Metal Roofing and Siding

The Easy-Lock™ Standing Seam is the metal roofing panel with a patented no-siphon dry lock seam, with a unique reversing feature to allow installation of panels from both directions – starting at any location. The panel is designed with softer, less industrial lines to provide a more architecturally pleasing appearance.

Features & Benefits

• Manufactured in Salem OR, Auburn WA and Sacramento CA

• 12″ and 16″ Coverage Options

• 26, 24 & 22 Tru-Gauge™ and .032 " Aluminum

• 16 & 20 oz. Copper (please inquire)

• Factory-notched and tabbed panels available

• Vertical interlocking application: allows installation from both directions starting at any location

• Patented no-siphon lock seam

• 1″ vertical rib with ⅜" flat top for ease of flashing attachment

• Concealed fasteners: fasteners cannot leak

• Pre-slotted fastener flange: allows expansion and contraction of panel (high wind clips available for panel lengths over 35′)

• 3:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 4′ to 35′ – not notched
  Standard panel lengths 1′ to 35′ – notched
  (for longer panels, please inquire)

• Panel options: Striations, Accent Ribs, Flat Pan

StreamLine™ Standing Seam is the metal roofing panel with a patented no-siphon dry lock seam, with a unique reversing feature to allow installation of panels from both directions – starting at any location. The panel is designed with softer, less industrial lines to provide a more architecturally pleasing appearance.

Features & Benefits

• Manufactured in Salem OR and Sacramento CA

• 16″ Coverage Option

• 26 gauge Tru-Gauge™ ArmorTech™ Painted Steel

• Factory-notched and tabbed panels available

• Vertical interlocking application: allows installation from both directions starting at any location

• Patented no-siphon lock seam

• 1″ vertical rib with ⅜" flat top for ease of flashing attachment

• Concealed fasteners: fasteners cannot leak

• Pre-slotted fastener flange: allows expansion/contraction of panel(high wind clips available for panel length over 35′)

• 3:12 minimum pitch recommended (for lower pitches please inquire)

• Standard panel lengths 4′ to 35′ – not notched

• Standard panel lengths 1′ to 35′ – notched and tabbed (for longer lengths, please inquire)

• Panel options: Striations and Accent Ribs

Loc-Rib™ concealed fastener panel has a 16" coverage and a rib height of 7/8". Each panel snaps securely over the adjacent panel, eliminating the use of unsightly exposed fasteners. Loc-rib™ panels are a snap to install and our exclusive design ensures that they stay locked without the need for “extras" such as a seaming tools, washers or clips! We make Loc-Rib™  in custom cut lengths to meet your needs from 3' to 40' (Please inquire for lengths over 40'). All Loc-Rib™  is produced in our exclusive “true" 26 gauge steel! (24 gauge available on special request.)

Features & Benefits

• Manufactured in Spokane, WA

• 16" Coverage Option

• 26 and 24 Tru-Gauge™

• Concealed fasteners: fasteners cannot leak

• 7/8" vertical rib

• Standard panel lengths 3' to 40' (please inquire for longer panels)

• Snap lock rib — no mechanical seaming

• 3:12 minimum pitch recommended

• Panel options: Accent Ribs

• Made from high-tensile steel for superior load capacity

• All painted materials have corrosion resistant metallic finish under the primer and topcoat

• Interlocking rib with mastic recess insures a positive lock and a weathertight seal

• ArmorTech™ SMP paint system with a 40 year written paint warranty

• Oil canning is an inherent characteristic of steel products, not a defect, and is not a cause for panel rejection

Snap-Loc is one of the most attractive and durable roofing materials available today. It's also noncombustible, meeting the strictest building and fire codes. Snap-Loc's innovative standing seam design is self-locking for a watertight seal. Installation of the Snap-Loc roofing system is a “snap."

Features & Benefits

• Manufactured in Auburn, WA

• 12″ Coverage Option

• 26 gauge Tru-Gauge™

• Span up to 2 feet on center

• Concealed fasteners: fasteners cannot leak

• 1″ vertical rib with 5/16″ flat top for ease of flashing attachment

• Lightweight, strong and durable

• Easy installation

• Affordable with minimum maintenance

• 3:12 minimum pitch recommended: for lower pitches please inquire

• Standard panel lengths 3′ to 40′: for longer panels, please inquire

• Pan options: Accent Ribs

The Premier-Lock™ Standing Seam has the anti-capillary dry lock seam. It's designed with softer, less industrial lines to provide a more architecturally pleasing appearance.

