrial grade floor slabs. It is applied to the surface of fresh concrete during the normal finishing operations on the floor with standard finishing equipment.

Metalplate FF is a metallic aggregate dry shake intended for use as a surface hardener on fresh concrete to provide substantially greater wear resistance on the surface of industrial grade floor slabs where flatness tolerances are required.  It is applied to the surface of fresh concrete after screeding and highway straightedge operations where a FF 50 or greater floor tolerance is specified.

Metalcrete is a screedable, high strength metallic topping intended for use where heavy impact and abrasion are primary floor service conditions. This product is usually applied as a bonded topping over properly prepared existing concrete at a 2 inch (50.8 mm) thickness. Metalcrete can be placed up to 5 inches (127 mm) thick.

Met-Top E is a screedable, high strength emery aggregate based topping intended for use where heavy impact, gouging and abrasion are primary floor service conditions. This product is usually applied as a bonded topping over properly prepared existing concrete at a 2 inch (50.8 mm) thickness. Met- Top E can be placed up to 6 inches (152.4 mm) thick.

Metalpoxy Flooring is an epoxy and iron aggregate system used to protect horizontal surfaces against the most severe abrasion and impact. Metalpoxy Flooring is usually applied to concrete substrates in need of repair due to excessive wear, gouging and impact, and floor areas subjected to steel wheel traffic.

Metalcrete SC is a high-strength metallic aggregate shotcrete mortar that uses a proprietary chemical blend to acheive exceptionally high early and ultimate strengths. After 56 days, Metalcrete SC has strengths over 13,000 psi (96.5 MPa). Metalcrete SC is applied by using shotcrete equipment thickness ranging from 6" in overhead applications to 9" in vertical applications. Development of decline pathways going underground is critical for movement of machinery, material, and personnel - Metalcrete SC provides a superior wear surface that resists impact and abrasion.

Metalcrete HT is a metallic aggregate topping designed for use under high temperature exposure.  It can be applied from 1 inch (25.4 mm) to 4 inches (102 mm) in thickness and provides excellent wear and impact resistance in combination with service temperatures up to 2000°F (1093°C).

Metalcrete Plus is a screedable, high-strength metallic and natural aggregate topping intended for use where heavy impact, gouging and abrasion are primary floor service conditions. It is applied monolithically over fresh concrete or as a delayed two course bonded topping at a 1 inch (25.4 mm) to 4 inch (102 mm) thickness.

Metalcrete SF is a screedable, high-strength, steel fiber reinforced metallic topping intended for use where gouging, heavy impact and abrasion are primary floor service conditions. It is applied monolithically over fresh concrete or as a delayed two course bonded topping at a 1 inch (25.4 mm) to 4 inch (102 mm) thickness. 

Metalcrete Rapid is a rapid-setting, high early strength, metallic aggregate patching mortar for repair of concrete slabs and pavements.  It is a one-part system requiring only the addition of water for mixing. Metalcrete Rapid is designed for thicknesses from 1/2 inch (12.7 mm) to 3 inches (76 mm). Metalcrete Rapid is intended for floor repairs subjected to severe abrasion and impact. High early strengths allows for traffic and abuse within 1-2 hours.

Thinpave is a latex modified concrete repair mortar for patching or resurfacing horizontal surfaces. It is used as a trowel-down material and is suitable  for both indoor and outdoor applications. Thinpave can be used from featheredge to 1/2 inch (12.7 mm) thicknesses.

Thinpave C1 is a latex modified concrete repair mortar for patching or resurfacing horizontal surfaces. It is used as a trowel-down material and is suitable for both indoor and outdoor applications. Thinpave C1 can be used from featheredge to  1/2 inch (12.7 mm) thicknesses.

Thickpave is a latex modified concrete repair mortar for patching or resurfacing horizontal surfaces. It is used as a trowel-down or screedable material and is suitable for both indoor and outdoor applications.  Thickpave can be used from a thickness of 1/2 inch (12.7 mm) to 2 inches (50 mm).

