Cast iron post  -  4-1/2″ W, 47″ H  -  Provided in two (2) sections.

Hm post - 1-1/8″ rd x 48″ h, 2 -3/4″ w

Classic design featuring smooth square baluster with double basket and twist sections on top and bottom. Available in 15/32″ sq., 9/16″ sq., and 5/8″ sq.

Hot forged double picket – 1/2″ rd. 39-3/8″ H. Light hammering.  Part of pairing family: 29-14-05, 26-2-02, 26-2-02D

Hot forged single picket – 1/2″ rd. 39-3/8″ H. Light hammering.  Part of pairing family: 29-14-05, 26-2-02, 26-2-02D

This solid steel, Italian-made wrought iron baluster is a stunning piece for any railing or staircase project. It features a light tapering that emanates from the geometric, collar-like feature in the center.

This solid steel, Italian-made wrought iron baluster is a stunning forged piece for any railing or staircase project. It features a light tapering that emanates from the center feature, starting at 1″ and ending at 1/2″.

Square post, smooth - 1″ sq. x 2-1/4″ diameter x 47-1/4″ H.   Matches DJA 191 and DJA 192 balusters.

Malleable Iron side-mount bracket for attaching pickets and spindles to the side of a staircase. Bracket includes a round flange with 3/8″ threaded hole for mounting hardware (not included), and a set screw for securing the baluster (Allen key included). Available in two sizes: small (for 1/2″ round) and large (5/8″ round). In typical setups, we recommend the small when fitting three balusters and brackets per stair tread, and the large when fitting two. P1647 is also available in brass and stainless steel.

Stainless Steel side-mount bracket for attaching pickets and spindles to the side of a staircase. Bracket includes a round flange with 3/8″ threaded hole for mounting hardware (not included), and a set screw for securing the baluster (Allen key included). Available for 1/2″ round only. This item (P1647) is also available in brass and malleable iron, for fitting 1/2″ and 5/8″ round bars/spindles/balusters.

This is the largest of our popular side-mount brackets for attaching pickets and spindles to the side of a staircase. We recommend using two of these brackets per stair tread. Placement and spacing should depend on your baluster design and local building code (e.g. 4″ gap requirement). Each bracket includes a round flange with 3/8″ thread. For smaller versions, check out our P1647 bracket available in malleable iron (unfinished), stainless steel (polished or brushed satin), and brass. As noted below, this bracket is unfinished malleable iron, and should be finished using paint, lacquer, or powder-coat.

Bracket – malleable iron – flat top. 3-1/2″ H, 3-1/4″ W, extends 2-7/8″ from wall.

Molded volute, cast iron, for 1-3/4″ handrail molding.

Lightly hammered picket 9/16″ rd x 47-1/4″ H. 1-3/16″ diameter double collar. 19″ collar center to center.

Lightly hammered picket 9/16″ rd x 47-1/4″ H. 1-3/16″ diameter single collar.

Square picket - 5/8″ x 39-3/8″ H

Square picket, 5/8″ sq. smooth. 1-5/8″ diameter single collar feature. Available in 39-3/8″ H or 59-1/4″ H.

Hammered Picket featuring scrolls and double-sided rosette - 9/16″ sq. x 39-3/8″ H.

Solid square hammered belly bar post. Available in 1″ or 1-3/16″ square, and 47″ or 51″ H.

Hammered Picket - 9/16″ sq. x 35-1/2″ H. 5 -1/2″ W.

Square hammered picket 9/16″ x 39-3/8″ H

Square hammered post 1″ x 47-1/4″ H

Square hammered picket – 9/16″ x 35-1/2″ H

Square hammered picket 9/16″ sq. Available in 35-1/2″ H or 39-3/8″ H.

Cast iron picket – 5/8″sq. – 4-1/2″ W x 29″ H

Raphael post, cast iron- 5″ octagonal base, 47-1/2″ H – Provided in two (2) sections.

Brittany post – cast iron – 3-3/4″ base , 50-1/2″ H – Provided in four (4) sections.

Cast iron post – 6″ W x 27″ H

Cast iron post – 2″ x 2-1/4″ base, 37″ H, 2-3/4″ sq. center

Double basket baluster, 15/32″ square. Solid steel. Available in 35-1/2″ H and 39-3/8″ H.

Post – 1-1/8″ rd. 47-1/4″ H, 2″ W center

Hammered double picket- 7/16″ rd x 39-3/8″ H,1″ W center

Hammered single picket - 7/16″ rd x 39-3/8″ H, 1″ W center

Hammered and hot forged double picket - 9/16″ sq. 39-3/8″ H, 1-3/8″ diameter

Single hammered and hot forged picket - 9/16″ sq., 1-3/8″ diameter center, 39-3/8″ H

Double picket - 7/16″ rd. 39-3/8″ H, 1-7/16″ W

Single picket - 7/16″ rd. 39-3/8″ H, 1-7/16″ W

Picket - 1/2″ sq. on end, 5/8″ sq. at center. 39-3/8″ H. Hammering on sides.

Hot forged solid steel square post. Available in 1″ and 1-3/16″. 48″ H

Ornamental steel solid square post with traditional twist and hammering on edges. 47-1/4″ H. Available in several sizes.

Smooth post  - 1″ sq. 47-1/4″ h

Square picket 9/16″ x 39-3/8″ h, 2-3/4″ diameter basket.