Features & Benefits

• Manufactured in Sacramento CA and Riverside CA

• Standard width for Premier-Lock™ 100: 15.75″

• Standard width for Premier-Lock™ 150: 14.75″

• 24 and 22 gauge Tru-Gauge™

• Factory-notched panels available

• Anti-Capillary dry lock seam

• Pre-slotted fastener flange: allows expansion/contraction of panel

• Premier-Lock 100 — 1″ rib height
  Premier-Lock 150 — 1-1/2″ rib height

• Concealed fastener system

• 3:12 minimum pitch recommended (for lower pitches please inquire)

• Standard panel lengths 2′ to 35′ (for longer panels, please inquire)

• Panel options: Striations, Accent Ribs and Flat Pan

Versa-Span™ system is a strong, durable, versatile, long length roof panel. It combines the strength of steel fluted pans and a lock-action rib design. Which together, with concealed fasteners, enables installation on low pitched roofs.

Features & Benefits

• Manufactured in Salem, OR

• 12″, 14″, 16″ & 18″ Coverage Options available

• 24 and 22 gauge Tru-Gauge™ and .032″ and .040″ Aluminum

• Floating clip system: allows for expansion & contraction of panels in longer lengths

• 1-3/4″ Vertical Rib, factory notching available

• 2:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 5′ to 60′ – not notched
  Standard panel lengths 1′ to 60′ – notched
  (for longer length panels, please inquire)

• Onsite roll forming available for longer panels

• Factory injected Butyl sealant available

• Clip Relief is not standard, available upon request

• Pan options: Striations, Accent Ribs, Flat pan

• Wide Batten incorporates nicely over Versa-Span™ standing seam panel (separate clip required)

• Weather tightness warranty available (Contact Taylor Metal representative for details)

Versa-Span™ system is a strong, durable, versatile, long length roof panel. It combines the strength of steel fluted pans and a lock-action rib design. Which together, with concealed fasteners, enables installation on low pitched roofs.

Features & Benefits

• Manufactured in Riverside CA and Sacramento CA

• 12″, 14″, 16″ & 18″ Coverage Options

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum

• 1-3/4″ Vertical Rib, factory notching available

• 2:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 1′ to 60′ (for longer length panels, please inquire)

• On-site roll forming available for longer panels

• Factory injected butyl sealant available

• Clip relief is not standard, available upon request

• Wide batten incorporates nicely over Versa-Span™ standing seam panel (separate clip required)

• Weathertightness warranty available (Contact TMP representative for details)

The Clip-Lock™ standing seam delivers a panel with strong clean continuous grace with unequaled quality. This provides you a weather tight roof to last a lifetime. Clip system allows for extremely long panels, without the need for laps.

Features & Benefits

• Manufactured in Sacramento and Riverside, CA

• Standard width for Clip-Lock 100™ are 13″ or 17″
  Standard width for Clip-lock 150™ is 15.5″
  (Please inquire for other coverage options)

• 24 and 22 gauge steel and .032″ and .040″ Aluminum

• Factory notched & tabbed panels available

• Clip system: allows for expansion/contraction of panels in longer lengths

• Clip-Lock 100™ — 1″ rib height

• Clip-Lock 150™ — 1-1/2″ rib height

• Concealed fastener system

• 3:12 minimum pitch recommended
  (For lower pitches, please inquire)

• Standard panel lengths 3′ to 50′
  (for longer panels, please inquire)

• Panel options: Striations, Accent Ribs, and Flat Pan

The Slim-Lock™ Standing Seam delivers a panel with strong, clean, continuous grace, together with unequaled quality. This provides you a weather tight roof to last a lifetime. Clip systems allow for extremely long panels, without the need for laps.

Features & Benefits

• Manufactured in Salem, OR

• Standard coverages: 12″, 16″, and 20″ nominal (24 ga only)

• 24 & 22 gauge Tru-Gauge™

• 16 & 20 oz. Copper (Please inquire)

• Floating clip system: allows for expansion & contraction of panels in longer lengths

• 1-1/2″ vertical rib

• Standard factory notched panels

• Concealed fasteners: fasteners cannot leak

• 3:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 4′ to 60′ (for longer panels, please inquire)
  Minimum length 2′ Notched
  Minimum length 1′ Not Notched

• 2′ Shortcut capability (fee applicable)

• Onsite roll forming available

• Panel options: Striations, Accent Ribs, Flat Pan

SL-15 is an architectural standing seam panel with vertical, narrow ribs that provide an elegant and classic appearance. It is a snap-lock rib with no mechanical seaming.