Vertipave is a latex-modified concrete repair mortar for vertical and overhead repairs.  It is designed at  a packable, trowel  grade consistency along with special additives that prevent sagging and slumping.  Vertipave is ideal for hard-to-form repairs both inside and outside and can be used from featheredge to a 4 inch (102 mm) thickness.

Vertipave C1 is a one-component vinyl fortified concrete repair mortar for vertical and overhead repairs.  It is designed at a packable, trowel grade consistency along with special additives that prevent sagging and slumping.  Vertipave C1 is ideal for hard-to-form repairs both inside and outside and can be used from featheredge to a 4 inch (102 mm) thickness.

Flexpave is a flexible, fiber reinforced, latex modified concrete repair mortar for patching or resurfacing both horizontal and vertical surfaces.  It is used as a trowel-applied material and is suitable for both indoor and outdoor applications.  Flexpave can be used from featheredge to 1/4 inch (6 mm) thicknesses.

Flowpave is a one-part, latex-modified compound designed to be installed at a self-leveling consistency.  It is mixed only with water and can be pumped or poured into place.  Flowpave can be used over concrete, wood, or mastic adhesives.  It provides a smooth, level underlayment for tile, carpet, or resilient floor coverings.

Flowpave Supreme is a self-leveling floor surfacing material designed for use as an underlayment or as a wearing surface for light duty traffic.  It is particularly useful where floors are out of tolerance or the surface has deteriorated or been damaged.  When mixed with water, Flowpave Supreme can be applied to small or large  areas at thicknesses from 1/16 inch (1.6 mm) to 1 inch (25.4 mm).

Metcrete is a concrete repair mortar for patching or resurfacing horizontal surfaces.  It is used as a trowel-down or screedable material and is suitable for both indoor and outdoor applications.  Metcrete can be used from a thickness of 1/2 inch (12.7 mm) to 6 inches (152 mm).

Plug-It is a rapid setting hydraulic cement mortar designed for filling holes and cracks in concrete or masonry.  When mixed with water, it sets in 2 to 4 minutes to allow rapid sealing and blockage of running water.  The early expansion which occurs as Plug-It sets assures a firm interlock to holes and cracks.

Speedpave MP is a rapid setting, high-early, magnesium phosphate based patching mortar for repair of concrete slabs and pavements.  It is a one-part system requiring only the addition of water for mixing.  Speedpave MP is designed for thicknesses from 1/2 inch (12.7 m) to 6 inches (152 mm).  It is good for both indoor and outdoor use.

Speedpave is a rapid setting, high-early, latex-modified patching mortar for repair of concrete slabs and pavements.  It is a one-part system requiring only the addition of water for mixing. Speedpave is designed for thicknesses from 1/2 inch (12.7 m) to 6 inches (152 mm).  It is good for both indoor and outdoor use.

Metcrete HT is a concrete topping and repair mortar for resurfacing or patching horizontal surfaces subject to high temperatures.  It is used as a trowel-down or screedable material and is suitable for both indoor and outdoor applications.  Metcrete HT can be used from a thickness of 1 inch (25.4 mm) to 6 inches (152 mm).  Provides good wear and impact resistance in combination with service temperatures up to 2000°F (1093°C). 

Finishpave is a one-part, latex modified repair compound designed for very thin trowel-on vertical applications.  Finishpave fills voids and smooths all surfaces to  provide a decorative and textured finish. When mixed with water, it gives a very workable consistency that can be applied to a near zero thickness.  It may also be applied as a slurry coat to provide a uniform colored appearance.

Featherpave is a one-part, latex modified repair compound designed for very thin trowel-on applications.  When mixed with water, it gives a very workable consistency that can be applied to a near zero thickness.  Featherpave is excellent for bringing localized bird baths and low spots up to proper level for subsequent floor covering.

