Elastomeric Membrane Roofing CAD Drawings
By downloading and using any ARCAT CAD drawing content you agree to the following license agreement.
Elastomeric Membrane Roofing - EPDM
B-1A EPDM - SecurEdge 200
B-3A EPDM - Deck-to-Deck Expansion Joint
MF-1A EPDM - SecurEdge 200
MF-2.1 EPDM - Mechanically Fastened EPDM Securement - Option 1
MF-2.2 EPDM - Mechanically Fastened EPDM Securement - Option 2 (RUSS)
MF-2.3 EPDM - Mechanically Fastened EPDM Securement - Option 3 (RUSS)
MF-2A EPDM - Mechanically Fastened EPDM Membrane Splice
MF-2A.1 EPDM - Mechanically Fastened EPDM Membrane Splice (25/30 Warranties)
MF-2B EPDM - Mechanically Fastened EPDM Membrane Splice Intersection
MF-2B.1 EPDM - Mechanically Fastened EPDM Membrane Splice (25/30 Warranties)
MF-2D EPDM - End Lap Splice
MF-6B EPDM - Roof Drain with Sump
MF-8A EPDM - Pressure Sensitive Pipe Seal
MF-8A.1 EPDM - Pressure Sensitive Pipe Seal with 20" Pressure Sensitive Cured Flashing
MF-8B EPDM - Field Fabricated Pipe Wrap
MF-8B.1 EPDM - Field Fabricated Pipe Wrap (25/30 Warranties)
MF-22 EPDM - Ridge Membrane Attachment
U-1A EPDM - SecurEdge 200
U-1A.1 EPDM - SecurEdge 200 (25/30 Warranties)
U-1B EPDM - SecurEdge 300
U-1B.1 EPDM - SecurEdge 300 (25/30 Warranties)
U-1C EPDM - SecurEdge 2000 & 3000
U-1D EPDM - SecurEdge Drip Edge Fascia
U-1D.1 EPDM - SecurEdge Drip Edge Fascia (25/30 Warranties)
U-1E EPDM - SecurEdge One-Piece Gravel Stop
U-1F EPDM - Metal Bar Edge Termination
U-2A EPDM - EPDM Membrane Splice
U-2A.1 EPDM - EPDM Membrane Splice (25/30 Warranties)
U-2B EPDM - EPDM Membrane Splice Intersection
U-2B.1 EPDM - EPDM Membrane Splice Intersection (25/30 Warranties)
U-2C EPDM - EPDM Membrane Splices at Angle Change
U-3A EPDM - Deck-to-Deck Expansion Joint
U-3B EPDM - Deck-to-Wall Expansion Joint
U-3C EPDM - Shear/Expansion Joint
U-5A EPDM - Curb Flashing - EPDM Membrane
U-5B EPDM - Curb Flashing - Pressure Sensitive Curb Wrap with 6" Tape
U-5C EPDM - Curb Flashing - With 20" Pressure Sensitive Cured Flashing
U-5D EPDM - Self-Flashing Curb
U-5E EPDM - New Self-Flashing Metal Curb
U-6A EPDM - Roof Drain
U-6B EPDM - Roof Drain - Reinforced Field Sheet with Sump Exceeding 3" per foot
U-6C EPDM - Sure-Seal Insert Drain
U-6D EPDM - Insert Drain Through Deck
U-6E EPDM - Sure-Seal Add-On Drain
U-8A EPDM - Pressure Sensitive Pipe Seal
U-8A.1 EPDM - Pressure Sensitive Pipe Seal with 90-mil Membrane or 25/30 Year Warranties
U-8B EPDM - Field Fabricated Pipe Wrap
U-8B.1 EPDM - Field Fabricated Pipe Wrap (25/30 Year Warranties)
U-8C EPDM - Flexible Penetration
U-8C.1 EPDM - Flexible Penetration (25/30 Year Warranties)
U-8D EPDM - Field Fabricated Hot Stack
U-8D.1 EPDM - Field Fabricated Hot Stack (25/30 Year Warranties)
U-9 EPDM - Membrane Terminations, PAGE 1 OF 2
U-9 EPDM - Membrane Terminations, PAGE 2 OF 2
U-12A EPDM - Parapet/Curb with Continuous Membrane
U-12B EPDM - Parapet/Curb with Separate Membrane
U-13A EPDM - Built-Up Roofing Tie-In Over Steel Roof Decking
U-13B EPDM - Built-Up Roofing Tie-In Over Concrete Roof Decking
U-13C EPDM - Tie-In to Existing EPDM Membrane
