Metal Roofing and Soffit Panels

SNAP-CLAD metal panels feature architectural roofing panel aesthetics as well as structural metal panel performance. SNAP-CLAD panels, produced in continuous lengths, are corrective leveled to provide superior flatness and feature an optional factory-applied sealant bead for improved weather resistance. Maximum panel length is 64 feet and minimum panel length is 4 feet. SNAP-CLAD roofing panels feature a 1-3/4" leg height and a continuous interlock for improved structural performance and wind resistance. A concealed fastener clip system allows for thermal expansion/contraction while providing extraordinary hold-down strength. Two clips are available: a standard clip for most mansard and fascia applications and a high-performance clip for roofing application and UL 90 rated assemblies.

PAC T-250 panels are factory-formed or field-formed to length and field-seamed. The panels have been designed for application over a wide variety of substrates on roof slopes as low as 1/2 : 12. PAC T-250 panels can be produced in 22 and 24 gauge steel or .032 and .040 aluminum. The PAC T-250 panel combines structural performance with architectural aesthetics. PAC T-250 panels feature a 2.625" nominal finished panel height from the deck that requires mechanical field seaming after installation. The panels have a continuous and/or intermittent concealed-fastener clip system designed to allow for thermal expansion/contraction. Sealant beads are factory-applied to the seam cover.

Roll-formed metal panels are designed and produced for commercial and residential applications. This declaration is intended for business-to-business applications (B2B).

Panels are custom roll-formed from coils of steel or aluminum to fit a variety of roof and wall applications. The panels can be factory-formed (Figure 1) or formed on the job site using a mobile roll former (Figure 2) or a combination of both. The metal panels offer long-term durability and come in a broad pallette of colors and finishes to maximize design options. A wide range of panel profiles is available to meet building code and aesthetic requirements.

Petersen provides versatile exposed fastener panels for roofs, walls, and equipment screens, including 7.2, R-36, and Corrugated options. M-42 panels are Texas-exclusive. Flashing uses PAC-CLAD materials with a 35-year warranty. Vinyl masking is advised for extra handling. M-36 and M-42 panels are unsuitable for metal buildings or structural roofs; consult Petersen for guidance.

HWP panels are one of 12 architectural wall panel profiles in the Precision Series, blending bold aesthetics with cost-effective installation. Metal panels feature a ⅞" depth and can be intermixed for creative flexibility and installed both vertically and horizontally. A perforated aluminum option can diffuse light and sound or add visual interest.

The Highline B1 architectural metal wall panel has an alternating wide and narrow rib pattern that creates dramatic shadow lines. Highline B1 mixes easily with other Precision Series profiles and can be installed horizontally or vertically. Perforated aluminum options are also available. Highline panels, with 1 3/8-in. depth and multiple widths, provide bold visual effects for exteriors.

The Highline B2 architectural metal wall panel features an alternating wide and narrow rib pattern, producing striking shadow lines. It seamlessly integrates with other Precision Series profiles and can be installed horizontally or vertically. Available in perforated aluminum, its 1 3/8-inch depth and multiple width options create bold visual appeal for exterior applications.

The Highline C1 architectural metal wall panel showcases a consistent rib pattern, creating dramatic shadow lines. It effortlessly pairs with other Precision Series profiles and allows for horizontal or vertical installation. Offered in perforated aluminum, its 1 3/8-in. depth and various width options deliver a bold, modern aesthetic for exterior applications.

The Highline C2 architectural metal wall panel features a uniform rib pattern, producing striking shadow lines. It seamlessly integrates with Precision Series profiles and supports horizontal or vertical installation. Available in perforated aluminum, its 1 3/8-inch depth and multiple width options create a bold, modern look, enhancing exterior applications with style and versatility.

The Highline S1 architectural metal wall panel has a uniform rib pattern that creates dramatic shadow lines. Highline S1 mixes easily with other Precision Series profiles and can be installed horizontally or vertically. Perforated aluminum options are also available. Highline panels, with 1 3/8-in. depth and multiple widths, provide bold visual effects for exteriors.