Features & Benefits

• Manufactured in Spokane, WA

• 15" coverage option

• 26 and 24 Tru-Gauge™

• Concealed clip system

• 1-1/2" vertical rib

• Snap lock rib — no mechanical seaming

• On-site roll forming available for longer panels

• Panel options: Striations, Pencil Rib, and Flat Pan

• Made from high-tensile steel for superior load capacity

• All painted materials have corrosion resistant metallic finish under the primer and topcoat

• ArmorTech™ SMP paint system with a 40 year written paint warranty

• Oil canning is an inherent characteristic of steel

• products, not a defect, and is not a cause for panel rejection

Taylor Metal Products T-Panel™ is designed for use on residential and commercial structures. The T-Panel™ and separate narrow batten are perfect for radius entries, or entire roofs.

Features & Benefits

• 12″ to 20″ Coverage

• Pre-curved panels to fit radius roof area, radius down to 3'0″

• Pre-curved battens and gables

• Incorporates nicely with Easy-Lock™ Standing Seam panel

• Concealed fasteners Clip system

• UL 580 Class 90 Wind Uplift rated

• UL 790 Class A Fire rated & UL 2218 Impact 4 rated

• Custom cut to length: 2′ to 60′

• Panel options: Striations, Accent Ribs, Flat Pan

The MS-Series™ is a fully crimped Standing Seam roof that is perfect for high wind areas and snow country. The butyl injected seam prevents water from entering the system. Giving you a worry free roof for a lifetime.

Features & Benefits

• Manufactured in Salem OR, Riverside CA and Sacramento CA

• 13″, 17″ & 21″ coverage options (other widths inquire)

• 26, 24 & 22 Tru-Gauge™ and .032″ Aluminum

• 16 & 20 oz. Copper (please inquire)

• Zinc Coil (inquire for thicknesses)

• Floating clip system: allows for expansion/contraction of panels in longer lengths

• 1″ vertical rib

• Factory injected Butyl sealant available

• Concealed fasteners: fasteners cannot leak

• 1:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 3′ to 60′ – notched
  Standard panel lengths 1′ to 60′ – not notched
  (For longer panels, please inquire)

• Onsite roll forming available

• Panel options: Striations, Accent Ribs, Flat Pan

The MS-Series is a fully crimped Standing Seam roof that is perfect for high wind areas and snow country. The butyl injected seam prevents water from entering the system. Giving you a worry free roof for a lifetime.

Features & Benefits

• Manufactured in Salem OR, Riverside CA and Sacramento CA

• 12″, 16″ and 20″ coverage options (other widths inquire)

• 26, 24 & 22 Tru-Gauge™ and .032″ Aluminum

• 16 & 20 oz. Copper (please inquire)

• Zinc Coil (inquire for thickness)

• Floating clip system: allows for expansion/contraction of panels in longer lengths

• 1-1/2″ vertical rib

• Factory injected Butyl sealant

• Concealed fasteners: fasteners cannot leak

• 1:12 minimum pitch recommended (for lower pitches, please inquire)

• Standard panel lengths 3′ to 60′ – notched
  Standard panel lengths 1′ to 60′ – not notched
  (For longer panels, please inquire)

• Onsite roll forming available

• Panel options: Striations, Accent Ribs, and Flat Pan

• OverEZee retro-fit systems available

• Weathertightness warranty available (contact TMP representative for details)

The MS-200™ panel is a fully crimped Standing Seam roof that is perfect for low slope roofs in any environment. The butyl injected seam prevents water from entering the system. Giving you a worry free roof for a lifetime. The system is a strong, durable, versatile, and perfect for long length roofs panels.

Features & Benefits

• Manufactured in Salem OR, Riverside CA and Sacramento CA

• 12″, 14″, 16″ and 18″ options available

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum

• Zinc Coil (inquire for thickness)

• Floating clip system: allows for expansion/contraction of panels in longer lengths

• 2″ vertical rib, factory notching available

• ½:12 minimum pitch recommended (for lower pitches, please inquire)

• On-site roll forming available for longer panels

• Factory injected Butyl sealant available

• Concealed fasteners: fasteners cannot leak

• Weathertightness warranty available (Contact TMP representative for details)

• MS-200™ FM Approvals Class: 4471

  • FM Approvals Certificate

  • FM Approvals Report

• OverEZee retro-fit system available

• Panel options: Striations, Accent Ribs, Flat Pan

Purchased and installed by Pfeifer Roofing in Salem. The storage/office project features 12" Matte Black panels with a KYNAR 500 paint finish. Horizontal siding used in the gables accentuates the vertical traditional look. The owner will enjoy the traditional appearance and low-maintenance product (no painting required!) for years to come! We roll form this product in 12″ and 16″ widths, in our full color range, 26-24-22 gauge steel, Rusteel Plus, aluminum, copper, and zinc.