Magnarok Grout is a non-shrink, non-metallic grout designed for use under steel baseplates of all types to provide precision support and bearing capacity.  It is formulated to be used from a plastic to a fluid, self-leveling consistency to assure complete filling of voids and spaces under plates, in shear keys, and around anchor bolts.  Compressive strengths are significantly higher than plain concrete.

Magnarok Metallic Grout is a non-shrink, metallic grout designed for use under heavy-duty steel base plates of all types to provide precision support  and bearing capacity. The metallic aggregate base of the material provides impact resistance and toughness not achievable with non-metallic grouts.  This grout can be used from a plastic to fluid self-leveling consistency to assure complete filling of voids and spaces under plates, in shear keys, and around anchor bolts.  Compressive strengths are significantly higher than plain concrete.

MagnaPak Grout is a non-shrink, non-metallic grout designed for use under steel base plates of all types, and grouting of hard to form precast panels, joints, and connections. It is formulated to be mixed to a damp, “dry-pack" consistency for no slump, no flow installation.  Compressive strengths are significantly higher than plain concrete.

MagnaPak Metallic Grout is a non-shrink, metallic aggregate grout designed for use under steel baseplates of all types, and grouting of hard to form precast panels, joints, and connections.  It is formulated to be mixed to a damp, “dry-pack" consistency for no slump, no flow installation. Compressive strengths are significantly higher than plain concrete.

Wedjrok Grout is a rapid setting, high early strength grout compound for use under steel baseplates of all types.  It is formulated at a pourable consistency and is free-flowing under baseplates and into anchor bolt sleeves.

Wedjrok FS Dry Pack Grout is a non-shrink, non-metallic grout designed for use under steel baseplates of all types, and grouting of hard to form precast panels, joints, and connections. It is formulated to be mixed to a damp, “dry-pack" consistency for no slump, no flow installation. Setting time is 15 to 20 minutes. Compressive strengths are significantly higher than plain concrete.

Magnarok LT Grout is a non-shrink, low temperature grout designed for use under steel baseplates of all types and as an anchoring compound. It is formulated to be used from a plastic to a fluid, self-leveling consistency to assure complete filling of voids and spaces under plates, in shear keys, and around anchor bolts.  This grout is specially designed for cold weather applications down to 20°F (-7°C).

Magnarok LTM Grout is a non-shrink, low temperature, metallic aggregate grout designed for use under steel baseplates of all types and as an anchoring  compound. The metallic aggregate base of the material provides impact resistance and toughness not achievable with non-metallic grouts. It is formulated to be used from a plastic to a fluid, self-leveling consistency to assure complete filling of voids and spaces under plates, in shear keys, and around anchor bolts. This grout is specially designed for cold weather applications down to 20°F (-7°C).

Magnarok HT Grout is a non-shrink, high temperature grout designed for use under steel baseplates of all types where temperatures in service will be up to 2000°F (1093°C).  It is formulated to be used from a plastic to a fluid, self-leveling consistency to assure complete filling of voids and spaces under plates, in shear keys, and around anchor bolts. Compressive strengths are significantly higher than plain concrete.

Magnarok Cable Sealing Cement provides an extremely dense, high-strength filler that seals all openings around electrical cables and positively prevents the transmission of flames, smoke and/or water through deck or bulkhead penetrations in marine applications.  It is a United States Coast Guard "accepted" cable sealing product for through-penetration fire stop designs. Magnarok Cable Sealing Cement is supplied as a dry powder that when mixed with water achieves high early strengths, slight expansion and long term non-shrink properties.

Diamite Epoxy Grout is a 100% reactive epoxy system designed to give very high strength, exceptional bond, chemical resistance, and tremendous toughness under load.  It contains a proprietary aggregate blend that maximizes yield while minimizing thermal movement and creep.  Diamite Epoxy Grout is dimensionally stable after hardening and is easily placed at a flowable consistency.

Diamite DP Epoxy Grout is a 100% reactive epoxy grout formulated for deep placements. This low exothermic epoxy grout achieves exceptionally high ultimate strengths, has a long pot life, and is resistant to creep when grouting machinery and equipment. Diamite DP Epoxy Grout is dimensionally stable after hardening, is chemical resistant, and expands to fill minor gaps and voids.

