Screw-On Pin Stone Anchor (276)

Made to Order

Thickness of Strap: 3/8", 1/4", 3/16", 1/8", 12 gauge, 14 gauge & 16 gauge.

Diameter of Pin: 1/4", 3/8", 1/2", 5/8" Strap Width: 1-1/4" minimum recommended.

Length: Specify length of strap to o.d. of bend and overall length of pin.

Bend Length: minimum 3/4" recommended (specify o.d. dimension)

Available in Type 304 and Type 316 Stainless Steel

Bend Hole: Usually centered in bend. Hole should be 1/16" larger than screw/expansion anchor. (i.e. If using a 1/4" screw the hole diameter would be 5/16".)

Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended.

Pins are available loose or welded in place.