Features & Benefits

• 12″ or 16″ panel coverage

• 26, 24, & 22 Tru-Gauge™

• 3/4″ deep panel

• 2″ wide batten

• Panel options: Lightly Striated (standard), Flat Pan (please inquire)

• Slotted screw flange — allows for expansion and contraction

• 2′ to 35′ panel lengths (for longer length panels, please inquire)

• Vertical or horizontal wall application

• Acceptable for use as a soffit panel

• 1″ Slot on screw flange – allows 1/2″ movement in each direction

SmoothWall™ will give your commercial or residential projects a clean monolithic appearance. With the different panel styles available, your designs will come alive.

Features & Benefits

• 12″ coverage panel

• 24 & 22 Tru-Gauge™

• .032″ & .040″ Aluminum

• 20 and 18 gauge, .050″ and .063″ Aluminum available (please inquire)

• Custom lengths 3′ to 35′ (inquire for longer or shorter lengths)

• 2′ Shortcut capability (fee applicable)

• Concealed fasteners: fasteners cannot leak

• Versatile in wall and soffit applications

• Unique smooth wall appearance

• Panel options: Striations, Single V-Groove, Double V-Groove, and Flat Pan (only available in 24 & 22 gauge, and .032″ & .040″ Aluminum)

Lifetime Soffit™ panels are a perfect fit to be used on walls, soffits and fascia. With the different panel styles available, your designs will come alive.

Features & Benefits

• 12″ coverage panel

• 24 & 22 Tru-Gauge™

• .032″ & .040″ Aluminum

• Substrate: ASTM A653/A792

• Custom Lengths 3′ to 35′

• (Inquire for longer and shorter lengths)

• 2′ Shortcut capability (fee applicable)

• Concealed fasteners: fasteners cannot leak

• Available as perforated and solid panels

• 6.16 sq. in. (4.2%) free air flow per lineal foot of perforated panel

• Provides increased ventilation

• Versatile in wall and soffit applications

• Panel options: Vented, Striations, Single or Double V-Grooves, and Flat Pan

• “Oil Canning" is an inherent characteristics of roof and wall products, and not a defect, which is not a cause for panel rejection

ShadowLine™ will give your commercial or residential project a unique appearance. The panel reveal displays a shadowing effect that changes throughout the day, giving depth to your building.

Features & Benefits

• 11″ to 15″ coverage panels

• 24 & 22 Tru-Gauge™

• .032″ & .040″ Aluminum

• 1/2″ to 2″ reveals in 1/2″ increments

• Custom Lengths 3′ to 35′
  (inquire for longer or shorter lengths)

• 2′ Shortcut capability (fee applicable)

• Concealed fasteners: fasteners cannot leak

• Versatile in wall and soffit applications

• Panel options: Vented, Striations, Single V-Groove, Double V-Grooves, and Flat Pan

• ShadowLine™ can be perforated for soffit applications

Contour Classic Series™ gives you the custom look you want within your budget. If one of our standard profiles does not match your design requirements, no problem. TMP will fabricate the profile that matches your project needs — not ours. Contact us so we can help fulfill your vision of the perfect look.

Features & Benefits

• 12″ and 16″ panel coverages

• 24 and 22 gauge Tru-Gauge™, .032 and .040 Aluminum

• 20 and 18 gauge, .050 and .063 Aluminum available (please inquire)

• 2′ to 20'10" panel lengths

• 3/4″, 7/8″, 1-1/4″ and 1-1/2″ deep panels

• Custom profiles available

• Application can be vertical or horizontal

• Acceptable for use as a soffit panel

• Panels are interchangeable

• Clip systems available – flush mount and high performance standoff clip (required for 18 and 20 gauge)

• Manufactured in Riverside CA, Sacramento CA & Salem OR

Features & Benefits

• 8″, 12″ and 16″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ Screw Flange and Clip attachment available

• 7/8″ deep panel

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Vented options available (please inquire)

• Manufactured in Salem OR

Features & Benefits

• 12″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″
  Screw Flange and Clip attachment available

• Custom 20 & 18 Tru-Gauge™ and .050 and .060 Aluminum.
  These require the use of high performance clip (please inquire)

• 1″ and 1-1/2″ deep panel

• 2′ to 20'10" panel lengths

• Custom profile available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

• Manufactured in Salem OR & Riverside CA

Elevated Series wall panels give you various design options for siding and soffit applications. Whether you are looking for clean consistent lines or want to mix and match different profiles, either option will give your building a lifetime of elegance.

Features & Benefits

• 10″ panel coverage

• 24 and 22 Tru-Gauge™ and .032 and .040 Aluminum.
  Screw Flange and Clip attachment available.

• Custom 20 & 18 Tru-Gauge™ and .050 and .063 Aluminum.
  These require the use of high performance clip (please inquire)

• Seamless runs, fewer runs and less labor

• 3/4″ deep panel

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

Aspire Series gives you the custom look you want within your budget. Contact us so we can help fulfill your vision of the perfect look.

