CONTACT INFO
CONTENT
COMPANY OVERVIEW
ISE Logik is the #1 specialist in moisture vapor mitigation for new concrete slab construction or floor renovation over existing concrete. No one is more knowledgeable and more dedicated to stopping moisture vapor in its tracks , in floors and roof decks, than ISE Logik.
Founders David Seland and Dean Craft bring a combined 50 years of experience in the construction products and application industries. They provide an unsurpassed base of knowledge and experience for overcoming the challenges of concrete moisture in flooring and roofing systems. ISE Logik is also a leader in educating the industry through webinars and articles; as well as participating on various ASTM committees for establishing standards and best practices in roofing, flooring, and waterproofing.
• Our products admixture and topical coatings are listed as Construction Products—Building Products Category in Division 3 (Concrete) and Division 9 (Finishes-Flooring).
• Select ISE Logik products also carry HPD labeling and are found in Sustainable Minds and BIM.
• For new concrete, ISE Logik admixtures are formulated to stop moisture migration and warranted to 100% RH with no moisture testing required.
• For existing concrete, ISE Logik provides effective moisture vapor control with its 1-part topical coating that eliminates moisture testing and cures in just 8 hours.
ISE Logik sponsors the World Floor Covering Association (WFCA), International Certified Flooring Installers (CFI), The Flooring Contractors Association (FCICA), Construction Specifiers Institute (CSI), Single Ply Roofing Systems (SPRI), and Architects, Engineers, Construction (AEC). It is an on-going participant and presenter of CEU courses on AEC Daily, American Training Solutions, The Construction Specifier, Architectural Record and FCICA.
The Secret to Moisture Mitigation is Pure Logik: ISE Logik
ALL PRODUCTS
{{this.show}} {{this.hide}} ISE Logik Industries Admixtures
ISE Logik Industries - MVRA 900
ISE Logik Industries MVRA 900, a Certified ASTM C494 Type S Admixture, is formulated to react with the hydroxide ions produced by the cement hydration process. In doing so, this creates additional hydration products within the capillary pores and blocks them, effectively shutting down moisture vapor movement through the concrete.
Manufactured with deionized water to remove trace mineral ions and containing no chloride based materials, our products will not promote nor contribute to corrosion of embedded or reinforcing steel.
MVRA 900 Uses
ISE Logik Industries MVRA 900 has been specifically formulated for use in normal and light weight concrete mixes to produce low permeability concrete across a wide spectrum of mix designs. Typical uses of ISE Logik Industries MVRA 900 include but are not limited to:
|
MVRA 900 Features and Benefits
Each manufactured lot of our products is produced under some of the most exacting chemical manufacturing processes available, using only deionized water as its base ingredient. Deionized water guarantees that all steps to prevent the unwanted introduction of chloride and sulfate into the concrete batching sequence are being taken. Further, ISE Logik Industries MVRA 900 is the only product that independently performance tests in hardened concrete each and every manufactured lot against the following standards, prior to shipment:
|
Concrete Water Proofing Admixture - CWPA 800
Specifically formulated for use in normal and light weight concrete mixes to produce low permeability concrete across a wide spectrum of mix designs, CWPA 800 is used in but not limited to elevator pits, retaining walls, foundations, water retaining structures (pools, cisterns, dams, etc.), footings, and other underground structures.
CWPA 800 Features and Benefits
- Completely blocked water migration through hardened concrete Per CRD C48-92
- Reduced Permeability (per ASTM D5084) - 98% less permeable as compared to non-treated control specimen
- Protects against alkali and efflorescence attack from the concrete
- Inhibits corrosion due to decreased permeability of concrete
- Mitigating Effect on ASR (per ASTM C1260) - 10% reduction of effects of ASR compared to control specimen
- Mitigating Effect on Shrinkage (per ASTM C157) - 10% shrinkage reduction by day 28 from casting of specimen
- Reduces slab warp, plastic shrinkage cracking and crazing
- Rapid Strength Gain (per ASTM C39/39M) - Achieves design strength in three days after casting of specimen due to internal curing
- No thermal cracking
- Type S Admixture (per ASTM C494/C494M) Certified
{{this.show}} {{this.hide}} ISE Logik Industries Topical Applied Products
Moisture Vapor Barrier Adhesive for Resilient Flooring - MVBA 500
Featuring unlimited moisture control from both topical liquids and substrate vapor with no moisture testing required!