Diamite Novolac Epoxy Grout is a three component novolac epoxy grout system designed to provide excellent chemical resistance, very high strength, exceptional bond, and tremendous toughness under load.  It contains a proprietary aggregate blend that maximizes yield while minimizing thermal movement and creep.  Diamite Novolac Epoxy Grout is dimensionally stable after hardening and is easily placed at a flowable consistency. This product is recommended for applications where spills and splashes of acids, chemicals, solvents, and alkalines occur.

Diamite Fast-Set Grout is a fast setting, high early strength epoxy grout designed to take loads in 3 hours at normal ambient temperatures.  It provides excellent early and ultimate strengths and is resistant to common chemicals and fluids.  Diamite Fast-Set Grout is formulated with an optimum aggregate loading to balance placing requirements with desirable hardened properties.

Instarok Cement is a dry cement powder which when mixed with water hardens rapidly to a permanent, solid mass that is not affected by moisture, rain or submersion in water.  With nearly three times the strength of concrete, Instarok Cement anchors, patches and repairs in one hour or less.

Wedjrok Cement is a dry cement compound which when mixed with water hardens rapidly to a permanent, solid mass.  Wedjrok Cement is designed for applications in dry areas.  It sets firm within 15 minutes and is stronger than concrete in 1 hour.  Final strength is twice that of conventional concrete.

Diamite Anchoring Grout is a fast-setting epoxy grout designed to provide tremendous anchoring power in a short period of time for anchor bolts, embedments and dowels. Formulated to be pourable, it flows easily around bolts and into tough to access cavities.  Shutdown times or stressing in as little as 3 hours is achievable.

Diamite AGC is a water-based epoxy coating intended to protect a wide range of substrates from graffiti abuse.  Diamite AGC is resistant to spray paint, ink, crayons and harsh chemicals and may be applied to virtually any sound, clean and dry surface. Diamite AGC provides a smooth, attractive and easy-to-clean surface.

Diamite Brushkote is a solvent-based epoxy coating intended to protect a wide range of substrates from chemical and abrasion attack. It is immune to harsh chemicals including caustics and most acids. Diamite Brushkote is an excellent choice where a smooth, attractive and easy-to-clean surface is desired. 

Diamite Brushkote VOC is a water-based, high performance epoxy coating intended to protect a wide range of substrates from abrasion and chemical attack.  Diamite Brushkote VOC is totally VOC compliant, allowing application indoors without toxic odors and is an excellent choice where an  easy-to-clean and durable surface is desired.

Diamite CSC is a 100% solids, high performance epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite CSC is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite CSC is applied to walls and floors of spill, splash and chemical leakage containment areas.

Diamite NEC is a 100% solids, high performance novolac epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite NEC is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite NEC is applied to walls and floors of spill, splash and chemical leakage containment areas.

• Diamite Extreme is a 95% solids, high performance proprietary novolac epoxy compound intended for use as a chemical-resistant and containment coating to protect concrete, brick or block walls and floors. Diamite Extreme is resistant to most acids, caustics, solvents and other harsh chemicals. Diamite Extreme is applied to walls and floors of spill, splash and chemical leakage containment areas.

Lexite 100 is a single application, high build epoxy coating intended to protect horizontal surfaces against both abrasion and chemical attack. Lexite 100 may be applied to most substrates including concrete, brick, stone, wood, metal and other coatings that are firmly bonded to the base substrate.

Lexite Conductive Primer is a two-part epoxy coating system that exhibits excellent abrasion resistance as well as static dissipative properties. Lexite Conductive Primer is intended to be used in conjunction with Lexite Conductive Top Coat. Lexite Conductive Primer may be applied to concrete and metal substrates.