Double picket - 9/16″ sq. smooth; 39-3/8″ H

Single picket - 9/16″ sq. smooth; 39-3/8″ H

Ornamental steel solid square post with traditional twist and smooth material (no hammering). 47-1/4″ H. Available in several sizes.

Beautiful ornamental steel solid post with twist feature and tapered profile at top. Available in 1″, 1-3/16″ and 1-9/16″ sq.

Middle section of p500/z. 2-1/8″ d, 9-1/4″ h

Tapered sq. picket 3/4″ x 47″ h. 2-3/4″ W at widest point.

Tapered picket 1/2″ rd. ends, 1-3/8″ center, 39-3/8″ h

Tapered squar picket - 3/4″ bottom to 1/2″ top - 43″ h

Tapered square post - 1-3/8″ bottom to 7/8″ top - 47″ h

Tapered round post 15/16″ top, 1-3/8″ bottom, 39-3/8″ H.

Square post 1″ x 47-1/4″ h, 2-3/8″ c

Hammered square post with beautiful and unique twist feature. Lightly hammered texture.

Baluster (or small post) 5/8″ sq. hammered, available in 39-3/8″, or 47″ H. Collar is 1-1/2″ diameter.

Newel post 3/4″ sq. hammered, available in 35-1/2″, 40″ or 60″ H. Collar is 2-1/8″ diameter.

Hammered square post available in 1″ and 1-3/16″ square.

Hammered square post with beautiful and unique twist feature. Tapers toward top. Available in 1″ sq.

Square post with hammering on sides and edges. Available in 1″ and 1-3/16″ sq.

Tapered round baluster. Available from 5/8″ bottom to 3/8″ top; or 1″ bottom to 1/2″ top. Height varies.

Central part of P012/F. Can be used in custom fabrication designs and newel posts.

Hm picket w/ basket 9/16″ sq. 39-3/8″ h

Hm double picket - 9/16″ sq x 39-3/8″ h

Hm single picket - 9/16″ sq x 39-3/8″ h

Contemporary modern picket design. Tapers from center to ends. Available as 1″ center tapering to 1/2″ rd. ends, or 9/16″ center tapering to 1/4″ rd. ends.

The hand forging process of this piece gives it a more organic look than other basket component items. Available in 1″ sq. and 1-3/16″ sq.

Hm post - 1″sq x 47-1/4″ h, 2-3/4″ c

Hm picket 9/16″ sq x 39-3/8″ h, 1-1/4″ C

Hm double picket 9/16″ sq x 39-3/8″ h, 1-3/16″ w

Hm picket 9/16″ sq x 39-3/8″ h, 1-3/16″ w

Sq. picket 9/16″ x 39-3/8″ h, 1-3/16″ c

Sq. picket 9/16″ x 39-3/8″ h, 1-3/16″ c

Hm db picket - 9/16″ sq.39-3/8″ h x 1-3/16″ w

Hm single picket - 9/16″sq x 39-3/8″ h

Hm double picket - 9/16″ sq x 39-3/8″ h

Hm picket - 9/16″ sq. 39-3/8″h x 1-3/16″w

Hm picket 9/16″ sq x 39-3/8″ h. 1-9/16″ on center.

Hot forged and hammered square picket that tapers from center.

Hammered square bar matches most hammered pickets and posts to complete your fabrication designs. Choose your size and height.

Wrought iron double square baluster with hammering on sides and edges. Choose size and height.

Hm sq. post 1-3/8″ x 48″ h, 1-3/4″ center width

Square post - 1-3/16″ x 47-1/4″ h

Wrought iron single square baluster with hammering on sides and edges. Choose size and height.

Hot forged and hammered square picket that tapers from center collar feature. Available in two heights: 39-3/8″ or 47″.

Smooth twist post with basket. Available in 1″ sq. and 1-3/16″ sq. 47-1/4″ H

Available in 1″ sq. and 1-3/16″ sq.

Newel post with basket, textured finish. Available in 1″ sq. and 1-3/16″ sq. 47-1/4″ H

Smooth post with basket. Available in 1″ sq. and 1-3/16″ sq. 47-1/4″ H

Hammered square post available in 1″ sq. or 1-3/16″.

Hot forged, hammered texture square newel post. Available in 1″ sq. and 1-3/16″ sq.

Classic design featuring smooth square baluster with single basket and twist sections on top and bottom. Available in 15/32″ sq., 9/16″ sq., and 5/8″ sq.

Double basket baluster. Available in 9/16″ sq. and 5/8″ sq.

Double basket picket 9/16″ sq x 39-3/8″ h. Smooth texture. Solid steel.

Square picket w/ basket 9/16″ x 39-3/8″ h. Smooth texture. Solid steel.

Double basket picket 15/32″ sq. 39-3/8″ H. Solid steel. Edges have hammered texture.

Single basket picket 15/32″ sq. 39-3/8″ H. Solid steel. Edges have hammered texture.

Hm bar 9/16″ sq x 39-3/8″ h

Single basket baluster. Available in 9/16″ sq. and 5/8″ sq.

Single basket picket with twist sections. Available in 9/16″ sq. and 5/8″ sq.

Double basket picket with twist sections. Available in 9/16″ sq. and 5/8″ sq.