Features & Benefits

• 12″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum. Screw Flange and Clip Attachment available.

• Custom 20 & 18 Tru-Gauge™ and .050″ and .063″ Aluminum. These require the use of high performance clip (please inquire).

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

Integral Series gives you the custom look you want within your budget. Contact us so we can help fulfill your vision of the perfect look.

Features & Benefits

• 12″ or 16″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum. Screw Flange and Clip Attachment available.

• Custom 20 & 18 Tru-Gauge™ and .050″ and .063″ Aluminum. These require the use of high performance clip
  (please inquire).

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

InFLEXion Series gives you the custom look you want within your budget. Contact us so we can help fulfill your vision of the perfect look.

Features & Benefits

• 12″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum. Screw Flange and Clip Attachement available.

• Custom 20 & 18 Tru-Gauge™ and .050″ and .063″ Aluminum. These require the use of high performance clip (please inquire).

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

Neo Series gives you the custom look you want within your budget. Contact us so we can fulfill your vision of the perfect look.

Features & Benefits

• 12″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum. Clip Attachment available.

• Custom 20 & 18 Tru-Gauge™ and .050″ and .063″ Aluminum. These require the use of high performance clip (please inquire).

• 2′ to 20'10" panel lengths (Inquire for longer lengths)

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

Trinity Series gives you the custom look you want within your budget. Contact us so we can help you fulfill your vision of the perfect look.

Features & Benefits

• 12″ or 16″ panel coverage

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum. Screw Flange and Clip Attachment available.

• Custom 20 & 18 Tru-Gauge™ and .050″ and .063″ Aluminum. These require the use of high performance clip (please inquire).

• 2′ to 20'10" panel lengths

• Custom profiles available

• Vertical or Horizontal Wall Application

• Acceptable for use as a soffit panel

• Interchangeable panel widths and configurations

• Perforated options available (please inquire)

Impact Series gives you the custom look you want within your budget. Contact us so we can help fulfill your vision of the perfect look.

Features & Benefits

• 12″ panel coverage

• 24 and 22 Tru-Gauge™ and .032" and .040 Aluminum. Screw Flange and Clip Attachment available

• Custom 20 & 18 Tru-Gauge™ and .050" and .063" Aluminum. These require the use of high performance clip.
  (please inquire)

• 2′ to 20'10" panel lengths

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

SW-16 is a concealed fastener soffit and wall panel.  It is a flush panel that gives a uniform, smooth and sleek appearance.  The panel has a center pencil rib with a vented option for soffit application.  On-site roll forming is available.  SW-16 panels are made from high-tensile steel for superior load capacity.  All painted materials have a resistant metallic finish under the primer and topcoat.

Features & Benefits

• Center pencil rib

• Vented option for soffit application

• No visible fasteners

• On-site roll forming available

• Made from high-tensile steel for superior load capacity

• Paint materials have corrosion resistant metallic finish under the primer and topcoat

• ArmorTech™ SMP Pain system with a 40 year written paint warranty

• Coverage: 16"

• Major Rib Height: 1"

• Major Rib Spacing: 16" o.c.

• Major Rib Configuration: Concealed, Interlocking

• Fastening: Concealed, screws or nails

• Thickness: 26 ga., 24 ga.*

• Base Metal: 80 ksi steel

• Options Vented (5.1 sq in/sf), Non-Vented, Striated or Flat Pan

Tuff Rib Panel is an economical, structural, light gauge through-fastener roof and wall panel that is an excellent choice for commercial, industrial and agricultural applications.

Features & Benefits

• 36″ Coverage Option

• 29 and 26 Tru-Gauge™

• 3/4″ Vertical Rib

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass & Polycarbonate panels available to match profile

• Manufactured in Salem OR and Riverside CA

• OverEZee™ retro-fit systems available

Ultra-Panel™ has a positive side lap that keeps panels square and acts as an excellent anti-siphon that prevents leakage at the seams – eliminating the need for side lap tape and stitch screws. Because the side lap is virtually invisible, the Ultra-Panel™ has a clean, attractive appearance.

Features & Benefits

• 36″ Coverage Option

• 29 Tru-Gauge™

• 3/4″ Vertical Rib

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass & Polycarbonate panels available to match profile

• Manufactured in Spokane WA

• OverEZee™ retro-fit systems available

Rolled Rib™ is a low profile, exposed fastener panel with a 36 inch coverage. Rolled Rib™ is commonly used in both roof and wall applications. Throughout the inland empire, you can see rolled rib used in agricultural, commercial, residential and industrial applications. Rolled Rib™ is available in 29 gauge steel, 26 GA. Available on request.