Lexite Conductive Top Coat is a high-build, static dissipative epoxy top coating intended to protect horizontal surfaces against both abrasion and chemical attack. Lexite Conductive Top Coat may be applied to concrete and metal substrates. It is important that this product be used in conjunction with Lexite Conductive Primer to achieve proper resistance performance.

Lexite PWC is a single application, high build epoxy coating approved for potable water contact intended to protect horizontal surfaces against both abrasion and chemical attack. Lexite PWC meets the specifications for extractions studies in accordance with CFR Title 21 polymeric and resinous coatings when extracted under distilled water, heptane and alcohol. Lexite PWC may be applied to most substrates including concrete, brick, stone, wood, metal and other coatings that are firmly bonded to the base substrate.

Lexite Glow is a single application, high build epoxy coating intended to "glow in the dark." Lexite Glow is designed to glow after activation by a light source allowing for safe evacuation of a building in total darkness. Lexite Glow may be applied to most substrates including concrete, brick, stone, wood, metal and other coatings that are firmly bonded to the base substrate.

Porselin is an epoxy enamel paint designed to coat virtually any sound vertical surface. Porselin drys to a brilliant high gloss finish, and may be used in both interior and exterior applications. Porselin protects coated surfaces from chemical attack, weathering and abrasion.

Diamite Primer is designed to be used as a primer for other Metalcrete epoxy and urethane flooring systems. Diamite Primer is available in both a water and solvent-based formulation. The water-based formulation should be used where VOC compliant materials are required or where good ventilation is not possible. Diamite Primer Conductive formulation is available for Lexite Conductive epoxy flooring applications.

Diamite Primer MVB is a two-component 100% solids epoxy primer designed to control vapor emission rates up to 20 pounds / 24 hours / 1,000 square feet. Diamite Primer MVB should be used as a primer for other Metalcrete epoxy and urethane flooring systems. Diamite Primer is available in both a water and solvent-based formulation. The water-based formulation should be used where there are issues associated with moisture in the concrete sub-base.

Diamite Oil Stop Primer is designed to be used over petroleum based oil contaminated surfaces prior to the application of other Metalcrete epoxy and urethane coating and flooring systems.

Diamite AC Epoxy Flooring is an epoxy system specifically formulated for resistance to acetic acid. It is also highly resistant to sulfuric, hydrochloric and other corrosive acids as well as most alkalis in concentrations normally found in contact with floor surfaces. Diamite AC Epoxy Flooring is used on any physically sound, clean and dry substrate including concrete, brick, terrazzo, marble, metal or wood. It may be used as a chemical-resistant grout for joints between quarry or ceramic tile when mixed with silica aggregate.

Diamite SL Epoxy Flooring is an epoxy system used to restore worn and eroded floors to their original condition and protect them from future deterioration.  Diamite SL Epoxy Flooring may be applied on any physically sound, clean, and dry substrate including concrete, brick, terrazzo, marble, metal or wood.  It may also be used to improve floor tolerances and reduce surface imperfections.  It is completely immune to the corrosive action of acids and alkalis in concentrations normally found in contact with floor surfaces.

Diamite TR Epoxy Flooring is an epoxy mortar system used to restore worn and eroded floors to their original condition and to protect from future deterioration. Diamite TR Epoxy Flooring may be applied on any physically sound, clean, and dry substrate including concrete, brick, terrazzo, marble, metal or wood.  It may be used as a chemical-resistant grout for joints between quarry or ceramic tile.  Diamite TR Epoxy Flooring is completely immune to the corrosive action of acids and alkalis in concentrations normally found in contact with floor surfaces.

Diamite Vinyl Ester is a vinyl ester resin combined with natural aggregate used to protect horizontal or vertical surfaces against abrasion and severe chemical attack.  Diamite Vinyl Ester may be used in both interior and exterior applications.

Diamite Epoxy Terrazzo is an epoxy based coating and colored chip system used to decorate and protect most substrates including concrete, stone, wood, metal and other coatings that are firmly bonded to the base substrate.  Diamite Epoxy Terrazzo systems provide a smooth, dense and durable surface with all the beauty of conventional cement terrazzo but at a fraction of the cost.