ZERO time added to job for moisture mitigation!
MVBA 500 Features and Benefits
- Simple 1-part system
- Strong early grab, fastcuring formula
- High-strength, waterproof bond
- Self-leveling technology reduces telegraphing
- Intact vapor retarder membrane NOT required
- LEED v4 contributing
- CDPH/EHLB Standard
- Method v1.2
- Meets SCAQMD Rule 1168, 0.1 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
MVBA 500 Approved Flooring Types
- LVT/LVP
- Sheet goods (vinyl, homogeneous, heterogeneous, fiberglass, felt-backed)
- Rubber (tile and sheet)
- Linoleum
- WPC/WSC
- Cork-backed hard surface
- Cork flooring
- Cork underlayment
- VCT/VET
- Stair treads (rubber and vinyl)
Moisture Vapor Emission Control - MVEC 710
Featuring unlimited moisture control with no moisture testing required!
NO shot blasting required !
MVEC 710 Features and Benefits
- No costly moisture testing required
- 1-part system increases ease of install
- Blocks moisture to 100% RH and no limit on MVER (moisture vapor emission rate)
- pH blocker protects from alkali attack
- Fast, 8-hour cure time improves efficiency
- LEED v4 contributing
- CDPH/EHLB Standard Method v1.2
- Meets SCAQMD Rule 1168, 0.05 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
MVEC 710 For Glue Down Application
STEP 1. MVEC 710 Moisture Vapor Barrier
STEP 2. MVBP 600 Bond Promoter
STEP 3. TAYLORâ„¢ Flooring Adhesive
Moisture Vapor Bond Promoter - MVBP 600
Encapsulate existing adhesive residue and transform difficult-to-bond-to surfaces into bondable surfaces with MVBP 600.
MVBP 600 Features and Benefits
- Cures to a textured, highly bondable surface
- Encapsulates old
adhesive residue (including cutback) - pH blocker protects from alkali attack
- Seals porous substrates (including gypcrete)
- LEED v4 contributing
- CDPH/EHLB Standard Method v1.2
- Meets SCAQMD Rule 1168, 0.05 g/L
- Does not contain methylene chloride and perchloroethylene
- Contributes to low emitting materials
MVBP 600 For Glue Down Application
STEP 1. MVEC 710 Moisture Vapor Barrier
STEP 2. MVBP 600 Bond Promoter
STEP 3. TAYLORâ„¢ Flooring Adhesive
{{this.show}} {{this.hide}} Literature
{{this.show}} {{this.hide}} Projects
The Deaconess Health System
Project: Deaconess Clinic Downtown - 100,000 sq ft
Project Address: 120 SE 4th St. Evansville, IN 47747
Date of Substantial Completion: May 15, 2020
Architect: SLAM
Construction Manager: Barton Malow https://www.bartonmalow.com/
Concrete Contractor: Superior Concrete Constructors
Ready Mix Producer: Irving Materials https://www.irvmat.com/
South Point Elementary
Location: Washington, MO
General Contractor: K&S Associates
Architect: Bond
Concrete Supplier: Franklin County Concrete
Concrete Contractor: Hawkins Construction and Flatwork
Product: MVRA 900 in concrete slabs for controlling moisture for flooring
Zumbrota, MN FORD
Location: Zumbrota, MN
Product: MVRA 900
General Contractor: Knutson Construction - Rochester Office
Supplier: Ready-Mix Concrete out of Rochester, MN
Ohio Health System Wide Emergency Departments
Location: Hilliard, OH
Product Used: MVRA 900
General Contractor: Elford
Jerry Jones – Family Hope Lodge Baylor University Medical Center
Location: Dallas, TX
General Contractor: McGough
Architect: Perkins & Will
Wake Forest University Baptist Medical Center
Location: Winston-Salem, NC