The Highline S2 metal wall panel showcases a consistent rib pattern, casting bold shadow lines. It pairs effortlessly with other Precision Series profiles and allows horizontal or vertical installation. Offered in perforated aluminum, its 1 3/8-inch depth and various width options create a sleek, modern aesthetic, enhancing exterior designs with durability and architectural appeal.

The Highline M1 metal wall panel showcases a consistent rib pattern, casting bold shadow lines. It pairs effortlessly with Precision Series profiles and allows horizontal or vertical installation. Offered in perforated aluminum, its 1 3/8-inch depth and various width options create a sleek, modern aesthetic, enhancing exterior designs with durability and architectural appeal.

The Box Rib 2 metal wall panels are 1-3/8 in. deep and feature 87-degree rib angles, creating striking shadow lines for a bold design and cost-effective installation. Panels can be installed horizontally or vertically, intermixing profiles like Highline and HWP. A perforated aluminum option can diffuse light and sound or add visual interest.

The Box Rib 3 metal wall panels are 1-3/8 in. deep and feature 87-degree rib angles, creating striking shadow lines for a bold design and cost-effective installation. Panels can be installed horizontally or vertically, intermixing profiles like Highline and HWP. A perforated aluminum option can diffuse light and sound or add visual interest.

The Box Rib 4 metal wall panels are 1-3/8 in. deep and feature 87-degree rib angles, creating striking shadow lines for a bold design and cost-effective installation. Panels can be installed horizontally or vertically, intermixing profiles like Highline and HWP. A perforated aluminum option can diffuse light and sound or add visual interest.

The Board and Batten wall panel system offers timeless elegance for residential and commercial spaces. Featuring concealed fasteners, it combines wide vertical boards and narrow battens for clean lines and dimensional interest. With a versatile design, it complements various architectural styles, creating cozy facades or bold statements with modern sophistication.

The PAC-CLAD Modular AL metal panel system from Petersen empowers architects and designers to create unique metal cladding surfaces using panels of various sizes and depths in multiple colors. Choose standard panel sizes or define dimensions and depths to create truly unique, flexible and eye-catching patterns. Stacked, running bond and mosaic designs are possible.

PAC-4000 is a 4mm composite panel system made by bonding a prefinished aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer, providing thermal stability and panel balance. PAC-4000 is an exterior cladding designed for walls, canopies, fascia and accents on all commercial building types.

PAC-4000 is a 4mm composite panel system made by bonding a prefinished aluminum skin to a substrate of thermoset phenolic resin. A second aluminum skin is added as a backer, providing thermal stability and panel balance. PAC-4000 is an exterior cladding designed for walls, canopies, fascia and accents on all commercial building types.

Petersen's composite wall panels offer design flexibility, high performance, and visual appeal for commercial and retail spaces. PAC-3000 CS panels feature a .020 face and back skin thermobonded to a polyethylene or fire-retardant core. Precision fabrication ensures accuracy, while staggered angle clips allow individual installation.

Petersen's composite wall panels offer design flexibility and high performance for commercial applications. The PAC-3000 RS rain-screen system eliminates caulk, using clean reveals for a sleek look. Made from metal composite material, it features diverse finishes and a free-floating installation for enhanced aesthetics and durability.

Petersen offers a variety of exposed fastener panels, including the 7.2, R-36, and 7/8" Corrugated, suitable for roofs, walls, and linear panels. M-36, M-42, and 1/2" Corrugated are ideal for wall and equipment screen projects. Trim options include PAC-CLAD aluminum and steel, with a 35-year warranty and vinyl masking for protection during fabrication.

Petersen provides versatile exposed fastener panels for roofs, walls, and equipment screens, including 7.2, R-36, and Corrugated options. M-42 panels are Texas-exclusive. Flashing uses PAC-CLAD materials with a 35-year warranty. Vinyl masking is advised for extra handling. M-36 and M-42 panels are unsuitable for metal buildings or structural roofs; consult Petersen for guidance.

Petersen provides cost-effective, architecturally appealing exposed fastener panels for versatile applications, including roofs, walls, and equipment screens. Panels like 7.2, R-36, and 7/8" Corrugated cater to diverse needs. Trim is fabricated from PAC-CLAD aluminum or steel, offering a 35-year finish warranty. Vinyl masking is recommended for extra handling, removed post-installation.