Classic post design featuring basket and two small sections with twist. Available in 1″ sq. and 1-3/16″ sq. 47-1/4″ H

Available in 1″ sq. and 1-3/16″ sq. 47-1/4″ H

Single basket baluster, 15/32″ square. Solid steel. Available in 35-1/2″ H and 39-3/8″ H.

This round newel post evokes the styles commonly seen in New Orleans or historic East Coast cities. But unlike the brittle cast iron of those days, this piece features a malleable iron center section with steel end bars for easy welding, strength and durability.

25/32″ ends x 45-1/2″ H, 2″ W center. Center section is approximately 26″ H. Ends are approximately 9-3/4″ long.

9/16″ ends x 45-1/4″ H, 1-7/16″ W center. Center section is approximately 25-1/8″ H. Ends are approximately 10-1/16″ long.

5/8″ ends x 45-1/4″ H, 1-7/16″ W center. Center section is approximately 25-1/8″ H. Ends are approximately 10-1/16″ long.

1-3/8″ square end at bottom, 1-3/16″ square end at top. 49-5/8″ H, 2-5/8″ diameter center. Center section is approximately 29-1/8″ H. Ends are approximately 14″ long at bottom and 6-1/2″ at top. Also available with rounds ends (P111). Center section is available as a matching steel pipe collar (DJA203).

Hot forged rd. post 1-3/16″ diameter, 51″ H, 2-1/4″ W knuckle feature.

Double picket - 1/2″ rd. 39-3/8″ H, 1-3/8″ W.

Single picket - 1/2″ rd., 1-3/8″ W. center feature. Choose from 39-3/8″ H or 47″ H.

Solid round bar with hammered texture

This solid steel, Italian-made post is a stunning piece for any railing or staircase project. Made from a hot forging process, it features a unique octagonal profile shape and three ultra-detailed bulb accent elements.

This solid steel, Italian-made wrought iron baluster is a stunning piece for any railing or staircase project. It features a unique octagonal profile shape and three bulb accent elements.

This solid steel, Italian-made post is a stunning piece for any railing or staircase project. It features a beautiful curved profile along each face of the square bar, punctuated by ultra-detailed collar accent elements.

This solid steel, Italian-made post is a stunning piece for any railing or staircase project. It features an intricately detailed spiral twist, round bar and three collar accent elements.

This solid steel, Italian-made baluster is a stunning piece for any railing or staircase project. It features an intricately detailed and ridged round bar and three bulb accent elements.

This solid steel, Italian-made and wrought iron post is a classic piece for any railing or staircase project. It features a round hammered bar and a center, spherical collar-like element made from the bar itself.

This solid steel, Italian-made and wrought iron baluster is a classic piece for any railing or staircase project. It features a round hammered bar and a center, spherical collar-like element made from the bar itself.

This solid steel, Italian-made wrought iron post is a hot forged round bar. This is a wonderful post option for interior or exterior railing projects using round collar features.

This solid steel, Italian-made and hand forged wrought iron baluster is a unique and creative piece that combines several fishtail scroll workpieces with decorative clips (in total there are four components). Pair with other scroll components to create a beautiful design motif in your next railing project.

This solid steel, Italian-made wrought iron post features a hammered texture on all four edges, along with a finial element forged right from the bar! This is a wonderful post option for interior or exterior railing projects using a hammered texture motif.

This solid steel, Italian-made and hand forged wrought iron baluster is a stunning piece that would shine in classic or contemporary railing or staircase project. Made from two identical pieces, it features a light tapering and center fishtails that form an “infinity" symbol when viewed from the side.

This solid steel, Italian-made wrought iron baluster is a stunning piece for any railing or staircase project. It features a classy tapering that emanates from the round element feature in the center.

This solid steel, Italian-made wrought iron baluster is a stunning piece for any railing or staircase project. It features a classy tapering that emanates from the square element feature in the center.

This solid steel, Italian-made wrought iron post is a hand forged twist rope made from 10 pieces of 5/16″ round bar. Love the twist rope but need something to match your basket pickets? This post features a large basket element for a wonderful pairing option for your interior or exterior railing project.

This solid steel, Italian-made wrought iron post is a hand forged twist rope made from 10 pieces of 5/16″ round bar. Pair it with similar components to create a unique “rope" look for your interior or exterior railing project.

This solid steel, Italian-made and hammered wrought iron post is a statement piece for any railing or staircase project. It features four hand forged leaves, arranged one on each side, to form a floral center feature.

This solid steel, Italian-made and hand forged wrought iron post is an impressive piece for any railing or staircase project. It features gradual ribbon twist accents on the surface throughout.

This solid steel, Italian-made baluster is a stunning piece for any modern railing or staircase project. It features an oversized twist element made from the bar itself.

This solid steel, hand forged and Italian-made baluster is a stunning piece for any modern railing or staircase project. It features a sharply tapered profile and off-centered double-leaf feature made from the bar itself.

This solid steel, Italian-made baluster is a stunning piece for any railing or staircase project. It features a hammered bar and bowtie center element.

This solid steel, hand forged and Italian-made baluster is a stunning one-of-a-kind piece for any railing or staircase project. Made from (2) clipped 5/8″ square hammered bars, it features half-circle scrolls to form a ring.

This solid steel, hand forged and Italian-made wrought iron picket is a stunning one-of-a-kind piece for any railing or staircase project. Made from (2) riveted 5/8″ square hammered bars, it features symmetrical scrolls.

