What's New: Week of 12/07/2025

Give your garage a tactical look with FDE cabinets

Royal Corinthian manufactures a cellular PVC railing system that is as close to maintenance free as possible, which is why it comes with a lifetime warranty. The RoyalGuard railing is comprised of a thick PVC casing that is reinforced with an aluminum channel. This results in a structural railing system. The railing comes in a white color that fully permeates each particle of PVC and is UV stabilized.

Features:

• Available in kits, components, and ready to install pre-built sections.

• Integral matte White finish; no painting required.

• Rail spans up to 12'.

• Newel Post sleeve fits over a pressure-treated 4 x 4 or post mount.

• Durable, low maintenance.

• Concealed hardware.

• Insect and weather-proof.

• 25 Year Limited Warranty.

• Rail Heights up to 42".

• Standard square and rectangular Chippendale panels.

• Custom Chippendale panels.

CUSTOMIZATION: Combine panels, pickets/balusters to design any railing combination!

Royal Corinthian has been manufacturing exterior corbels or brackets for nearly 30 years from PVC, FRP, fiberglass, synthetic stone, cast stone, GFRC, lightweight cast stone, and high-density polyurethane. These materials, unlike wood, concrete, and metal, will not rot, split, crumble, crack, rust, or get infested, which is why we warranty these products for life. Some of these materials are paint-grade, while others do not require painting and can emulate wood, stone, metal, and virtually any traditional product. These architectural elements are sometimes referred to as outlookers, outriggers, or rafter tails. We add new products on a weekly basis so feel free to reach out if none of these brackets work for you. In addition, customization and historic replication is our forte. We are virtually unlimited by style and size. Since we make our own tooling, customization is relatively inexpensive, and some of our materials don't require tooling, so custom has become increasingly affordable through Royal Corinthian. In fact, all of these products were at some point custom and are now standard.

In addition to our RoyaLite™ FRP fiberglass and RoyalThane polyurethane cornice, we offer cornice in our other materials: RoyalStone™ Synthetic Stone, RoyalCast™ Composite Fiberglass, and RoyalPVC Cellular PVC.

We don't devote an entire section to the latter 3 for the following reasons.  For simple paintable crown molding or cornice, the clear winner as far as availability, ease of use, and affordability is polyurethane. For pre-finished or paintable large, complex cornice or entablature of incredible strength per pound, the clear winner is our RoyaLite™ fiberglass cornice.

However, on occasion, Architects like a certain product and would prefer to use it for reasons of product consistency, robustness associated with weight, or simply preference. For example, many architects have specified RoyalStone™ cornice, door and window surrounds, pediments, and other faCade details in order to match our columns and/or balustrades.  We have the ability to match our RoyalStone™ products with our FRP products so we encourage Architects to consider both options.  The Architect is the one of vision and we are here to help realize that vision.  All of our products come with limited lifetime warranties so there is no wrong choice.

If you are interested in our RoyalStone™, RoyalCast™, or RoyalPVC cornice, you may read about the product composition in related product sections.  All of our products of a specific brand have the same material composition and properties.  For example, RoyalStone™ columns, balustrade systems, architectural components, and cornice are all made from the same material.

Our fiberglass cupolas are crafted to endure hurricane-force winds, heavy snow loads, and diverse environmental conditions. Constructed with a blend of metal and treated lumber, these materials fortify the structure, enhancing its stability and strength. This robust metal framework not only guarantees durability, but also offers a sturdy foundation, ensuring long-lasting security and is similar to our fiberglass cornice. By minimizing maintenance needs, our fiberglass cupolas, also referred to as awnings & canopies, prove to be a dependable, and economical choice for your architectural endeavors. These classical elements are historically found on homes, schools, churches, and municipal buildings. In addition to our standard architectural cupolas, we offer customization at affordable pricing. Please do not hesitate to reach out for any questions. Royal Corinthian manufactures a number of architectural products that can accompany cupolas including: domes, finials, cornice, columns, and more.  Please see our fiberglass cupola CADs below.

Royal Corinthian offers fiberglass rotundas that consist of a ceiling dome, cornice, and columns. An architect came to us with a vision for a bespoke rotunda to enhance a client's backyard oasis. By combining our top-tier fiberglass products with all the essential hardware, we assembled a complete kit that ensures easy installation. Today, that dream rotunda stands as a striking symbol of the perfect fusion of innovative design and exceptional craftsmanship. Royal Corinthian takes pride in building numerous custom rotundas, including this one. Architects with unique designs can reach out to Royal Corinthian and together we'll design and build a one-of-a-kind rotunda. We look forward to introducing new rotunda designs in the future and are excited to bring your vision to life.

Royal Corinthian offers over 350 decorative capitals for both round and square columns: Roman Corinthian, Temple of the Winds, Scamozzi, Roman Ionic, Greek Angular Ionic,  Greek Erechtheum, Greek Erechtheum with necking, Modern Composite, Empire, Empire with necking, and Roman Doric. In addition, we have the ability to manufacture custom capitals: Our in-house mold making department allows for us to be priced competitively even on custom products. All of our capitals are available from the same material as the shaft, whether you choose our RoyalCast composite fiberglass, RoyalStone synthetic stone, or RoyaLite “FRP" lightweight fiberglass. All of our capitals are available in all 3 composite materials. Decorative capitals add height to the column shaft unlike Tuscan and Doric caps which simply slide over the shaft (except for twist rope columns). For proper installation of decorative capitals, the column shaft needs to be cut at the neck or astragal. Typically a cut at neck is done by the factory but can also be done in the field. Since our decorative capitals sit on top of the astragal, they are load bearing; whereas, Tuscan and Doric, which slide over the uncut shaft, are purely decorative. In load bearing applications, the weight of the soffit/ceiling would bear down on the capital which in turn would bear down on the shaft that is sitting on top of the substrate/floor.