Product Used: MVRA 900
General Contractor: Rodgers Builders
Architect: HKS
Institute for Marine Mammal Studies
Location: Gulfport, MS
General Contractor: Wharton-Smith
Architect: Eley Guild Hardy
USM Marine Research Facility
Location: Gulfport, MS
Product Used: MVRA 900
General Contractor: Wharton-Smith
Architect: Eley Guild Hardy
Grant Medical Bone and Joint Center
Location: Columbus, OH
General Contractor: Daimler Group
Architect: NAC
UPMC Hamot Patient Tower
Location: Erie, PA
Product Used: MVRA 900
General Contractor: Turner
Architect: Bostwick Design
Bonita Canyon Elementary School – Irvine Unified School District
Location: Irvine, CA
General Contractor: Ledesma & Meyer Construction Company
Product Used: MVRA900
Ready Mix Supplier:Holliday Rock - Irvine, CA
Concrete Contractor: KAR Construction
Architect: Ruhnau Clarke
Tiverton Casino and Hotel
Location: Tiverton, RI
Product Used: MVRA 900
General Contractor: Gilbane
Architect: JCJ
Cleveland Municipal District PK-8
Location: Cleveland, OH
General Contractor: Albert M. Higley
Architect: Robert P. Madison Intl
Notre Dame Indoor Athletics Center
Location: South Bend, IN
Product Used: MVRA 900
General Contractor: Barton Malow
Northwood High School Athletics Center
Location: Nappanee, IN
Product Used: MVRA 900
General Contractor: Brown & Brown
Architect: Barton-Coe Vilamaa
St Charles County Detention
Location: 301 N 2nd St. St Charles, MO 63301
Product Used: MVRA 900
General Contractor: McCarthy Building Companies
Architect: DLR Group
Ready Mix Producer: Kienstra
Mount Carmel Hospital
Location: Grove City, OH
Product Used: MVRA 900
General Contractor: AECOM Hunt
Architect: Gresham Smith
Micron Center for Materials Research
Location: Boise, ID
Product Used: MVRA 900
General Contractor: Hoffman
Architect: Hummel
Townplace Suites
Location: 1500 Charlotte Ave. Nashville, TN 37211
Product Used: MVRA 900
General Contractor: Crain Construction Inc.
Ready Mix Producer: Nashville Ready Mix
Livingston Ambulatory Center
Location: Columbus, OH
Product Used: MVRA 900
General Contractor: Gilbane
Architect: NBBJ
ELEVEN on the river
Location: Minneapolis, MN
Product Used: MVRA 900
General Contractor: Ryan Companies
Architect: Robert A.M. Stern
Ready Mix Producer: Aggregate Industries
Lancaster Tallmadge & Medill Elementary Schools
Location: Lancaster, OH
Product Used: MVRA 900
General Contractor: Summit Construction
Architect: Braun & Steidl
Arcola Elementary
Location: 351 W Washington St. Arcola, IL 61810
Product Used: MVRA 900
General Contractor: Petry-Kuhne Co.
Architect: Graham & Hyde Architects
Glenview Ice Arena
Location: 1851 Landwehr Road in Glenview
Product Used: MVRA 900
Architect: Williams Architects
General Contractor: W. B. Olson
Ready Mix company: Prairie Material
Concrete Subcontractor: Tor Construction
Heritage West Athletic & Learning Complex
Location: Louisville, KY
Architect: Moody Nolan
Product Used: MVRA 900
General Contractor: Calhoun Construction
Concrete Contractor: FA Wilhelm
Concrete Producer: Advance Ready Mix Concrete
Hyundai Warehouse - Champaign IL
Location: 1101 Newton Dr., Champaign, IL 61821
Product Used: MVRA 900
Architect: JSM Development
General Contractor: Dodds Company
Concrete Contractor: Mid Illinois Concrete & Excavating
Concrete Ready Mix Supplier: Blager Concrete
Last Update: 2021-02-23