Thermoplastic Membrane Roofing CAD Drawings
By downloading and using any ARCAT CAD drawing content you agree to the following license agreement.
Mechanically-Attached Roofing Systems - Assembly Illustrations
Das1 - Adhered Insulation in Asphalt
Das2 - Adhered Insulation in FTR-601 Adhesive
Das4 - Mechanically Fastened Insulation
Das10 - Adhered Insulation in FTR-601 Adhesive
Das12sp - Mechanically Fastened Cover Board and Adhered Insulation
Das13sp - Mechanically Fastened and Adhered Insulation
Das16sp - Mechanically Fastened Cover Board and Adhered Insulation
Das17sp - Mechanically Fastened and Adhered Inulation
Das18sp - Mechanically Fastened and Adhered Inulation
DBS1 - Ballasted System
Dmfs1 - Mechanically Fastened System
Thermoplastic Membrane - TPO-PVC
TPC-1.1 TPO - VersiTrim Drip Edge Fascia
TPC-1.2 TPO-PVC - VersiTrim Heat Weldable Drip Edge Fascia
TPC-1.3 TPO-PVC - Metal Bar Edge Termination
TPC-1.4 TPO-PVC - VersiTrim 200
TPC-1.5 TPO-PVC - VersiTrim 300
TPC-1.6 TPO-PVC - VersiTrim 2000 & 3000
TPC-1.7 PVC - Pressure-Sensitive PVC/KEE HP Cover Strip
TPC-2.0 TPO-PVC - Membrane Splice
TPC-2.1 TPO - Thermoplastic Membrane Splices
TPC-3.1 TPO-PVC - Deck-to-Deck Expansion Detail
TPC-3.2 TPO-PVC - Deck-to-Wall Expansion Detail
TPC-5.1 TPO-PVC - Curb Flashing with TPO or PVD Membrane
TPC-5.2 TPO-PVC - Coated Flashing with TPO or PVC Metal Curb Flashing
TPC-5.3 TPO-PVC - Curb Flashing with CFA TPO or PVC Curb Wrap Corners
TPC-5.4 TPO-PVC - Self-Flashing Curb
TPC-6.1 TPO-PVC - Roof Drain (Drain Sump up to 3" to 1 Horizontal Foot)
TPC-6.2 TPO-PVC - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal Foot)
TPC-6.3ATPO-PVC - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal Foot) - Option 2, PAGE 1 OF 2
TPC-6.3B PAGE 2 OF 2 TPO-PVC - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal Foot) - Option 2, PAGE 2 OF 2
TPC-6.4 TPO-PVC - Add-on Drain
TPC-8.1 TPO-PVC - Pre-Molder Flashing
TPC-8.2 TPO-PVC - Field Fabricated Pipe Flashing
TPC-8.3 TPO-PVC - Certified Pre-Fabricated Square Tube Wrap
TPC-8.4 TPO-PVC - Field-Fabricated Square Tube Flashing
TPC-8.5 TPO-PVC - Certified Pre-Fabricated Split Pipe Seal
TPC-8.6 TPO-PVC - Certified Hot Pipe Flashing
TPC-9.0A TPO-PVC - Membrane Terminations, PAGE 1 OF 2
TPC-9.0B PAGE 2 OF 2 TPO-PVC - Membrane Terminations, PAGE 2 OF 2
TPC-12.1 TPO-PVC - Parapet Flashing - Fastened into Deck
TPC-12.1A TPO-PVC - Parapet Flashing - Fastened into Wall
TPC-12.2A TPO - Parapet Flashing with PS RUSS, PAGE 1 OF 2
TPC-12.2B PAGE 2 OF 2 TPO - Parapet Flashing with PS RUSS, PAGE 2 OF 2
TPC-12.3 TPO-PVC - Coated Metal Wall Flashing
TPC-12.6 TPO-PVC - Parapet Flashing / No Adhesion - Any Height Option
TPC-12.7 TPO - VersiWeld QA TPO Parapet Flashing with TPO PS RUSS
TPC-12.8 TPO - VersiWeld QA Parapet Flashing with VersiWeld PS RUSS
TPC-13.1 TPO - TPO Tie-In to Built-Up Roofing Over Steel Roof Deck
TPC-13.2 TPO - TPO Tie-In to Built-Up Roofing Over Concrete Roof Deck
TPC-13.3 TPO-PVC - TPO/PVC Tie-in to Existing Single-Ply
TPC-13.4 TPO - TPO Tie-In to Existing EPDM Membrane
TPC-13.5 TPO - EPDM Tie-In on Concrete Deck
TPC-13.6 TPO-PVC - TPO/PVC Tie-In to Shingled Roof
TPC-13.7 TPO-PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Concrete Deck
TPC-13.8 TPO-PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Metal Deck
TPC-15.1 TPO-PVC - Pre-Molded Inside Corner Flashing
TPC-15.2 TPO-PVC - Field Fabricated Inside Corner Flashing
TPC-15.3 TPO-PVC - Inside Corner with Coated Metal Wall Flashing
TPC-15.4 TPO-PVC - Pre-Molded Outside Corner Flashing
TPC-15.5 TPO-PVC - Field Fabricated Outside Corner Flashing
TPC-15.6 TPO-PVC - Outside Corner with Coated Metal Wall Flashing