Royal Corinthian manufactures fiberglass “FRP" domes as well as high density polyurethane domes for both interior and exterior use. Polyurethane domes tend to be smaller, come in one piece, and come primed ready for final paint finish. Fiberglass domes range from smaller one piece units to very large multipiece units. The domes can be plant assembled or assembled on site. The segment line between each section can be left visible or filled in prior to priming and painting. 

Typically, our fiberglass domes come with a paintable white marine grade gelcoat but can come in a variety of colors, stone finishes, or granite finishes. Due to our in-house mold capabilities a custom dome is fairly inexpensive so please design or have us design a dome that suits your needs or vision.

Since we use PVC sheets, boards, and trim to make our PVC column wraps, we offer them for sale as well. Our PVC sheets come standard in thicknesses of 3/8", 1/2", 5/8", and 1" and are available up to 48" wide and 20' long. We are able to cut the sheets down to any size that you need and make boards to unlimited widths under 48″.

PVC sheets are a wood alternative that will not rot, crack, or split. The product comes standard in a white color and isn't shiny like vinyl. It is often used as siding and doesn't require painting. If you desire to paint the product, however, it accepts paint very well. We recommend 100% acrylic latex paint; other recommendations can be seen on our PVC column wrap installation instructions.

• 3/8" x 36" x 8', 9', 10', 12', 18'

• 3/8" x 48" x 8', 9', 10', 12', 18', 20'

• 1/2" x 32" x 8', 9', 10', 12', 18', 20'

• 1/2" x 36" x 8', 10', 12', 20'

• 1/2" x 40" x 8', 9', 10', 12', 18', 20'

• 1/2" x 48" x 8', 9', 10', 12', 18', 20'

• 5/8" x 48" x 8', 10', 12', 18'

• 1" x 24" x 8', 9', 10', 12', 18'

• 1" x 36" x 8', 10', 12', 20'

• 1" x 48" x 8', 9', 10', 12', 20'

Royal Corinthian offers the best faux wood beams. These products are made of tough, long-lasting polyurethane millwork and as a result, this material can withstand conditions that cause real wood beams to crack, split, rot, flake, and become insect infested. The beams are easy to install since they are hollow and lightweight. They come with multiple pattern options: natural wood grains, smooth grains, or heavy grain and texture. In addition we offer a hand hewn series adds craftsman style, while the rustic series comes with hammered iron simulate straps for a more classic look.

A major upside to these foam ceiling beams is that they can be painted or stained, making it possible to color match your faux wood beams to your existing trim or overall color palette. By adding affordable ceiling beams to your home increases the value of your house since it makes it more beautiful.

This gallery is a combination of our RoyalCast fiberglass, RoyalStone synthetic stone, RoyaLite FRP, and RoyalWrap PVC column wraps. All of our columns can be made in any of the 4 materials that we offer so if you like a particular project picture below, we can make that column for you from any of our materials. A big portion of our balustrade projects and cornice projects also have columns on them so if you don't see something you like in this gallery of projects, please take a look at those as well. We have manufactured and installed thousands of architectural column projects nationwide so if you don't see a photo that meets your expectations, please contact us for specific project pictures that we have in our files.

These project pictures are of RoyaLite™ Fiberglass Cornice manufactured by Royal Corinthian. For polyurethane cornice project pictures, please contact us. We have hundreds of standard fiberglass cornice options and we never shy away from custom. In fact, every standard cornice was once custom. Due to our in-house mold making department, custom designs are inexpensive. We manufacture cornice in a paint-grade version, an assortment of pre-finished colors, granite-like look, or with an actual stone-like finish that emulates natural stone.

This gallery is a combination of our RoyalThane™ polyurethane, RoyalStone™ synthetic stone, and RoyalCast™ fiberglass balustrade systems.(link to appropriate columns page) All of our balustrades are available in every material that we offer so if you like a particular project picture, we can make that style using any of the 3 material options that we offer. In fact, we can even mix and match our systems on a single project. For example, someone might want polyurethane on the rooftop for weight reasons and synthetic stone on the porch. We have furnished and installed thousands of balustrade projects, commercial and residential, across the country in all sorts of climates. If you do not see a balustrade picture that inspires you, please contact us for something specific that you are looking for. We have thousands of project pictures on file.

Welcome to our pergolas & arbors gallery. Our one of a kind structural fiberglass pergolas are available as stock kits, or custom designs at an affordable price. We can make our pergolas with a variety of finishes: smooth, textured, or even wood grain. Fiberglass pergolas are far superior than wood pergolas, and can withstand any climate. If you are seeking something specific, please contact us. We have hundreds of project pictures on file. 

Our fireplaces or fireplace surrounds are manufactured from GFRC or glass fiber reinforced concrete. The resulting product is a lightweight manufactured stone at a fraction of the cost and weight of natural stone. We are able to replicate terra cotta, limestone, sandstone, marble, travertine, and many other authentic stone varieties in a plethora of colors. Since our mantles, hearths, overmantles, legs, and the rest of the fireplace components are made using mold technology, we are able to offer very intricate fireplaces, that would cost an arm and a leg in natural stone, at affordable prices. The nature of GFRC makes our fireplace surrounds fire, weather, and crack resistant so these can even be installed outdoors. Please browse our gallery for inspiration: If you don't see a picture that captures your vision for a fireplace, we have hundreds more that we can show you. Since we make our own molds, a custom fireplace isn't that much more than a stock fireplace. In addition to GFRC, we are able to manufacture our fireplaces from synthetic stone, fiberglass, FRP, and polyurethane.