Petersen offers a range of exposed fastener panels, including 7.2, R-36, 7/8" Corrugated, M-36, M-42, and 1/2" Corrugated, suitable for roofing, walls, and equipment screens. Trim and flashing are fabricated from PAC-CLAD aluminum or steel, with a 35-year finish warranty. Vinyl masking is recommended during fabrication to protect panels.

The versatile Box Rib 1 metal wall panels are 1-3/8 in. deep with a nominal 12-in. width and feature 87-degree rib angles, creating dramatic shadow lines. Panels can be installed horizontally or vertically, intermixing profiles like Highline and HWP. A perforated aluminum option can diffuse light and sound or add visual interest.

PAC-Tite Gold Gutters are top-of-the-line, offering easy installation, outstanding performance and an attractive appearance. They include a 2" wide external wind strap to be installed every 6' and gutter straps every 24" O.C. to comply with the ANSI/SPRI GT-1 Standard. They also feature a unique, heavy aluminum gutter strap design that eliminates the need for drilling and riveting. The free-floating, hook-in strap allows for full thermal movement of the gutter. Offered with an optional roof flange or slotted drain bars for ballast retention, PAC-Tite Gold Gutters offer maximum roof drainage.and application time in half with this one-of-a-kind edge metal solution.

PAC-Tite Gold Gutters are top-of-the-line, offering easy installation, outstanding performance and an attractive appearance. They include a 2" wide external wind strap to be installed every 6' and gutter straps every 24" O.C. to comply with the ANSI/SPRI GT-1 Standard. They also feature a unique, heavy aluminum gutter strap design that eliminates the need for drilling and riveting. The free-floating, hook-in strap allows for full thermal movement of the gutter. Offered with an optional roof flange or slotted drain bars for ballast retention, PAC-Tite Gold Gutters offer maximum roof drainage.and application time in half with this one-of-a-kind edge metal solution.

PAC-Tite Gold Gutters are top-of-the-line, offering easy installation, outstanding performance and an attractive appearance. They include a 2" wide external wind strap to be installed every 6' and gutter straps every 24" O.C. to comply with the ANSI/SPRI GT-1 Standard. They also feature a unique, heavy aluminum gutter strap design that eliminates the need for drilling and riveting. The free-floating, hook-in strap allows for full thermal movement of the gutter. Offered with an optional roof flange or slotted drain bars for ballast retention, PAC-Tite Gold Gutters offer maximum roof drainage.and application time in half with this one-of-a-kind edge metal solution.

PAC-Tite Gold Gutters are top-of-the-line, offering easy installation, outstanding performance and an attractive appearance. They include a 2" wide external wind strap to be installed every 6' and gutter straps every 24" O.C. to comply with the ANSI/SPRI GT-1 Standard. They also feature a unique, heavy aluminum gutter strap design that eliminates the need for drilling and riveting. The free-floating, hook-in strap allows for full thermal movement of the gutter. Offered with an optional roof flange or slotted drain bars for ballast retention, PAC-Tite Gold Gutters offer maximum roof drainage.and application time in half with this one-of-a-kind edge metal solution.

Features

• Accommodates the drainage of roof areas

• Gutter straps securely support larger volumes of water, as well as extreme snow and icing conditions and is manufactured to rigid tolerances and furnished per required drainage capacity/size.

• Adapts easily to optional drainage bars or flow through gravel stops

• Provided in 10'-0" to 20'-0" lengths. (Custom lengths available - Contact Petersen Aluminum)

  
  

Features

• Accommodates the drainage of roof areas

• Gutter straps securely support larger volumes of water, as well as extreme snow and icing conditions and is manufactured to rigid tolerances and furnished per required drainage capacity/size.