This solid steel, Made in Italy wrought iron post features an integrated collar-like element (no separate welded piece here!) and is a stunning design for any railing or staircase project. Available in smooth or hammered (shown).

This solid steel, Made in Italy wrought iron post is a stunning piece for any railing or staircase project. Made from 1″ round smooth bar, it features a single, thin collar for a modern, geometric look.

This solid steel, Made in Italy wrought iron post is a stunning piece for any railing or staircase project. A popular off-center collar is featured.

This solid steel, Made in Italy wrought iron post is a stunning piece for any railing or staircase project. A popular off-center twist section is featured.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project. A centered sphere is featured as the piece tapers down to 9/16″.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project. It featured a hammered texture and a curved bulb-like feature in the center.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project. It featured a hammered texture and a modern geometric cube feature in the center.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project. Two double-sided rosettes are featured.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project. A centered, double-sided rosette is featured.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project.

This solid steel, Made in Italy wrought iron baluster, or spindle, is a stunning piece for any railing or staircase project.

Matching scroll for DJA161, DJA162, P918S, P918B, P918N. 5/8″ x 3/8″ smooth flat material, 37″ H , 5″ W

Hand forged panel featuring floral elements and C scrolls. 5/8″ x 3/8″ smooth, 11-7/8″ W x 35-1/2″ H.

Hand forged panel featuring floral elements and C scrolls. 5/8″ x 3/8″ smooth, 23-5/8″ W x 35-1/2″ H.

Hand forged panel featuring floral elements and C scrolls. Pitched at 32 degrees. 5/8″ x 3/8″ smooth, 11-7/8″ W x 29-1/2″ H.

Vertical wrought iron panel, hand forged. Perfect for balconies, railings and guardrails. 39-3/8″ H x 7-1/2″ W. Smooth material (no hammering).

Vertical wrought iron panel, hand forged. Perfect for balconies, railings and guardrails. 39-3/8″ H x 7-1/2″ W. Smooth material (no hammering).

Beautiful wrought iron panel, hand forged. 23-3/8″ diameter. Features center double-sided rosette.

Beautiful wrought iron panel, hand forged. 29-1/2″ diameter. Features center double-sided rosette.

Hammered double scroll, 25/32″ x 25/64″ material , 7″ W x 19″ H

Hammered scroll matching DJA498, 25/32″ x 25/64″ material, 5-1/4″ W x 30″ long

Hammered panel straight, 25/32″ x 25/64″ material, 38-5/8″ W x 28-3/4″ H

Hammered panel, pitched for stairs. 25/32″ x 25/64″ material , 31-3/4″ W x 23-1/2″ H

Hammered scroll, 25/32″ x 25/64″ material , 12″ W x 4-1/4″ H

Matching scroll for DJA197,DJA198 – 25/32″ x 3/8″ , 4-3/4″ W x 29-1/2″ H

Panel – 25/32″ x 3/8″, 28-3/4″ H, 33-1/2″ W. Hand forged. Steel. Smooth texture, no hammering.

Beautiful and unique scroll design, hand forged – 5/8″ x 5/16″, 3-1/2″ H, 9-3/4″ W

C-scroll: 25/32″ x 3/8″ smooth flat material. 12-3/4″ W x 3-7/8″ H

C-scroll – 5/8″ x 5/16″ smooth flat material. 2-3/4″ H x 8″ W.

C-sroll – 5/8″ x 5/16″, 5-1/4″ H , 2-1/2″ W. Hand forged. Steel.

C-scroll – 5/8″ x 5/16″, 5″ H , 4″ W. Hand forged. Steel.

S-scroll – 5/8″ x 5/16″ – 7-1/2″ H. 4-1/4″ W. Hand forged. Steel.

This scroll is a perfect accompaniment to the PB-17 belly bar and features a curve to match the belly profile. Choose left or right, and material size.

S-scroll – 5/8″ x 5/16″, 9-7/8″ H, 4-1/4″ W. Hand forged. Steel.

S-scroll – 5/8 x 5/16″, 8-3/4″ H, 4-1/4″ W. Hand forged. Steel.

S-scroll – 5/8 x 5/16, 10″ H, 3-7/8″ W. Hand forged. Steel.

C-scroll 3/4″ x 3/8″. 2-7/8″ H x 4-1/2″ W. Hand forged. Steel.

Double S-scroll with center band. Choose from small size (1/2″ sq.) or large size (9/16″ sq.).

Double S-scroll with center ring and connecting bands. Choose from small size (1/2″ sq.) or large size (9/16″ sq.).

C-scroll – 2-3/4″ H x 3-7/8″ W. Hand forged. Steel. Choose from 3/4″ x 3/8″ or 5/8″ x 5/16″ material size.

S-scroll, hand forged. Steel. 5/8″ x 5/16″ – 8-3/4″ H. Select from 4″ W or 4-1/4″ W.

Hammered scroll with circle 5/8″ x 5/16″, 15-1/4″ W, 3-3/4″ H.

C-scroll, hand forged. Steel. 4″ H x 6-3/8″ W. Available in 5/8″ x 3/8″ or 3/4″ x 3/8″ material size.