Diamite LT Mortar is an epoxy and natural aggregate system used to protect horizontal surfaces against abrasion and chemical attack in low temperature environments. It is usually applied to concrete floors in need of repair due to excessive wear and chemical attack.  Diamite LT Mortar may be applied when ambient and substrate temperatures are as low as 20°F (-7°C).

Metalpoxy Flooring is an epoxy and iron aggregate system used to protect horizontal surfaces against the most severe abrasion and impact. Metalpoxy Flooring is usually applied to concrete substrates in need of repair due to excessive wear, gouging and impact, and floor areas subjected to steel wheel traffic.

Metalpoxy SL Flooring is a self-leveling epoxy and metallic aggregate system used to protect horizontal surfaces against the most severe abrasion and impact.  Metalpoxy SL Flooring is usually applied to concrete substrates in need of repair due to excessive wear, gouging and impact, and floor areas subjected to steel wheel traffic.  It is completely immune to the corrosive action of acids and alkalis in concentrations normally found in contact with floor surfaces.

Metalpoxy Plus Flooring is an epoxy and non-oxidizing metallic aggregate system used to protect horizontal surfaces against the most severe abrasion and impact. Metalpoxy Plus Flooring is usually applied to concrete substrates in need of repair due to excessive wear, gouging and impact, and floor areas subjected to steel wheel traffic.

Diathane is a high performance urethane coating intended to provide protection against abrasion and harsh chemical attack.  Diathane may be used as a top or finish coat for all Metalcrete epoxy systems.  Diathane is an excellent choice where a dense, and easy-to clean surface is required.

Diathane Slurry is a four-component water based urethane cement slurry that has exceptional wear performance and resistance to heat. Diathane Slurry is intended for indoor applications subjected to heavy foot traffic and hand cart traffic. The Diathane Slurry flooring system produces a seamless, slip-resistant surface while offering protection from abrasion and chemical attack.

Diathane Mortar is a four-component water based urethane cement trowel down mortar that has exceptional wear performance and resistance to heat. Diathane Mortar is intended for indoor applications subjected to heavy foot traffic and hand cart traffic. The Diathane Mortar flooring system produces a seamless, slip-resistant surface while offering protection from abrasion and chemical attack.

Diathane Slurry TC is a four-component water based urethane top coat designed to be applied over Diathane Slurry. Diathane Slurry and Diathane Slurry TC have exceptional wear performance and resistance to heat. Diathane Slurry TC is intended for indoor applications subjected to heavy foot traffic and hand cart traffic. The Diathane Slurry TC flooring system produces a seamless, slip-resistant surface while offering protection from abrasion and chemical attack.

Diathane AGC is a VOC compliant urethane coating intended to protect a wide range of substrates from graffiti abuse.  Diathane AGC is resistant to spray paint, ink, crayons and harsh chemicals and may be applied to virtually any sound, clean and dry surface. Diathane AGC provides a smooth, attractive and easy-to-clean surface.

Diathane LT Mortar is a urethane and natural aggregate system used to protect horizontal surfaces against abrasion and chemical attack in low temperature environments. It is usually applied to concrete floors in need of repair due to excessive wear and chemical attack. Diathane LT Mortar may be applied when ambient and substrate temperatures are as low as 10°F (-12°C).

Diamite TDC is a polyurethane system used as a traffic deck coating system to protect concrete from future deterioration due to moisture infiltration and chloride ion attack as well as abrasion.  The Diamite TDC system consists of a primer, base coat, intermediate coat (optional) and top coat.  Diamite TDC is an elastomer designed to be a waterproofing membrane.  Diamite TDC may be applied on any physically sound, clean and dry substrate including concrete, brick, terrazzo,  marble, metal or wood.  It is completely immune to the corrosive action of salts, acids and alkalis in concentrations normally found in contact with concrete surfaces subjected to vehicular or pedestrian traffic.