Features & Benefits

• 36″ Coverage Option

• 29 Tru-Gauge™

• 3/4″ Vertical Rib

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass & Polycarbonate panels available to match profile

• Manufactured in Spokane WA

• OverEZee™ retro-fit systems available

T-3™ Panel is a light gauge exposed fastener panel with 3/4″ high ribs, 9″ on center, with a 36″ net coverage. This is the roof and wall panel of choice for the Pacific Northwest Region.

Roof & Siding: T-3™ | Glacier White & Tile Red

Features & Benefits

• 29, 26, 24 and 22 Tru-Gauge™ and .032″ Aluminum and Rusteel Plus™

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lenghts 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Fiberglass & Polycarbonate panels available to match profile

• Manufactured in Salem OR

• OverEZee™ Retro-fit systems available

GR-7™ is an economical, structural, light gauge through-fastener roof and wall panel that is an excellent choice for commercial, industrial and agricultural applications.

Features & Benefits

• 36″ Coverage Option

• 29, 26, 24 and 22 Tru-Gauge™ and .032″ Aluminum and Rusteel Plus™ (A606)

• 11/16″ Vertical Rib

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20′ 11″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass panels available to match profile

• Manufactured in Salem OR and Riverside CA

• OverEZee™ retro-fit systems available

Max Corr™ Panel is an economical, structural, light gauge through-fastener roof and wall panel that is an excellent choice for commercial, industrial and agricultural applications, interior liner panels and aesthetic wall panels. The unique, wider profile reduces installation costs when compared with traditional 24″ 2-1/2″ corrugated panels.

Features & Benefits

• Coverage options:
  34-5/8″ (29ga only)
  37-1/4″ (26ga, 24ga, 22ga  .032″ and .40″ Aluminum)

• 29, 26, 24 & 22 gauge Tru-Gauge™ and .032″ and .040″ Aluminum

• 22 gauge Rusteel Plus™ (A606)

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 30′ (For longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass panels available in white, 24″ wide, 12′ length

• Manufactured in Salem OR

• OverEZee™ Retro-fit systems available

2-1/2″ Corrugated Panel is an economical, structural, light gauge through-fastener roof and wall panel that is an excellent choice for commercial, industrial and agricultural applications, interior liner panels and aesthetic wall panels.

Features & Benefits

• 29 and 26 Tru-Gauge™

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 30′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall apllication

• Perforated options available (please inquire)

• Fiberglass panels available to match profile

• Manufactured in Salem OR

• OverEZee™ Retro-fit systems available

Features & Benefits

• 26, 24, and 22 Tru-Gauge™ and .032″ Aluminum

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′
  (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass and Polycarbonate panels available to match profile

• Manufactured in Salem OR, Spokane WA, Riverside CA & Sacramento CA

• OverEZee™ retro-fit systems available

Features & Benefits

• 26, 24 and 22 Tru-Gauge™ and .032″ Aluminum

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Fiberglass & polycarbonate panels available to match profile

• Manufactured in Salem OR and Riverside CA

• OverEZee™ retro-fit systems available

HR-34™ is an exposed fastener metal panel with full 34″ net coverage and is ideal for commercial, industrial, and architectural roof and wall applications.

Features & Benefits

• 26, 24 and 22 gauge Tru-Gauge™, and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20′ 11″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Structural panel that will span up to 6′

• Manufactured in Salem OR & Spokane WA

• OverEZee™ Retro-fit systems available

HR-34™ is an exposed fastener panel with full 34″ net coverage and is ideal for commercial, industrial, and architectural roof and wall applications.

Features & Benefits

• 26, 24 and 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Structural panel that will span up to 6′

• Manufactured in Riverside CA

• OverEZee™ retro-fit systems available

Classic 7/8″ Corrugated™ Panel is an economical, structural, exposed fastener metal roof and wall panel. Deep corrugations allow for aesthetically pleasing shadow lines, making it an excellent choice for siding or roofing applications.

Features & Benefits

• 26, 24, and 22 Tru-Gauge™ and .032″ and .040″ Aluminum

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1′ to 45′ (For longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and Vertical or Horizontal Wall application

• Fiberglass panels available to match profile

• Manufactured in Salem, OR

• OverEZee™ Retro-fit systems available

Classic 7/8″ Corrugated™ Panel is an economical, structural, exposed fastener metal roof and wall panel. Deep corrugations allow for aesthetically pleasing shadow lines, making it an excellent choice for siding and roofing applications.