TPC-15.7 TPO-PVC - PVC or TPO Universal Corners - Combination Inside & Outside Corners
TPC-16.1 TPO-PVC - Molded Sealant Pocket
TPC-18.1 TPO-PVC - Scupper with Coated Metal
TPC-18.2 TPO - Scupper at Deck - TPO
TPC-18.3 PVC - Scupper at Deck - PVC/KEE HP
TPC-18.4 PVC - Scupper with VersiFlex PVC PS Cover Strip Flashing
TPC-20.1 TPO-PVC - Lightning Rod at Parapet (Vertical Attachment)
TPC-20.2 TPO-PVC - Lightning Rod at Deck Level
TPC-24 TPO-PVC - Sleeper Detail
TPMA-2.0A TPO-PVC - Membrane Securement
TPMA-2.0B TPO - TPO Membrane Securement with PS RUSS
TPMA-2.1 TPO-PVC - Mechanically Attached Membrane Splice
TPMA-2.2 TPO-PVC - Fastener and Plate Placement
TPMA-22 TPO-PVC - Ridge Membrane Attachment
Thermoplastic Membrane Roofing - PVC/Thermoplastic-Polyolefin Roofing
MF-2 PVC-TPO - Membrane Securement
MF-2.1 TPO - TPO Membrane Pressure Sensitive RUSS
MF-2A PVC-TPO - Membrane Splice
MF-2B PVC-TPO - Thermoplastic Membrane Splices
MF-8BT TPO
MF-22 PVC-TPO - Ridge Membrane Attachment
U-1A TPO - SecurSeal Drip Edge Fascia
U-1B PVC-TPO - SecurWeld Coated Drip Edge Fascia
U-1C PVC-TPO - Metal Bar Edge Termination
U-1D PVC-TPO - SecurEdge 200
U-1E PVC-TPO - SecurEdge 300
U-1F PVC-TPO - SecurEdge 2000 & 3000
U-1G PVC - Pressure Sensitive PVC/KEE HP Cover Strip
U-2A PVC-TPO - Membrane Splice
U-2B TPO SAT - Thermoplastic Membrane Splice
U-3A PVC-TPO - Deck-to-Deck Expansion Detail
U-3B PVC-TPO - Deck-to-Wall Expansion Detail
U-5A PVC-TPO - Curb Flashing with TPO or PVC Membrane
U-5B PVC-TPO - Curb Flashing with TPO or PVC Coated Metal
U-5C PVC-TPO - Curb Flashing with CFA TPO or PVC Curb Wrap Corners
U-5D PVC-TPO - Self-Flashing Curb with CFA TPO or PVC Curb Wrap Corners
U-6A PVC-TPO - Roof Drain (Drain Sump Up to 3" to 1 Horizontal foot)
U-6B PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot)
U-6C PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 1 of 2
U-6C and U-6C.1 PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 1 of 2
U-6C.1 PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 2 of 2
U-6D PVC-TPO - Add-On Drain
U-8A PVC-TPO - Pre-Molded Pipe Flashing
U-8B PVC-TPO - Field Fabricated Pipe Flashing
U-8C PVC-TPO - CFA Certified Pre-Fabricated Square Tube Wrap
U-8D PVC-TPO - Field-Fabricated Square Tube Flashing
U-8E PVC-TPO - CFA Certified Pre-Fabricated Split Pipe Seal
U-8F PVC-TPO - CFA Certified Hot Pipe Flashing
U-9 PVC-TPO - Membrane Terminations, PAGE 1 AND 2
U-9 PVC-TPO - Membrane Terminations, PAGE 1 of 2
U-9 PVC-TPO - Membrane Terminations, PAGE 2 of 2
U-12A PVC-TPO - Parapet Flashing - Fastened Into Deck
U-12A.1 PVC-TPO - Parapet Flashing - Fastened Into Wall
U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 AND 2
U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 of 2
U-12B.1 TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 2 of 2
U-12C PVC-TPO - Coated Metal Wall Flashing
U-12F PVC-TPO - Parapet Flashing/No Adhesion - Any Height Option
U-12G TPO SAT - TPO SAT Parapet Flashing with TPO RUSS (SAT, Self Adhereing Technology)
U-12H TPO SAT - TPO SAT Parapet Flashing with TPO SAT RUSS (SAT, Self Adhereing Technology)
U-13A TPO - TPO Tie-In to Built-Up Roofing Over Steel Roof Deck
U-13B TPO - TPO Tie-In to Built-Up Roofing Over Concrete Roof Deck
U-13C PVC-TPO - TPO/PVC Tie-In to Existing Single-Ply
U-13D TPO - TPO Tie-In to Existing EPDM Membrane
U-13E TPO - EPDM Tie-In on Concrete Deck
U-13F PVC-TPO - TPO/PVC Tie-In to Shingled or Metal Panel Roof
U-13G PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Concrete Deck
U-13H PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Metal Deck
U-15A PVC-TPO - Pre-Molded Inside Corner Flashing
U-15B PVC-TPO - Field Fabricated Inside Corner Flashing