Scroll for 49/02 – 5/16″ x 3/4″ hmm 29″ H x 5-1/4″ W

Wrought iron steel panel with double-sided rosettes and scroll leaves. 5/16″ x 3/4″ hammered material. 33-1/2″ H x 31-1/2″ W

Wrought iron steel panel with double-sided rosettes and scroll leaves, pitched at 30 degrees. 5/16″ x 3/4″ hammered material.

Cast iron frieze – 4-1/8″ W x 31-3/8″ H

Cast iron panel – 8-1/4″ W x 30-3/4″ H

Cast iron panel design – 5-3/4″ W x 15″ H

Bird of paradise- short – 8-1/2″ W x 15-1/2″ H

Cast iron rose design for 1/2″ sq. bar – 7-3/4″ W x 16-3/4″ H

Cast iron corner rose panel – 18-1/4″ W x 18-1/4″ H

Cast iron rose panel – 8-5/8″ W x 28-1/4″ H

Greek key – steel. 15/32″ material, 4-3/4″ H x 39-3/8″ W

Greek key – cast iron – 3-3/4″ H x 14-7/8″ W

Cast iron scroll panel – 9″ W x 31-1/2″ H

Cast iron gate topper – 10″ H x 21-3/4″ W – single faced

Cast iron double “c" for 1/2″ square picket – 3″ x 3″

Cast iron double “c" for 1/2″ sq. – 4″ w x 4″ h. Material 9/16″ thick

Cast iron panel – 15-1/4″ W x 27-1/2″ H

Cast iron panel design with scroll and clip features – 7-3/4″ W x 17-5/8″ H. For 1/2″ square bar.

Cast iron – royal crest – 11-1/2″ W x 23-3/4″ H

Double C for 1/2″ square – 5-1/4″ W x 4″ H. Matches panels 146 and 147.

Bird of paradise – 29-1/8″ H x 7-3/4″ W

Cast iron panel design that fits 1/2″ square bar material. Choose from two sizes: 18″ H x 8-1/2″ W and 12-1/2″ H x 6-1/2″ W.

This cast iron scroll pattern fits 1/2″ square bar. Available in two sizes: 15″ H x 8″ W and 12″ H x 6″ W.

Scroll pattern – 9/16″ rd. smooth; 39-3/8″ H, 10″ W

Picket -15/32″ sq. smooth; 39-3/8″ H. 8-7/16 " W.

Panel – 9/16 " rd, 35-1/2″ h x 13-3/4″ w

Matching hot forged scroll for P980N, DJA990, DJA990S, DJA 991, DJA992. 5/8″ x 5/16″ flat bar.

Panel – 12″ x 36-3/4″, 5/8″ x 5/16″ flat. Double-sided leaf feature.

Panel 23-1/2″ w x 36-3/4″ h, 5/8″ x 5/16″ flat. Double-sided leaf feature.

Italian-made hot forged panel built at 30 degrees for railing applications. Three scrolls are unattached for easy fabrication assembly. – 12″ x 30″, 5/8″ x 5/16″ flat.

Matching scroll for P-Series line of ornamental panels. Hot forged steel. 4″ W x 33″ H, 5/8″ x 5/16″ flat bar. Made in Italy

Cast iron “vineyard" panel with grape and leaves motif – for 1/2″ sq. 15-1/4″ H x 7-1/2″ W

Panel – 5/8″ sq, 8-1/2″ w x 39-3/8″ h

Italian-made panel built at 38 degrees for railing applications. Supplied in sections. Matching clips available (see P accessories). Pair with P980N. – 24″ w x 32-1/2″ h skewed

Italian-made panel built at 38 degrees for railing applications. Supplied in sections. Matching clips available (see P accessories). Pair with DJAP980. – 24″ w x 32-1/2″ h skewed

Panel – 15/32″ sq, 8-1/4″ w x 39-3/8″ h. Collar (P2327AQ) is provided loose.

Panel – 5/8″ sq, 8-1/2″ w x 39-3/8″ h. Collar (P2327AQ) is provided loose.

Panel – 5/8″ sq, 8-1/2″ w x 39-3/8″ h. Uses scrolls 52-8-01 and 52-8-03.

Panel – 30″ w x 35-1/2″ h, 5/8″ x 5/16″. 5/8″ square center bar.

Beautiful Italian-made ornamental panel for railings, balconies, and fences. Pair with P988. – 30″ w x 35-1/2″ h, 5/8″ x 5/16″. 5/8″ square center bar.

Hand forged by Italian artisans, this solid iron baluster panel features a large S shape scrollwork, and is a great way to get that ornate scrollwork look. Fill out an entire railing and landing. Or incorporate the components into your own stunning creation.

Hand forged by Italian artisans, this collection of solid iron baluster S scrolls is a great way to get that ornate scrollwork look. Choose from twist or smooth, and use the small and large sizes to fill out an entire railing and landing. Or incorporate the components into your own stunning creation.

This solid steel, Italian-made and forged wrought iron panel is an piece that features scroll, rosette, and twist elements to go with a variety of design motifs. The symmetrical design includes double-sided rosettes.

This solid steel, Italian-made wrought iron baluster is a unique piece for any railing or staircase project. It features a forged hammering throughout, with center rosette design and four fishtail scrolls, two on each end and secured to the bar with decorative clip.

This solid steel, hand forged and Italian-made baluster is a stunning one-of-a-kind piece for any railing or staircase project. Made from (2) clipped 5/8″ square hammered bars, it features half-circle scrolls to form a ring in the center. Matching scrolls form the ends of the baluster.