Features & Benefits

• 24 and 22 Tru-Gauge™ and .032" and .040" Aluminum

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 1' to 45' (For longer length panels, please inquire)

• Long length flashings available up to 20' 11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and Vertical or Horizontal Wall application

• Fiberglass panels available to match profile

• Manufactured in Riverside CA

• OverEZee™ Retro-fit systems available

7/8″ Corrugated panels are classically designed exposed fastener panels with multiple coverage and spacing options to choose from.  With exceptional durability and unlimited color options, any one of the our 7/8″ Corrugated panels would be the perfect choice for function and creativity.   The construction of corrugated panels allows them to follow every curve of your design where needed when installed vertically.  And it's suitable for use on both wall and roof applications.

Features & Benefits

• 29 or 26 Tru-Gauge™

• 1:12 minimum pitch recommended

  • special detail at ridge, eave & side lap

• 29-5/16″ roof coverage & 32″ wall coverage

• Custom lengths 1′ to 45′ (For longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and Vertical or Horizontal Wall application

• Fiberglass panels available to match profile

• Manufactured in Spokane WA

• OverEZee™ Retro-fit systems available

• Installation recommended over solid sheeting

Classic V-Rib™ panel is an economical, structural, through fastener metal roof and wall panel. Deep corrugations allow for aesthetically pleasing shadow lines, making it an excellent choice for siding or roofing applications.

Features & Benefits

• 24 and 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 3′ to 20'10" (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal application

• Perforated options available (please inquire)

• Structural panel will span up to 6′

• Manufactured in Salem OR, Sacramento CA, and Riverside CA

• OverEZee™ Retro-fit systems available

BR-36 is through-fastened roof & wall metal panel with full 36″ net coverage and is ideal for commercial, industrial, and architectural roof and wall applications.

Features & Benefits

• 24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 3′ to 20'10" (for longer length panels, please inquire)

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Perforated options available (please inquire)

• Structural panel that will span up to 5′

• Manufactured in Salem OR, Sacramento CA, and Riverside CA

• OverEZee™ retro-fit systems available

.0 Rib panel is an economical, structural, through fastener metal roof and wall panel. Deep corrugations allow for aesthetically pleasing shadow lines, making it an excellent choice for siding or roofing applications.

Features & Benefits

• 24 and 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 4′ to 20'10"

• Long length flashings available up to 20'11"

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Structural panel that will span up to 5′

• Manufactured in Salem OR, Riverside CA and Sacramento CA

• OverEZee™ retro-fit systems available

TR-7.2 is an exposed fastener metal panel with full 36″ net coverage and is ideal for commercial, industrial, and architectural roof and wall applications.

Features & Benefits

• 36″ Coverage Option

• 24 and 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1-1/2″ Vertical Rib

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 3′ to 20′ 10″ (for longer length panels, please inquire)

• Long length flashings available up to 20′ 11″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washer screws

• Roof and Vertical or Horizontal Wall application

• Structural panel that will span up to 6′

• Manufactured in Salem OR, Sacramento CA, and Riverside CA

• OverEZee™ Retro-fit systems available

Our exposed fastener metal panels offer an ideal roof and/or wall application for commercial, industrial, and architectural buildings.

Features & Benefits

• 24 & 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch if seam height ≥ 1″ recommended when installed with butyl sealant

• 3:12 minimum pitch if seam height is < 1″ recommended when installed with butyl sealant

• Custom lengths 2′ to 20′ 10″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

• OverEZee™ Retro-fit systems available

Our exposed fastener metal panels offer an ideal roof and/or wall application for commercial, industrial, and architectural buildings.

Features & Benefits

• 24 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 3:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 2′ to 20′ 10″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

• OverEZee™ Retro-fit systems available

Our exposed fastener metal panels offer an ideal roof and/or wall application for commercial, industrial, and architectural buildings.

Features & Benefits

• 24 & 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch if seam height ≥ 1″ recommended when installed with butyl sealant

• 3:12 minimum pitch if seam height is < 1″ recommended when installed with butyl sealant

• Custom lengths 2′ to 20′ 10″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

• OverEZee™ Retro-fit systems available

Our exposed fastener metal panels offer an ideal roof and/or wall application for commercial, industrial, and architectural buildings.

Features & Benefits

• 24 & 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 2′ to 20′ 10″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

• OverEZee™ Retro-fit systems available

Our exposed fastener metal panels offer an ideal roof and/or wall application for commercial, industrial, and architectural buildings.

Features & Benefits

• 24 & 22 Tru-Gauge™ and .032″ Aluminum

• Custom 20 & 18 Tru-Gauge™ and .040″ Aluminum (please inquire)

• 1:12 minimum pitch recommended when installed with butyl sealant

• Custom lengths 2′ to 20′ 10″

• Standard trim, custom trim and accessory packages available

• Color matched neoprene washered screws

• Roof and vertical or horizontal wall application

• Manufactured in Salem OR, Riverside CA, and Sacramento CA

• OverEZee™ Retro-fit systems available

Engineered OverEZee™ Sub-Purlins are used as a structural connection to the existing steel purlins. OverEZee™ are Code Compliant, no liability for failures from inadequate attachment.