• Adapts easily to optional drainage bars or flow through gravel stops

• Provided in 10'-0" to 20'-0" lengths. (Custom lengths available - Contact Petersen Aluminum)

Features

• Manufactured with simple connection configurations

• Includes three attachment straps per 12' section

Features

• Manufactured with simple connection configurations

• Includes three attachment straps per 12' section

Features

• Accommodates the drainage of roof area

• Provided in 10'-0" lengths

Feature

• Accommodates the drainage of roof area

• Provided in 10'-0" lengths

Check out the variety of custom-designed Scuppers and Collector Boxes that meet the performance requirements of architects and contractors. Their unique design provides maximum security and performance to protect against leaks and is a decorative and functional means of water control.

Check out the variety of custom-designed Scuppers and Collector Boxes that meet the performance requirements of architects and contractors. Their unique design provides maximum security and performance to protect against leaks and is a decorative and functional means of water control.

Petersen offers several wall and soffit profiles for perforation in a nearly endless combination of hole sizes and patterns to complement virtually any architectural design or need. Perforated metal can provide a contrasting look with any non-perforated metal to create visual interest on any project. Perforated panels can be specified to diffuse light, air or sound, or simply for architectural flair. Maximum open area and hole size limitations apply for roll-formed panels. Typical applications include equipment screens, partitions, sign panels, parking decks, guards, interior acoustical applications and enclosures of any kind. Aluminum can be perforated for any project. An extra charge is applied for perforation. Check with local facility for specific panel profiles that can be perforated.

PAC-CLAD HT from Petersen is a self-adhering, high-temperature roofing underlayment designed to provide premium waterproofing protection for a variety of roofing applications. PAC-CLAD HT underlayment offers protection against water and ice damming while withstanding extreme weather conditions. The self-adhering qualities of PAC-CLAD HT reduces labor costs and installation times while providing increased protection compared to that of typical felt roofing underlayments. This strong, skid-resistant high-tensile-strength rubberized asphalt membrane is available in either black or white.

H-Shield is a rigid roof insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to fiber reinforced facers on each side (GRF).

H-Shield NB is a rigid roof insulation composite panel composed of a closed-cell polyisocyanurate foam core manufactured on-line to a fiber reinforced facer on one side and either 7 ⁄16" or 5 ⁄8" oriented strand board (OSB) on the other. H-Shield NB can also be manufactured off-line bonded to 5 ⁄8" or 3 ⁄4" plywood.

H-Shield HD is a 1 ⁄2" thick high-density polyiso insulation panel specifically designed for use as a cover board. It is manufactured on-line to a premium performance coated glass facer on both sides (CGF). H-Shield HD delivers an R-value of 2.5 in its 1 ⁄2" profile; significantly higher than roof cover boards made with other materials such as wood fiber or gypsum.

H-Shield CG is a rigid roof insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to a premium performance coated glass facer on both sides (CGF).

H-Shield HD Composite CG is composed of two products, H-Shield HD - a 1⁄2" high-density polyiso cover board, manufactured on-line to H-Shield CG - a premium performance faced polyiso - creating a monolithic composite panel (CGF). This product is ideal for commercial roofing projects that require high thermal efficiency combined with maximum durability in both new construction and retrofit applications. R-value is optimized with a thinner profile than other insulations available on the market

Metal cladding adds visual punch to exterior of Texas university housing Historically, the University of Texas at San Antonio, with an enrollment of almost 30,000, has been considered a commuter school for area students. That has been changing as it has begun placing more emphasis on on-campus activities and increasing...

New Texas school built for the future including its metal-clad exterior

This vacation villa right on Great Cruz Bay, on St. John in the U.S. Virgin Islands, has gone from eyesore to landmark, thanks to a major restoration following Hurricane Irma's direct hit on the island in 2017. That storm severely damaged the home's roof, which was already in need of structural repair, and underscored the need to seal in its largely open-to-the-elements floor plan more securely. The finished result makes the most of the stunning location – the owners have rechristened the place “C'est la Sea," which could be any Francophone's utterance upon arrival. Its new, stunning blue metal roof stands out against the island's green hills and has made the place a navigational aid and spawned a raft of imitators in the process.

New metal-clad apartment complex brings public access to St. Paul riverfront

Earning continuing education credits is a vital component of membership in many professional organizations, which require members to earn credits to maintain their good standing. Continuing education courses provide architects, designers and other construction professionals the opportunity to earn the credits required to achieve their goals.