Cast iron spear available in two sizes, for 1/2″ square and 5/8″ square.

Solid steel pineapple newel post finial. Available in 3 sizes. Round base, no blind hole.

Beautiful hot forged spear for gates and fences. Choose from two sizes.

Decorative wrought iron finial. Matches panels P918N, P918B, and P918S. 1-9/16″ round base, 2-1/4″ D, 8-1/2″ H

Steel oval-shaped spear with ball tip. Available for 15/32″ sq., 9/16″ sq., 5/8″ sq. Overall height: 6-3/4″

Cast iron spear for 1/2″ sq.

Cast iron spear for 5/8″ sq. , 3″ W x 5-1/2″ H

Cast iron spear with ball. Available for 1/2″, 5/8″ and 3/4″ square.

Cast iron fleur de lis spear available for 1/2″, 5/8″ or 3/4″ square material size.

Cast iron spear for 3/4″ sq. 2″ W x 5″ H

Cast iron topper for 6000-X post – 7″ H x 2-1/2″ W

Cast iron spear for 5/8″ sq. , 3-1/4″ W , 5″ H

Cast iron spear available in three sizes, for 1/2″, 5/8″ and 3/4″ square

Spear – 1-3/16″ base, 5-3/4″ h, 3-1/8″ w. No blind hole.

Steel spear – 1-3/8″ base 7-7/8″ h, 2-5/8″ w. No blind hole.

Steel spear -hot forged, 1-3/16″ D 5-1/8″ H. No blind hole.

Steel spear – hot forged, 1-1/8″ base 6-1/4″ H, 2-1/4″ W. No blind hole.

Steel spear – 1-3/8″ base 7-7/8″ H, 2-3/4″ W. No blind hole.

Steel spear – 1-1/2″ base 9-1/4″ H, 3-1/4″ W. No blind hole.

Solid steel ball cap finial with square base. No blind hole. Available in several sizes.

This stainless steel finial for round bars is designed and made in Italy. The beautiful brushed satin finish pairs nicely with many of our stainless steel components, and goes great with other materials such as glass, woods, and granite. Mix and match to create a modern railing design that is uniquely yours. Available for 15/32″ (12 mm) and 1/2″ round bar.

This component is part of our stainless steel mechanical, no-weld system.

Steel collar that fits 1″ round bar or 1-1/4″ round bar. Select material size.

Sleeve – 3-1/4″ diameter, 13-7/8″ H , 1-11/16″ rd hole., fits 1-1/4″ pipe. Cast steel

Cast iron collar with sizes to fit various sizes. Select material size to fit over.

Cast iron collar with sizes to fit various square sizes. Select material size to fit over.

High polish, clear lacquered brass collar – for 5/8″ round bar. 5-1/2″ H 1-9/16″ diameter

Split collar, 2 part, brass collar, high polish & clear lacquered, for 5/8″ rd bar. Includes set screw.

Collar – for 1″ round, 2 " h. 2-3/4″ d.

Beautiful brass collar for 5/8″ round bar. Choose high polish brass or gold-plated finish.

Steel collar that fits 3/4″ square bar or 1″ square bar. Select material size.

Steel collar that fits 3/4″ square bar or 1″ square bar. Select material size.

Steel collar that fits 1/2″ round or 5/8″ round bar. Select material size.

Cast steel collar for square bar material. Available for several sizes

This solid steel, Made in Italy stamped leaf is a great accent piece to complement scrolls, panels and other patterns in your ornamental metals project. Single-sided face featuring a 1/4″ round stem for easy integration with your designs.

Large matching steel leaf for Grape Bunch, for qc-31/06. 

Small matching steel leaf for Grape Bunch, for  qc-31/05.

Large steel leaf – overall 12″ H. 1″ x 5/16″ base, 6-1/2″ H, 2″ W

Large steel leaf – overall 8-1/2″ H. 1″ x 5/16″ base, 5-1/2″ H, 2″ W

Large steel leaf – overall 12″ H. 1″ x 5/16″ base, 6-1/2″ H base, 2″ W

Decorative steel grape leaf, hot forged. Available in two sizes.

Hot forged leaf that fits 5/8″ square material in center. – 8-1/2″ W x 2-1/2″ H x 2″ Depth – 1/8″ thick material

Leaf 5-1/2″ H x 8-1/4″ W, 1/8″ thick. Matches various P-series panel designs.

This solid steel, Made in Italy stamped Acanthus leaf is a great accent piece to complement scrolls, panels and other patterns in your ornamental metals project.

Ornamental steel leaf with no stem. 1-3/4″ H x 1-3/16″ W x 16 ga. thick. Mill finish / unpainted.

This two piece split shoe for square balusters, pickets and posts wraps around the base of a square bar and is a great way to finish off or retrofit a railing or fence project. Cover up drill holes, mismatched concrete or caulking, all without uninstalling or disassembling the project. All you need is a screwdriver!

This two piece split shoe cover plate wraps around the base of a post and is a great way to finish off or retrofit a railing or fence project. Cover up unsightly flanges, base plates, bolts or fasteners, all without uninstalling or disassembling the project.

This two part cover flange wraps around the base of a post and is a great way to finish off a stainless steel railing or fence project. Cover up unsightly flanges, base plates, fasteners, or cement or caulking that doesn't match the surrounding surface.