Features & Benefits

• Standard PBR Profile

• 10′ lengths

• Pre-punched holes

• Custom notched for the existing roof profile

• The system allows for a new installation

• No tear-off = lower cost system

• Saves removal and disposal fees

• Safer installation

• Little disruption to building occupants

Custom sizes available: See your Taylor Metal Representative for details.

Safely guide snow off your metal roof with snow guards

S-5! clamps are specifically designed for your exact standing seam metal roof and roof profile to maximize cost/holding strength ratios. It is important to choose the correct clamp for use on your specific roof type, gauge, and material.

Features & Benefits

Quick and easy installation, zero panel penetration involved

• Keep snow from falling off your roof, and decrease the likelihood of damage or injury

• Carefully designed to preserve both cost and performance

• Certified material, certified testing, and certified production!

• Limited Lifetime Workmanship and Material Warranty

Introducing DR!PSTOP, a different way of dealing with condensation on uninsulated metal roofs or in a simpler, more economical way.

Dr!pStop absorbs and holds moisture when weather conditions cause condensation to occur, it holds the moisture in specifically designed pockets in the membrane. When the weather changes to above the dew point, the moisture is released back into the air as normal humidity. The bond holding the water is so strong, that even at a forty-five degree slope it still holds 26 ounces of moisture. Dr!pStop can hold more than one quart of water per ten square feet of space.

One of the defining properties for any building is keeping the contents safe from the elements. If condensation from your metal roof is causing the contents to be rained on, your structure is not providing this basic function. Dr!pStop condensation control membrane is a cost effective solution for preventing dripping caused by condensation. Whether you are protecting livestock or equipment, Dr!pStop is a name that you can trust.

Does Dr!pStop actually stop condensation? While it does a wonderful job trapping condensation, Dr!pStop cannot stop it from happening. For Dr!pStop to function properly, you must have adequate ventilation to allow the moisture in the membrane to dry out as part of its cycle for the product to work to its full potential.

Features & Benefits

• Helps fight corrosion

• Easy to Clean

• Stops bird nesting trouble

• Reduces rain noise

• Durable, rip & tear resistant

• Saves money on installation

• Cuts down construction time

• Reduces the risk of injury during installation

Underlayment 

Snow Retention

Skylight Panels

Sealants

Pipe Flashings

Miscellaneous

Insulation

Fasteners

Door Track Hardware

Closures

Clips

Taylor Metal engineers, designs, manufactures, and supplies high-quality self-storage buildings, with millions of square feet delivered to facilities of all sizes. Our experienced team ensures exceptional customer support, competitive pricing, and custom solutions tailored to your needs.

Panels & Structural Systems

Your One-Stop Source for Steel Roofing, Wall Panels, Components, and Custom Steel Building Packages. Serving Agricultural, Residential, Light Commercial, and Self-Storage Industries.

Not all carports are built to last. Many are designed in regions where snow isn't a concern, resulting in structural shortcuts that fail under harsh weather. Each year, poorly built carports collapse, causing damage, liability, and inconvenience.

Taylor Metal offers 20 color options, multiple styles, and designs focused on durability, easy construction, and low maintenance. We provide open canopies, partially enclosed canopies, and carports customized for commercial or private use.

Condo storage, often sold rather than rented, is popular among RV owners, car collectors, and small businesses. Mini warehouses, typically leased, serve document storage and business inventory needs.

For those preferring open parking areas instead of individual units, Taylor Metal provides large clear-span building solutions, customized to any size or configuration.

Many new facilities or conversions now include climate-controlled units to provide additional options for customers.

Taylor Metal can design hall systems and temperature-controlled units as part of your project, helping you optimize the unit mix to maximize revenue.

Whether you're planning a single-level facility or multi-level buildings, we provide the expertise to create efficient layouts that maximize storage capacity. With a focus on ease of construction, low maintenance, and long-lasting durability, Taylor Metal offers a range of framing options suitable for any size or configuration, ensuring your mini storage facility is built to withstand the test of time.

When space is limited, multi-level buildings can turn a project into a profitable opportunity.

Whether you need free-standing multi-level buildings or “over-under" structures with ramped driveways for the upper level, Taylor Metal can design and supply the buildings and square footage that best fit your site.

Certain regions have a strong demand for large units designed for RV and boat storage. Sizes and configurations vary by market, but RVs typically require 14′ x 45′ units with 12′ x 14′ doors, while boats often need 12′ x 35′ spaces with 10′ x 10′ doors.

Single-level buildings are the most common and cost-effective option in the self-storage industry. They offer great flexibility, allowing for virtually any size, shape, or unit mix configuration.