U-13D EPDM - EPDM Tie-In Over Concrete Deck
U-13E EPDM - Tie-In Shingled or Metal Panel Roof
U-13F EPDM - Tie-In Between New Carlisle Adhered & Ballasted Roof
U-13G EPDM - Tie-In Between New Carlisle Mechanically Fastened & Ballasted Roof
U-15A EPDM - Inside Corner Wall Flashing with RUSS (Option 1)
U-15B EPDM - Inside Corner Wall Flashing with RUSS (Option 2)
U-15C EPDM - Inside Corner with Continuous EPDM Wall Flashing
U-15D EPDM - Inside Corner with Separate EPDM Wall Flashing
U-15D.1 EPDM - Inside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties
U-15E EPDM - Outside Corner with Pre-Cut Pressure Sensitive Corner
U-15F EPDM - Outside Corner with Pressure Elastoform Flashing (2 Piece)
U-15G EPDM - Outside Corner with Pressure Elastoform Flashing (1 Piece)
U-15G.1 EPDM - Outside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties
U-16A EPDM - Pressure Sensitive Pourable Sealer Pocket
U-16A.1 EPDM - Pressure Sensitive Pourable Sealer Pocket (25/30 Year Warranties)
U-16B EPDM - Field Fabricated Pourable Sealer Pocket
U-16B.1 EPDM - Field Fabricated Pourable Sealer Pocket (25/30 Year Warranties)
U-16C EPDM - Extended Pourable Sealer Pocket
U-16C.1 EPDM - Extended Pourable Sealer Pocket (25/30 Year Warranties)
U-18A EPDM - Metal Scupper at Deck
U-20A EPDM - Lightning Rod at Parapet (Vertical Attachment)
U-20B EPDM - Lightning Rod at Deck Level
U-22 EPDM - Valley
U-24 EPDM - Sleeper
U-30 EPDM - I-Beam Penetration
Thermoset Membrane - EPDM
VGB-1.1 EPDM - VersiTrim 200
VGB-3.0 EPDM - Deck-to-Deck Expansion Joint
VGC-1.1 EPDM - VersiTrim 200
VGC-1.1A EPDM - VersiTrim 200 (25/30 Year Warranties)
VGC-1.2 EPDM - VersiTrim 300
VGC-1.2A EPDM - VersiTrim 300 (25/30 Year Warranties)
VGC-1.3 EPDM - VersiTrim 2000 & 3000
VGC-1.4 EPDM - VersiTrim Drip Edge Fascia
VGC-1.4A EPDM - VersiTrim Drip Edge Fascia (25/30 Year Warranties)
VGC-1.5 EPDM - VersiTrim One-Piece Gravel Stop
VGC-1.6 EPDM - Metal Bar Edge Termination
VGC-2.1 EPDM - EPDM Membrane Splice
VGC-2.1A EPDM - EPDM Membrane Splice (25/30 Year Warranties)
VGC-2.2 EPDM - EPDM Membrane Splice Intersection
VGC-2.2A EPDM - EPDM Membrane Splice Intersection (25/30 Year Warranties or 90mil Membrane)
VGC-2.3 EPDM - EPDM Membrane Splices at Angle Change
VGC-3.1 EPDM - Deck-to-Deck Expansion Joint
VGC-3.2 EPDM - Deck-to-Wall Expansion Joint
VGC-3.3 EPDM - Shear/Expansion Joint
VGC-5.1 EPDM - Curb Flashing - EPDM Membrane
VGC-5.2 EPDM - Curb Flashing - Quick-Applied Curb Wrap with 6" Tape
VGC-5.3 EPDM - Curb Flashing - with 20" Quick-Applied Cured Flashing
VGC-5.4 EPDM - Self-Flashing Curb
VGC-5.5 EPDM - New Self-Flashing Metal Curb
VGC-6.1 EPDM - Roof Drain
VGC-6.2 EPDM - Roof Drain - Reinforced Field Sheets with Sump Exceeding 3" per foot
VGC-6.3 EPDM - VersiGard Insert Drain
VGC-6.4 EPDM - Insert Drain Through Deck
VGC-6.5 EPDM - VersiGard Add-On Drain
VGC-8.1 EPDM - Quick-Applied Pipe Seal
VGC-8.1A EPDM - Quick-Applied Pipe Seal with 90mil Membrane or 25/30 Year Warranties
VGC-8.2 EPDM - Field Fabricated Pipe Wrap