Standard base shoe available in aluminum and cast iron for various square material sizes: 1/2″, 1″, 1-1/4″, 1-1/2″.

Cast iron base shoe with two mounting holes. Choose size to fit 1″ square or 1-1/4″ square material.

Cast iron shoe for 1″ sq.; 1-1/8″ H 2″ sq. W

Cast iron shoe with two mounting holes, fits 1/2″ sq, 5/8″ sq and 3/4″ sq. Select material size to fit over.

Cast iron shoe for balusters, pitched at approximately 40 degrees. Includes set screw. Select material size to fit over (1/2″ sq., 5/8″ sq., or 9/16″ sq.).

Cast iron shoe including set screw for balusters. Fits over 1/2″ sq or 5/8″ sq.

This two piece split shoe for round posts and newels wraps around the base of a round bar and is a great way to finish off or retrofit a railing or fence project. Cover up drill holes, mismatched concrete or caulking, all without uninstalling or disassembling the project. All you need is a screwdriver!

Wide 3″ Crystal Finial with Brass Base

2″ Bubble Murano Crystal Finial “Egg" with Brass Base

2″ Crystal Finial with Brass Base. Made in Italy.

Jade Green 1-1/4″ Crystal Finial with Brass Base

3″ Turquoise Crystal Finial with Brass Base

3-1/8″ Crystal Finial with Brass Base

3-1/4″ Crystal Finial with Brass Base

4″ Crystal Finial with Brass Base. Made in Italy.

4-1/2″ Crystal Finial with Brass Base. A perfect addition to Victorian-style homes!

4-1/2″ Crystal Finial with Brass Base, Italian made.

This beautiful brass door knocker is a wonderful addition to any exterior door. Made in Italy. Choose from antique or polished finish.

Beautiful wrought iron door knocker with twist and hook elements, hand forged by artisans in Italy. A wonderful addition to any exterior door. Hand painted in antique black finish.

Beautiful wrought iron door knocker, hand forged by artisans in Italy. A wonderful addition to any exterior door. Hand painted in antique black finish.

Beautiful wrought iron door knocker, hand forged by artisans in Italy. A wonderful addition to any exterior door. Hand painted in antique black finish.

This golf-inspired wall mounted coat rack is both decorative and functional. It features three metal golf ball finial hooks on a rectangular wood plaque base made from Brazilian walnut. Choose from three finishes for the hooks. Assembled in USA.

This golf-inspired wall mounted coat rack is both decorative and functional. It features three metal golf finial hooks on a rectangular wood plaque base made from oak. Choose from three finishes for the hooks. Assembled in USA.

This golf-inspired wall mounted coat rack is both decorative and functional. It features a single center metal golf ball finial hook on a round tree trunk wood base. Choose from three finishes for the hooks. Assembled in USA.

This golf-inspired wall mounted coat rack is both decorative and functional. It features a metal golf ball finial hook on a teardrop-shaped plaque base made from Brazilian walnut. Choose from three finishes for the hook. Assembled in USA.

This golf-inspired wall mounted coat rack is both decorative and functional. It features a metal golf ball finial hook on a teardrop-shaped plaque base made from solid oak. Choose from three finishes for the hook. Assembled in USA.

Ornamental Steel Sign Holder: 31-1/2″ H x 39-3/8″ W

Ornamental Steel Sign Holder: 39-3/8″ H x 39-3/8″ W

Calling all Leos: feast your eyes on this beautiful lion head face plate that is perfect for gates, doors and walls.

Gate Stop is the ideal gate alignment device for preventing hinge, latch and gate damage and for prolonging gate life.

It is molded from high strength polymer materials and is guaranteed against rust distortion and staining. An integrated rubber buffer protects against gate slam and reduces noise significantly.
This increases the life of the hinge and the gate considerably and will require less need for frequent gate adjustment and re-alignment.

A general-purpose, magnetic gate latch that offers simple, effective latching for many home and garden gates, and some swimming pool gate applications.

The Australian-designed-and-made MagnaLatch® Vertical Pull gate latch is the ideal gate latch for use on front gates, pet gates, side gates and perimeter gates. Series 3 model features visible locked/unlocked indicator. Rekeyable security lock.

The MagnaLatch child safety gate latch from D&D Technologies is one of the safest and most trusted gate latches on the market. Series 3 model features visible locked/unlocked indicator. Rekeyable security lock.

This general purpose key lockable gate latch from D&D Technologies is ideal for home and garden gates. Strong polymer design will not rust or stain. Does not include External Access Kit. Color: Black.

This is a high-quality, heavy duty drop-bolt for retaining and securing driveway and other residential or commercial gates. 18″ bolt length. Black.

Zinc-Plated Slide Bolt Latch. Reversible for Left and Right. Can be used with padlock. Available in two sizes: 1/2″ and 5/8″.

DJA Adjustable Barrel Hinge adjusts in three dimensions and brings ultimate flexibility to this heavy duty hinge. Maximum capacity 3450 LBS at 6′ 8″ H x 6′ 8″ L gate. See full line of hinges. 

Heavy duty and high-quality bottom support weld-on hinge with thrust bearing and grease fitting. Sizes available for weight capacities from 375 to 2646 lbs.

C92-X (weldable) and C92-XP (wood-mount) are adjustable side-mount hinges. Available in zinc-plated galvanized steel. Weight Capacity 600 LBS/pair. C92-XL features a double bearing and a weight capacity of 1000 LBS/pair.