U-15C PVC-TPO - Inside Corner with Coated Metal Wall Flashing
U-15D PVC-TPO - Pre-Molded Outside Corner Flashing
U-15E PVC-TPO - Field Fabricated Outside Corner Flashing
U-15F PVC-TPO - Outside Corner Flashing with Coated Metal Wall Flashing
U-15G PVC-TPO - PVC or TPO: Universal Corners - Combination Inside & Outside Corners
U-15GT TPO
U-16A PVC-TPO - Molded Sealant Pocket
U-18A PVC-TPO - Scupper with Coated Metal
U-18B TPO - Scupper at Deck - TPO
U-18C PVC - Scupper with Sure-Flex Non-Reinforced PVC/KEE HP Flashing
U-18D PVC - Scupper with Sure-Flex PVC/KEE HP PS Cover Strip Flashing
U-20A PVC-TPO - Lightning Rod at Parapet (Vertical Attachment)
U-20B PVC-TPO - Lighting Rod at Deck Level
U-24 PVC-TPO - Sleeper Detail
U-25A PVC-TPO - Contour Rib Typical Cross-Section
U-25B PVC-TPO
U-25C PVC-TPO
What is the Thermoplastic Membrane Roofing CSI section and why are these CAD files important?
The CAD content for the 'Thermoplastic Membrane Roofing' section provides comprehensive graphical representations that are essential for the precise design and installation of thermoplastic roofing systems. These files typically include detailed roof plans, cross-sectional views, and installation details that illustrate the integration of thermoplastic membranes with other roofing components. The CAD files help ensure that the roofing system is designed to meet specific performance criteria, such as water resistance, thermal efficiency, and UV stability. Additionally, they assist in visualizing the layout and identifying potential challenges in the installation process. By utilizing these CAD drawings, professionals can enhance the accuracy and efficiency of the design process, optimize material usage, and ensure compliance with building codes and standards. This section serves as a critical resource for those involved in the planning and execution of thermoplastic membrane roofing projects.
Frequently Asked Questions
What is the significance of CAD files for Thermoplastic Membrane Roofing?
CAD files are crucial for Thermoplastic Membrane Roofing as they provide precise, scalable drawings that detail the installation layout, dimensions, and construction details. This ensures accuracy in design and aids in efficient planning and execution on-site.
How do CAD files facilitate compliance with the CSI Section 075400 standards?
CAD files help ensure compliance with CSI Section 075400 by offering detailed visual documentation that adheres to industry standards. They include specific materials, thicknesses, and attachment methods mandated by the guidelines, reducing errors and rework.
Why are CAD files important for coordination among AEC professionals in roofing projects?
CAD files are essential for coordination among AEC professionals as they provide a common reference that can be easily shared and updated. This facilitates collaboration and communication among architects, builders, and engineers, ensuring that everyone is aligned on the project requirements and specifications.
Can CAD files be used to optimize material usage in Thermoplastic Membrane Roofing?
Yes, CAD files can be used to optimize material usage by allowing for precise quantity takeoffs and layout planning. This minimizes waste and ensures the efficient use of materials, which can lead to cost savings and a more environmentally friendly project.
How do CAD files aid in identifying potential issues before construction begins?
CAD files aid in identifying potential issues by providing detailed 2D and 3D representations of the roofing system. This visualization helps in spotting conflicts, design flaws, or installation challenges early in the planning phase, allowing for adjustments before construction starts.