VGC-8.2A EPDM - Field Fabricated Pipe Wrap (25/30 Year Warranties)
VGC-8.3 EPDM - Flexible Penetration
VGC-8.3A EPDM - Flexible Penetration (25/30 Year Warranties)
VGC-8.4 EPDM - Field Fabricated Hot Stack
VGC-8.4A EPDM - Field Fabricated Hot Stack (25/30 Year Warranties)
VGC-9.0A EPDM - Membrane Terminations, PAGE 1 OF 2
VGC-9.0B EPDM - Membrane Terminations, PAGE 2 OF 2
VGC-12.1 EPDM - Parapet/Curb with Continuous Membrane
VGC-12.2 EPDM - Parapet/Curb with Separate Membrane Flashing
VGC-13.1 EPDM - Built-up Roofing Tie-in Over Steel Roof Deck
VGC-13.2 EPDM - Built-up Roofing Tie-in Over Concrete Roof Deck
VGC-13.3 EPDM - Tie-In to Existing EPDM Membrane
VGC-13.4 EPDM - EPDM Tie-In Over Concrete Deck
VGC-13.5 EPDM - Tie-In Shingled or Metal Panel Roof
VGC-13.6 EPDM - Tie-In Between New Versico Adhered & Ballasted Roof
VGC-13.7 EPDM - Tie-In Between New Versico Mechanically Attached & Ballasted Roof
VGC-15.1 EPDM - Inside Corner Wall Flashing with RTS (Option 1)
VGC-15.2 EPDM - Inside Corner Wall Flashing with RTS (Option 2)
VGC-15.3 EPDM - Inside Corner with Continuous EPDM Wall Flashing
VGC-15.4 EPDM - Inside Corner with Separate EPDM Wall Flashing
VGC-15.4A EPDM - Inside Corner Flashing for Projects with 90mil Membrane or 25/30 Year Warranties
VGC-15.5 EPDM - Outside Corner with Pre-Cut Quick-Applied Corner
VGC-15.6 EPDM - Outside Corner with Quick-Applied Uncured EPDM Flashing (2 Piece)
VGC-15.7 EPDM - Outside Corner with Quick-Applied Uncured EPDM Flashing (1 Piece)
VGC-15.7A EPDM - Outside Corner Flashing for Projects with 90mil Membrane or 25/30 Year Warranties
VGC-16.1 EPDM - Quick Applied Pourable Sealer Pocket
VGC-16.1A EPDM - Quick Applied Pourable Sealer Pocket (25/30 Year Warranties)
VGC-16.2 EPDM - Field Fabricated Pourable Sealer Pocket
VGC-16.2A EPDM - Field Fabricated Pourable Sealer Pocket (25/30 Year Warranties)
VGC-16.3 EPDM - Extended Pourable Sealer Pocket
VGC-16.3A EPDM - Extended Pourable Sealer Pocket (25/30 Year Warranties)
VGC-18.1 EPDM - Metal Scupper at Deck
VGC-20.1 EPDM - Lightning Rod at Parapet (Vertical Attachment)
VGC-20.2 EPDM - Lightning Rod at Deck Level
VGC-22.0 EPDM - Valley
VGC-24.0 EPDM - Sleeper
VGC-30.0 EPDM - I-Beam Penetration
VGMA-1.1 EPDM - VersiTrim 200
VGMA-2.0A EPDM - Mechanically Attached EPDM Securement - Option 1
VGMA-2.0B EPDM - Mechanically Attached EPDM Securement - Option 2 (RTS)
VGMA-2.0C EPDM - Mechanically Attached EPDM Securement - Option 3 (RTS)
VGMA-2.1 EPDM - Mechanically Attached EPDM Membrane Splice
VGMA-2.1A EPDM - Mechanically Attached EPDM Membrane Splice (25/30 Year Warranties)
VGMA-2.2 EPDM - Mechanically Attached EPDM Membrane Splice Intersection
VGMA-2.2A EPDM - Mechanically Attached EPDM Membrane Splice Intersection (25/30 Year Warranties)
VGMA-2.3 EPDM - End Lap Splice
VGMA-6.0 EPDM- Roof Drain with Sump
VGMA-8.1 EPDM - Quick-Applied Pipe Seal
VGMA-8.1A EPDM - Quick-Applied Pipe Seal with 20" Quick-Applied Cured Flashing
VGMA-8.2 EPDM - Field Fabricated Pipe Wrap
VGMA-8.2A EPDM - Field Fabricated Pipe Wrap (25/30 Year Warranties)
VGMA-22.0 EPDM - Ridge Membrane Attachment