CA345 Family of Adjustable Bearing Hinges. Hinges are adjustable and locked in place with a set screw. Available in zinc-plated galvanized steel and stainless steel.

Adjustable Hinge Set: DJA 227 (top) + CA347R-DJA (Bottom). Maximum Weight Capacity 600 LBS.

The TruClose heavy duty round post hinge from D&D Technologies supports gates up to 132 lbs. Sold individually.

The TruClose 3-way adjustable heavy duty hinge from D&D Technologies supports wood and vinyl gates up to 132 lbs (weight capacity per pair). Sold individually. For square/rectangular posts.

The TruClose self-closing heavy duty hinge from D&D Technologies supports gates up to 154 lbs. Sold individually. Series 3, 2 legs, black.

Adjustable, self closing hinges for pool & safety gates from D&D Technologies. No legs. Adjustable self-close tension. Supports gates up to 66 lbs, per pair. Sold individually.

All-in-one hinge and closer system, self-closing up to 250 lbs. gate weight capacity. 180 degree capable. Zinc-plated finish, paintable.

This D&D Technologies SureClose ReadyFit weld-on hinge can support up to 1500 lbs. per pair. This is non-self-closing model. D&D SKU 74001315

Hydraulic SureClose® Gate Closers & Hinges are designed to replace conventional, bulky commercial gate hinges and closers. These strong and sturdy hinge-closers provide smooth, bind-free performance. D&D SKU 74108325

Segmented, medium duty pin hinge featuring two closed wings with bearing. Perfect for steel doors and windows. Available in steel. Choose from varying heights and a weight capacity of 400 lb per pair.

Segmented, medium duty pin hinge featuring two closed wings with removable bearing. Perfect for steel doors and windows. Available in zinc-plated galvanized steel or stainless steel. Choose from weight capacity 130 lb per pair, up to 340 lb per pair.

Segmented, heavy duty pin hinge featuring two open wings with removable bearing. Perfect for steel doors and windows. Available in zinc-plated galvanized steel. Choose from weight capacity 560 lb per pair, or 1200 lb per pair. Pin diameter is 3/4″.

Segmented, heavy duty pin hinge featuring two closed wings with removable bearing. Perfect for steel doors and windows. Available in zinc-plated galvanized steel. Choose from weight capacity 270 lb per pair, or 660 lb per pair. Pin diameter is 3/4″.

Adjustable weld-on hinge with U-bolt for 180-degree swing gates. Available in zinc-plated galvanized steel. Choose from weight capacity of 200 lb per pair, or 300 lb per pair. Thread is MA 16.

Clamp-on hinge with grease fitting, for thread rod side-mounting. Available in zinc-plated galvanized steel for threaded rods MA18, MA22 and MA27 (not included).

Segmented, heavy duty pin hinge featuring two closed wings with removable pin. Perfect for steel doors and windows. Available in stainless steel. Weight capacity is 270 lb per pair.

Segmented, heavy duty pin hinge featuring three open wings with removable pin. Perfect for steel doors and windows. Available in stainless steel. Weight capacity is 930 lb per pair.

Segmented, heavy duty pin hinge featuring two wings with brass pin. Perfect for steel doors and windows. Available in steel. Weight capacity is 550 lb per pair.

Segmented, heavy duty pin hinge featuring two wings with brass pin and bearing. Perfect for steel doors and windows. Available in steel. Weight capacity is 550 lb per pair.

Segmented, heavy duty pin hinge featuring four open wings with removable bearing. Perfect for steel doors and windows. Available in zinc-plated galvanized steel. Weight capacity is 670 lb per pair. Pin diameter is 3/4″.

Segmented, heavy duty pin hinge featuring four closed wings with removable bearing. Perfect for steel doors and windows. Available in zinc-plated galvanized steel. Weight capacity is 470 lb per pair. Pin diameter is 3/4″.

Gate box for chainlink gates. Fits gate size 1-5/8″. Compatible with Lockey 2985 lever handle.

Double hole lock box. 2-1/8″ hole with 2-3/8″ backset. Available for 1″, 1-1/4″ and 1-1/2″.

Single hole lock box. 2-1/8″ hole with 2-3/8″ backset. Available for 1″, 1-1/4″ and 1-1/2″.

The BiFold Gate solution is a game-changer for adding a trackless gate to smaller openings. Cover up to 16-ft openings with one of these hardware kits, and add a second for more (for up to 32 feet).

The BiFold Gate Hardware solution has become a game-changer for adding a trackless swing gate to areas with limited space, and it's the only complete kit on the market with all the hardware and hinges you need. With this new heavy duty version of the original, you can now add a bifold solution to heavier gates and cover larger openings! Cover up to 26-ft openings with one of these hardware kits, and add a second for more (for up to 52 feet!).

The MonoSilent System Kit bundles the key components you need to add an overhead track system to doors up to 60″ wide and 260 lbs.

Wall support bracket for KS80/C and KS80/E. 1-9/16″ W x 1-7/32″ D x 7/8″ H

Wall support bracket for KS120/C and KS120/E. 1-9/16″ W x 1-3/8″ D x 15/16″ H

Ceiling support bracket for KS80/C and KS80/E. 1-9/16″ W x 1-31/32″ L