What is the Elastomeric Membrane Roofing CSI section and why are these CAD files important?
Elastomeric Membrane Roofing, categorized under CSI section 075300, is a critical component in modern construction, particularly for flat or low-slope roofs. This section provides CAD files that are indispensable for professionals seeking to integrate elastomeric membrane systems into their projects. The CAD content includes detailed drawings of membrane layouts, flashing details, edge terminations, and other critical components of an elastomeric membrane roofing system. These files serve as a blueprint for accurate design, ensuring that all system components are properly aligned and integrated with other building systems. The precision of CAD files helps in minimizing errors during installation and contributes to the overall durability and performance of the roofing system. Additionally, CAD resources facilitate effective collaboration among stakeholders by providing a clear visual representation of the roofing design, which can be easily shared and modified to suit specific project requirements. Thus, the CAD content under this section not only enhances design accuracy but also streamlines the planning and execution stages of elastomeric membrane roofing projects.
Frequently Asked Questions
What is the primary purpose of CAD files in Section 075300 - Elastomeric Membrane Roofing?
CAD files provide detailed drawings and layouts for elastomeric membrane roofing installations, which are essential for accurately planning, visualizing, and executing the roofing design in alignment with project specifications and site conditions.
How do CAD files assist in the installation process of elastomeric membrane roofing?
CAD files serve as precise guides for contractors and installers, ensuring that the elastomeric membrane is applied correctly over the roof substrate. These files include dimensions and material placement details, minimizing errors and ensuring compliance with design specifications.
Can CAD files be used to identify potential design conflicts in elastomeric membrane roofing projects?
Yes, CAD files enable professionals to identify and resolve potential design conflicts by providing a comprehensive visual representation of the roofing system, including interactions with other building components, before actual construction begins.
Why is it important for AEC professionals to access CAD files for elastomeric membrane roofing?
Access to CAD files is crucial for AEC professionals because it facilitates collaboration and coordination among architects, engineers, and contractors, ensuring that everyone works from the same accurate and up-to-date design information.
How do CAD files enhance the accuracy and efficiency of elastomeric membrane roofing cost estimations?
By providing precise measurements and material requirements, CAD files help in generating accurate quantity takeoffs and cost estimations, leading to more reliable budgeting and resource allocation for elastomeric membrane roofing projects.